on the plateau and in the following RAID all-in-one?

Similar Questions

• Cursor autour breaks and clicks in the Middle words or a page, when you type, selects areas of the document when writing and by typing the following key, all this goes away.

  I have Microsoft Windows Vista Home premium, Version 6.0 (Build 6002: Service Pack 2), was Norton Internet Security. Cursor autour breaks and clicks in the Middle words or a page, when you type, selects areas of the document when writing and by typing the following key, all this goes away. Perhaps because of my attempts to resolve this issue, some of my PC system has had problems, it became unstable, I've had several accidents that I got Norton 360, but it don't did me not the solution and stops working, I re installed Norton Internet Security. Please give some answers and advice on how to solve this problem, thank you.

  Hello

  You use a desktop or laptop computer?

  Is the mouse a mouse wired or wireless?

  What is the brand and model of the computer and the mouse?

  If you are using a laptop, I suggest to change the sensitivity of the mouse pad.

  If this is a wireless mouse it might be interference from another close to the mouse. Make sure that speech recognition is not enabled.

• I am looking for the CS5 download, my laptop when out and I got a new all-in-one computer without a disc drive.

  , My laptop when out and I got a new all-in - one computer without a disc drive to install my version of photoshop I know he's older, but I don't use it much on this computer so I don't want to have to pay for the upgrade

  Thank you

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

• How can I uninstall the sidebar of all-in-one and completely disable "LyricSing"?

  The function of "all-in-one sidebar" offers redundant and confusing capacity that consumes valuable real estate display on my old (and small) monitor. The result is that it makes several important sites essentially unusable. Please help me get rid of it on Firefox 31,0 or allow the return to an older version of Firefox that does not include it.

  Similarly, "LyricSing" uses real estate display and also acts as a great popup generator. The path to "disable" and the "current status" switch does not work on my XP-based system.

  I strongly dislike (I'm being nice) IE and Chrome! Help, please!

  You can uninstall the extensions that are more, you need or want to use.

  • https://support.Mozilla.org/KB/uninstalling+Add-ons
  • https://support.Mozilla.org/KB/uninstalling-toolbars
  • You can enable or disable the power bookmarks bar by ' view > sidebar > bookmarks ' or 'Ctrl + B' (command + B on Mac)
  • You can enable or disable the sidebar story power by "view > sidebar > History" or "Ctrl + H" (command-H on Mac)

  The current releases of Firefox have a button ' show lateral bars > "in the palette to customize this feature is also in the history of bookmarks and buttons drop-down list (the latter in the list '3-bar' from the Firefox menu button).

  • Firefox '3-bar' menu button > customize
  • View > toolbars > customize

• How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1-1007 D desktop PC

  How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1 - 1007 D desktop PC? THX.

  There were buttons No. brightness and contrast on the front of the monitor-no onscreen menu.

  On your desktop,.
  Right-click to select graphic properties->

  in display settings, click Advanced settings
  Here you go, you can do almost anything with the brightness

  Hope it helps

• Re - install the software for the printer C6280 all in one... get a "file not found" error message

  you need to reinstall the software for the printer c6280 all-in-one. Downloaded the last installation on HP web site package. During the installation process I get an error message... Unable to find user/appdata/local/temp/7z256315/setup/...setup/blocksysuser...

  the 7z256315 folder does not exist on the hard disk.

  I also have a message that it cannot find PS_A10_02_software.msi.

  Windows 7, C6280 printer all-in-one. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via the wireless to the router.

  I hope you can help

  Thank you

  Charlie

  Hi cberistain,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77039-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 3645097 & sw_lang=.

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print and scan?

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• Need direction for the upgrade RAM and graphics card in my all-in-one Center B320 Office idea.

  Hello

  I want to level of Ram and graphics card I have my all in one ideacenter B320 Office.

  current specification of my office:

  CPU - 2nd gen cor i3 (3.10 ghz)

  RAM - 3 GB

  Graphics - 1 GB (AMD)

  can I put at 1.5 GB or 6 GB and 2 GB graphics card ram level.

  orientation need help pls...

  Thanks to adwance...

  Hi Mahendranaik63

  Welcome to the Community Forums of Lenovo!

  I guess these B320 data can help you with updates.

  Data sheet B320of Lenovo. (The information you are looking for 'KEY FEATURES' statement).

  Also check this personal reference guide under Lenovo B320 page.

  I hope this helps.
  See you soon!

• CHANGE the COLOR to BLACK and WHITE HP 1515 PRINTER ALL-IN-ONE

  I WANT TO CHANGE COLOR IN BLACK & WHITE IN MY HP 1515 PRINTING, PRINTER ALL IN ONE

  Hi Niby,

  I couldn't find the manual for the 1515, but I found one for the 1510 and the process should be exactly the same.

