Who and what motivates a RAID? Harm may be :)

Similar Questions

• Who and what is Uniblue registry and how do I get rid of him?

  YES, NOW, HOW CAN YOU GET RID OF THIS UNIBLUE REGISTRY. IT DOES NOT WORK SO I WOULD LIKE TO REMOVE MY COMPUTER IT A WANT

  FOR ME, THANKS AGAIN.

  YES, NOW, HOW CAN YOU GET RID OF THIS UNIBLUE REGISTRY. IT DOES NOT WORK SO I WOULD LIKE TO REMOVE MY COMPUTER IT A WANT

  FOR ME, THANKS AGAIN.

  Ouch! Please do not yell at us. We can hear you if you type normally, in different cases.

  Instructions for getting rid of it are here: http://www.ehow.com/how_5750090_uninstall-uniblue-registry-booster.html

  Also, note the following:

  Registry cleaning programs are * all * snake oil. The registry cleaning is not necessary and dangerous. Let alone register and do not use any registry cleaner. Despite what many people think, and what software record cleaning providers are trying to you convince to have used the registry entries is not really make you hurt.

  The risk of a serious problem caused by a registry cleaner by mistake delete an entry you need is much greater than any potential benefit it may have.

  Read http://www.edbott.com/weblog/archives/000643.html

  and http://aumha.net/viewtopic.php?t=28099

  and also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  Let me stress that neither me nor anyone else who warns against the use of registry cleaners has never said that they always cause problems. If they have always caused problems, they would disappear from the market almost immediately. Many people have used a registry cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it the essential * risk * to have a problem. And since there is no advantage to using a registry cleaner, running the risk is a very bad deal.

• Where to check who has changed the password of Admin of HSS and what the new password

  Hello world

  I use Hyperion 11.1.2.1.

  Can you please tell what newspapers reveal that changed the password of Admin of HSS and what is the new password.

  Even though I know how to reset the password of admin HSS but for security reasons I want to know which user changed the password of HSS.

  -Sun

  If it was the default password admin account then it's probably the admin account that has changed, you can run reports to audit in Shared Services, but to be honest, they are pretty useless, in the HSS database there is a table named CSS_USERS and a column called updatedby which will show the user who has made changes to the account updatedtimestamp last and column to indicate when

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• on the plateau and in the following RAID all-in-one?

  I was very pleased with the recommendations for a simple storage solution, good market/mid-range, I use both on the Board and in my editing room.  I read all of your tips, but I'm not always fully in the discussions.

  I capture and edit about 8 TB of 4 k R3D footage.   I would like to get to 10 or 12 TB of storage, so we may never fill up to more than 90%, including audio.  I'd be interested to hear the RAID 3, 5, or 6 solutions - anything from a box with cable unique e-Sata for installation of a controller.

  It would be great if it was relatively easy to set up, transport and rebuild if a drive has failed.  Ideally, I want her to be on the set with a portable non-edition.  We would take the cardboard RED of the camera and then transfer files from the RED card through the laptop on the RAID via maybe e-Sata, USB or firewire if the laptop has e-Sata.  Then, I would like to modify several months using the same RAID with my workstation.

  Above all, it will be simple straight cuts in first with 1 or 3 layers of effects, but at the end we probably want to use AfterEffects for VFX and color correction is within Adobe, or most likely through export of DPX files.

  My workstation is running CS5 on Windows 7 Professional 64 - bit with a card mother X58A-UD3R, i7 930, 12 GB of RAM and a GTX 470.

  Thank you!

  You will get only the 230 MB/s, if you get one of the higher end E-Sata cards that are normally $ 250 to $ 350 depending on the manufacturer. BTW that still will not work with your laptop. You will need a controller to E-Sata express card with multiplexing support to use this E-sata Bay with her likely anyway. As I said more to edge E-sata ports do not support multiplexing which is necessary to connect a multi-baies like that via 1 E-sata port.

  I did see an option to express for a before SAS controller card, so I would say no to your SAS issue laptop.

