IPhone gets no service after the replacement of SIM card

Similar Questions

• Dell external display stopped after the replacement of graphics cards

  How to reinstall Dell external monitor to display my MacBook Pro 17 2011? Monitor has ceased to recognize the computer after Apple Store replaced the graphics card.

  (a) check and plug your adapter and adapter cable goes to the LCD screen

  (b) select another resolution in the displays control panel by pressing OPTION when you click on "scaling".

  (c) resets the monitor to factory conditions using the monitor Panel.

  Try another LCD, or another cable or both.

  If after trying this you get no video contact Apple and let them know your GPU replacement may be damaged.

• After the replacement of my iPhone screen 6, front facing camera does not work.

  After the replacement of my iPhone screen 6, front facing camera does not work. The rear camera works fine, but when I switch to selfie cam I saw a still image of what was on the camera back; and on snapchat it simply refuses to move to selfie cam. I check to make sure that all connectors are deep-set. Any suggestions?

  If someone else that Apple will replace your screen they screwed up. If Apple has replaced your take screen back to the store.

• After having my system repaired, I can't have my mobile data card (wireless broadband modem) to operate. I can't get any service from the server.

  TBS wide BAND WIRELESS MODEM data

  I had to have my computer repaired, now I can't get my mobile card data (wireless broadband modem) to operate. I can't get any service from the server. I called them and they said that when the laptop has been repaired. The Ports were not tied and cannot open anything. All other elements of work of these ports (wirelsee mouse/printer and I explained this to the technician, it is only thought was to call in a repair service.) I think their answer is like the auto machnic said to go and change the air in your tires. Can you give me any advice?

  Hello

  I suggest you to stay in touch with your Internet service provider.

• Error 1068 when you try to start the WIA service after the installation of the W7 SP1

  Original title; Error 1068 when you try to start the WIA service after the installation of the W7 SP1. The scaner to my Epson Workforce 633 all-in-One printer does not work after that.

  SCANeR to my Epson Workforce 633 all-in-One printer does not work after the installation of the W7 SP1. I contacted Epson support and they told me I had to contact MS support to get help this isue. The problem is that something is not letting the WIA service to start and I am getting error 1068 when you try to start the WIA service.

  Hello

  Method 1: Try to uninstall and reinstall Epson drivers and related software.

  Visit our articles to do the same below:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Method 2: Also scan SFC (System File Checker) on the computer.
   http://support.Microsoft.com/kb/929833

  Hope this information helps.

• Windows 7 Home Basic will be activated not after the replacement of the motherboard has failed

  Hello

  My cousin has a copy available from Win7 Home Basic SP1 64-bit, which is an OEM pack and geographically limited in India.
  Recently, the desktop motherboard has developed a fault and it was replaced by the seller that it was under warranty (so assuming that to be the same brand and model of origin).
  After the replacement, he receives a prompt from time to time that the version of Windows is not genuine and a new product key must be purchased which means buying a new copy of Windows altogether.
  I tried to help him with his number and did some research on the microsoft Web site. I tried reactivate using the same product key, but get the message that the hardware has changed and the same key cannot be used. I also tried to use the phone activation method - but after entering all numbers of 9 series a message is read on that there is a technical error and the appeal is terminated. (But he does not say why the version of Windows cannot be enabled)
  I came across the following post which seems to suggest that the same product key can be used as long the motherboard is replaced for a foul and the brand and the model have not changed.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/after-replacing-my-failed-motherboard-Windows-7/b547458e-a1ae-45df-AE4C-e4d191fc8e6a
  I would like to know if there is a way to validate the Windows version now. We are concerned that both the computer and the BONES are authentic copies and licensed and it is not just that we need to get a new product key. I would like to know if there is a phone number or address of Microsoft office in India or abroad with which we can express our concerns.
  Thank you

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your problem clearly to the support person.

• How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  Hi Carol_971,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  I suggest that you try to start in safe mode and then try to log on to Windows using the default Administrator account and then remove the password for your account, check if it helps.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If you are unable to log on to Windows in safe mode, refer to the article below and then try the steps mentioned, check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

• BitLocker - encrypt - decrypt cycle after the replacement of the motherboard?

  After replacing the motherboard of your laptop with BitLocker encryption, the system requires a recovery key. Once inside, connect us to the system as long as decrypt it administrator local to turn off BitLocker and, once finished, activate BitLocker.

  This whole process of disabling and enabling BitLocker may take up to an hour to complete, during which the laptop can not be used by the user.

