Scanner on a network on XP

Similar Questions

• Trying to access a scanner on the network

  I have a wireless set up at home and shared the printer/scanner already. I can find it & print it from any computer on the network. However only the computer, it is physically connected to will allow me to scan anything. Is there anything further needed to be able to scan as well an impression on the network?

  Hi Mr. Rick Kelley.

  Please see the following article with useful information about your question:

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Malware scanner vs IPS network

  Hello

  I confused these days about the difference between network malware scanner and IP addresses.

  For example - Cisco has no built-in malware scanner in him will END, but some sellers have. What is the purpose of having at the same time the IPS and malware? The only thing I can think of is to malware scanners may fix infected files (e.g. IronPort ESA) and IPS directly falls traffic.

  An IPS scans the packages while a malware scanner scans the files. The Cisco IPS, you can configure in a promiscuous or inline modes. In inline mode, the IPS can identify and remove malicious packets before they were unleashed on the network. "Promiscuous", a copy of each packet is sent to the IPS mode and dangerous packages are identified after arrival at destination. This means viruses, malware, etc. can potentially be activated on the network.

  The network analysis anti-malware already installed malware scanner. For example, if a new flavor of malware is sent as an attachment to an email address on your network, IP addresses will not pick up it because it doesn't have a signature for her. If the attachment is opened, it has triggered. If you have regular scans with your network malware scanner, it's something that it will pick up.

  Jason

• ScanJet N6350 - cannot detect the scanner on our internal network.

  Afternoon,

  Product details:

  ScanJet N6350

  Operating system: Windows XP

  Error: Could not find the network N6350 scanner when you use the HP software.

  Changes: There has been no change to my system.

  Hope someone can help me with this:

  I am trying to add my scanjet N6350 to our corporate network, I have assigned to the internal Ip address bad ETC. and can travel to the scanner internally.

  However, once the installation of the HP software to connect the scanner to my machine, cannot find the scanner on the network.

  Thank - you

  Well, it turns out that:

  Even if it wasn't the error is displayed when you try to connect the scanner, it turns out to be the solution to the problem and I am now able to Scan over the network.

  Before installing the Scanner, follow these steps on the local computer.

  1. Please click Start and select Control Panel.

  2. Click on system and select the Hardware tab.

  3. Click the driver signing, you will be directed to the driver signing options window.

  4. In the window the driver signing options, select the ignore - install the software when even and don't ask for my approval, make this action the system default and click OK.

   

  After these changes, if necessary, reboot the computer so that the changes will take effect, and then try to re - install the scanner software.

• When using windows scan & fax tool I get: _ 'network processing timed out. Check the scanner settings & network"error

  I am running Vista ultimate on 64-bit computer with a Linksys WRT310n router in LAN mode. I also have a Canon MF4370dn printer that prints screen & documents ok. I can see the printer on the network.

  I'm mainly interested in the function of scan here.
  With the mf scanner set to scan mode of network (according to Canon), I opened the Windows scan & fax tool, I select the WIA Canon scangear printer/scanner/fax to network & I get a panel where you select dpi/jpeg/bmp etc. When I select the function preview or scan I get an error message that says "network timed out treatment. Check the settings of the scanner & network.

  I read a lot of sour comments on the analysis of the network of this machine. It's a shame, because it is a machine of great, fast & compact mono laser. I have disabled the firewall of the router, still no go. I also tried the rout USB with software to reinstall with network for others, printing & for my machine but italways deferred to the network on mine with the same error message.

  I also read where it analyzes only at 300 dpi... so with all these pros & cons I decided to get a good, dedicated, scan that will probably better results of the scanner anyway.

  Thank you for all the good sites & info you have provided.

  Newbie.

• Photosmart C4680: Photosmart C4680 on homegroup printer-considered, but not scanner

  My home network includes a Dell XPS-18 running Windows 8.1 Pro and a Toshiba Satellite running Windows 7 Home.  Our Photosmart C4680 is connected to the Toshiba by USB.  It is shared and is available on the network.  It is used by the XPS for printing and never a problem as long as the Toshiba's online.

