White markings of points/scratches on layers

Similar Questions

• SCREEN BLACK WITH WHITE AFTER START POINTER

  I went on vacation and turned off my computer.  When I got home, I stupidly plugged in my blackberry storm, while the system was starting the system.  Now all I get is the black screen with the white pointer stupid.  I tried the solution of Task Manager and a few others who were listed in the similar questions to no prevail.  At one point I did a boot repair tool and he returned with it could not repair the iso standards, ico or something like that.  I did a system restore to an earlier date to before I left and that did not help.  Please help me.  Thank you.

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• White background on the imported photoshop layers.

  Hello and thanks for checking out this thread!

  So my problem is that when I import a psd into AE, the preview for each of my diaper is completely white. I think it's because the background is white, they should be showing a few white lines and a transparent background. The overview of all of the compositions are fine it's just the layers that are misbehaving and these are what I want to animate. The only layer that works is my text layer, it has a transparent background as it should. The Image is saved as RGB, do not know if this is important.

  I hope you can help my solve this problem. Thanks in advance!

  I took a peek. You use layers to shape for the corners. They come in correctly as masks. You must import the PSD as a composition by keeping the dimensions of the layer, and then open the publication. That's what you will get:

  

  I would have done all this in Illustrator, but in this case, Photoshop will work fine.

• Pen tool create in Illustrator - white unwanted between point to point

  I created a few thick curved lines with the pen tool.  But when I SAVE TO the WEB in PNG, it shows the "point to point" (beginning of line end of line) white and non-transparent like the rest of the background.  So, my logo has a lot of white space, I don't want.  It should be transparent.  What am I doing wrong?

  

  Objects have a fill applied. Remove this fill.

  Please read the manual on the fillings.

• Screen turns white with the pointer in the bottom RIGHT

  I know it will be a simple matter for a person.  I have a dv8 running Windows 7.  I have a terrible habit of pulling my pointer off screen to get in the way for the lower right corner of the screen.  When I do this it causes the screen to go empty.  How can I disable this feature!

  Hey, RedDirt,.

  Welcome to the Forum.

  You may together Aero Peek.  Aero Peek is used to clear your view so you can see your desktop - very convenient when you want - not so great when he surprises you.

  Whenever you drag your mouse over the part of the screen where the Aero Peek unclear bar is located, poof!  Close all of your open windows in the taskbar!

  Try this:

  Right click on Start--> (go to) properties--> the taskbar

  Down in the menu of the taskbar, where it says "Desktop Preview with Aero Peek."

  UNCHECK the checkbox

  Click on apply / OK

  Chart:
  

  

  I hope this helps!

  Congratulations come to those earning between them!

• Letterhead, that I created for my e-mail shows upward on my copies, but only appears as a white of largce point in the message from the Inbox of cylinder head.

  Op system is Windows XP Pro. I followed all the procedures in the Outlook Express 6.0 for the creation of the letterhead. I checked the HTML box.  What's wrong???

  Is - this "header" a signature?
   
  Note: The HTML Signatures must be less than 4 KB.
   
  Open a new Message window and create your signature. (Insert the graphic & text). Click on the Source tab (view |) Source Edit if not already checked). Highlight the complete source code and copy / paste into Notepad. File | Save under and in the file name field, save as htm, (i.e. Sig1.htm). It will be saved in My Documents by default. Go to tools | Options | Signatures. Click: File | Browse and insert your saved signature | Apply. You can now rename it if you wish.
   
  Of course, if the recipient reads in plain text, they don't see the it.

• point of window layers disappeared

  The benchmarks determined window appear layer (small dot of color) more.

  Do you know how to restore them?

  See replace your preferences

• Tecra M3 - black and white points

  IM problem with my Tecra M3,

  I have the Toshiba logo came fine.
  Then a bunch of black and white, (its windows when crashed and gives you option in safe mode) but you can't get out of the text, I only know because Ive delt with computers crashed before.

  Start windows XP SP 2 basically there is a white bar at points vertically and scroll down.
  Then finally goes blue screen of death and reboots.