  A: most 7200 RPM HARD disks are now averaging 105 to 114 MB/s

  B: as I said 110 MB/s unless you buy the expensive E-Sata controller. Then you might get 230 MB/s

  C: it totally depends on your editing style and your workflow in AE edition. 1 to 3 layers will be fine with a 2 disk 0 raid if that's all you were going to do. The work of EI changes who and how much is dependent on the Publisher. BTW, what means that the E-Sata option with cheaper controller won't be enough. The higher end E-Sata controller will handle ok until the volume becomes over 65% of its capacity. If you want smooth reading then pass the SAS road. The other options will barely get done in many situations where, as the SAS will handle most if not all with this material.

  D: no, any sata drive will work. Readers of 10K just read and write faster.

  F: 6 Gbps rarely makes a difference on the mechanical drives right now. However, it offers a higher rate on the controllers because of the PCI-E Gen2 that support controllers and plu channel flow. So yes it is important on the controller, but not readers. SSDS change this dependant on the question of whether or not the variable speed drive is optimized for the 6Gbs. Currently SAS or SATA 6Gbs isn't. I don't think that it is still an E-Sata specification.

  Well, it's free, so that you could try as well. I expect not much based on the specifications of the card I can pull up. It does not support same raid 6, which is unusual most accept cards really cheap. This means no doubt also the raid configuration utility is not the best but it never hurts to try to see if you want to that unit. You can always get another raid card later if you don't like the management or performance. Do not forget that the raid controller decides how parity is good and reliable verification is. Be sure to keep a backup of the raws if data loss would cost any significant financial loss.

  Eric

  ADK

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• When and what can expect to happen to my computer after the end of support for windows XP?

  What is Pageheap?

  The answer to your direct question, when you think that say you, is a Google search away.

  -It is not supported to Microsoft for an operating system you probably have to worry.

  It is your own ability to stay static, I want a computer faster, better equipment, a new printer, scanner, camera, etc.

  The manufacturer of the software or hardware that you use every day will probably abandon Windows XP well before the April 2014 date when Microsoft stops by releasing the same critical patches for Windows XP.

  Their new printers will have only Windows Vista drivers, maybe just Windows 7.

  Their new scanners, cameras, etc. will be the same.

  I don't see the major software companies (AutoDesk, Apple, Adobe, etc.) continues to produce products that would work on Windows XP, Windows Vista and Windows 7 and what comes next in 2014.

  Everyone always loves to find a single entity to blame for their reluctance to change with technology - but usually it's just the changing world overall - not a single instance of it.

  Having said that - there are many people who still use Windows 98 twelve down on the line.

  They can't see certain things on certain web pages, cannot use certain devices, they might be able to pick up at their local drug/warehouse, even store and using the latest versions of major software packages are probably a lost - cause but they do very well in their microcosm.

  So - it mainly depends on you and your ability to do not change.

  In light of your previous question, this web page may be one that is useful to you:

  http://en.Wikipedia.org/wiki/windows_xp>

  If you look under the section titled 'Life support', he answers your question in this conversation.

  More than one type of"from the horses mouth"?

  Google search!

  http://www.Google.com/

  (How to: http://www.google.com/intl/en/help/basics.html )

  Example (using your detachment/words) - a research:

  Microsoft lifecycle

  ... brings up:

  http://www.Google.com/search?q=Microsoft+Lifecycle>

  Who has several good links listed at the beginning.

  Such as:

  http://support.Microsoft.com/GP/lifepolicy>

  Explaining what you see...

  And:

  http://support.Microsoft.com/GP/lifeselectindex>

  Where you can see the dates/support options for the products by name...

  Windows XP Professional:

  http://support.Microsoft.com/lifecycle/?P1=3223>

  Windows XP Home Edition:

  http://support.Microsoft.com/lifecycle/?P1=3221>

  Windows XP Media Center 2005 Edition:

  http://support.Microsoft.com/lifecycle/?P1=7024>

  Windows XP Tablet PC edition 2005:

  http://support.Microsoft.com/lifecycle/?P1=7801>

  Hope that helps. Come back and tell me if that's what need you!

  Courtesy of Stanley Zhang

  UTC/GMT is 19:55 on Monday, may 28, 2012

• Cleaning of PC - HELP Please! What do I NEED and what can GO.