  However, I can't find a scanner.  I used it for printing without having to install any software.  When I couldn't find as a scanner, I have installed on the XPS, the HP software suite which is available for download from the HP site, in the hope, there was a special driver for scanning, which would be added.  But that does not change.

  The Toshiba can scan from the C4680.  And I can connect to the XPS via USB and also find a scanner by, for example, opening Paint.net and go to "file |" Acquire | From a scanner or camera.  But when the printer is shared via network it is not considered a scanner on the XPS, although I can print to it.

  How can I use it as a scanner on the network?

  Hello

  MS Windows alow God a printer or files and folders, there are not any sharing scanner capabilities.

  Scanning can only be done from the PC that have plugged USB cable, to scan multiple computers, you will need a network connected device, it can be done with a USB device.

  Kind regards

  Shlomi

• Network scanning multi-page Officejet Pro 8500 a w/o ADF (Vista and HP Print software)

  Without using the ADF on the 8500 has, can I scan multiple pages in a PDF file if the scans are done from the PC? How?

  My version of Vista is 6.0.6002 Service Pack 2 Build 6002.

  My HP Officejet Pro 8500 has e-all-in-one printer - A910a is the standard model, for example, the premium product of mid-range. It is connected by LAN cable. It scans, prints and can provide the status of ink level.

  The 8500 is connected via the network, and on a Vista PC, I use a desktop icon to launch "HP Officejet Pro 8500 A910.exe". The new software is very different from the [Photosmart c6150 dead] [uninstalled] old HP Solution Center, and I looked in the new textbooks at least briefly, so I hope someone can same thing me some time with a basic question/issues scan. My research forum has failed, but if someone has a link to a relevant thread, that would be appreciated.

  Without using the ADF on the 8500 has, can I scan multiple pages in a PDF file if the scans are done from the PC? How?

  I also tried scanning browser based and there is a drop down for sweeping on both sides, but the drop down menu is not activated and cannot be used.

  I only went through the configuration of the network folder, which may be necessary to get the ability I want. On this subject, I wonder if I set up a folder for all users, or just for my login.

  Thanks for any help!

  Success?

  Well, I created a folder network and was then able to scan to a PDF file of several page without using the ADF (ADF) documents.  To do this, (1) install the software provided with the Officeject Pro 8500 has, (2) the installation program a network folderand (3) run the scan of the touch screen located on the Officejet Pro 8500 has.

  (1) install the software supplied on CD (or probably downloaded from somewhere near here). You may be able to work with only the web browser interface, but I wasn't before install the software provided on the CD, and I suspect that some software is required on the PC.

  Install the downloaded software or the software provided on the CD-ROM titled

  HP OFFICEJET PRO 8500

  A910

  (2) Setup a network folder. The installation of the software created a few new icons on my Vista PC.  Double-click the icon of the desktop titled "HP Officejet Pro 8500 A910". On my Vista PC, it runs,

  "C:\Program HP HP Officejet Pro 8500 Officejet Pro 8500 A910.exe A910\Bin\HP"

  An application window should appear. Mine has a title, "HP Officejet Pro 8500 A910 (network).

  The application window has a section of Scanner Applications on the left. From there, the scanner to the network folder Wizard. Which can be done by double clicking on the 'scan to network folder Wizard"or by the first double clicking on"Scanner Actions"and on the screen that appears, click on"Scan to network folder Wizard.  Otherwise, you can get this done through the web browser, if you know the URL for your device's built-in web server. Because I use my DHCP router (to allocate IP addresses in my local network), I currently access the 8500 a of http://192.168.1.19/. From there on, I can access the Scan tab, and I can access the ability to "Setting up the network folder" on the left.

