White screen when you connect to the wide...

Similar Questions

• I used to get the Blue error screen when you connect to the wide I did the registry clean, but now, when you connect the computer stops with no error message.

  How can I fix it? or what is wrong now?

  Hi Stelana,

  If I understand correctly, the computer turns off when you want to disconnect.

  This behavior may be caused by this security software on the computer, or the computer might be infected with the virus.

  To refine the question, I suggest you try the following steps:

  Step 1: Disable the security software and test, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Activate security software once it's all done.

  Because this problem occurs after cleaning registry, critical registry keys may have been changed.

  Some programs available for free on the Internet may contain spyware, adware or virus. Only download and install programs from software publishers that you trust. Even if the website, that you download the program trust, you must also trust the Publisher of the program. For more information, see when to trust a software publisher.

  Please see the link below:

  Registry cleaners are needed?

  http://Windows.Microsoft.com/en-us/Windows-Vista/are-registry-cleaners-necessary

  Step 2: Run a scan online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

   

  You can follow the steps provided by Vincenzo Di Russo MVP to get rid of malware on your computer, please click on here.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Server 2012 R2 Remote Desktop Server - user session crashes when you connect to the wide

  From time to time, a user session hangs during registration out of the Windows 2012 RDS.

  This has happened for two different users. Whenever the session hangs with the message "signature" and the user can not log such as they appear with the same message by.

  I connected to the RDS as administrator, checked the Task Manager and found that an office application always work, such as Excel.

  When I complete the process of the office application and disconnect the user through the Task Manager, the user can log in again.

  I reinstalled the desktop software and still happens from time to time...

  Any suggestions?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• computer froze when you connect to the wide

  I had not changed anything on my laptop. For some reason when I tried to stop it but it froze in the registration form. The power button would not turn it off or do alt ctl led work. I had to pop in fact the battery to turn it off. Is that what I should be concerned or a problem somewhere, I need trouble?

  I would certainly run through the usual troubleshooting stop.

  Shutdown problems are usually caused by a program or process that won't come out gracefully. The program or process may be against malware, or may be legitimate (for example a pervasive like Norton or McAfee antivirus). If you use Norton or McAfee product, uninstall it and replace it with a better program like NOD32, Kasperksy or Avast (free). The Windows Firewall is enough for most people. Shutdown problems can also be caused by old/badly written drivers so make sure that all drivers are updated, especially on Windows Vista and Windows 7.

  A.the first step should always ensure that your computer is free of viruses/malware.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  B. If the computer is free of viruses/malware, the drivers are current, and no program Norton or McAfee is installed, then do boot minimum troubleshooting to see what program/process is the culprit:

  How to perform a clean boot in Vista and XP - http://support.microsoft.com/kb/331796
  How to perform a clean boot in Windows Vista or Windows 7 - http://support.microsoft.com/kb/929135

  C. Si you need more information, here's a troubleshooting utility excellent stop - http://www.aumha.org/win5/a/shtdwnxp.htm

  Standard caveat: If the problem is too difficult - and there is absolutely no shame in admitting it isn't your cup of tea - take the machine to a computer repair shop. This will not be your type of BigComputerStore/GeekSquad space of the place. Get recommendations from family, friends and colleagues.

  MS - MVP - Elephant Boy computers - don't panic!

• White screen when I turn on the Satellite M50

  I have intermittently just get a white screen when I turn on the computer. Usually, the problem is solved by turning off the computer and try again - but sometimes I get a white screen again.

  It seems to be linked to the use of external devices - can someone give me clear instructions on which expected/doesn't have to be connected when I start and shut down the computer? Or other suggested solutions?

  Thank you

  Hi Rachel

  Believe me; It's not easy to provide an exact solution and that's why we need to study a little ;)

  Have you checked if the graphics card driver update could solve the white screen issue?
  If not, try to download and install the latest graphics driver

  You second question on the laptop stop problems is known to me. Sometimes it happens on my laptop too. The LTCC is a part of the Norton antivirus application, which is still running in the background of the operating system.
  This strange box "close the program" might appear because this context process couldn t be closed automatically and so the operating system can not stop.

  Especially the new application installation might help you. But why don't you use Norton Antivirus? What makes the laptop very slow. I have used this app for a long time but now I use the freeware program called Antivir. Its free and in my opinion much better than the Norton Antivirus.