  Hi all

  I'm just trying to clean my PC a bit, but have no idea of what I need to keep and what can go.
  First of all, I need WinRAR?
  And second, what are the other programs that tend to find a way to settle on your pc when your not very technical can think of deleting?
  I have download the occasional film or both, but not much. Very rarely that I download a game, and I try not to clutter my laptop so I listen to music on youtube rather than download that, too.
  I use bit torrent and extra torrent for download. The best suggestions?

  I use open office as my laptop didn't come with microsoft office, and yet I found a file called "Compatibiliy pack for the 2007 Office system" and wonder why I have because I do not use microsoft office, so can spend?

  So far, I've kept all the files with Microsoft as long as editor thinking I have to need.

  In addition, Cisco (?) is here... What is everything?

  I just ordered my internet explorer 8 after installing Microsoft Security Essentials (which has proposed moving to explore 8) and also followed the advice to uninstall my other programs scan virus (Mc McAfee & AVG)

  All the tips, everyone please?

  Thanks in advance,

  T. Sprate

  Hello ADVENT Roma.

  Thank you for the Microsoft Community approach. I understand you have questions of optimization of Windows 7. I will certainly help the question of fixing.

  I suggest you follow these links to find out how to clean your PC and make your PC run faster.

  Delete files using disk cleanup

  How to make a computer faster: 6 ways to speed up your PC

  WinRAR is a powerful compression tool with many integrated additional functions to help you organize your compressed archives. WinRAR puts you ahead of the crowd when it comes to compression. By consistently creating smaller archives, WinRAR is often faster than the competition. This will save you disc space, transmission costs AND valuable time to work as well.

  Refer to this link to Remarks of WinRAR provides you information about WinRAR.

  You can use any program to download movies and other programs. I suggest you to check the feedback from the user via internet and then use the recommended.

  About the Office, I suggest you to buy a full version and use it.

  See the link http://office.microsoft.com/en-in/ learn more about the office.

  If you use a Cisco router then you may have the Cisco software installed on your computer.

  It is recommended to use any security on your computer software, who meet in the best protection against the virus.

  By default, Windows 7 Internet Explorer 8, you have upgraded to Internet Explorer 8 to 9?

  I hope that gives you some answers to your question. If you have other questions about Windows post us in the Microsoft community. We are happy to help you.

• My phone has been hacked, and what should I do to ensure that my account is blocked?

  I received a message below on the home screen (before I unlock it) from my iPhone and iPad. It seemed strange to

  me because the battery upward at the top right is in color and it's prompting me to e-mail to a gmail account. When I received this message, it triggered an alert «I lost my iPhone/iPad»  I tried to access my icloud and he stated that it was inaccessible. I turned off the camera and turned it back. Then I changed the password on my icloud account and have not had a problem so far.  My phone has been hacked, and what should I do to ensure that my account is blocked?

  < image edited by host to remove personal information >

  Your iCloud account is compromised and the criminal who did it trying to extort the money from you.

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

• How can I know if an external drive has been used for Time Machine and what computer it came with too?

  How can I know if an external drive has been used for Time Machine and what computer it came with too?

  I have several laptops and iMacs. I spent the relocation of the year and only used the MacBook Pro.

  Now I'm trying to figure out which drive goes with which computer

  I connected just a disk seagate 1.5 t and the first thing he did was to ask if I wanted to use it as a Time Machine drive.

  (1) if it is the TM disk accompanying this computer don't would not it have just started upward automatically?

  (2) what happens if I would have said yes?

  (3) I don't even know if it's been activated for TM. Is there a way to tell? It may hold just for iMovie files and other programs associated with a computer from my past.

  All readers of backup Time Machine contains a folder named: Backups.backupdb. If you open this folder, you'll find another folder with the name of the computer that has been saved. If several computers have been saved on the same disk, you will have several folders.

• performance issues. I checked something who asked what I wanted at the start. So I can't access anything whatsoever. Any suggestions? THX.

  I went to system security - find and resolve a problem-check performance problems.  I checked something who asked what I wanted at the start.  So I can't access anything whatsoever.  Any suggestions?  THX.

  Hello

  • You receive an error message?
  • What exactly are you can't access?
  • What version of Windows are you using?
   
