Why Angela check the pins of the GPIO event when she enrolled only for a single PIN in fact?
I noticed that Angela verifies the PIN actually reported the event to change, but in fact she registered only to be informed by a PIN. This looks so much like Angela is either not trusting his own registration code, or she's not confident Java ME libraries. It can really happen than the ME libraries send a listener an event for which he in fact was not recorded explicitly?
Markus KARG wrote:
I noticed that Angela verifies the PIN actually reported the event to change, but in fact she registered only to be informed by a PIN. This looks so much like Angela is either not trusting his own registration code, or she's not confident Java ME libraries. It can really happen than the ME libraries send a listener an event for which he in fact was not recorded explicitly?
Hi Markus -.
No, Java ME will not send an event to a PIN that is not registered. And true, in this simple example, the check is not necessary.
The check point was to illustrate the event sent to the valueChanged method contains a reference to the PIN that generated the event.
For example, you can create a single listener for several PIN codes class.
Tom
Tags: Java
Similar Questions
-
If my disk defragmentation has been stopped and the computer tells me to check the log events for more details how can I do my accessible Defragmenter again?
Hello1. have you made changes on the computer recently?
Method 1.
Type these commands in the start menu, run a dialog box:
Here's how:
a. Click Start.
b. in the run box, type the following commands one by one and press to enter.regsvr32 dfrgsnap.dll
regsvr32 dfrgui.dll
Method 2.
I. to resolve this problem, follow these steps:a. Click Start, run, type % Windir%\Inf, and then click OK.
b. right-click the dfrg.inf file and then click on install.ORII. Alternatively, you can reinstall Disk Defragmenter using the following command:a. Click Start, run and type that the following command and press ENTER.Rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\dfrg.infI hope this helps. -
How to make all the fields on one page read only (for the recipient) without having to make each field read-only?
Hello Jmbtexas4,
By default, you will need to individually click on the fields of the form and check the 'read only' and save it. From now on, it is not possible to select all together and make the changes.
-Usman
-
I need a file to an exact width and height and it must be in png format, because it allows to translucency. My graphics are only the top of the page and when I export only the graph is not exported the entire file. How can I get the entire file of export including blank parts?
in the export dialog box, you have chcked 'use of work plans? ''
-
How can I remove the reminder to check the new synchronization? I really hate for it
Each time I start Firefox, theres a bar on the bottom, asking me to check the new sync... I can close, but its annoying. How do I permanently delete this reminder damm forever?
You use Sync?
If you do not keep the changes after a reboot or have problems with preferences, see:
There is software like Advanced SystemCare thanks to its surf Protection feature that allows to protect the files in the folder of Firefox profile against the changes.
If you have this software, then check the settings or uninstall this software. -
My folio is Portrait and landscape and many of my pages have the MSO, and when I go back and forth between the layouts on my phone, the page returns to the State 1st in this MSO.
Another major problem is that it takes 3-5 seconds to go from Portrait to landscape and vice versa.
Folio is 25 version.
I created all the pages in portrait first and then created a different layout (landscape).
Any ideas?
Thank you
Make sure your portrait and landscape MSO have exactly the same name. InDesign changes the name of the ASM by adding a number when you make a copy of the WHO for a different layout. It will not solve the problem of return to the first State.
Not sure on issues of speed, maybe tablet related?
Good luck.
JvR
-
Cannot move the browser window when select Web site for 10 seconds
After the last update, when I run firefox and I click on a favorite or enter an address and website load... can not grab the top bar and move the window to another monitor. 10 seconds later... it works.
Hello
Please check if this happens in Safe Mode.
Troubleshooting Extensions and themes
Safe mode disables the installed Extensionsand themes (appearance) in (Alt + T) Tools > Add-ons. Hardware acceleration is also temporarily disabled - manual setting is Tools > Options > Advanced > general > use hardware acceleration when available. Options > Advanced. All these parameters/additional custom modules can also be individually or collectively disabled/enabled/changed to normal mode of Firefox to check if an extension, theme or hardware acceleration is causing issues.
-
Problem with the archive log when you use RMAN for backup and restore (11g 2)
Hello world
Please help me solve this problem.
I'm just beginner in Oracle Database (11 g 2). Today, I had a problem, I tried to back up and restore my db by RMAN. I delete all the files in /u01/app/oracle/oradata/orcl / * , then I restore them easily, but the point is I have a table, I can restore Hungarian, but cannot restore anything ranks in it (something wrong with step restore database). I'll tell the detail below.