• How guys do you overcome (Mac Book and iMac) screen sizes with disabilities when creating scrolling effects, can work the same on both screens when you started with the iMac?

  How guys do you overcome (Mac Book and iMac) screen sizes with disabilities when creating scrolling effects, can work the same on both screens when you started with the iMac?

  Technically, since it's the same effect with the same settings, it works on both sizes. However, you need to test both is to decide if it will appear visually correct on both screens or not. On screens more wider/taller objects can appear earlier on the screen, it is advised to test again on both screens.

  See you soon,.

  Vikas

• Error 'the procedure entry point xmlTextReaderConstName' not found in the dynamic link library libxml2.dll when you connect to the computer

  Original title:

  I get this pop-up when I connect: 'the procedure entry point not found xmlTextReaderConstName in the dynamic link library libxml2.dll.'  What should I do to fix this?

  Hello

  1. are you able to connect next to this error?

  2. are you aware of any changes made to the computer, before the show?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you have finished the clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Method 2:

  Run a SFC system analysis and control for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  Follow these steps.

  a. open windows Explorer, navigate to the following location:

  For 64-bit.

  C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  For 32 bit,

  C:\Program Files \Common Files\Apple\Apple Application Support

  b. copy the file "libxml2.dll.

  c. open new windows Explorer, navigate to the following location:

  For 64-bit.

  C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support

  For 32 bit,

  C:\Program Files \Common Files\Apple\Mobile Device Support

  d. Paste the file 'libxml2.dll' at the location.

  e. restart your computer.

  I hope this helps.

• I use only 20 MB when you connect to the 802. 11A

  Hello

  I test aironet 1130ag with the wlc 2106 in my test environment

  When I connect to the 802. 11 a or g, I can get max speed 20 MB and not 54 MB

  What is worng and what should I check?

  Here is the basic configuration of the 802. 11A

  network 802. 11A... Activated
  11nSupport... Activated
  802. 11A of low band... Activated
  802. 11A mi band... Activated
  802 11A high band... Activated
  802. 11A operational rates
  802. 11 a 6 M rate... Mandatory
  802. 11-9 M rate... Support
  802. 11 a 12 M rate... Mandatory
  802. 11-18 M rate... Support
  802. 11-24 M rate... Mandatory
  802. 11A rate of 36 M... Support
  802. 11A rate 48 M... Support
  802. 11-54 M rate... Mandatory

  Beacon interval... 100
  CF Pollable mandatory... People with disabilities
  CF poll request mandatory... People with disabilities
  CFP Period....................................... 4
  Maximum duration of CFP... 60
  Default channel... 36
  Default Tx power level... 1
  DTPC status... Activated
  Fragmentation threshold... 2346
  Long retry limit... 4
  Lifetime maximum Rx... 512
  Service life of Max Tx MSDU... 512
  Medium limit of occupation... 100
  Pico-cell status... People with disabilities
  State of the Pico - cell - V2... People with disabilities
  RTS threshold... 2347
  Short retry limit... 7
  Threshold of TI-50
  State of the metric traffic flow... People with disabilities
  State of the accelerated application of BW... People with disabilities
  Profile EDCA type... by default-wmm

  Thank you

  When you say that you get only 20 MB do you want to say is that your data rate or throughput of your true?  If this is the true throughput which is right.  Remember that 802.11 is a technology of half duplex.  Half duplex and the management fee a client that connects to 54 Mbps can have a flow in fact up to 22Mbps

• Pavilion dv6700: white screen permanently after connecting to the projector (stuck in "projector only" mode)

  Hello community,

  Here is what happened:

  I have connected my laptop to a TV via HDMI and set the display option to show the "projector only" in the Panel.

  The fn functions do not work and have never been, probably because I, at some point, off the never installed or quick launch buttons driver after the transition from Vista to Win7.

  With the TV still plugged, I closed the laptop.

  Now, when my device is restarted, the screen remains black.

  Connect to the same or other TV sets via HDMI won't show 'no signal' on the TV.

  Connection to an external display or projector via VGA will show either no signal.

  So I presume this must be the source parameter, which would need to be changed back, but I have no idea how to do that blindly. Anyone got any ideas how I could solve this problem?

  I thank very you much in advance!

