who is the manufacturer of the screen multitouch X201T layer?

Similar Questions

• iPhone 7 backlight of the screen does not

  I was playing around with my new 7 iPhone and after having tested the retina Flash (who makes the screen will Flash White gloss to simulate a flash for the front-facing camera), the screen is totally black. I think the problem is the backlight of the screen because the iphone still unresponsive to commands (with sounds and feedback from taptic) and I can even see whats happening on the screen using a super bright external light. Everyone knows a similar problem?

  I saw the backlight failure with other models. Usually a motherboard component failure.

  Try to do a reset, hold the home button and the power together for 30 seconds or until you see the Apple logo reappears. If this doesn't fix it, then try to restore it. If this doesn't fix it, then you will probably have a problem with the backlight on the motherboard circuit, in which case the phone replaced under warranty.

• I had the virus 'file system' I ran most of MS who removed it... then the screen turned gray and all the icons and files have disappeared... I can't use restore even in safe mode

  I had the virus 'file system' and ran the Microsoft Essentials who kidnapped... Then the screen turned grat and all my tyop desktop icons disappeared and my files... I tried to use the restore but it wouldn't return back or in SafeMode... also, I get a notice that the Task Manager is disabled? How can I turn back?

  Hi David McGeady.

  ·         You are able to open in safe mode Task Manager?

  Follow these methods.

  Method 1: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2: It seems that the virus is still there. Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  Method 3: Create a new user account.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

• on the left side of the screen, I get always the same who Web site that I can click here. How can I get rid of him?

  It opened when I clicked on it in my favorites, opened on the left side of the screen en there, I use firefox nomaly but I can get it from my screen. It's already there when I open Firefox.
  I install Firefox again but she is back.

  You open a bookmark in the sidebar which is maintained even after restarting Firefox. There is a small x mark on the top right of the site. Click on it to close it forever. See the image as an attachment.
  
  
  In the future, to prevent loading bookmarks in the sidebar:

  1. Press the Alt key.
  2. Click on the menu of bookmarks , then select show all bookmarks.
  3. Select the bookmark you want to edit.
  4. At the bottom of the window, click the arrow next to more.
  5. Disable the setting to load this bookmark in the sidebar .

• HP EliteBook 8440p: white horizontal lines on the screen who retreat down in the minute

  Hi again. I've already posted about this so there are pictures and a full description of my post a few days ago. In short, when the laptop was arrested or sleep for more than a few hours, it is white horizontal lines on the lower part of the screen that slowly fade completely down. The lines do not appear on an external monitor in dual mode.

  I removed the screen twice now and checked / reinstall connections to the screen and under the keyboard. The problem persists.  I flashed the BIOS a few days ago and the problem persists. The webcam, microphone and WWAN/WLAN are all in perfect condition and the computer works fine apart from this problem of screen work.

  Until I drop the most money on this used laptop that is my only question at this point sounds as strictly a matter of cable/display on the screen? If it's a motherboard problem I would see other problems? If it is the graphics card goes wrong I would see other problems? As I said, the computer works perfectly once it is running.

  Anyone has any useful ideas?

  Hello

  You can try to connect this unit to an external monitor to check if there is a problem with the motherboard or display

  If the external monitor works fine, then there is no problem with the motherboard, only the display panel needs replacement.

  If the problem persists in the external monitor, suggest you to update the graphics drivers and see if the problem resolves

  I hope this helps

  #HPExpertDay

  Best regards;
  Jyo
  I am an employee of HP
  Please click the White Star Kudos to say thank you for helping.
  Please check accept as Solution if my help has solved your problem.

• Drop calls and the screen changes while I talk to who puts me on mute

  While I'm talking on the phone and now to my ear, the screen will switch to the keyboard on the screen and I can hear the other person but they don't hear me. I can click back to the call in progress, while it works. In addition, the phone hangs up on several occasions. Sometimes the phone ends the call within 5 seconds of me being on the phone and sometimes up to 3 times in a row. I was wondering if there is anything I can do to fix this. Thanks for any idea!

  IMO there is no excuse for this type of problem in a phone.  It's really maddening when Verizon and Motorola to ignore it.  However, I suggest that you try the app Screen Suite.  I used to drop calls constantly.  This thing has fixed this particular problem.  I don't think this absolves Verizon and Motorola to provide their own dose, but it helps.  Try it and let us know how it goes for you.

• How to split the screen of my mac book

  How to split the screen of my Macbook?

  There may be a solution on how to split the screen into two (halves) for independent display

  through the use of third-party software options. I haven't tried everything, but have read of some who can work.

  Such a "solution party' appears in the Mac App Store; See the second link to the manufacturer.

  https://iTunes.Apple.com/us/app/split-screen/id453757310?MT=12

  • Split screen - Mac app for windows (approximately $7 USD) display management

  http://www.splitscreenapp.com/

  There may be others, beware of questionable sources, as they may contain others? content.