  Please see the manual for this product:

  http://h10032.www1.HP.com/CTG/manual/c03832527.PDF

  Go to page 17 and see «Settings printer advice»  If you read this article, it will tell you where to go in the printer driver to select "Print in grayscale" or "black ink only.

  I hope that's what you're looking for

• Recovery and system recovery disks don't work is not on the MS213 Pavilion (All in One)

  Hello

  I ordered the HP recovery discs as F11 will not work. I got 4 disks with one separated from the others. He said "use this first! The other 3 were combined, and they are marked the system recovery and disc 1 of 3, 2, 3 and so on. I restart the computer with the disk that says use this first. The disc starts to load and says loading files of Windows, or somehting like that. Then he said: Windows startup. I don't get the Recovery Manager menu. After a few seconds it ejects the disc, and there are 3 pictures on the screen, at the top left is like a circle with a check mark in it. With an arrow, it points to an ejected drive of a computer image on the disc tray. And it points to a picture of a computer with 3 drives. It seems that he tells me to put in the next disc. I put in one that is graduated from 1 to 3, the light on the drive flashes, and then nothing happens, regardless how long wait. If, instead of starting with the disk that says this first use, I start with the one who said that 1 of 3, after loading Windows files, it says something like "this disc is not for this computer.

  System information:

  HP Pavilion MS213 all-in-one

  Windows 7 64 bit

  Configuration of stock

  Background:

  It is a friend's computer. She was making a mistake "code purple" with the resumption of F11. She had someone watching and I don't know what they were doing, but when I got it, I was getting an error at startup. somehting like cannot find the Boot...

  I found a commercial version of Win 7 64 bit standalone disc and installed on the machine. It runs great, but it had to be for troubleshooting only, until I have the recovery disks.

  So, I'm stuck and would appreciate any help. I thought initially upgraded to Windows 8, but I thought that the recovery disks will be cheaper, and also the friend doesn't have to go through the inclination of windows 8.

  I will be happy to provide more information if necessary.

  If you can read the license key Microsoft Windows 7 of 25 characters related to the machine, you can download a Windows 7 ISO file to burn to a DVD. Remember, it is the version that is listed on the Microsoft COA sticker.

• Unable to print the alignment page All - in-One D110 full

  I recently changed my printer cartridges and I cannot print a full alignment page.  I tried all the troubleshooting steps I can find and still no resolution.  Any help would be greatly appreciated.  Or if someone has a picture of an alignment page fullsized.  This could be useful.

  George

  Hello @george5005,

  Welcome to the HP Forums!

  I understand that you can not print a full alignment using the Photosmart D110A page. I will do my best to help you! Please follow this entire document of HP a "undetected alignment page" or "Cannot be alignment" Message displays on the all-in-one.

  Try cleaning the printhead a couple of times until you receive a satisfactory quality. Please post your results, I will be looking forward to hear from your part have a good night!

• While trying to install the Kodak printer all-in-one on my Vista computer, I get the error "2147287035" system

  Original title: 2147287035 system error

  Hello

  Tried to install Kodak all in the printer software, then I got the error database error 2203 2147287035 tracking system - windows/installer\a720de.msi.

  Can you please help

  Thank you

  Hello

  If I understand correctly you have a problem with installing the Kodak all in a printer on your Windows Vista computer drivers. I would like to know more information on the issue, so that we can help you better.

  1. What is the error message or an exact error code?

  2. What is the Kodak printer model number?

  Let us try the following methods and check if it works for you.

  Method 1:

  Try installing the driver in a clean boot state. Place the computer in a clean boot state will help you to install programs without any interference from third-party program/application.

  Step 1: How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 3 to reset the computer to start as usual.

  Step 2: Find and install printer drivers:

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Method 2:

  Try to install the printer driver in the Compatibility Center.

  Make older programs run in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Please respond with the State of the question, so that we could help you better.

• I can't use the scanner in the Oki C5510 all-in-one printer.

  Original title: Oki C5510 all-in - One Printer

  Hi I have a problem with OKi c5510mfp. Downloaded recommended for the device and the scanner driver is not being picked up, even if the printer works. OS is windows 7 64 bit. It worked on this laptop before, new hard drive was installed and cannot use the scanner since.

  Help please
  Adrian

  Hi Adrien,.

  1. were you able to install the drivers successfully?

  2. do you get any error code or error message?

  3. what security software is installed on your computer?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Disable the security software and check if the problem persists.

  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  Try scanning using fax for Windows and scan feature and check if it works.