-First, I create a 'Day' with command table create table hr.day (varchar (20)) day. Then I backup complete by this:run{
allocate channel bkp device type DISK FORMAT '/u01/backup/DB_FULL_%d_%T_s%s_p%p' ;
backup as compressed backupset incremental level 0 tag 'DB_FULL' database include current controlfile;
backup as compressed backupset tag 'ARCL_BKP_FULL' archivelog all delete input;
crosscheck archivelog all;
crosscheck backup;
delete noprompt obsolete;
release channel bkp;
}
D ' other hand, I have insert 'Monday' to table. then do an incremental backup by this:run{
allocate channel bkp device type DISK FORMAT '/u01/backup/DB_INC_%d_%T_s%s_p%p' ;
backup as compressed backupset incremental level 1 tag 'DB_INC' database include current controlfile;
backup as compressed backupset tag 'ARCL_BKP_INC' archivelog all delete input;
crosscheck archivelog all;
crosscheck backup;
delete noprompt obsolete;
release channel bkp;
}Repeat 7 times (Monday-> Saturday). And I got these files:
[oracle@rac ~]$ ls -l /u01/backup/
total 400280
-rw-r----- 1 oracle oinstall 10158080 Jan 20 07:23 c-1428943247-20160120-01
-rw-r----- 1 oracle oinstall 10158080 Jan 20 08:04 c-1428943247-20160120-02
-rw-r----- 1 oracle oinstall 10158080 Jan 20 08:05 c-1428943247-20160120-03
-rw-r----- 1 oracle oinstall 10158080 Jan 20 08:06 c-1428943247-20160120-04
-rw-r----- 1 oracle oinstall 10158080 Jan 20 08:08 c-1428943247-20160120-05
-rw-r----- 1 oracle oinstall 10158080 Jan 20 08:08 c-1428943247-20160120-06
-rw-r----- 1 oracle oinstall 10158080 Jan 20 08:09 c-1428943247-20160120-07
-rw-r----- 1 oracle oinstall 10158080 Jan 20 08:32 c-1428943247-20160120-08
-rw-r----- 1 oracle oinstall 296337408 Jan 20 07:23 DB_FULL_ORCL_20160120_s89_p1
-rw-r----- 1 oracle oinstall 1130496 Jan 20 07:23 DB_FULL_ORCL_20160120_s90_p1
-rw-r----- 1 oracle oinstall 2266624 Jan 20 07:23 DB_FULL_ORCL_20160120_s91_p1
-rw-r----- 1 oracle oinstall 4073984 Jan 20 07:23 DB_FULL_ORCL_20160120_s92_p1
-rw-r----- 1 oracle oinstall 11201536 Jan 20 07:23 DB_FULL_ORCL_20160120_s93_p1
-rw-r----- 1 oracle oinstall 1130496 Jan 20 08:05 DB_INC_ORCL_20160120_s100_p1
-rw-r----- 1 oracle oinstall 146944 Jan 20 08:05 DB_INC_ORCL_20160120_s101_p1
-rw-r----- 1 oracle oinstall 884736 Jan 20 08:06 DB_INC_ORCL_20160120_s103_p1
-rw-r----- 1 oracle oinstall 1130496 Jan 20 08:06 DB_INC_ORCL_20160120_s104_p1
-rw-r----- 1 oracle oinstall 82432 Jan 20 08:06 DB_INC_ORCL_20160120_s105_p1
-rw-r----- 1 oracle oinstall 294912 Jan 20 08:07 DB_INC_ORCL_20160120_s107_p1
-rw-r----- 1 oracle oinstall 1130496 Jan 20 08:07 DB_INC_ORCL_20160120_s108_p1
-rw-r----- 1 oracle oinstall 18944 Jan 20 08:08 DB_INC_ORCL_20160120_s109_p1
-rw-r----- 1 oracle oinstall 155648 Jan 20 08:08 DB_INC_ORCL_20160120_s111_p1
-rw-r----- 1 oracle oinstall 1130496 Jan 20 08:08 DB_INC_ORCL_20160120_s112_p1
-rw-r----- 1 oracle oinstall 131584 Jan 20 08:08 DB_INC_ORCL_20160120_s113_p1
-rw-r----- 1 oracle oinstall 647168 Jan 20 08:09 DB_INC_ORCL_20160120_s115_p1
-rw-r----- 1 oracle oinstall 1130496 Jan 20 08:09 DB_INC_ORCL_20160120_s116_p1
-rw-r----- 1 oracle oinstall 8704 Jan 20 08:09 DB_INC_ORCL_20160120_s117_p1
-rw-r----- 1 oracle oinstall 2203648 Jan 20 08:04 DB_INC_ORCL_20160120_s95_p1
-rw-r----- 1 oracle oinstall 1130496 Jan 20 08:04 DB_INC_ORCL_20160120_s96_p1
-rw-r----- 1 oracle oinstall 1899008 Jan 20 08:04 DB_INC_ORCL_20160120_s97_p1
-rw-r----- 1 oracle oinstall 327680 Jan 20 08:05 DB_INC_ORCL_20160120_s99_p1And
RMAN> list backup summary;
