Why didn't my apple remote causing interference with my other apple products?

Similar Questions

• synchronization settings iCloud causes interference with synchronization server

  Specification of the server:

  Mac Mini server (MacMini5, 3)

  10.10.5 OSX

  Server 5.0.15

  I had a very big problem with the synchronization settings iCloud interfering with my server synchronization. I'm in an office of 29 BYO Apple laptops in my Mac server. We have worked with this setup for years. We moved recently to Exchange for our mail server so I added all the Exchange profile to the Profile Manager and added the name of the account with '[Exchange]' so that they don't get confused that we were still in the process of migrating emails. A few weeks later, I decided to change that and has deleted this text as we did with the migration and the clarification was not necessary. I made sure to go to the computer of everyone and they don't de-s' register and re-register (I know that's not necessary but to keep the long story short, I leave the superfluous details). Most of the time, everything works fine. However, sometimes a system will just stop with the synchronization server profiles. When I go in the system of this person, I'll see what the email account with Annex [Exchange] is back. Because the connection account information are exactly the same, it prevents the server anything inside this synchronization profile. My only assumption is that the re-emergence of this story comes from the iCloud synchronization. I'm sure that because if I UN - enroll in this system, all the accounts given by the server disappear, leaving just one account. So, I delete and re-register this system and everything goes back to work normally.

  I hope that all made sense. It basically happens to everyone eventually, and sometimes repeat users. I can't ask my users to stop using iCloud because they use it for a lot of personal things, but this is starting to become quite annoying. Everyone has this or a similar issue or know a fix?

  You have to disable iCloud keychain to stop synchronizing email accounts.

• Why didn't I go and turn my Airport Time Capsule to be able to backup?

  Hello.

  Why didn't I go and turn my Airport Time Capsule to be able to backup? It has been like this from day one. At the point where I keep my iMac off for a few days, my Time Capsule airport must be enabled and the new in order to save. Any suggestions?

  Concerning

  Simon

  Hello Ladro Maltese,

  Thank you for using communities of Apple Support.

  If I understand your message when you shut down your iMac a few days and then go back on you have to turn off your Time Capsule, then on again as well. I know how it is important for you to be able to have your Time Capsule works well. The first step that I recommend is to make sure that your Time Capsule firmware is up to date.

  This article includes information about how to manually and automatically check updates the firmware for your Time Capsule:

  Keep your base station to day.

  After updating the firmware see if the problem persists.

  Best regards

• Why would I use apple pay on my actual card?

  Why would I use apple pay on my actual card? Why put another man in the middle. It is easier to pull out my card that he must get out of my phone. What are the real benefits? I can understand if you have an Apple Watch. But otherwise what's the point?

  Hello

  You will discover the features and benefits of Apple pay here:

  http://www.Apple.com/Apple-pay/

• Why do both my Apple TV appear in iTunes preferences MAC

  I have a 3rd generation Apple TV in my family room. and a 4th generation Apple TV in the games room.  They have separate names. The 3rd generation Apple TV shows only in iTunes preferences on my Mac.  However, if I play music on my MAC, and I want to use multiple speakers Apple TV display and I can listen to music on two of them.  I wonder why my 4th generation Apple TV doesn't appear in iTunes preferences on my MAC?

  My MAC running OS X El Capitan, V 10.11.5; two software Apple TV is updated.

  4th gen ATV does not appear as a device in iTunes. That is how it is designed.

• Bought a used iPhone 4S about six months ago. Not configured for all files huuuuge icloud. Only mail (which I cut on a regular basis), but no pictures. Why do I get the message that my storage is full? Why do I pay Apple for storage?

  I bought a used iPhone 4S about six months ago. Got an AT & T plan with data. Not upgrade to iOS 9.3 I read that it wasn't a good idea for older phones. Implement iCloud for ONLY mail and SMS. No pictures. I have cut my weekly mail.

