Evrytime I connect me, I have to reset my date and time, why?

Similar Questions

• Need to reset the date and time

  My system has decided that it is Jan.4th 2004 and everytime I turn it on, I need to reset the date and time. How can I cure this?

  Packard Bell's Web site does not recognize the 'ALT' CO2 as a model.  Despite this, however, PB seems only to provide a 'generic user guide"which is not described the replacement of the motherboard or the battery at all.  In fact, the only thing he has to say about batteries is be careful how get rid you of them.

  Your computer is a laptop or Desktop/Tower computer?

  If you have a desktop/Tower computer, you can look here--> http://www.uktsupport.co.uk/pb/mb/pbmb.htm and see if you can identify the motherboard used in your computer.

  However, if you have a desktop/Tower computer, the best thing to do is to unplug your computer from the network and, taking the precautions perfectly static electricity, open the box and inspect the motherboard yourself.

  A newish mother on the above site, http://www.uktsupport.co.uk/pb/mb/cosmos.htm, shows the battery on the center line vertical and more to the left.  It's just below the 3 PCI slots.  If you have something like that, a Visual inspection should be enough to see how to remove it.  The type of battery will be engraved on the top of the battery.  In the photo, it looks like a model CR-2032, but there are several models of battery on this size.  Battery CR-2032 (or equivalent) is available in almost every pharmacy chain in the United States as well as online and stores like Radio Shack.

  The page for an old motherboard, http://www.uktsupport.co.uk/pb/mb/450.htm, indicates that the battery is a '3.0V DC Lithium soldered to the motherboard"and if that were the case, it would probably be something that you wouldn't do yourself.  However, this thread is to think that all you have to do for this particular mobo is actually finding the right type of support plug-and - battery.

  If you have a laptop, things can get quite a bit more difficult.  If you can find a different model for your computer name, you may be able to find the manual here--> http://tim.id.au/laptops/packardbell/ , but some of these manuals can not explain clearly how to get to the CMOS battery.

• reset the date and time on Photosmart all-in - One 7510 C311a

  I need to reset the date and time when I send faxes.  These things are wrong on my Fax.  Can you help me find the place to correct the date and time?

  I did not change my system.

  No error message.

  My OS is Snow Leopard 10.6.8

  Hello

  1. On the Control Panel, press the Setup icon ( ), then tap Tools / Preferences.
  2. Tap the Date & time option.
  3. Tap your desired time zone. Set time is displayed.
  4. Press the arrow pointing upwards ( ) or the down arrow ( ) to set the hour and minutes.
  5. Tap AM or PM .
  6. Touch Daylight Saving if you are in a time zone that adjusts for daylight saving time.
  7. Press OK to confirm the time that you set.
  8. Using the numbers on the Control Panel, press the numbers for the current month, day and year and then press OK

• Application of F1 / reset the date and time

  OK could not hang out long so here my problem feel free to move it if you must.

  Hi everyone I'm new here and I'm looking for the answer to what should be a simple question, but I can't find the answer, anywhere, not even after much research on the internet.

  My problem.  I woke up in a constant demand press F1 at the start and I had to constantly reset the date and time. A friend told me that he knew the solution and he replaced the battery Cmos and during one period of time applications of F1 and the need to reset the date and time on start arrested. Then, after a few weeks the F1 ask on startup and delivery to reset the date and time again.

  The situation at the present time, is that I replaced battery comos with the same type and the F1 started queries rearrested again. But once again after a few weeks the demand of the f1 and the need to reset the date and the tooth is distributed.

  I wonder if my friend used the bad battery when he replaced everything first, can someone out there please tell me the correct Cmos battery number and size, I need to motherboard below.

  Acer Apaire E380-CB7L mother board HT 2000 MCP6PM - Re3v:1.0 AM A what is battery correct Cmos?

  I found my answer in a response to another thread. It seems that some how the bad battery had been mounted and in my ignorance of this I still once mounted battery hurt it then compounded the problem further.

  It seems that the CMOS battery on the motherboard usually is a CR 2032 3V , I now nested together for my MB. I'll let you know if it works.

  BTW thanks to the person who advises I took on it.

• OfficeJet Pro 6835: Printer reset the date and time and other actions not initiated

  My printer (Officejet Pro 6835) turns on randomly and want to reset/confirm the date and time settings.  Sometimes even lights up and wants to resume a scan or fax that was never launched.  I want to stop this behavior.

  I didn't want to factory reset and did the thing turned off, etc..  Instead, I went into Setup and turned off the web services 'HP eprint' sign and "HP printable" I was sure that my reset requests were in response to certain functions attached to these.  This seems to have solved my problem.  Please send to HP if you can that their links with the web services are intrusive and therefore undesirable.