  Using the scan to network folder Wizard, I clicked on New and used the Browse button to select "C:\Users\Gordon\Documents\My Scans" to set up a folder named "Gandalf Gordon". The next page of the wizard, it will take your network password (or local password if he is counting on the local PC) required to access the PC where the path "C:\". "sailed above is located. When I clicked on finish, the wizard opens a web browser which indicated a certificate error. I chose to continue to the site, which turns out to be the web server integrated in the 8500 has. So now you know a URL where your built-in web server on your network if you were already uncertain. If you do this URL a favorite browser, the favorite should work even if the IP address of the 8500 a is changed in the future.

  Display (3) initiated a sweep of the touchscreen located on the Officejet Pro 8500 a. tap the icon "Scan." Tap the 'network '. Select the network folder. Place a page to scan on the glass of the scanner without using the automatic document feeder. Press 'Start Scan '. When the touch screen prompts, "Page another Scan", select 'Yes', place another page on the scanner glass and click, 'Start scan '. When the last page is analyzed, answer 'No' to the prompt "scan another Page.

  Note: When loading pages additional manually, you have to work a little faster or unit will then expire and close the file with as many pages that you managed to scan. I did three pages as a test.

  If there's a better solution out there, please share!

• setting up scan to network in a Mac environment

  Our office is based Mac and we use a Canon Image Runner 2535i as our scanner and a network printer.  It works very much like our network printer, but we don't get anything from the scanner.  We connected via an ethernet cable.  We lack of OS X Lion. 10.7

  Anyone have experience with this and could lead you throug setting this up?

  I discovered that the runner ir2535 CanonImage will not scan for Mac OS10.7 and later versions.  It is not for lack of Cannon, but when put Mac updated to 10.7 Lion, they changed something that has disabled the scan on this machine.

• 8 Win scanner without current driver

  I need to know if there is some way that RemoteScan can help me get around the following situation:

  I have a 10 year old well maintained and running RICOH is200e scanner network which is part of my network. The two courses Win 7 32-bit workstations work very well with it. I use it mainly for a TRA (AllMeds) and PaperPort. I have acquired a new office which is Win 8.1 64-bit. As RICOH came out the biz to scan several years ago, that there is no 64-bit drivers. I intend to run PaperPort on the new desktop 8.1 Win and want to use my RICOH scanner in a network. Is it possible that your software can help me get around the lack of a 64-bit driver?

  Thank you

  As long as the scanner network works with your existing Win7 machines (and they use a TWAIN or WIA network driver for the scanner, requiring RemoteScan function) and all these machines are on the same physical network, then you should be able to use RemoteScan to LAN. In this case, you could share on the Scanner one of the Win7 machines and Win8 machine would act as the client computer to receive the scan.

• Windows 8 does not recognize the scanner

  I have two printers on network, a brother MFC9840CDW and a HP Photosmart Premium C410.  Both are multifunction devices and both are recognized by Windows 8 as Printers , but not the scanner. I uninstalled the drivers for the HP and reinstalled the but the scanner is still not recognized.  I can't reinstall the Brother drivers because the brother website says it uses the native player of Windows 8 and therefore does not download.  I have tried both Photoshop and Adobe Acrobat Pro to address scanners and neither of then is recognized by both programs.  Using Windows 7 machines on the same network, however, both are recognized as scanners, so clearly, it's a matter of Windows 8.  In addition, HP and brother have Windows 8 'apps', HP Scan and Capture and Brother Print and Scan, respectively.  The fact HP application recognize the scanner HP; application of brother do not recognize the scanner Brother.  I'm confused and need help!

  Don't forget to directly connect the scanner to the computer of victory 8 to test scan. Scanner-printers on network that are connected to another computer on the network can share the printer but not sharing the scanner. Scanners should be connected directly and use the software on a computer to scan. The exception is a network Wireless scanner-printer connected to the network router.