  This may work on a Mac, not a portable desktop computer:

  • Apple introduced mode split for the apps full screen on a Mac in OS X El Capitan - 9to5Mac.com:

  http://9to5Mac.com/2015/06/08/Mac-split-screen-multitasking/

  In any case...

  Good luck & happy computing!

  under the direction

• Games running in lower resolution on the desktop resolution does not fill the screen

  I have a laptop HP ENVY 17 TS with NVIDIA GT 740 M and Intel 4600HD graphics drivers and running Windows 7. Whenever I want to change the resolution in games at a lower resolution on the desktop resolution, the game shrinks to its view, leaving the couple of inches black bars on the edges. For example, if my the desktop resolution is 1920 x 1080 and I want to start a game in 1600 x 900, the game does not fill the screen, instead, it leaves an amount of empty space on the edges of the screen.
  
  In order to solve this problem, I tried the following steps:
  
  I first tried to locate the view tab in the NVIDIA Control Panel in order to define the scale/stretch in "Full screen", but my version of NVIDIA CP isn't the view tab (my NVIDIA drivers are the latest version).
  
  Then I discovered that I should do this in the Intel HD Graphics Control Panel. My Intel HD Graphics CP has an option named "Calibration" under display > display settings and it doesn't show the option to retain display scaling that is checked by default and does not change. Also, after searching the Internet I saw that some people suggested entering the 'advanced settings' and try to make changes. When I try to enter advanced settings, under view, it says 'this screen does not support advanced settings'.
  
  After trying without success, I tried the update driver Intel via their website, hoping that it can fix the problem. I ran the small Intel application on their Web site that identifies my chipset and offers me the latest driver for this chipset. Web site told me that the driver is installed on my computer is 10.18.10.3304, and there is an update for what is 15.33.18.64.3496 (or 10.18.10.3496). So I downloaded the file, but when I tried to run, it gave me this error message: "the drivre being installed is not validated for this computer. You can get the correct driver from the manufacturer of the computer. Setup will now exit. "that makes no sense.
  
  After trying the above steps, I'm not able to solve the problem, and I need help from someone who really knows how to solve this problem.
  
  Thank you.

  Solution (I hope)

  1. choose the properties of the graphic (logo Intel) option when you right click on the desktop

  2. go in view

  3. go through the resolutions on the 'Resolution' and change to this resolution (do not click Apply)

  4. for everyone to go to 'Scaling' at the bottom of the screen and change it to scale full screen (do not click Apply)

  5. Repeat until you get back to the higher resolution (that won't let you change the scale).

  6. quickly choose a few resolutions from the drop-down menu to make sure that they have changed their scale.

  I had a problem with some resoultions changing the way they were, but which should solve most of the problems.

• Several games limit left 2/3 of the screen and only game in black and white

  Original title - problem with games

  Five of the eight games on my machine here confined to the left 2/3 of the screen and play only in black and white. It's Chess Titan,

  Free Cell, hearts and Spider Solitaire, solitaire. Ink ball, Mahjong-Titals and Minesweeper work very well. I had the same problem with Netflix, but

  acting on the advice of the Csr Support, I have ununstalled and re-installed Silverlight (and had to use the Fix It program to do it). That solved the problem of Netflix

  but not the problem of games. YouTube has never been touched by this issue)

  Note: these problems two weeks ago.

  Microsoft says my video driver customer service must be updated and that I had to go so the manufacturer (Dell). I can't

  implement this driver in programs and features at all.  I don't know what made everything a video driver. It only concerns the functioning of

  (some) games?

  Any suggestions or info appreciated

  Ed Mac

  Thanks for your reply. I tried to uninstall the games, but the Turn Off function did not cooperate.

  I had the problem, however. An outfit with whom I unfortunately chose to do it remotely

  maintenance, but who are if anything more incompetent than the people of Dell installed on my machine one

  program called "Assistant pilot."  Now, it turns out I had two issues which has the same effect on Netflix and 5 of 8 games, i.e. the image limited to 2/3 of the screen and exploitation of black and white only. The Netflix problem solved when Microsoft Csr Serv me sent suggestions on what to do, which was to uninstall and reinstall Microsoft Silverlight and use the Fix It program if there were problems. Now the outfit I mentioned tried time and time again to uninstall Silverlight without success. It appears that they knew no more difficulty I did. Silverlight was the problem here, because they felt properly.

  The problem of games persisted. Microsoft Csr Serv now told me she looked like my update video driver required and suggested I have call the manufacturer, Dell. God forbid!    I know little about computers. they know less. Then I shortened myself of this pilot, a wizard who bethought

  appears on my menu. I ran the program and it came with 20 + drivers requiring an update. One was a NVIDIA driver and I was vaguely aware that they probably had something to do with it.

  Update Ran, problem solved! Note that people who have installed this program to me do not have

  Consider using it to try to solve what was obviously a video problem! Yikes!

  Microsoft stands out as the good guys here. I had spent hours on the phone with Netflix (very useful, but it wasn't their problem) and this other suit. Microsoft pointed me in the right direction without fees.

