Why did not restore my text replacements?

Similar Questions

• After the use of trojan killer mycaptures files did not restore completely mainly the icons in the task bar and the status bar/windows vista

  After run Trojan Killer to clean up my computer after infection the installation "captured files" did not restore my system properly, namely files connected to the bar of tasks IE icons missing also no staus bar

  Hello

  Method 1:

  I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
   
  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Method 2: Run SFC scan.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Run system restore by keeping the computer in the boot.
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting steps, follow step 7 link to return the computer to a Normal startup mode

• I'd like to edit a PDF secure document did not change the text, or the layout at all I would do is highlight the text.  How can I do this?  With the help of Adobe Acrobat DC 15.9.20077.160923

  I'd like to edit a PDF secure document did not change the text, or the layout at all I would do is highlight the text.  How can I do this?  With the help of Adobe Acrobat DC 15.9.20077.160923

  You know the password? Otherwise, the security policy does not allow adding comments in the file, then there is nothing you can do about it.

• Stop computer, Open firefox, did not restore session page

  I just installed something that apparently made Bing my homepage, and I don't have an option to restore session. Earlier, I registered normally, but no page appeared when I opened later. I wonder how to get back my last session at this point. The option 'Restore previous session' did not show up, so now I am just stumped. Does this mean that I will get the restore session if I register normally, because technically, it's not an accident?

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• I opened Firefox accidentally cancel such a rush, but it still opened but did not restore my last session (I needed) and cannot find how to restore - help!

  I opened Firefox accidentally then cancel pressed, thinking that it does not open Firefox if I did it, but it opens it in any case, but does not restore my last session (I needed) and now I can't find how to restore - help!

  This has happened

  Just once or twice

  == I accidentally opened Firefox and clicked on cancel thinking that it does not open Firefox if I did.

  You will find this bookmarking a page (by clicking the star next to the address, or to go in bookmarks > bookmark this page is precisely what we must remember the pages.) This is a feature common in web browsers, and it's very very useful in many situations, including the memory of the location of the pages that you want to see later, allowing access to the pages that you use frequently and other things too.

  If you want to know about session restore, there is a helpful support article here which I think also has information on version 3.0. However, I invite you, once more, update, since older versions (including 3.0) are is more sustained and have known security flaws. In addition, you will not lose any no matter what functionality at all (unless you use modules that are no longer usable by the newer versions, in which case you must contact the authors of Add-ons for support and ask them to update their software), is free and very easy to do.

  If you need other help at all, whatever it is, tips, troubleshooting, step-by-step procedures, feel free to ask here.

• I booked to Windows 10 weeks. Why did not the notification today?

  I have seen that it is today when people began to emerge from their Windows 10 upgrade, and I booked Windows 10 weeks. Why I didn't notice? And the notification will come today?

  With a pool of more than 1 billion devices to upgrade to win 10, only a small part of those who will get win 10 July 29.  First of all, insiders (those who have tested window 10) will from July 29, there are 5 million of insiders.
  After that, in the next weeks and months , Microsoft will upgrade those who have 'reserved' win 10 in the waves. Those who have "reserved" their copies of Windows 10 will announce "once our compatibility work confirms you will have a great experience, and Windows 10 has been downloaded on your system"
  If Microsoft determines that a user system is "not yet ready for your upgrade", the company will provide more details, such as contact information to allow users to get more details from application developers and device manufacturers.
  Every day the implementation, listen us, learn and to update the experience for all users of Windows 10.
  
  
  
  
  If you did not get the update or notification, be patient, the wire of time that you will be some have already begun their downloads in advance
  
  
  http://www.ZDNet.com/article/Microsoft-goes-public-with-more-details-on-its-Windows-10-rollout-plan/
  http://blogs.Windows.com/bloggingwindows/2015/07/02/Windows-10-preparing-to-upgrade-one-billion-devices/

• Why windows backup did not restore all my files?

  He was set to back up all the files (documents, music, photos, etc.), but I restored my latest backup of the system and it seems to have restored some valuable files that I thought it was supposed to be back up.

  Somewhat confusingly, I have a folder containing many shortcuts to some of the files that are apparently not here, but can open the destination via the shortcut folder although it don't or unable to display the folder in Windows Explorer.