  You can refer to the following steps:
  Step has.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows 7.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  Step B.
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

• What valid average identity? and what do I do to fix this

  I was on the internet using a wireless connection, then im not on internet and its tells me his tent ' Validating identity ' I don't know what that means or what it should validate and who or whats identity? so I have no idea on how to solve this problem what exactly does want I'm running an XP media center edition Version 2002 Service pack 3

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps mentioned below and see if the problem persists.

  a: double-click the icon 'validating identity' incriminated in your system tray.

  b: 'wireless network connection status' window in the following click Properties

  c: in the resulting "wireless connection properties" window to click 'wireless networks tab' in this window, and then click Properties for your favorite network.

  d: In the next window, click on the "authentication" tab, make sure that 'enable IEEE 802. 1 x. "/c1 > checkbox is unchecked, the rest of this window must be dimmed." If your network is encrypted, go to step f otherwise click ok and try to connect to your network again.

  e: If you receive a "limited or no connectivity" error for your network connection then your network is most likely encrypted and you need to repeat the steps a to c and go to step f.

  f: In this window check that you are in the tab "Association." You will need to enter your encryption here information to connect to your network. Select your type of encryption of the "network authentication" and "encryption" drop downs. Clear the check box "The key is provided automatically" and enter and confirm the network key. Click ok to save the changes and try to connect again

  Hope this information helps.

• Why fiber optic use 4 types of connectors? And what is single mode or multimode optical cable thinner?

  Why fiber optic use 4 types of connectors? And what is single mode or multimode optical cable thinner?

  Why fiber optic use 4 types of connectors? And what is single mode or multimode optical cable thinner?

  Hello

  To bookmark this site.  He may have more information for you. Wikipedia

  Joining lengths of optical fiber is more complex than to join the electric wire or cable. The ends of the fibers must be carefully cleavedand then spliced, either mechanically or by merging with heat. Fiber optic connectors for removable connections are also available.

  Scroll to the termination and splicing

• What is the important of the framework and what is its role?

  What is the important of the framework and what is its role?

  I guess you mean, NET Framework and its different versions.  It is a programming platform, some of your applications need this to work.  Instead of having to write completely every thing software developers scratch use so-called "frameworks" to ensure that their applications do certain things, for example, if you want to tell your program to save a file, just insert a little short of code that calls the framework to do real work, in this way, you don't have to write all the code to save the file and orders the programming for this platform.  Not only this saved a lot of work, he adds also in general more stability to the software that the programmer doesn't have to test and debug these programming functions that have been developed and tested by Microsoft, otherwise, it would be some sort similar to reinvent the wheel for each piece of software.  If you know a little more about programming, or on older versions of Windows 9 x, .NET Framework is like Visual Basic and the runtime libraries, it is a more recent incarnation of software platform.  It is best to not uninstall and play with these different versions, if you are part of your software may stop working.

  John

• IM using Windows XP Profesional, can I upgrade to Windows 7 and what would be the cost?

  upgrade windows xp to windows 7

  IM using windows xp profesional can I upgrade to windows 7 and what would be the cost? what I have to put all my files on an external drive then uninstall windows xp then put in windows 7 then put back my files? is that how its done? Thank you.

  First the cost, you must know if your hardware can support Windows 7

  In General win 7 should a minimum og 1 gig of ram (for 32 bit) or 2 for 64-bit, and it needs a video card 256 MB or greater.

  If your less and can not be updated it may be best to start thinking about a new computer.

  If the above is ok there are various offers for win 8, but make sure you buy form a reliable site of Ms.  There are a lot of current scams.

  Good luck

• What are the components of Windows XP and what is their purpose?

  What are the components of windows and what are their purpose?

  Here is a list of Windows components:

  http://en.Wikipedia.org/wiki/Windows_components

  After Windows XP is installed on your computer, you can use the Add / Remove programs in Control Panel to add a Windows component that was not included in the original installation, or to remove an existing Windows you need is no longer.

  Some Windows components may require a genuine XP installation to install/reinstall CD.

  If you are having problems with a component of Windows, tell us about your operating system, Service Pack and describe in detail the nature of the sentence.