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
------- -- -- - ----------- --------------- ------- ------- ---------- ---
80 B 0 A DISK 20-JAN-16 1 1 YES DB_FULL
81 B 0 A DISK 20-JAN-16 1 1 YES DB_FULL
82 B A A DISK 20-JAN-16 1 1 YES ARCL_BKP_FULL
83 B A A DISK 20-JAN-16 1 1 YES ARCL_BKP_FULL
84 B A A DISK 20-JAN-16 1 1 YES ARCL_BKP_FULL
85 B F A DISK 20-JAN-16 1 1 NO TAG20160120T072332
86 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
87 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
88 B A A DISK 20-JAN-16 1 1 YES ARCL_BKP_INC
89 B F A DISK 20-JAN-16 1 1 NO TAG20160120T080440
90 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
91 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
92 B A A DISK 20-JAN-16 1 1 YES ARCL_BKP_INC
93 B F A DISK 20-JAN-16 1 1 NO TAG20160120T080545
94 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
95 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
96 B A A DISK 20-JAN-16 1 1 YES ARCL_BKP_INC
97 B F A DISK 20-JAN-16 1 1 NO TAG20160120T080657
98 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
99 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
100 B A A DISK 20-JAN-16 1 1 YES ARCL_BKP_INC
101 B F A DISK 20-JAN-16 1 1 NO TAG20160120T080801
102 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
103 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
104 B A A DISK 20-JAN-16 1 1 YES ARCL_BKP_INC
105 B F A DISK 20-JAN-16 1 1 NO TAG20160120T080844
106 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
107 B 1 A DISK 20-JAN-16 1 1 YES DB_INC
108 B A A DISK 20-JAN-16 1 1 YES ARCL_BKP_INCMy configuration of rman:
RMAN> show all;
RMAN configuration parameters for database with db_unique_name ORCL are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u01/backup/%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 2 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/u01/backup/backup_df%t_s%s_s%p';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE COMPRESSION ALGORITHM 'BASIC' AS OF RELEASE 'DEFAULT' OPTIMIZE FOR LOAD TRUE ; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/app/oracle/product/11.2.0/dbhome/dbs/snapcf_orcl.f'; # default- Thirdly, i removed all file in /u01/app/oracle/oradata/orcl/*. then restore control file from the newest backup control file (saturday backup) + restore database. Seem nothing's wrong here.
RMAN> restore controlfile from '/u01/backup/c-1428943247-20160120-08';
Starting restore at 20-JAN-16
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=18 device type=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: SID=20 device type=DISK
channel ORA_DISK_2: skipped, AUTOBACKUP already found
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:09
output file name=/u01/app/oracle/oradata/orcl/control01.ctl
output file name=/u01/app/oracle/flash_recovery_area/orcl/control02.ctl
Finished restore at 20-JAN-16
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
released channel: ORA_DISK_2
RMAN> restore database;
Starting restore at 20-JAN-16
Starting implicit crosscheck backup at 20-JAN-16
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=20 device type=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: SID=18 device type=DISK
Crosschecked 29 objects
Finished implicit crosscheck backup at 20-JAN-16
Starting implicit crosscheck copy at 20-JAN-16
using channel ORA_DISK_1
using channel ORA_DISK_2
Finished implicit crosscheck copy at 20-JAN-16
searching for all files in the recovery area
cataloging files...