  Any help to work out what is going on would be greatly appreciated!
  Matt.

  Display the hidden files and folders. If no go, sfc scan. They should bail out you.

• Except repeating on Palm TX and excessive writing did not restore lost all calendar entries

  I turned on my Palm TX today entered a new entry on the calendar... the Palm back on without apparent reason.

  I went back to the calendar function and tried. This time, when one has chosen a NEW date and listed at once,

  When I got home on the date he had NO entries in the calendar on my Palm TX except repeat entries.

  I tried a soft reset... still no calendar entry at all, not any day, any time. I have a backup on my computer, and

  you use hotsync only calendar to replace the value of the computer for Palm TX, I did a hot sync. Everything is always present on my

  computer, but nothing has replaced on my Palm TX. Any quick suggestions? Seems to me that something is damaged

  in the calendar function, but I don't know what to do.

  OK, thanks for the update.

  Corruption problems may get involved instead. I thought that by fixing corruption, with DBFixit, TX and sync'ing and then with Pocket changes desktop should have corrected the problem. This procedure is usually solves the problem with corruption and sync'ing not categories PIM.

  Message relates to: Palm i705

• My macbook froze and I had to turn it off. When restarting and opening ff, ff did not restore the previous session and I lost all the tabs.

  There is no trace of the previous session, to the title of the menu bar. I know it's common, I hope someone has a new response.
  Thank you

  The xtra74pv.default file is the Firefox profile folder, if the file is in the right place and needed to be moved.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  If you have an older version of the sessionstore.js file from before the crash then you need to replace the current sessionstore.js with the old copy to see if brings back the lost tabs.

  • http://KB.mozillazine.org/Session_Restore

• Swap image restore does not restore all images

  I have implemented a simple bearing which permutes the two different images, following the instructions provided by Adobe. If I roll over an image, it replaces this image and a different image. This part works fine. But when I roll off the coast of the image, it restores only one that I have switched to the original, but not the secondary image. Here's the relevant code:

  ##THIS CODE IS GENERATED BYDREAMWEAVER, I HAVE NOT MODIFIED

  < script type = "text/javascript" >

  function MM_swapImgRestore() //v3.0 {}

  var i, x = offline. MM_sr; for (i = 0; a & & I <.) Length & & (x = a [i]) & & x.oSrc; i ++) x.src = x.oSrc;

  }

  function MM_preloadImages() {//v3.0

  var d = document; If (d.images) {if(!d.MM_p) d.MM_p = new Array();

  var i, j is d.MM_p.length, a = MM_preloadImages.arguments; for (i = 0; i <.) Length; i ++)

  If (a [i].indexOf("#")! = 0) {d.MM_p [j] = new Image; d.MM_p [j ++] .src = a [i] ;}}

  }

  function MM_findObj (n, d) {//v4.01

  var p, i, x;  if(!d) d = document; If ((p = n.IndexOf ("?")) > 0 & & parent.frames.length) {}

  d = parent.frames [n.Substring(p+1)] .document; n = n.Substring (0, p) ;}

  If (!) () x = d [n]) & & copyrights) x = d.all [n]; for (i = 0;! x & & i < d.forms.length; i ++) x = d.forms [i] [n];

  for (i = 0;! x & & d.layers & & I < d.layers.length; i ++) x = MM_findObj (n, d.layers [i] .document);

  If (! x & & d.getElementById) x = d.getElementById (n); Return x;

  }

  function MM_swapImage() {//v3.0

  var i, j = 0, x, a = MM_swapImage.arguments; document. MM_sr = new Array; for (i = 0; i <(a.length-2); I += 3).

  If ((x = MM_findObj (a [i]))! = null) {document. MM_sr [j ++] = x; if(!x.oSrc) x.oSrc = x.src; x.SRC = a [i + 2] ;}

  }

  < /script >

  and...

