Why can't my androgenic computer on its own without warning?

Similar Questions

• Windows 7 stops on its own without warning

  My pc running windows 7 Home premium keeps stopping on its own without warning - I checked and its not overheating there are a lot of ventilation. I was told that it may be registry settings but don't see why I should pay for a reg cleaner because I do not know if it will solve this problem

  A Reg cleaner will cause more problems than it will fix. If the PC stops while using it, then see the test below tools. If it stops while his idle then you will need to check and change your power plan.

  First try running Memtest86 +, that runs from a floppy disk or CD and should eliminate or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours, so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard? Visit their site to support for the latest drivers as the CD that came with the motherboard may have older less stable drivers.

  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  Discover also Nvidia 'Smoke' test or equivalent ATI.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 3 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  For overclockers using stock Intel/AMD radiator and cooling fan
  You can expect temperatures of 35 to 40 ° C in idle and 60 to 65 c max when running Prime95
  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ):
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  Also has two tabs (memory and SPD) that indicates the actual speed of the memory
  and 'SPD' tab displays the nominal speeds for each memory location that is filled.
  http://www.CPUID.com/cpuz.php

  Hard drive test - CD Bootable:
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD
  For Western Digital disks using WdDiag: http://support.wdc.com/product/download.asp?lang=en
  Fujitsu utilities: http://www.fujitsu.com/us/services/computing/storage/hdd/support/utilities.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• I lost my recovery for Windows Vista disk. How can I restore the computer to its original factory State?

  I lost my recovery for windows Vista disk. How can I restore the computer to its original factory State? I can't find how to create recovery discs, I did not have this option in the Recovery Manager

  Hello

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How can I recover my computer to its original factory State?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: How can I recover my computer to its original factory State?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: How can I recover my computer to its original factory State?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hey elcuervo33

  Contact the computer manufacturer and ask them to send you the vista recovery disc reinstall vista to how you bought your computer

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  Walter, the time zone traveller

• Why can't unlock my computer with the password

  I can't get my computer unlocked the password and when I put my password I get this message. the user profile Service service has no log that user profile cannot be loaded... ideals why?

  Hello

  You can try the following.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• How can I restore my computer to its factory settings?

  I have a Toshiba Satellite L30-105

  I * don't * all CD' of recovery.

  How do I * restoration * new portable computer to its * factory settings *?

  pls help...

  Order the new CD/DVD recovery (if possible) and you will have factory again.
  Try to order under the https://backupmedia.toshiba.eu/landing.aspx

• my cursor floating to and disrupt the layout, how can I restore my computer to its original state

  my cursor keeps floating offshore on its own and changed the fonts on my computer and do not know how to restore it to its original state

  Hello JeanSteel,

  I suggest try to perform a system restore to a time before having this problem.  If you want to restore your computer to factory settings, I would suggest contacting the manufacturer on the guidelines for this.  Also, be sure to back up your data before doing this.  Here is a link to perform a system restore.  Please let us know status.

  System Restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Thank you

• Why can I not connect computer at home?

  I want to download edition student and teacher cs6, which I bought it.  When I try to connect to adobe.com/go/ols_edu_login/ to start the process, the small cursor will just always.  I can connect from my computer desk or phone, but not my computer.

  Please, try to connect from another browser and check.

• How can I get my computer out of fashion without failure - has been a problem for a month.

  I have bin trying for almost a month to escape to the Safe Mode.  How can I recover my computer? Please give me advice.

  Hello

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  See you soon.

• Why can't my portable computer product for xctivate key it says worked and then click Next when iam ready I do and he said weong key

  computer laptop notebook pc hp2000

  date of born on 24/06/13

  product # D1E81UA

  SYSTEM BOARD ID 188 B

  CT # PCUZLOOWD4K4SN

  TO THE BIOS.   F.47

  K I HAVE A QUESTION THE OTHER DAY ANDF I THINK IT WAS THE RIGHT ANSWER BUT I DIND'T WORK AT THE END I GT AN ATHEIST ANSWER AND IT IS HOW TO GET YOUR PRODUCT OUT OF THE BIOS... SLUI. Exe3 AND THERE I GAVE the SAID PRODUCT KEY I WENT AND TRIED to ACTIVATE WITH IT AND I GOT THIS KEY PRODUCT has WORKS WHEN YOU ARE READY CLICK NEXT...  FACT AND IT WORKS I did NOT not!