  Now, I get a notice that iCloud is already full, and I have to pay for more storage. Why? There is nothing on the phone! I also have an iPad3 and a banal ASUS PC, which is where I store my photos and my photos. How would you complete the storage? Why do I pay Apple more money? They do not have enough?

  Go to settings/general/storage and use iCloud. Click on storage management in the ICLOUD section. It will tell you exactly how your iCloud-storage space is affected.

• Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  What exact model of AirPort Extreme do you have? Either have your tablet or laptop Win7 been updated recently? They were both able to connect before and not now OR they were never able to connect? Can the laptop Win7 access Internet when connected by Ethernet? One of these devices have problems connecting to other networks Wi - Fi?

• Satellite Pro A100 plugged in causes interference on my monitor

  A100 plugged it causes interference on my monitor. VGA and inlet supply located close together but this should not be an excuse. Any ideas please?

  Post edited by: bitnutty

  Hello

  What exactly do you mean by interference on my monitor? Do you have the quality bad picture or what?

  Another question; This interference appears on the internal laptop LCD display or the external monitor?

  Have you tried updating the graphics card driver and/or BIOS?

• IM on the monthly clowd why didn't the new filter oil painting

  IM on the monthly cloud why didn't the new filter oil painting and how do I get it? Thank you

  Menu Filter > esthetics > oil painting

  If it has dimmed to read this: oil paint is gray

• Why didn't - not my words of menus that begins with a big letter?

  Why didn't - not my words of menus that begins with a big letter? Some of them is very good, but 2 of them won't change, no matter what I do. (I apologize for my bad English, I hope that makes sense (btw. my Web page is in Danish))

  

  Link to the problem

  Maybe the font you use has no good capital o., otherwise this could be a CSS text transformation, in order to check the settings for the layout.

  Mylenium

• Why didn't show in my creative cloud app window?

  Why didn't show in my creative cloud app window?

  Chelseaf34629241 did you use the steps listed in App does not open. Wheel of progress constantly calls to solve common mistake?  If so, what version of the creative Cloud Desktop application you have installed?  Also, what operating system are you using?

• iPad safari crash, reboot back to the home page of safari. Has begun to do this with 8.1 update and never stopped. I hope that new updates should solve this problem, but they did not. I will not buy an Apple product once again.

  MY iPad hangs on web pages to the home page of Safari. Started to do this with the 8.0 update way back. I kept hoping that each new update which would stop, but it's not. I is very annoying! According to me, I don't want another Apple product. I've seen other messages on this same thing and some answers say to hold the home button and button simultaneously until iPad goes out but this is not enough. Apple does not seem to care to fix it after all these months.

  If you think that every iPad 2 does that and ignored, Apple?

  You realize that it could be a website that you visit that could cause this? Or an application that you have. What did Apple say when contacts you to this topic? What else did you do besides a reset?

• Common problem with Windows 7, what causes errors with itunes, the software adobe reader, TurboTax 12

  Is there a common problem with Windows 7, what causes errors with itunes, the software adobe reader, TurboTax 12?  I get error messages when I try to use one of these programs

  Hello

  Thanks for the reply with the details.
   
  Problem with opening PDF documents, please see the link and follow the steps in the article:
   
  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244#top
  Important: Disable your antivirus or changed settings can make your PC vulnerable to viral, fraudulent, or malicious attacks. Microsoft does not recommend that you disable your antivirus software or change settings. If you need to temporarily disable your anti-virus software, you should reactivate as soon as you are finished.
   
  See the link for the question with idevices:
   
  iTunes for Windows: "Could not load the data class" or "Cannot load provider data" alert synchronization services
  http://support.Apple.com/kb/TS2690
   
  Problem with TurboTax 12, check out the links and follow the steps:
  http://TurboTax.Intuit.com/support/IQ/install-product/reinstalling-the--NET-Framework/GEN12673.html
   
  5639 error: Cannot configure the product update system
  http://TurboTax.Intuit.com/support/IQ/update-product/error-5639--can-t-configure-product-update-system/SLN12386.html
   
  http://TurboTax.Intuit.com/support/IQ/install-product/Troubleshoot-installing-and-running-TurboTax--Windows-/SLN63018.html
   
  If the troubleshooting steps above do not help, check in a new user account:
  Reference:
  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account
   
  If it works in the new user account, then the current may be corrupt user account.
  To fix the damaged user account, follow the steps in the following article:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Remote access VPN with ASA 5510 by using the DHCP server

  Hello

  Can someone please share your knowledge to help me find out why I'm not able to receive an IP address on the remote access VPN connection so that I can get an IP local pool DHCP?