no files cataloged
using channel ORA_DISK_1
using channel ORA_DISK_2
channel ORA_DISK_1: starting datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_DISK_1: restoring datafile 00001 to /u01/app/oracle/oradata/orcl/system01.dbf
channel ORA_DISK_1: restoring datafile 00002 to /u01/app/oracle/oradata/orcl/sysaux01.dbf
channel ORA_DISK_1: restoring datafile 00003 to /u01/app/oracle/oradata/orcl/undotbs01.dbf
channel ORA_DISK_1: restoring datafile 00004 to /u01/app/oracle/oradata/orcl/users01.dbf
channel ORA_DISK_1: restoring datafile 00005 to /u01/app/oracle/oradata/orcl/example01.dbf
channel ORA_DISK_1: reading from backup piece /u01/backup/DB_FULL_ORCL_20160120_s89_p1
channel ORA_DISK_1: piece handle=/u01/backup/DB_FULL_ORCL_20160120_s89_p1 tag=DB_FULL
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:01:15
Finished restore at 20-JAN-16-Fourth, the problem here, I got the database;
.. .every oky until this line...starting media recovery
channel ORA_DISK_1: starting archived log restore to default destination
channel ORA_DISK_1: restoring archived log
archived log thread=1 sequence=15
channel ORA_DISK_1: reading from backup piece /u01/backup/DB_INC_ORCL_20160120_s117_p1
channel ORA_DISK_1: piece handle=/u01/backup/DB_INC_ORCL_20160120_s117_p1 tag=ARCL_BKP_INC
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:00:01
archived log file name=/u01/app/oracle/flash_recovery_area/ORCL/archivelog/2016_01_20/o1_mf_1_15_c9xsyx9k_.arc thread=1 sequence=15
unable to find archived log
archived log thread=1 sequence=1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 01/20/2016 08:50:22RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 1 and starting SCN of 1205841
The error said that it is impossible to find the archived log thread = 1 sequence = 1. Then I check it with this command always there (oh, I'm wrong?)RMAN> list backup of archivelog all;
List of Backup Sets
===================
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
82 2.16M DISK 00:00:00 20-JAN-16
BP Key: 82 Status: AVAILABLE Compressed: YES Tag: ARCL_BKP_FULL
Piece Name: /u01/backup/DB_FULL_ORCL_20160120_s91_p1
List of Archived Logs in backup set 82
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- --------- ---------- ---------
1 1 1154833 20-JAN-16 1177422 20-JAN-16
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
83 3.88M DISK 00:00:00 20-JAN-16
BP Key: 83 Status: AVAILABLE Compressed: YES Tag: ARCL_BKP_FULL
Piece Name: /u01/backup/DB_FULL_ORCL_20160120_s92_p1
List of Archived Logs in backup set 83
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- --------- ---------- ---------
1 1 1162729 20-JAN-16 1188784 20-JAN-16
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
84 10.68M DISK 00:00:01 20-JAN-16
BP Key: 84 Status: AVAILABLE Compressed: YES Tag: ARCL_BKP_FULL
Piece Name: /u01/backup/DB_FULL_ORCL_20160120_s93_p1
List of Archived Logs in backup set 84
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- --------- ---------- ---------
1 2 1177422 20-JAN-16 1201833 20-JAN-16
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
88 1.81M DISK 00:00:01 20-JAN-16
BP Key: 88 Status: AVAILABLE Compressed: YES Tag: ARCL_BKP_INC
Piece Name: /u01/backup/DB_INC_ORCL_20160120_s97_p1
List of Archived Logs in backup set 88
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- --------- ---------- ---------
1 3 1201833 20-JAN-16 1204844 20-JAN-16
1 4 1204844 20-JAN-16 1204893 20-JAN-16
1 5 1204893 20-JAN-16 1204958 20-JAN-16
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
92 143.00K DISK 00:00:00 20-JAN-16
BP Key: 92 Status: AVAILABLE Compressed: YES Tag: ARCL_BKP_INC
Piece Name: /u01/backup/DB_INC_ORCL_20160120_s101_p1
List of Archived Logs in backup set 92
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- --------- ---------- ---------
1 6 1204958 20-JAN-16 1205034 20-JAN-16
1 7 1205034 20-JAN-16 1205253 20-JAN-16
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
96 80.00K DISK 00:00:00 20-JAN-16
BP Key: 96 Status: AVAILABLE Compressed: YES Tag: ARCL_BKP_INC
Piece Name: /u01/backup/DB_INC_ORCL_20160120_s105_p1
List of Archived Logs in backup set 96
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- --------- ---------- ---------
1 8 1205253 20-JAN-16 1205354 20-JAN-16
1 9 1205354 20-JAN-16 1205433 20-JAN-16
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
100 18.00K DISK 00:00:00 20-JAN-16
BP Key: 100 Status: AVAILABLE Compressed: YES Tag: ARCL_BKP_INC
Piece Name: /u01/backup/DB_INC_ORCL_20160120_s109_p1
List of Archived Logs in backup set 100
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- --------- ---------- ---------
1 10 1205433 20-JAN-16 1205519 20-JAN-16
1 11 1205519 20-JAN-16 1205559 20-JAN-16