  IDONT UNDERSTAND REALLY THE LAPTOP CAME WITH 8 AND IT WAS FINE WHEN I GOT IT PRODUCT KEY AND PEOPLE ALL THEN PUSHY AND PUSHY ADS PRETTY MUCH FORCE IS IN UPGRADUNG I NEVER WANTED TO, BUT I DID THE FOLLOWING ARE KNOQW THING HAVE TO BUY SOMETHING, MRDIA. RECOVER...  WHO KNOWS WHAT ELSE THEN MY COMPUTER IS BLOCKING IT SAYS CANT GET 8.1 ON CAUSE BIOS RETURNED TO 8...  OK SO THERES 2 VERSIONS OF WINDOW, WHY IT DON'T WORK IS BEYOND ME BYT I KNOW I BOUGHT THIS COMPUTER IT WAS FINE WITH WINDOWS 8 AND I ALSO BOUGHT WINDOS MEDIA 8 WINDOWS 8 AND ALSO WINDOWS 8 AND 6.1 RECOVERY DISK YOU ARE WRONG SO FIND THEM IN YOUR MAIL, I JUST WANT MY LAPTOP KEEP EVERTHING ELSE...   THANK YOU ALL FOR EVERYTHING THAT YOU HAVE FACT JUST WANT MY LAPTOP ON WINDWS 8 WHEN HE WAS BORN ON 24/06/13

  Try the phone activation:

  Press the Windows key + X , then clickrun, then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Why can't Stickies app note remember its position?

  I have a few Stickies by virtual desktops. The problem is, whenever I have to restart the OSX, because an update of the OS for example, a sticky note does not restore the virtual desktop that was before restarting. So, I have to move EVERY post-it for each workstation (I have 9 virtual desktops) manually. Why they don't remember which office they were before restarting?

  I created myself: https://github.com/lucasribeiroufrj/sortStickies

• Why can't start my computer in safe mode to do a system restore?

  When I try to go to eyetem restore in safe mode, it will not go. I think I get

  Registration errors can help with this problem?

  It is somewhat similar to the following Technet problem:

  "SP3 hangs at agpCPQ.sys during startup"
   
  who offers this article as a solution:

  "Problems when Windows XP tries to load the Agp440.sys service.
   < >http://support.Microsoft.com/kb/324764 >

  That may help your problem.
  HTH,
  JW

• Why can't access my control panel its says class not registerd

  Whenever I am trying to access my control panel it says class not registered: {26EE0668-A00A-44D7-9371-BEB064C98683

  This anomaly can be solved with the installation of Vista Service Pack 2.

  About how to obtain the latest service packs for Vista, please see Microsoft KB935791atricle.

• How can I return my computer to its original settings?

  I think I know, but I'm afraid to do so.    Go to security and protection, then HP recovery.     Thank you

  I have windows 8, it is identical to 7.

• Photosmart HP 6520: Printer work and print a blank page, on its own without input from any computer or device.

  I use a configuration of Photosmart Printer series 6520 linked to a Comcast Cable modem router /wifi.  I use WPA2 security with a long password. (I also tried setting by using the system of the WPS - with changes in symptoms). With this router, the wifi connection I share with

  1. MacbookPro computer
  2. iPhone 6SPlus
  3. 12.9 inches iPad Pro

  The symptoms are:

  At random times during the day or night, you can hear computer works as if someone sent a print job.

  1. You go to the printer, and the front panel display is on.
  2. There is an empty of leaves paper ejected from the printer.

  In the night when in bed and all devices are disabled except router and of course the printer, I can hear the printer works and then I wake up the next morning and there is a blank sheet of paper in the output tray.  I'm off to put the paper in the paper tray.

  I keep the printer on 24 hours a day, because as ink jet printer inks tend to dry out the exposed to natural air. And HP recommends keep printer to prevent dry ink clogging in the head. I understand everything power is suspended unless the circuit warming (and it appeared to work that way until quite recently).

  Although it made no difference, I just update the HP Update version 5 driver sent from Apple.  It turns out that it is the wasted effort, and I lost my custom configurations because the driver for my printer has not been updated for at least two years. He always uses the version 4.2.5 of the driver. (El Capitan is X.11.6 with the latest security updates).

  Printer works fine otherwise.  Suggestions?

  Yes, it made no difference. The façade has finally exploded but ocassion, it still ejects a sheet or two of paper.  Guess it's irreparable. I can live with. Works fine in the case.  Just close it as insoluble.