  Your printer HP scanner will scan with windows 8 if it is attached to the computer in windows 8, since the drivers are available HERE Connect that one to the computer that you use most for scanning and sharing the printer with other computers. And the Brother machine is also compatible with the drivers from This SITE , it is also presented as a printer scanner wireless network that you can connect to your router and share it on the network. Get directions to connect to the router of brother.

• MF1522 MFP - software detects no network device

  Hello

  I tried HP support and they have no phone, so I thought I would try here.

  We have a HP MF1522 MFP that has worked very well as the printer since we had it - of course I originally installed it the old-fashioned way (do not use the HP software).

  However, when you try to install it via the HP software it fails to detect the network printer (although I can connect to its IP address without problem, or print over the network as well).  This means that I can not use the feature that is what I am network analysis is after.

  Apart from the connection to a computer via the port USB so that she can use the scanner, does anyone know if theres a way to "fix" the HP configuration utility so that it can detect the scanner on the network?

  Firewall is turned off.  Setting the field. Tried on Windows XP Pro and 7 Enterprise.

  Thanks for any help!

  Try running this utility.

• Scan cannot access a shared folder on 10.11.5

  I shared a folder on OSX 10.11.5.  The permissions are correct.  I can access the share from a Windows machine (he asks credentials and is REALLY slow to display files), but when I try to scan a document to sharing it errors every time.  It worked until recently.  I'm 100% sure that the credentials on the scanner are correct.

  Just so there is no confusion I created an account on my scanner on a network (which is on the same subnet) with the same references as those of a user on the OSX machine.  The sharing is visible and accessible in writing from a Windows machine.  When I scan from the scanner (A Konika Minolta Bizhub) it says "error: unable to connect to the server."  This isn't a matter of connection/permissions because when I change the credentials, I get a different error message.

  Any ideas?

  So you're probably aware that Apple has changed the version of SMB used 10.7 and later and as a result many multifunctional no longer able to scan to a share on the Mac via SMB. I know that KM has released a fix for some of their machines that made this work again. Since you mention work recently, I assumed that it was a Mac OS x 10.11.x. Is this correct?

  If Yes, then on the KM, you can navigate to sharing Mac instead of using the address book entry? If you can, and then using this function, you should see the Mac and when you select it, you should get a prompt to authenticate. If you specify the account name on the Mac, that needs to be enabled via system preferences > sharing > file sharing > Options > Windows, then the password file sharing, is the shared folder appears? You get an error at this stage, or when you first select the Mac?

• OfficeJet 6500 E709n series: analyse problems in the center of HP solutions and external application (Twain) since winning 10 year anniversary

  I use my all-in-one printer in a network.

  Scan with "ScanToPDF" wich is a solution of Twain.

  Since the aniversy win 10 updated

  -cannot use more ScanToPDF

  -scan with scanner HP Solution gives the same error:
  (Dutch)  Scan kan niet worden uitgevoerd omdat het HP-beeldbewerkingsappraat zich in een network is en wordt door een ander used programma of een andere computer. Try het later opnieuw.

  (translated) Cannot scan as scanner HP of network and is used another computer bij.

  Try again later. 8, [(0.18,-2147467259)]

  tried to fix it by manually forcing Windows updated my drivers (officejet 6500 E709n series). The driver was updated, but no result.

  Scanning with Windows fax and scan (do not use Twain AFAIK) works fine, but produces no PDF.

  Help!

  Hello @Jörg63, hope you are well!

  Welcome to the HP Forum! It is a wonderful location to converse with the community, get help and advice.

  I understand that you are having problems after update to Win 10 of scanning to PDF. I would like to help.

  I'm afraid that HP Solution center may not work in the Windows 10 environment due to some compatibility problems.

  I suggest that you use HP Scan and capture request instead. Capture and scanning HP is a simple application that captures photos or documents to your computer's built-in camera or scanning HP device.  These images can be previewed, edited, saved, and shared to other applications as well.

  Go to http://hp.care/2bUVkrw to download and install the windows scanning and Capture app.