  Is it there anyway that we can re - initialize BitLocker, after a motherboard replacement, without all the decrypt / encrypt process?
  While the time that the system cannot be used is reduced to just a few minutes?

  Hi Dennis,

  Thanks for posting your query in Microsoft Community.

  I am afraid that you cannot re - initialize the BitLocker after the replacement of the motherboard as the TPM secure is removed or changed. A TPM Module (TPM) is a chip that is integrated into a computer. It is used to store cryptographic information, such as encryption keys. Information stored on the TPM chip may be more secure from external software attacks and physical theft. BitLocker uses the TPM module to help protect the Windows operating system and user data and to ensure that a computer is not tampered with, even if it is left unattended, lost or stolen.

  If your new motherboard does not have the required by the BitLocker TPM, you can refer to the section can I use BitLocker on an operating system without a TPM Reader? in the following article and follow the steps.

  BitLocker frequently asked Questions (FAQ) 

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• NB100 supplied with Bluetooth and the slot for sim card

  I wonder what model come with bluetooth and the slot for sim card,.

  The NB100? Have a look at the brochures on the Toshiba site.

• How to simulate the change of sim card

  Hi friends

  I want to simulate the functionality of changing the sim. If I'm erasing all data on mobile, then I lost all data. Is there a solution to implement the scenario of change of sim card.

  You can simulate the change of SIM card on Simulator-

  Steps for BB JDE-

  
  

  1.) go to the Menu bar - > edit-> preferences

  The Simulator 2 tab.) -> Network tab->

  # ICCID (GPRS) / ICCID override (GPRS)
  

  # IMSI (GPRS) / IMSI override (GPRS).

  Enter here any value in the format - www.xxx.yyyy.zzzz (e.g. 5600.5478.02145.121)

  3.) click apply. Close.

  4.) now when you run the Simulator, it generates a warning.

  Given IMSI (5600.5478.02145.121) is longer than the maximum length (15).

            Click on continue.

  Steps for Eclipse-

  1.) select your project in the Package Explorer-> right click-> Debug as ->Debug Configurations ->

  2.) select DebugServer from the left pane of the window.

  (3.) the right side of the pane, there are four tabs-> go to the Simulator.

  4.) be that cannot change default Simulator, if we are to make a new profile.

  5.) don't forget the new profile is selected. Now, select network tab.

  6.) steps 2, 3 & 4 above.

  
  

  Now, it will give u a simulation of change of default SIM card IMSI value is 666666.01.234567.8

  Thank you

  Kanak Sony
  

• BlackBerry Smartphones 1 BB... The T-Mobile SIM card contacts will not be displayed on my BB 8300 unlocked from AT & T

  Hello

  I just bought a used BB 8300 from AT & T. It has unlocked and works with my T-Mobile SIM card but phone contacts do not appear in the address book. Suggestions does

  No I did not, I read your menu choices that relate to plans talk or in your case, flex of compensation plans.

  You have an address book. Open and go to the phone's SIM card and copy all your SIM contacts in the address book of BB.

• HP envy 17 can not boot windows or using recovery DVDs after the replacement of the motherboard

  Hi all, I need your help

  first of all sorry for my English but I'm from Greece. I really don't know a lot about the mobile only very basic computer.

  I have a hp envy 17 3d 2080en with windows 7 Home premium which, after overheating, chips to the motherboard. I ordered and installed a used motherboard from China (part 630793-001 hp number).

  After that I tried to start the laptop, but when he opens he said probably due to the change of the material he cannot start windows normally. After reading a lot on the internet, that I tried using the recovery DVDs I had prepared before the problem, but they will not start just yet. Then, I tried to use the cd system repair but again no luck.

  I looked in the bios as some people say on the internet and realized that the product number and serial number are different from those of my laptop and it's maybe part of the problem, but I don't know. I looked in other posts about similar problems, but did not get a definitive answer and this is why I post for your help.

