Why changing Date and time?

Similar Questions

• The batch change date and time

  I have a lot of photos which, for some reason, have lost their correct dates and hours of creation, so I was eager to correct in an easy and enjoyable way.  I unfortunately discovered that Photos is not the batch option to change that used to be in iPhoto.

  When you try to find a solution to my problem, I fell on this batch Change Date and time on a fixed Date, which works well, but not quite how I want it.  What I want to do, that's exactly what the script above does, but rather than increment by 1 minute of each photo, I want to increment by 1 second intervals by photo.

  Having not really used AppleScript before, I tried to change the references to the 'minutes' to 'seconds' but that did not work.  Is it possible to do using above seconds instead of minutes?

  Any guidance would be greatly appreciated.  Thank you.

  Just delete the text "" * minutes ' in the lines where the date is changed. "

  Then time will be incremented seconds.

  For example, for the first version of the script use:

  the value timeIncrement to 1 - increment of time in seconds

  (* select at least 2 images in Photos *)

  say application 'Photos '.

  activate

  game imageSel for (get selection)

  if ({ is } imageSel) or (the length of imageSel < 2) then

  error "Please select at least two images."

  on the other

  defined first_image to the point 1 of the imageSel

  the value first_date to (the date of first_image) as date of

  Repeat with I from 2 to the County of imageSel

  put next_image to the point I of imageSel

  the value next_date to (the date of next_image) as date of

  the value time_difference to (first_date - next_date) + ((i-1) * timeIncrement)

  say next_image

  the value le Date of next_image to (next_date + time_difference) as date of

  end say

  end Repeat

  end if

  return "Set the date and time of" & (the length of the imageSel) & 'photos. The last date is "& ((the date of next_image) as date)"

  end say

  
  

• Why the date and time is wrong when I start my computer

  Why the date and time is wrong when I start my computer

  CMOS battery die/of - usually about the size of a quarter on the motherboard of your system.

  It keeps things when you are not using the computer - if it starts to die/dies - then the time is no longer maintained.  Replacing, it is no different (in most cases) that replace the batteries of your TV remote or FOB car key.

• Change date and time on a HP Officejet Pro 8600 Plus.

  How change/set up the date and time on a HP Officejet Pro 8600 more when the date / time under function State of preferences function is locked? My computer is an ASPIRE Z3371.

  Thank you, thank you, thank you,

• Win 7 Home Premium: Why systyem date and time could skip the 01/01/2000

  Hello

  Today I start my Win 7 PC to hibernation and discovered that the system clock was jump back 20:20 15/08/2012-08:05 01/01/2000.

  I rebbot PC back the date still stay to 01/01/2000.

  Can I know the causes of this p [problem and how to avoid that happening again in the future?

  Thank you

  Low

  Means generally that the battery cmos on the motherboard failed.

  When you start Access Bios, usually by tapping the Btn Del, then reset the date and time, save & exit. Then see if it sticks

• Change "Date and time dialog box.

  Hi all.

  Is it possible to change the time and Date dialog box that is displayed in a time and a Date control? There are several details, I want to change, for example, translate the labels in Spanish, or remove the 'Help' button.

  Thank you very much

  Francisco

  Check out this thread.  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=421557

  The dialog box is a VI that is stored in the directories of the LabVIEW program.  I would not recommend changes that affect everything else that you would do in LabVIEW.  But if you make a copy, do not show the button browse on your order, but do a similar button that calls the a copy of the VI that you modified to your liking and have your code to manage the treatment of this button as the writing of the date / time selected for the control, I think you do have a behavior similar to the way the native LabVIEW control behaves.

• Change date and time

  Only the local time zone is available. There is no other time zones in the time zone settings dialog box. How can I activate the other time zones?

  Here is an article on how to change time zone in Vista (but I guess you already know this): http://www.vistax64.com/tutorials/114997-time-zone.html.

  Here is an article on how to restore missing time zones by default Vista (that I think will fix your problem): http://www.vistax64.com/tutorials/114997-time-zone.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Date and time of change of batch

  Mac running El Capitan with the latest version of Photo

  When I try to batch change date and time on some old 50 photos that have been digitized on days different and downloaded in the library of my pictures the results aren't good. The days and hours can vary a lot.

  When I checked and changed a lot of photos that have been taken or analyzed the day everything seems to work fine. Why? Is there a simple work around?

  If you do not change the dates butare, added dates for digital photographs (Digital Photos do not have EXIF/IPTC data then do not use the control change time data - using the user script Script: batch change Date and time on a fixed Date )

  LN

• Evrytime I connect me, I have to reset my date and time, why?

  Why my date and time do not be saved? Why should I reset each time my date and time?

  Hi NarendraNP.

