Why Center them Vertical align objects along the horizontal?
And why Horizontal alignment to center align the objects along the vertical?
-g-
P.S. Please please please do the Eydropper tool available by function key so I can switch to it by using the text tool. Please, I beg you!
g,
but when I select both objects and click the align vertical that they align themselves with an invisible horizontal line
It's (almost) identical to:
Because (the centers of) lined up beside the objects will be on the same horizontal level/line.
And it's just a way to express what vertical alignment means. Here are some others:
Their centres are the same height,
Their centers have the same value of Y on the Board/chart workspace.
In all cases, you can draw a horizontal line through their centers.
Mathematically, Y = C (there is a C constant value) is the equation of a horizontal line.
Tags: Illustrator
Similar Questions
-
Align vertically an object in the browser window.
Hello
I searched the previous posts on this subject, and I have not found an answer.
I need to align vertically an object in my browser window. Here is an example: http://www.adgcomunicacao.com.br/valign/
How is that possible? The PIN options only let me PIN to low or high, but not the vertical center!
Where is the button?
Thank you!
Chris.
Well, I'll be more specific: There is no Center vertically to window option in Muse.
The only element that centers vertically, is the Lightbox slideshow/Composition widget.
-
How can I Center objects in the center of the page? that is, all centres must overlap with the center of the page?
If you go to window > object and layout > Align, you can align objects with each other (selection), but also at the margin, spread, or page.
-
I downloaded an upgrade HP suggested and just after, had a paper jam. I have authorized, but then got the error message: cartridge stuck.
I couldn't find the cartridges in a first time (they were caught completely to the left), then the belt to see if I could make it appear. Nothing helped, and... uh - oh - guess that I would not do.
Finally, I spotted the cartridges, slipped to them where they were supposed to be, and the printer worked. Except now, descending by the offset of the page become for two and some lines (first part crushed), indentation of about an eighth of an inch of horizontal lines. Then, on a half inch below the page lines come back to correct the record. Then they go again shifted, which cycling through all the way to the bottom of the page.
How, please, can I restore the vertical alignment?
I have a MacBook Pro with OSX 10.7.5. All my HP applications are dated 5 March 2012
(I'd be happy to be notified when there is response, [edited by Moderator] Thank you)
Hi dickns33,
I'm glad to hear that you found someone else and it works. As for the former, although it is very nice and respectful to donate, make you a good point about someone buy it and be disappointed in the quality of printing. I think the best thing to do is to recycle.
HP has recovered more than 2.3 billion pounds of products for reuse and recycling. HP helps to extend the life of THIS material through our programmes of refurbishment, reducing the environmental impacts and make it accessible to the largest equipment. We recycle products that are more suitable for re-use. - This presentation text and additional information are on the following Web page. 70 countries and territories around the world where we are collecting used products for resale and recycling.
Thanks for the rest a loyal customer of HP and to hang in there all the way with me here on the HP Forums. If you need a helping hand, feel free to reconnect and reach out.
-
Why can I not move objects to the bottom of the timeline in the video?
Hello
Why can't I move the new object I inserted (this is a PNG image) all down the timeline just above the video/audio? That's where I need?
I edit the video with stripes, zooms and slices. I really hope that I can move it to the bottom of the timeline.
Thank you
This a cpvc of the project, right? Several chronologies are open when necessary, and it is indeed not possible (as in cptx projects) to change the stacking order. However, this could be a workaround: move the timeline you want to down horizontally until you have an empty space: you can then move it to the bottom. You'll go up the other deadlines in the location where you want to have this object at the bottom... Then, you will have to move again. Very heavy, I think it's much easier to think before you add objects and add them in the right order. CPVC-feature did not get much attention, after it was introduced, it is probably not that popular?
-
I created a text box by dragging the horizontal text tool.
But when I start typing, the text aligns along the top border of the box rather than be written inside.
It looks like this.
How can I fix it, so that the text is inserted inside the defined area?
Many thanks in advance!
I just thought about it! Do not think that I was clueless.
I just had to change the height of the font to 100%. Haha
-
Is there to align objects on the outside of the race
So, I have a few thick lines on some objects and want to align all.
I can't have the feature "inside", it is set in the Center. So, there are a few points thick dangling 'more' of the actual object.
Is there to set the align attribute to hit from the outside of the race?
Nick,
Edit > Preferences > General > use Preview Bounds is your friend here.