  Fixed drawing of one of the two RAM Modules. Just like that.

  Hope this can help others to solve the problem.

  What has not helped:

  • Permutation of these two RAM modules and then start.
  • Reset the BIOS by pressing the keys Windows + B while pressing the power button.
  • From the BIOS menu by (several times) by pressing f8 or f10
  • Pressing on the power while pressing fn + f4 button
  • Let start normally and then by pressing Windows key + P
  • Choose different start-up options blindly with the arrow keys and enter

• Qosmio G30 white screen when you start Windows XP

  Hi everyone - first time poster here!

  Today I turned on my Qosmio Toshiba G30 as I normally do, except that this time, the screen remained blank. Normally, the start of Qosmio screen appears with the music of Qosmio, but only Qosmio music out... no image on the screen! The computer continues to boot properly, but nothing has been posted.

  I panicked and I thought I'd need to buy a new computer...

  While I was on the phone with a friend to a support, I pressed the "TV Out" button (found in the upper right corner). That's it - the screen turned on, but all my icons have been reorganized.

  I tried to reinstall the display driver, but this is still the case every time that I reboot. The problem occurs not when putting the computer to sleep and look upwards again.

  Any help would be much appreciated!

  Thank you...

  Hello

  Check if the video output has not been set for external monitor or TV.
  You can change this by using the FN + F5 key combination.

  I also recommend to connect an external monitor to the laptop.
  Maybe you have defined somehow (accidentally) the external display as the primary display?  :|

  However, you are using Win XP as I m wrong not the laptop has been pre-installed with Vista. (is it true?)
  Maybe you should take a recovery disk Toshiba and must be reinstalled the self-image of Toshiba.

• .exe white screen after you have used the application on a programme of work Builder.

  Hello

  I am new to Labview development and I have a problem.

  I changed an application to fit my needs and when I run it there is no problem (Labview 7 Express) in debugging.

  After using the application builder to build my new soft, I have a white screen at launch.

  I tried before using the application generator and succeed with this same software (when my changes were in progress), and it worked.

  Do anyone have an idea? You need more info?

  Thank you.

  
  

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• How to remove white screen when you navigate from one page to another in Webworks BB?

  Hi all

  I have developed a web application for Blackberry using Blackberry webworks SDK... I created the package using emulator Ripple... In that when you navigate from one page to another page... coming white screen... How to remove this white screen... and instead of the definition of the loading screen in web application... Please me... Thank you very much in advance...

  With respect,

  Marimuthu_P

  normally it is not a white screen to navigate. You can view data-bb-effect as "bland" for the transition to the screen:

  https://github.com/BlackBerry/bbUI.js/wiki/screens

  second thing, is to use the activity indicator for loading (pending content):

  https://github.com/BlackBerry/bbUI.js/wiki/activity-indicator

• When you connect in the apple store, I get an unknown error, please help?

  Hello

  I had an apple for a long time but ID that you have not used for some time, well now I'm opening a session @ my work on my old apple ID in the apple store, I need to download anything to unzip the .rar files and I need to download it from the apple store for security reasons... so I have to log my account but I get an "unknown error". , no idea of what happens, maybe someone knows what I need to do?

  FYI, I've never connected to a mac with this apple ID, just the iphone, don't know if that counts in all but yes... Thank you!

  MAG ook in I eigen taal.

  A little more information please:

  What device (mac, phone, plate or what)

  what OS

  you are in the same country when the Apple ID was made?

  Note: for mac and the best is "The Unarchiver" in the Appstore, free.

  Lex

• When you connect to the internet error code 678 appears. What can I do to fix this?

  I get the error code 678 when trying to connect to the internet.

  With the help of a new modem D-Link DSL provided for me by my new extreme DSL service provider.

  Have Windows XP Professional installed on my machine.

  I downloaded the updated drivers for my network n-force Nvidia card.

  When I try to connect to the internet, I receive error 678 and cannot connect code.

  A run scans regularly for any virus or malware, with none detected using Norton 360.
  In addition to performing other troubleshooting code error 678.
  How can I fix this error 678?
    
  Hello
  You can check this link:
  You may receive error 678 or error 769 when you try to connect to the Internet or when you try to browse the Internet after you install Windows XP Service Pack 2
  http://support.Microsoft.com/kb/892889