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
104 128.00K DISK 00:00:00 20-JAN-16
BP Key: 104 Status: AVAILABLE Compressed: YES Tag: ARCL_BKP_INC
Piece Name: /u01/backup/DB_INC_ORCL_20160120_s113_p1
List of Archived Logs in backup set 104
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- --------- ---------- ---------
1 12 1205559 20-JAN-16 1205624 20-JAN-16
1 13 1205624 20-JAN-16 1205739 20-JAN-16
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
108 8.00K DISK 00:00:00 20-JAN-16
BP Key: 108 Status: AVAILABLE Compressed: YES Tag: ARCL_BKP_INC
Piece Name: /u01/backup/DB_INC_ORCL_20160120_s117_p1
List of Archived Logs in backup set 108
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- --------- ---------- ---------
1 14 1205739 20-JAN-16 1205796 20-JAN-16
1 15 1205796 20-JAN-16 1205840 20-JAN-16
If i ignore it and open the database, just my table in full backup come back but rows was not restored. I'm sure the problem is my archive log backup but i don't know how to solve it. Plz help me.Sorry for a long post.
> 1 and from the 1205841 SNA sequence
The SCN that indicates Oracle is above the range of SNA that you have in the ArchiveLog backups for sequence 1 to 15 (15 sequence ends at 1205840).
The message
channel ORA_DISK_1: restoring archives Journal
Archives journal thread = 1 sequence = 15
channel ORA_DISK_1: backup/u01/backup/DB_INC_ORCL_20160120_s117_p1 piece reading
channel ORA_DISK_1: piece handle = / u01/backup/DB_INC_ORCL_20160120_s117_p1 tag = ARCL_BKP_INC
indicates that he has restored the sequence up to 15
You can check the log file alert database instance for messages on the fact of recovery.
He is now asking sequence #1 it seems you did a RESETLOGS after sequence #15.
Note: If you have NOT issued a COMMIT after the line is INSERTED in the table 'Day', the recovery of the database will have no * transactions * to retrieve. An uncomitted transaction is cancelled.
Hemant K Collette
-
What is the best solution when my external drive for Time Machine is full?
Hello
I use the latest version of Mac OS X on my iMac 27 ". I use a drive outside of 3 TB G-Tech for Time Machine backup. Due to my recently many RAW photo images, I have less 8% left storage on my external hard drive, so I'm trying to figure out next steps in what concerns the strategy of external storage and have the following questions:
- When my external drive for Time Machine is full, it is my understanding that older backups on external hard drive will be deleted to make room for newer backups. If the oldest backups contained pictures (whose records have not changed since the time they are initially stored), then I guess that these photos will be removed from the external drive - correct?
- If I had to replace my external drive for Time Machine with a new external drive which is as big or bigger than the one it replaces, what should I expect on the size of the initial backup on the new drive? I guess the size of the backup would be exactly equal to the current amount of storage used on my drive hard iMac - correct?
- Would it not be possible to connect the external drive for Time Machine existing at a new Time Machine external drive so that when the original disk is full, the overflow will be automatically stored on the new external hard drive for Time Machine? (If feasible, it seems that this strategy would maximize my external storage capacity vs just replace external drives.)
I realize that my first two questions are rather basic, but I don't want to make any false assumptions. The third idea is intriguing and I would like to know if this is a viable option.
Thank you
Brian
older files are starting to get deleted because the disk fills up then Yes, they went
the backup drive should ideally be 4 times the capacity of your current drive, twice is good but has its limits. Also factor in what you store: a jpeg from the web and a raw photo file are the two images, the size of a is very different. If you work in high-resolution or large native files, or audio files (record pro, no music files) or video production twice the disk fills up very quickly. If you collect photos and JPEG and mp3 files or a handful of videos not so much is necessary.
I would keep the old drive intact if you want to replace and start over with a new drive, if that's the plan. You have the old data, you can keep it somewhere safe and have a redundant backup which you can reconnect at any time to restore from. Let the new index drive itself with new data and take if from there, in the case otherwise you can copy the backup to the new drive and set the drive as the new source of backup but personally I wouldn't copy of the data, that's my preference, it may not be yours and that's fine.