  Please let me know if that solves the problem, or if you need assistance

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• HP laserjet pro m125nw mfp: HP laserjet pro failed installation of m125nw mfp printer

  Hello

  My printer HP laserjet mfp m125nw installation pro is constaintly default. It is 99% (very slow) and ends with a "fatal error". The message is (in Dutch) "of uitvoering van installatiebewerking of easy lang said. you is a fatal care Kon het product niet kan worden used. Start computer opnieuw op... "etc".

  (I'm using the latest version of the driver / full solution: "LJPro_MFP_M125-126_full_solution_15188")

  When you check the logs, I get:

  [23:00:08.2878 2016-05-14] - error - ThreadTimeOut: USBConnectEngine.AbortThreadOnTimeout)
  [23:02:03.4636 2016-05-14] - Info - InstallStatus = FinishedFailError

  Please provide suggestions as how to solve this problem.

  Kind regards

  Jim.

  Hello

  I tried the steps you suggested. However, I was unable to find a node «HP Universal printing...» "in the device manager (I've expanded all nodes).

  And Yes, I'm logged on as administrator.

  Because newspapers suggest that it was a usb problem, I plugged the scanner via wireless network. This solved the installation problem and I can reuse my hp for printing and scanning (via radio).

• HPSLPSVC service does not not on my PC. Solution Center and C309g show buttons do not work

  This worked for a few days and 2 calls with technical support...  Pending their next call and thought to try the Forum.  Seen many old messages on this task using a lot of CPU, but it's 2008 and 2007.

  What WORKS:
  -printer is on the network to the address 192.168.15.254
  -I can print to it
  -I can access the printer with the browser support page and the IP address above
  -I can see the printer and print using my HP iPhone application
  -I can scan by using a shortcut on the desktop and the program HP (and paint) in the DIM folder
  -I can copy using a shortcut on the desktop and the program of HP in the DIM folder

  What does not WORK:
  -HP Solution Center does not; Gets the error saying install is not complete
  -Ditto for the launch of the digital imaging of the solution center monitor
  -Installation of network device gets an error "Task does not exist" when installing.  Also got "task not found."
  In some troubleshooting I identified this task - HPSLPSVC - such as not found NOT *.
  This seems to be an HP device/network discovery support service *.

  -The button of SCAN to PC on the C309g display says "Try startinf scan of the computer.
  -HP diagnostic Scanner (HPSDU) indicates network problem
  -HP Printer software Diasgnostic does not show the printer on the network, but it is
  clearly there that the printer does not work
  -A USB installation HANGS and eventually times out in peripheral step 'configuting '.  No other reason
  that shows timeout.  Manager tasks indicates no. e/s or CPU to the task or the service (s) after a short period.

  Among what has been done so far, because I bought the printer Thursday:
  -dozens of software installs / uninstalls with ZoneAlarm and defender completely market
  -A level 3 driver, uninstall and reinstall
  -Uninstalls the success of all the previous HP software.
  -ZoneAlarm settings to open ports and which tasks are in place, such as documented.
  I am running version 9 +. the docs to install Version 8 reference parameters.
  ZoneAlarm has been OFF during installation with the same result.

  Note:

  services.MSC does not show this task running
  I can find the HPSLPSVC32.dll task in the digital imaging bin directory.
  There is a bit of CLSID, firewall name and rule for HPSLPSVC and HPSLPSVC32 registry entries
  If this task is supposed to be running, there's nothing that appears to start, as for example the task CUE.

  Any help is appreciated.  Can this service be started manually or otherwise if it's supposed to be here?

  Found an article on the forum for a similar with XP and C4580 problem after I posted the problem.  Do you have a regsvr32 HPSLPSVC32.dll since the 'bin' directory and restarted as suggested in this announcement.

  Service now shows.

  'Install' for my printer suddenly restarted automatically, and all finished.

  Printer display the buttons work.

  Solution Center works.

  CPU seems normal.

  All right.

  Bravo added another display.