  I changed the HARD drive with my old operating system if it is not a virus, I've agreed with the ram, which is 2 x 1 GB sticks.
  Ive tested individually and together, and yet I still get the same problem I mentioned above when I start my computer.

  If this isn't a virus or HARD drive, it is not the ram, what is the problem here? The screen looks fine with the toshiba logo (no points from top to bottom)

  What do I need to fix? What is broken?

  Someone who can help much apprciated.

  see you soon

  Why put 2 times in different threads on the same issue?
  Check this box:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=182726

• Definition of white/black Points using the tone curve

  I am trying to install white/black points using the tone curve, but when I try to drag one of the end points of the line in the tone curve tool, I can't move. Could those be locked somehow...?

  It is what it is supposed to do. Without the sliders, you work with the curve itself. Now, you have direct control of the curve and can drag any part of it. Have you thought in your white and black points using the whites and blacks in the base Panel while holding down the opt/alt key? I guess the reason why what he says point curve is because this icon is what allows you to curve to the point.

• Display Latitude E6510 does not. White screen with lines

  I was working on my Dell Latitude E6510 normally and after I finished I stopped him. I go to the city for about 2 hours and when I got home, I press the power button / stop and suddenly the screen is white with a few scratches on the side. Tried to feed him several times, nothing. Reconnect AC, battery, RAM, HARD drive, peripherals, still nothing.

  Output DisplayPort works without any problem.

  Output VGA works without any problem.

  You can see the pictures and the link to the video on YouTube of this problem.

  Any help or advice? Would be very grateful. Thank you.

  YouTube - Dell Latitude E6510 screen does not, lines, stripes, white

  

  I hope this helps. I have a Latitude E5410 I bought knowing that the LCD screen has a white screen or white veil or a matter of contrast high. I checked that the entire screen removable Panel or it deforming slightly likely to prevent the white veil to disappear, leaving me with a normal display. But I had to "hold my mouth just as it should be" OR I could lose visibility and I Whiteout reappear. I did troubleshooting from the LCD cable connection to the motherboard. I removed the cover of the LED/hinge and screws of the keyboard. I started the computer and put in the Setup (BIOS). After that I got the content of the screen, I removed the keyboard and waved the LCD cable connector. It was nice sitting. I replaced the keyboard and remove the bezel before display. I waved the display cable DC7TY to the small LED Council, but that did nothing. I turned off the computer.

  I unscrewed the 6 screws holding brackets LCD panel and hinge for the lid of the display, exposing the back of the display panel itself. On the right side, low on the Panel, I peeled back the glue 1/4 x 3/8 on the clear plastic covering the printed circuit board, exposing the flex cable going to the backlight. I spilled Brown lever that keeps the flex cable plugged into the connector on the plug, removed the cable, he moved several times to repeat, then hit the lever to keep it. With the LCD in this way exposed, I started the computer and entered in the Setup program. SUCCESS!  No amount of stirring or warping brought Whiteout. I've buttoned to the computer and came here for successful results.

  Your Dell may be different, but you can report if your symptoms or the results are different, and HOW EXACTLY became you a success. See you soon!

• White strip after rollover image centering

  Hey, Hi, Hello,

  Please, I have a few questions on my content in Adobe DW of centering. I have transferred the images from Photoshop to DW and do a card.

  www.kontado.EU

  But there are some difficulties with rollover image OR centering of the content - because I wanted to center the content in the middle of the page.

  When I use the tag < center > or < p align > tag, it's a white stripe when point your mouse on the image.

  I am a beginner so please, can you help me solve this problem?

  Thank you

  and Align are deprecated in modern code.  Which means that a lot of modern browsers don't support more.

  The PS is for images only.  Do not use PS to generate the code.  The code is too rigid and too unstable for use in the production sites.   It is only suitable for quick comps show the client until you rebuild your page layout in Dreamweaver.

  Start with one Starter pre-built CSS templates in Dreamweaver.

  File > new > templates starter...  See screenshot.  These layouts are all centered on wider screens.