-
Gets the user cannot display the Web page when she tries to connect to hotmail.
I try on another pc in which the user of that pc had its hotmail upward. She took him out and tried to connect to his account and got the cannot display the Web page. She said she crossed and tried all of the suggestions that he gives. I tried to use Internet Explorer and Firefox. When the user is at home that she can get hotmail. There is no settings on our firewall prevents the user to access hotmail.
Hello, Tiffany Walker,.
The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:
Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.
-
Hello
need help with something really strange.
I create a Restaurant website: www.arkadasch.de
I test on my server the Site: www.bbaur.com/arkadasch
As you can see I got the top of the page an element Ede animated.
When I look at the site on my server www.bbaur.com/arkadasch, you see the element works correctly. You see on the two sites of the 'face' of the apearing name.
I have download the site now the clients site and the edge of animation is showning only half? Only the name of the left site is apearing and not that of the right?
I downloaded the same site two areas and it is always the same. My only he is on the right.
I have delate my cache also.
Someone has an idea?
WOW-found the error.
The name is written 'o'. and the psd file is named «Özden»
I have change the name of "ozden" to "zden', delate the German symbol 'o'.
Modify the edge of animation, save again, insert into Adobe Muse and now it works
-
How to change the Javascript code to make an exception for a single read command?
Hello
I posted a question earlier in another sub-forum and found this script that makes the form read-only fields. Now, I have a particular coding question.
First of all, here's the code:
var r = app.alert("Are you ready to lock this document?",2,2);
if (r == 4) { // 4 is Yes, 3 is No
for (var i = 0; i < this.numFields; i++) {
var fname = this.getNthFieldName(i);
this.getField(fname).readonly = true; // makes all fields readonly
}
}On the bottom of my form, I have a button that allows you to set the read-only form, but I also have other keys such as "print". How do I change the code above to make an exception for the command of read-only for my buttons so that they are still functional at the bottom of my form? I don't know anything about Javascript then this is a foreign language for me.
Any help is appreciated!
If (f.name == "FieldNameToExclude") continue;
-
The mouse event when the mouse is inside a link?
Is a mouse event fired when the user moves the mouse over a link in a PDF file?
If yes how can I register a listener for this type of event?
No, only form fields have such events, and so-called "mouse enter.
-
It's embarrassing. IWant to start using a less troublesome browser, but I like Firefox otherwise.
Have you tried to Reset Firefox preferences to troubleshoot and solve problems and remove the extensions. <>* (extensions.sqlite, extensions.ini, etc) files in the Firefox profile folder as cor - el suggested?
If you want to try "dynamite", try the steps 7 and 8 of the troubleshoot and diagnose problems of Firefox article: a clean reinstall of Firefox (remove the Firefox.app from the Applications folder and download (with Safari or another browser and install the latest version of Firefox from www.mozilla.com ) and finally create a new Firefox profile .) If a new profile-Firefox fix it, you can transfer your old profile data to the new profile.
-
Why make the audio for the whole sequence when you export only a small section?
If I export only a small part of my calendar, why the first emphasizes the provision of audio for the entire timeline?
Normally this wouldn't be a problem, except that my timeline has tons of audio on it and the window "made necessary Audio Files" may take 5-10 minutes.
Here is the link Jim referred to as:
Maybe you are looking for
-
Gmail email whenever I first open an email in the box of
Gmail automatically sends an email to the sender when I first open the email in my Inbox. Why?
-
Is Satellite A100-233 does support Bluetooth?
HelloI have the Satellite A100-233. Can I establish internal bluetooth adapter in this model? Thank you
-
Fingerprint Software does not work with Firefox after an update
Hello the first thread that I started this topic is closed, so I have to make a new... As mentioned here http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25776&TSTART=15 Fingerprint Software no longer works with Firefox after up
-
IPhone gets no service after the replacement of SIM card
Hello Today, I changed galaxy S4 for Iphone 5. Now, I get no service, even if the WiFi worked very well. Can't receive or call any messeges or phone calls. What could be the problem? I took the SIM card of my galaxy outside but did nothing yet (excep
-
We have two Thinkpads in the House, a R50 and X 300, connected to a hub of wifi 802.11 g. The R50 loses its connection much more easily than the X 300, and I see properties of logins its power output is 12.6 mW compared to 31.6 X 300 mW. Is 12.6 mW t