  "< a href ="aboutus.html"MM_swapImgRestore" onmouseover ="MM_swapImage ('aboutus'", ' images/aboutus2.png', 1) "> < img src =" images/buttons_06.png "alt ="About Us"name ="aboutus"width ="67"height ="26"border ="0"id ="aboutus"onmouseover =" MM_swapImage ('text', ", ' images/text2.png', 1) ' MM_swapImgRestore" / > < /a > "

  It restores aboutus very well, but he's not restore the text.

  Any help would be appreciated!

  I'm assuming that you would have affected the behaviors to swap an Image twice - once for the on the image to change and the second time to change the image of the top. This makes DW create 2 instances of mouseover and mouseout/mouseouthandler() code code is replaced by the 2nd change to your Swap Image.

  The ideal way to do is to select your image of trigger that you want to activate SwapImage. Add the behavior > Swap Image > choose first a source of swap for 'about '. Still haven't click OK. Choose your 2nd image you want to edit - text, in our case. Select a swap for this source as well. Make sure preload images and restore on mouseout/mouseouthandler() are checked. Now, click OK.

  Your task must be completed.

  I downloaded the correct version to the http://www.forwardfocus.in/sandbox/testmouseover for you to see.

  One other quick thing, I wanted to tell you: I see that you used full slices to make your site. It is generally bad practices. Try not to cut your site completely, directly from Photoshop. Define your CSS and use HTML with individual items to complete your site.

• HP 3050 printer prints not clearly even after replacing the color and black cartridges...

  I have a problem on a HP 3050 printer all-in-one that is just a year old.  The printer is not used for several months and it was working properly before.  I tried to print a page and had missing horizontal print, I tried to clean the print heads and it did not help.  I replaced the cartridges with new ones and noticed that the ink levels showed that had the old cartridges.  Black was half full and the color was full.  It wasn't new purchased in-store cartridges refills.

  I tried to force an alignment page on the maintenance of the printer screen and this failed repeatedly, undetected alignment page.  I did some research and even tried to clean links them / connectors than cartridges fits.  Looks like that leaving the cartridges for several months in the printer was bad and that I'll need to ge a new printer.

  Thanks for the tips,

  plarr

  document here can help to solve the problems of print quality in your Deskjet 3050 has. I also suggest to clean the cartridge and printer electrical contacts as described in this document (for another series of cartridges, but same principle).

• BBM contacts do not restore my iPhone BBM

  Hello

  I'll have my BBM installed in my 9780 and had now installed BBM on my iPhone also with same BBID. It installed and everything works well except that it did not restore my existing contacts. I read that if we use the same BBID to connect, it will restore contacts happened to me. Is it possible to back up and restore? Can someone please help?

  Concerning

  VK

  It worked after BBM updated to the latest version on the 9780.

  Thanks for your help and advice.

• When I text on my Mac, why did he not appear on my iPhone?

  When I text on my Mac, why did he not appear on my iPhone?

  Have you followed these steps to implement continuity?

  Set up SMS and MMS with continuity

  1. You need to iOS 8 or later version on your device iOS and OS X Yosemite or later version on your Mac.
  2. Connect to the iMessage with the same Apple ID on your iPhone, your other iOS devicesand your Mac.
  3. On your iPhone, go to settings > Messages > sending & reception. Add a control to both your phone number and email address. Then go to settings > Messages > text Message Forwarding and activate the device or devices that you want to transfer the messages.
  4. Looking for a code on the Mac, iPad, or iPod touch that you enabled. Then enter this code to check on your iPhone.

  Make sure that your email address is checked everywhere.

• Why my phone was telling me my copy of windows and not authentic after two years? I tried a system restore but it did not help

  Why my phone was telling me my copy of windows and not authentic after two years?

  I tried a system restore but it did not help

  Hello

  1. Windows you receive not genuine error?
  2. Did you do any software or hardware changes on your computer before the show?
   
  Follow the below mentioned article:
  Genuine Windows: Frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows/help/genuine/FAQ

• Why the system restore did not finish successfully

  System Restore will not work. Always get the message saying unspecified error meant the restore has failed. Tried Safe Mode, but still did not.

  System Restore will not work. Always get the message saying unspecified error meant the restore has failed. Tried Safe Mode, but still did not.

  Make a check of the system files. It is to look at the fields corrupted, and he will try to fix it if it is found.

  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html