  Thanks to you all

  Nikos

  IF YOU HAVE AN HP LAPTOP (MINE IS HP ENVY 3D 2080EN) THAT YOU HAVE CHANGED THE MOTHERBOARD WITH ANOTER ONE (MINE WAS FRIED OVERHEATING) AND AFTER REPLACING YOUR LAPTOP DOES NOT START AND YOU CAN'T FIX IT WITH SYSTEM REPAIR DISC OR DOES NOT PERFORM A CLEAN WINDOWS INSTALL OR DON'T LISTEN NOT A RECOVERY CD/DVD RECOVERY THEN EXPERTS HP WHO KNOW NOTHING. LOOK IN YOUR BIOS, AND IF YOU SEE THE PRODUCT NUMBER OR SERIAL NUMBER DIFFERENT THAN THOSE APPEARING ON YOUR COMPUTER (USUALLY IN THE BATTERY COMPARTMENT) THEN GO TO A HP SERVICE ALLOWED AND TELL THEM TO HAVE YOYR TATTOOED BIOS. WITH THE TATOO (COST US $ 40), THEY WILL REPLACE THE NUMBER OF BAD PRODUCT AND/OR THE SERIAL NUMBER WITH YOUR MOBILE PHONE NUMBERS AND YOUR PROBLEM IS SOLVED. MY MOTHERBOARD HAS BEEN FRIED TO OVERHEAT AND I BOUGHT A USED ONE FROM CHINA. AFTER I REPLACED IT THE LAPTOP WOULDN'T START AND WOULD NOT ALLOW ME TO REPAIR DVD HE OR EVEN THE USE OF RECOVERY. I CALLED HP SUPPORT, I EVEN JOINED THE HP FORUM TO ASK FOR HELP AND I GOT ONE EXPERT WAS USUALLY TRY THIS OR TRY THIS. DON'T LISTEN TO THEM. FINALLY, I READ AN ARTICLE FROM THE INTERNET THAT EXPLAINED THAT WHEN YOU CHANG THE MOTHERBOARD / SYSTEM BY ANOTHER THEN THE BIOS REFERS TO THE NEW PRODUCT NUMBER, MOTHERBOARDS AND/OR THE SERIAL NUMBER AND THIS WAY THERE IS INCOMPATIBILITY WHICH DOES NOT ALLOW WINDOWS TO START, YOU CAN NOT REPAIR WITH SYSTEM REPAIR DISC OR IT DOES NOT PERFORM A CLEAN WINDOWS INSTALLATION OR A RECOVERY CD/DVD RECOVERY. ONCE YOU TATOO THE BIOS THATS IT. THE LAPTOP WORKS. I HOPE THAT THIS MESSAGE WILL HELP SOME PEOPLE WAISTING THERE TIME AND SPEND THE MONEY FOR NOTHING

• After the replacement of memory, XP stuck in a restart loop

  I replaced two 128 cards memory sticks with two 256. Now I have problems with WIN XP reboot loop. Can someone help with this problem of closing?

  * original title - I replaced two 128 cards memory sticks with two 256. Now I get the reboot loop problems with WIN xp *.

  Run: Memtest86 +.
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.

  Start with one stick of 256 MB and after at least 3 full passes (without error) and then add the second stick of 256 MB and let memtest run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  J W Stuart: http://www.pagestart.com

• I get this error after the last update WindowsUpdate_80200053

  I have the 64 bit version of vist home.

  After the last patch of weeks

  "Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x 64

  "Download size: 25,7 to 82.7 MB.

  I get the error WindowsUpdate_80200053. Also now I can't download active x controls, updated maleware deleting files (Spy bot s & D gives check sum errors), any web site, including the Microsoft Update download (I get warnings of the author is unknown and corrupted file warning.)

  My wife has the 32-bit version and having the same problems.

  Hello Stdonitus,

  Please try the steps, in order to verify if there is no virus or Spyware issues below.

  1. run the Microsoft Windows malicious software removal tool

  2 download, install, update and run: (freeware) SUPERAntispyware and Malwarebytes' Anti-Malware (freeware).

  3. run this analysis online (safe mode with network, if possible):
  http://OneCare.live.com/site/en-us/Center/howsafe.htm

  4 see and follow carefully:
  "Looking for / help with software, spyware software malware and Hijackware.

  If you need help with virus-related issues, contact the Support Services Microsoft product.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  If you need more assistance for the position of virus/worm to the Microsoft Newsgroup - security - virus.
  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Security.virus
  Via the Web:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Security.virus

  I hope this helps.

  [If this post can help solve your problem, click on the button 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Reinstall Office 2007 on Vista after the replacement of the HD

  I am trying to reinstall Office 2007 on Vista after I replace my HDD ' cos my old one failed. When I run the installer, I get a message saying that the bootstrapper has stopped working. I got the same message on the original installation, but forgot how to solve this problem. Someone help me please

  Office:

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions of general issues of the Office.

  They will help you with your office questions when repost you in the Office discussion groups above.

  See you soon.

  Mick Murphy - Microsoft partner