• replacing the screen for HP DV7 7080el

  Hi all, this is my first post. My laptop HP DV7 7080el fall and now the screen is broken. The pc works well if connected to an external monitor. I am looking for a replacement of the screen. Is there someone who could tell me where to buy it?

  Thanks for a response

  Hello

  HP parts listed in the manual for Billboard-
  17.3 inch, glare, FHD (1920 x 1080) display panel, 681991-001
  17.3 inch HD (1366 x 768), BrightView display panel, 681990-001

  Manual: http://h10032.www1.hp.com/ctg/Manual/c03221579.pdf (Page 4, 28)

  Data sheet: http://support.hp.com/us-en/document/c03219767

  Your laptop came with Billboard with a resolution of 1600 x 900 backlight LED HD + BrightView, 17.3 "but that the part is not listed in the manual.

  The best way to get the screen replacement is to remove the screen and search for the part number on his back. You'll have to do it anyway. Check the manual that I gave, to get the R & R procedure.

  This video shows a way out just the Panel:

  http://www.YouTube.com/watch?v=JXjIkD7IQOg

  Once you have pulled the screen you to search both google, you can get the HP part number and manufacturer part number.

  I am not able to find the part supplied with your laptop from HP Web part Surf site, you can also try:
  PartSurfer.HP.com

  After obtention getting the part number, look for the HP part store or through Online stores.

  Concerning

  Visruth

• my Windows xp pro computer was working fine, but after five days, when I stat from my computer I could show only the information of the bios on the screen and then the screen freezes

  my Windows xp pro computer worked fine but after five days, when I stat my computer I could show only the bios information on the screen then the screen freezes, then I started ahead of time the computer starts at mode, but once again he the disply frozen. I couldn't start my computer. I have a lot of data in my hard drive. What can I do to start computer or recover my data?

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors, then your RAM is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• No audio at the bottom of the screen icon.

  I have no sound, I can't find the sound icon who was always at the bottom of the screen. I think that the sound could have been accidentally turned off. How can I check that and turn it back on?

  To get the rear speaker icon, follow these steps:

  Open Windows Explorer then > tools > file display Options > make sure that show hidden files and folders is checked > apply > OK.

  Then navigate to the following folder, which should now appear:

  c:\Windows\System32\dllcache

  Locate the sndvol32.exe and copy it into c:\windows\system32, overwrite if asked.

  Restart and you should now have to least your mixer back (your icon can be placed in the taskbar).

  The sound works now? If this isn't the case, re - install your audio drivers a download from the website of the manufacturer of your computer/PC laptop, or one of the CD that came with your device.

  Re-post if this issue remains.

  See you soon,.

  Jerry

• I downloaded a game on the internet, and now my screen does not match my screen. I have two large black areas on each side of my screen. How to resize my screen to fit the screen of my computer? (and yes I tried the button expand) :))

  I have two large black areas on each side of my screen. How to resize my screen to fit the screen of my computer? (and yes I tried the button expand) :))

  Hello val2000, welcome.

  These games is managed inside of Internet Explorer? If this isn't the case, then I suggest contacting the manufacturer of your computer for the latest pgrahics drivers. If installation of those who does not resolve the problem, then try to change your resolution to one of the following values (depending on the size of your screen):

  1024 x 768
  1280 x 800 (wide, common form for laptops)
  1280 x 1024
  1680 x 1050 (widescreen)

  To change your resolution:

  1. click on START
  2. click on "Control Panel."
  3. double click on "display".
  4. click on the tab "settings".
  5. change the resolution on your cursor tab and then click on 'Apply' at the bottom right

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The screen visuals are too big

  After stopping for the night, a ' install updates and shut down ' was launched. The next day, newspaper on desktop, to all the screens of the site web, etc., Visual of the screen are too big. How can I get this back to fix the little plus size.

  Hello

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the performance and security of your system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can also go to the website of the manufacturer of the graphics card or your computer > Search a drivers and download article > search your computer or your graphics card model number > your operating system > drivers for it: is video / graphics / Chipset (according to the label) > download and install the drivers.

  See you soon.

• Vista Home Premium boots with black bands on the sides of the screen and features limited after d/l-ing Windows updates

  Hello

  My Dell Inspiron 530 has recently started having problems starting. When I turn it on regularly, Windows Vista Home Premium starts with black bands on each side of the screen and your desktop extended / enlarged which does not display the start menu or the taskbar. I can navigate in the Panel, but when I click on the resolution of the screen, nothing happens and I'm unable to change the screen resolution. When I use CTRL and the mouse scroll wheel, I can reduce the size of the desktop icon, but the taskbar, nor start menu appears on the screen. I noticed that I can't start programs when the computer is in this State as well.

  I think that this problem started after I downloaded a game from 3 updates of Windows, but I do not know what updates they were.

  I am able to start safe mode and the office fills the screen normally. I don't know what steps I can take mode without fail to solve the problem of normal startup, however.

  Please let me know I you a glimpse into this situation because it is extremely frustrating. Thank you very much for your help!

  Hello

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.