-
Hello world
My application has a HTTP connection to retrieve the XML stream and insert data to the ListView using DataSource and DataModel, and I want to hear at each of its ListView ListItem is created and completely to use a ListItemData for my c++ object. So I write my code like this
In main.cpp
int main (int argc, char * argv)
{
App app (argc, argv);
new MyApp (&app);)
returnApplication::exec();
}
In MyApp.cpp
MyApp::MyApp (bb::cascades:Application * app): //constructor
{QObject (app)}
QmlDocument * qml = QmlDocument::create("asset:///main.qml").parent(this);
QML-> setContextProperty ("app", this);
AbstractPane * stream = qml-> createRootObject
) App-> setScene (NCA);
}
void MyApp::doMyFunction (const QString & someData) {}
qDebug()< "yes!!="">
}
In main.qml
{Page}{Of container
{To ListView
dataModel: myDataModel
listItemComponents:]
{ListItemComponent}
type: 'point '.
{Of container
onCreationCompleted: {}
Console.log ("-LISTITEM ONCREATION COMPLETED");
app.doMyFunction (ListItemData.someData); //< but="" console="" print="" about="" "can't="" find="" variable="" "app"="">
}
}
}
]
} //end listview
} //end container
onCreationCompleted: {}
myDataSource.load ();
}
attachedObjects:]
{GroupDataModel}
ID: myDataModel
},
DataSource {}
ID: myDataSource
Source: "some URLs to get RSS... blah blah."
type: DataSource.Xml
onDataLoaded: {}
myDataModel.clear ();
myDataModel.insertList (data);
}
]
}
I try to run mycode. But a console is printed on "can't find variable: app". " How can I solve this problem?
Thanks for any suggestions.
MAZIts because the listitem is not in the same document as the Page tree really, he lives with ListView and does not have direct access to the elements of the Page.
What you can do is create a javascript function in the ListView, and then the listitemcomponent facing, which in turn can relay to your environment variable "app."
int listitemcomponent add id: itemContainer your container can
itemContainer.ListItem.view.someFunctionDefinedInTheListView (data)in the listview:
function somefunctiondefinedinlistview (data) {}
app.doMyFunction (data)
} -
align objects on stage throughout the timeline
I'm new to Flash and am missing probably the obvious.
I want to select objects on the stage and move them to a new location or align them to one line guide. However, I want to do it for a whole series of images in the scenario. In essence, select all images in the scenario, and then select all the objects on the stage and align them to the left and the top side.
However, it seems that to align objects in the active frame.
I started with a circle on the stage, then added several keyframes in the timeline, by changing the fill color to different key frames.
Is there another way to do what I want?
Thank you
PatrikI found it... Change multiple images.
-
Vertical alignment of the table cell can be defined via CSS?
In a table cell (IE, 'td') is it possible to define "valign" via CSS, instead of table cell appropriate?
In other words, instead of...
< table >
< b >
< td valign = "top" >
.. is it possible to do:
< table >
< b >
< class td = "top" >
.. somehow, .and allow the stylesheet to define the vertical alignment?
I ask because none of the attribute in Dreamweaver CS4 presets seem to provide for vertical alignment. Everything on God's Green Earth seems to be there, but the vertical alignment of the cell table seems to be the ONLY thing THAT forgotten CSS.
miyeager, I'm sorry, I misread your question. Yes, you can. Use ' vertical-align: top of the text.
-
Is there a way to make a shortcut to align objects to your plan of work?
Hi Adobeans,
I'm looking for a way to assign a shortcut custom, in particular, orders for Horizontal alignment to Center and Center them Vertical in Illustrator CC 2015. I am a production artist and am constantly centering the elements on my page when I work with pre-created art, so it would be extremely useful, instead of having to move my mouse to the controls align at the top of my toolbar and clicking on these two.
I did assign keys custom order autocorrelation in InDesign (align on the Page/margins, etc.), but can't seem to find a place to type in keystrokes custom for this in Illustrator. Is simply not a command, you can assign shortcuts to that? Or is there a workaround?
Thanks in advance!
You can record an action and assign a shortcut.
-
Script to distribute the object for the page, margin, or the spread?
I see I can create shortcuts to align objects to the page, margin, and the spread, but I can't specify to what I want to distribute an item! I went through the list in the Shortcuts dialog keyboard again and again, I don't couldn't find it! Why is this omitted? Is this an oversight?
And my main question: how is this possible? There the script to achieve this goal?
Thanks in advance!
Well, in general is not a good idea for the scripts modify the user's selection. Unless the purpose of the script is that the user sees that other things are selected.