  Here are three possibilities about why this is happening to you.
  1. The time in the BIOS is not set correctly. Therefore, every time that you start the PC the incorrect time is displayed. To correct, shut down the computer, turn it on and immediately go into the BIOS settings. Check that the date and time is defined, save and exit, then start the computer normally.
  2. The CMOS battery is dead and needs to be replaced. To fix, you have to expose the motherboard and replace the small type CR2032 on motherboard. You can find many videos on YouTube that will show you how to replace a motherboard CMOS battery.
  3. You don't have administrator rights to the computer to change the date and time, or there is a program installed on the computer that locks the system setting changes (an example of a program that does this is Faronics DeepFreeze). The only solution for this is to temporarily disable the program that is to lock the Control Panel, or ask a system administrator set the date and time for you.

  One of these explanations\fixes help it?

• Copy the FTP files according to date and time

  Hi all

  I'm creating an application where I need to copy the last file created from a remote FTP site only. Thus, for example, if my remote/ftp location contains some folders and some files, it would list only the file that has been changed recently.

  Right now, NLST and LIST of commands give me the complete list of files and folders directly, but I don't need the file that has been recently modified.

  Can someone help me?

  Hello

  Unfortunately the LIST or the commands do not return good usable change dates and times.

  But there is an FTP task 'MDTM' command to get the date of the change of a specified file.

  You must run this command for each file individually.

  You use the FTP functions from the Internet Toolbox? Then you can do it like this:

  

  In the response string, you will get the response code (250 for successful operation) and the date of change.

  I think you need to find the last file with little code on the host based on the modification dates.

  Hope this helps

• Why my computer date and time keep changing to 01/01/2003

  I change the date and time of my lap top, according to the laptop for a while and turn on the date and time continue to change to 01/01/2003. I have not so much time to change, but... his problem keeps up to date of the.

  Looks like your laptop CMOS battery needs to be replaced.  It is not the same battery that powers your laptop.  It is usually a battery of lithium-manganese dioxide of small coin shaped that resemble the shows big battery.  You should consult your instructions of the manufacturer on how to access and what type of battery is needed to replace it.

  A simple call to your computer manufacturer should provide all the necessary information.
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why my computer date and time keep changing at 01/01/2008

  My friend has a computer problem.

  The date of his computer does not change since 01/01/2008, today's date. After the formatting as system, it is facing the same problem. He tried to change the date through the configuration of the BIOS. But after the reboot, the date is still helping 01/01/2008.Please. He got windows 7 ultimate SP1. Thank you for your patience for reading this.

  There is a battery on the motherboard that stores configuration information, including the date and time.  It seems that if this battery should be replaced.  Check motherboard of your friend or the system manual for more details - the battery is usually very inexpensive and easy to replace once found.

• date and time to the 05/12/2013 times randomly changes

  After that I updated to El Capitan (it seems) on my iMac.  My date and time system randomly change the incorrect time and back to 05/12/2013.   I see nothing tripping in particular.  Just all of a sudden my browser does not open a page... etc.   I have open system preferences, click "date and time", click on the padlock to open, enter my password and it immediately changes back up to the exact date and the second that it is free time.  I can't reset it for me.  I tried to leave the bolt open, unchecking the checkbox "do this automatically" & leaving auto.  Can anyone offer any suggestions as to why and how to solve this problem, please?   Thank you

  Please, back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  /Library/LaunchDaemons/com.lsreset.plist

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Move selected item to the trash. You may be prompted for administrator login password. Restart the computer and empty the trash.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• HP 8600 by USING WINDOWS XP PRO - HOW to REMOVE ADMIN BLOCKS ON the CHANGE SETTINGS of DATE and TIME.

  MOST OF MY SETTINGS IS "LOCKED". DO NOT KNOW WHY. HOW CAN I REMOVE THE LOCKS TO ZERO HOUR, DATE, ETC?

  Locking the settings would be monitored through the EWS (built-in web server) to the printer.  The lockout is really designed for printers Officejet to prevent others to perform printer changes that could affect the behavior of the printer.  For example, to keep the date and time the Fax value see him exactly receive time.

  Get the IP address of the printer by pressing the network icon at the top of the screen.

  Enter this IP address into the address bar of a web browser on a computer.  Printer status page should load.  If you receive warnings of certificate, choose the option that allows you to continue anyway.

  Click settings and then go into settings of the administrator on the left.  Many of the features of the façade are ordered here.  Make sure everything is checked except control lock.  Once it is defined, click on apply.

  Power off the printer for at least 1 minute and power then turn it on again to force the new setting to take effect.

  You can also try to set the date and time under preferences on the left of the settings page, but it seems that the problem of locking is more widespread than the date and the hour.

  The Admin settings page should look like this screenshot when it is set up the way it should be.

  

• Why my calendar and time changes each time I have logoff my computer

  Original title: Date/time

  Why my calendar and time changes each time I have logoff my computer? Sometimes, it will change a year totally false and an incorrect time?

  It could be the button for the CMOS battery.

  A low CMOS battery can sometimes various issues, including slow, locking unexplained performance issues as well as others.

  It is quite rare, but the battery is relatively easy to replace, check the manual of your computer/motherboard for replacement details.

  Generally, the battery is a watch battery "CR2032", about the size of a nickel.