  

  If you need a map image, use Hotspot of Dreamweaver Tools.

  Switch to the Design mode.

  

  Click on your image to the foreground.

  In the HTML (Ctrl + F3) Properties Panel, you will see tools hotspot - pointer, Rectangle, circle and polygon.

  Nancy O.

• How to distribute the layers?

  Hello

  I want a series of images (approximately 20) appear as a sort of slide show.  For some reason I cannot import as a sequence.   But my question is, is there

  behaviour, the effect or the utility that wil A) create a kind of slide show?  Or (B) is their way to automatically distribute a bunch of layers over time?  As to set a time interval and the beginning of each layer be evenly distributed between the beginning and the end.

  Thank you Paul

  [Select a layer group in the project Panel in the order that you want them to appear in the timeline panel, use create new model of selection or drag on an existing timeline, decide how much time each layer and move the CTI (current time marker) at this point, select all layers, set the out point of the layers by pressing alt/option +] right-click or go in the Animation menu and select keyframe Assistant > sequence layers.

  For more than one layer sequence text instructions in the search help field in the upper right corner of the AE and the study on this fundamental feature of EI.

• Change the background of the file .png transparent-white Uni

  Hello

  I use PhotoShop CC.  A colleague gave me a file .png with a transparent background.  I would like to change the solid background (white), but I didn't know how to do this.  If someone could tell me how, I would really appreciate it.

  I posted this on the forum of Photoshop because I believe that the .png file is a raster versus vector image, but if it's easier to do what I want in Illustrator, please let me know.

  Thanks in advance,
  Paul

  In fact that is not necessary as jpg does not support layers, so the file could be flattened and therefore would be left with a white background.

  In the layers panel, there is a command called flattening, it is also available in the top menu. Flatten the will merge all layers and change the background layer. Default background has a white background and doesn't support transparency, so on white background.

  The command merge just did the same thing but leaves the layer as a layer, allowing transparency in tact.

  I hope this helps...

• Preview in the browser web displays white screen

  Hi all:

  When I do a preview in the web browser, I get a blank white screen that points to a temporary location on my system.  Someone knows how to operate the my overview of the web browser? I tried to remove my preferences... nothing.

  Cp5

  Windows 7

  See you soon!

  Have you defined the location of publication record as a location approved in your Flash Global security settings?

  http://www.Infosemantics.com.au/Adobe-Captivate-troubleshooting/how-to-set-up-Flash-global - security

• Samplers colour - dark, clear &amp; grey point - how to adjust the curves

  Hi all

  I set myself dark, light & gray point in an image. Ask yourself how to adjust the curves based on the color samplers. I manually call the dialog box curve and select the dark feather and choose sampler no1, select cast and select no2 sampler, select gray feather and choose sampler no3. No idea how this can be done in the script?

  OK, I see one of the problems, and you noticed yourself, you just did not understand what is happening.  When using the pipettes in the curves Panel it does not matter if you use the black or white pipette first. You can set the white point and black point or reverse that order and you get the same curve. What is important is when you use the grey eyedropper. That should be used when both the white and black point has been resolved. If you set gray in the Middle, he gets thrown when you set the last point and you get the same curve, if you simply ignored the gray point total. In other words, if you do not set the last gray point said you in effect it at all.

  Notice in your video when you click on the sampler on the neck that the image is very cyan. It is only when you click the last sampler that color refers to something more normal. You can see the same thing in looking at just the curves. By clicking on the neck creates curves with long arcs. By clicking on the last sampler transformed into lines between the white and black point (because the gray point is deleted)

  Which brings back us to where the sampler are placed make a big difference. Skin tone is not when you want to set the gray point. I think you are using the mask of the luminance to calm the adjustment because the black and white points are also misplaced. The color of the blackhead is within 20 years. I think a better place would be under the jaw on the right side of the neck. Indeed, this region is already 0,0,0 so I would not put a black dot. The white Sampler is in 230 years. Parameter to white clips many of the wall at the top left.