  T.

• MSN Money portfolio cannot authenticate me. Tried to reset the date and time, off, connected and turn it back on. Nothing works. Help!

  When I try to go to my portfolio, I get a message box that says they can not "authenticate"me." I've visited the forums and tried everything. Any ideas?

  I'm having the same problem.

• OfficeJet 5745: Reset the date and time on Officejet 5745

  The time on my new Officejet 5745 is 7 hours before the actual time.  How to reset it?

  I touched the date/time display and could enter the erase mode.

• How to reset the date and time

  The year and the time is more correct then faxes be recorded accurately.  How to reset these?  It's my 8600 Officejet Pro.

  Thank you... it was driving me crazy and I couldn't find it on the indices to help HP.

• Date and time keep reseting

  Hello

  El Capitan keeps resetting system date and time to 2013, at least 2 or 3 times a day. It was installed about 4 months ago and the problem has always been here, but only recently has it received so often, that I can't get a good use of my computer.

  It of very frustrating, is there a solution?

  Thank you.

  Try the suggestion of Linc in this topic: date and time to the 05/12/2013 times randomly changes

• given the date and time not set when computer starts. also have a problem with typing

  by turning on my computer, sometimes it lights up at all, and then I try several times so that it lights up. When switching on the main screen, it says error due to the date and time not set and puts my computer starts in safe mode. When I am that I then have to set the date and time again. Why this keep happening?

  on my second question that I have is when I type an email or anything, my writing will just jump on another line and start typing in the middle of other sentences. Why is it jump around like that?

  You may have a failed in your motherboard CMOS battery.

  It's a battery power supply NET, size piece that keeps your system settings when your computer is off.

  They cost about $5 to replace.

  http://www.computerhope.com/issues/ch000239.htm

  How to replace the CMOS battery in the above link info.

  See you soon.

  Mick Murphy - Microsoft partner

• Cellular data opens, but may not use the network have to reset net work every time

  Hello everyone

  My problem is:

  When you use the cell data, after several hours, the net is not available

  I have to reset the network every time

  and this happens every day

  I'm so sad!

  Hello

  If you have not already done so, it can help to upgrade your iPhone to the latest version of the software:

  • Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

  Also, follow the steps detailed here:

  • If you cannot connect to a cellular network or cellular data - Apple Support

• Why my wireless devices now disconnected since I got direct tv installed? I have to reset my router every time that I want to use my network.

  I have a wireless router Netgear #WGR614 with Comcast high speed internet and live tv with connection kit film installed and connected to my wireless network.  Since then, my other wireless devices keep connection loss, then I have to reset my router every time I want to connect to my wireless network.  Please help Direct tv lambasts Comcast and comcast complaint to Netgear.

  I would post on DIRECTV or DBSTalk forums for help as possible...

  http://forums.DIRECTV.com/PE/forums/displaymsgboardlist.jsp?channelId=1&portalPageId=1002

  http://www.dbstalk.com/forumdisplay.php?f=82

• Hi, I have just reset my Firefox and he lost ALL the TABS at the top. Bookmarks, history, leadership, Edit and Options tabs are GONE. I don't know that I named by a r

  Hi, I have just reset my Firefox and he lost ALL the TABS at the top. Bookmarks, history, leadership, Edit and Options tabs are GONE. I don't know that I named all right, but they ARE GONE. Please tell me how to get back them. Thanks, Chris

  _{Edit: removed your email address from the public view, since the only thing that will attract are spambots. you will be notified by email whenever someone replies to the thread, because of a bug in the forum unfortunately with a slight delay. (philipp)}

  The toolbars are still on display in your browser?

  If you still have the address bar, right click on any part that is not a text box or the icon, or if you do not like that of any space right click on the three horizontal lines on the right side of the address bar window. This should show some options, click on 'Menu Bar' and the tabs you are missing should appear.

  As a side note, usually if these options are missing, your icon of firefox in the upper left corner of the window should look different (being a rectangular button itself as opposed to an icon), and the 'file', 'Edition', 'Bookmarks', etc., are found after clicking on this button.

  Hope that helps.

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• Vista-the date and time are reset to dec 2007

  Whenever my computer load now, the date and time are reset to dec 2007 and I continue to have this change manually. I am owner of Acer - windows Vista purchased in 2008. Help, please!

  Hello

  This time is normally caused by a battery CMOS failed in the motherboard.

  Time/date settings are preserved after turning off the power when that battery works

  They are a piece of currency-sized battery and cost about $5 to buy.

  "How to replace the battery CMOS.

  http://www.computerhope.com/issues/ch000239.htm

  See you soon.