You can get an array of all the objects on the current dotted with app.activeWindow.activeSpread.allPageItems but that will include the internal elements of groups. If you want the elements of higher level (including groups), use () .getElements () app.activeWindow.activeSpread.pageItems.everyItem.
So to do what you asked, you can select all with:
app.select(app.activeWindow.activeSpread.pageItems.everyItem().getElements());
But if your goal is to distribute to each of them, use:
app.activeDocument.distribute( app.activeWindow.activeSpread.pageItems.everyItem().getElements(), DistributeOptions.HORIZONTAL_CENTERS, AlignDistributeBounds.SPREAD_BOUNDS);
-
problems of centering (vertically) a button on the screen
Hello.
I have a blackberry 10 cascades app with the code below.
How could I get the button to fill the entire screen? I would have thought the following would do the trick, but it doesn't. The button expands horizontally to fill the width of the parent, but vertically the buttn just at the top of the screen the same as if I had not called setVerticalAlignment() at all.
Any ideas? Maybe it's a bug?
Thank you very much in advance.
//-----------------------------------------
Page * Pg = new Page();
Button * butt = new Button();
Welding end to end-> setText ("well");
Welding end-to-end-> setHorizontalAlignment (HorizontalAlignment::Fill);
Welding end-to-end-> setVerticalAlignment (VerticalAlignment::Fill);PG-> setContent (Butt);
Application::instance()-> setScene (Pg);
I really expect that this works only inside a container with a DockLayout. I don't know what pages in terms of layout, but I'm going to guess that they do nothing, which would mean that their single 'content' component would not adjusted at all position and sat at 0,0 or the upper left corner.
It looks like you to experiment a little... in practice, I don't think that someone never put a single item non-conteneur on a Page, but generally always a container of other stuff in it. The default value for a container is StackLayout, so you will need to change to DockLayout and default alignment for stuff is Left and Top, so it should work with your Center for vertical alignment.
-
I converted a Robohelp 5 project to Robohelp 8. Since then, I've noticed that the HR Center aligns the contents in table cells even if vertical alignment toward the top of the cell is selected. This seems to happen more often if the text drop-down DHTML table. Is there a way to force the vertical alignment upwards in the cells without having to recreate the table?
A similar question was published in the forum for more than a year for an earlier version of HR but was never answered. Here is the link:
.There is a bug in RH8. The alignment of your output will be OK.
See www.grainge.org for creating tips and RoboHelp
-
Center text vertically on a line
I need to figure out how to center the text vertically.check it out to see what I'm talking... I want to center the text "grind time" to be centered with the media player and add to Cart button www.l3thalproductions.com/productpage.html
l3thalbeats wrote: worked fine on my flash media player, but does not give me the possibility to align the absolute middle on the add to Cart button
Your images appear to be included in the following twoand tags:
http://i236.Photobucket.com/albums/ff11/sulphurtors22/add-to-Cart-button.jpg"alt ="PayPal - the safer, easier way to pay online how!"border ="0"/ >
https://www.PayPal.com/en_US/i/SCR/pixel.gif"width ="1"height ="1">
You cannot align these tags using align or valign attributes. Him are deprecated attributes.
Try a style attribute and align the images with a pair of property: value - namely, vertical-align: middle
The attributes are entered as followsand
TAG: http://www.w3schools.com/tags/tag_img.asp
TAG: http://www.w3schools.com/tags/tag_input.asp
Maybe you are looking for
-
How to fix the folder flashing with question mark on mac pro
I have a problem with my mac pro. When I press the power on button, the grey of the screen become a folder flashing with question mark appears and it does not start. What should I do? I don't have an os x on a cd so I can not ignore the system...
-
Regarding windows update...
Can someone tell me why windows will update your computer without your permission. I was in the middle of play the Sims 3... were not spared. Set Windows to update by itself. I lost my whole game I had played for 3 hours. Its supposed to prompt you,
-
With XP Pro SP3 and Win 7 x 64 network connectivity issues
I have three computers on a home network via the connection to the router. Box 1 running XP Home. Box 2 XP Pro SP3 and the box I use is (my main box 3) running Windows 7 Pro x 64. In Norton 360 all the boxes appear. The Win 7 system does not appear i
-
That spooler SubSubsystem App has stopped working and was closed does mean?
Spooler SubSystem App stopped working and was closed means. I can't get my printer to print at all. Not even a test page.
-
A that someone finds a solution or a mouse that works to align it with the function?
OT: Mouse Snap to. A that someone finds a solution or a mouse that works to align it with the function? I see that this topic has been posted a few times, it's pretty frustrating to not have it. And like someone else posted, I mean the option 'Autom