  Scan a document or photo with Windows Fax and Scan:

  http://Windows.Microsoft.com/en-us/Windows7/scan-a-document-or-photo-with-Windows-fax-and-scan

  If the steps did not help, then it would be best to contact the printer manufacturer for assistance.

  Hope the information is useful.

• Reference the Dell Photo all-in-One Printer 964 Installation

  I have a Dell Dimension E310 and a Dell Photo all-in-One Printer 964.  I am running Windows XP.

  My printer was working fine, but the scan did not work right.

  I uninstalled Dell 964 printer to help to change / remove programs.

  I tried to reinstall Dell 964 Printer by using the Drivers and Utilities CD: printer all-in-one Photo Dell 964 CD came with my computer.  I had this CD for 6 years and have used it to reinstall the printer before.

  I put the CD in D drive.  Sometimes, it will open the installation box (sometimes it isn't) where I can choose to install to a personal computer or a computer on the network.  I click on personal computer and wait.  Nothing happens.  In the past this action begins the process of installing the printer.

  Sometimes, I put the CD in D drive and nothing happens.  In this case, I opened my computer then right click on the D drive (which shows the Dell CD).  I click Open.  Sometimes, the installation box opens.  Sometimes it is not.

  Sometimes, a box opens indicating that the computer has detected new hardware - Dell Photo all-in-One Printer 964.  Operating instructions say if ensure that the Dell installation CD is in drive D, and then click Next.  He moves to another window where it says that it is looking for the CD.  Just, it maintains the search but can't find it.

  My CD of Installation is worn?  Is that why the computer can't find it?  Or something else going on?  Download the software of the printer from the Dell website?  Can I get a new CD Drivers and Utilities: Dell CD 964 Photo all-in-one printer?

  I have a limited knowledge of the computer.

  I appreciate any help anyone could offer.

  Thank you.

  Hi ColemanCreative,

  Please follow the instructions mentioned in the link below to uninstall and reinstall the drivers for your Dell Printer 964. Make sure there is no document in the queue before you uninstall the drivers.

  How do I uninstall the existing printer drivers: http://dell.to/18M5Oki

  If the problem persists, follow the steps mentioned below:

  Click the link for the Dell 964 printer drivers. Select operating system (OS) Vista. Once the operating system is selected as Vista, you will see an added option to run a cleaning/Patch Wizard to remove the old Dell printer software. Run the hotfix and restart the system. Make sure that the USB cable is not connected to the computer when uninstalling the printer drivers.

  For installation of printer drivers Dell 964:http://dell.to/13u7fzp

  When the system has restarted, check printing software has been removed and then install the drivers for the same link mentioned above. This time, select the operating system such as Windows XP, which is the operating system on your computer before you download and install the drivers.

  Hope this solves the problem for you. Let us know if additional assistance is needed.

  Thank you and best regards,
  Babita S
  #iworkforDell

  For easy access to the drivers, manuals and updates, please visit our Support Site .

• Can not reinstall the software/driver for the Officejet 6500 all-in-one

  I tried to 'day' the pilot on my all-in-one e710n-z printer 6500, and now I have no printer to work at all.  Installation stops at about 80% complete giving the error: Network Installation fails.  I followed all the procedures including online uninstall them, winsock reset, reinstall, install HP utility failure, disabled anti-anti-virus/firewall... nothing works.   My printer is detected by the computer and he "wants" install, but nothing works!  Wi - fi is on, and the only thing that I miss is the driver.  What is the secret of installing the HP online support site?  With the help of Windows OS 8.1.  Thanks for any help!

  Thank you so much for offering to help... This has been a very frustrating experience where I felt like I more, more was wrong.   It turns out that I solved the problem myself with a lot of trial and error and perseverance.  The location of the printer and our computers would not have allowed practical USB or ethernet connection tests.

  The computer has been grateful to the printer, but few of the functions of the printer did not work.  I kept getting notices that I need to be connected to Internet... and yet I was.   Instead, I followed every remedies proposed, and finally met and installed the HP Print & Scan Dr.   The full program would not even install, but I did use uninstall and reinstall the feature on the Dr. P & S and I noticed several MB difference between program he installed and which had been installed until then.

  The error kept showing a network connection problem, but I had already restarted the router several times.  When I got to the printer, I had loaded it a stable and permanent address through the router, so every time I "uninstalled and reinstalled then" software, it always by default the preset number on the router... that has been a blessing!  Finally, I got on the Web site of the real, connected and re-configured router the network connection on the printer using the PIN # that was generated (the WPS buttons had failed earlier) However, it happened, the resumed printer connected and I was able to print a test page.  All is well again.