  I'm trying to set up remote access VPN with ASA 5510. It works with dhcp local pool but does not seem to work when I tried to use an existing DHCP server. It is tested in an internal network as follows:

  !

  ASA Version 8.2 (5)

  !

  interface Ethernet0/1

  nameif inside

  security-level 100

  IP 10.6.0.12 255.255.254.0

  !

  IP local pool testpool 10.6.240.150 - 10.6.240.159 a mask of 255.255.248.0. (worked with it)

  !

  Route inside 0.0.0.0 0.0.0.0 10.6.0.1 1

  !

  Crypto ipsec transform-set esp-3des esp-md5-hmac FirstSet

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  Crypto-map dynamic dyn1 1jeu transform-set FirstSet

  dynamic mymap 1 dyn1 ipsec-isakmp crypto map

  mymap map crypto inside interface

  crypto ISAKMP allow inside

  crypto ISAKMP policy 1

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 43200

  !

  VPN-addr-assign aaa

  VPN-addr-assign dhcp

  !

  internal group testgroup strategy

  testgroup group policy attributes

  DHCP-network-scope 10.6.192.1

  enable IPSec-udp

  IPSec-udp-port 10000

  !

  username testlay password * encrypted

  !

  tunnel-group testgroup type remote access

  tunnel-group testgroup General attributes

  strategy-group-by default testgroup

  DHCP-server 10.6.20.3

  testgroup group tunnel ipsec-attributes

  pre-shared key *.

  !

  I got following output when I test connect to the ASA with Cisco VPN client 5.0

  Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: (4) SA (1) + KE + NUNCIO (10) + ID (5), HDR + VENDO

  4024 bytesR copied in 3,41 0 seconds (1341 by(tes/sec) 13) of the SELLER (13) seller (13) + the SELLER (13), as well as the SELLER (13) ++ (0) NONE total length: 853

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, SA payload processing

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ke payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ISA_KE

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, nonce payload processing

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received xauth V6 VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, DPD received VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received Fragmentation VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, IKE Peer included IKE fragmentation capability flags: Main Mode: real aggressive Mode: false

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received NAT-Traversal worm 02 VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, the customer has received Cisco Unity VID

  Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, connection landed on tunnel_group testgroup

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA payload processing

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA proposal # 1, turn # 9 entry overall IKE acceptable matches # 1

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build the payloads of ISAKMP security

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building ke payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building nonce payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Generating keys for answering machine...

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of payload ID

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of Cisco Unity VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing payload V6 VID xauth

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building dpd vid payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing the payload of the NAT-Traversal VID ver 02

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of Fragmentation VID + load useful functionality

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, send Altiga/Cisco VPN3000/Cisco ASA GW VID

  Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR SA (1) KE (4) NUNCIO (10) + ID (5) + HASH (8) + SELLER (13) + the SELLER (13) + the SELLER (13) + the SELLER (13) NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) total length: 440

  Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: HDR + HASH (8) + NOTIFY (11) + NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) overall length: 168

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing hash payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing notify payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, useful treatment IOS/PIX Vendor ID (version: 1.0.0 capabilities: 00000408)

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, the customer has received Cisco Unity VID

  Jan 16 15:39:21 [IKEv1]: Group = testgroup, I

  [OK]

  KenS-mgmt-012 # P = 10.15.200.108, status of automatic NAT detection: remote end is NOT behind a NAT device this end is NOT behind a NAT device

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, empty building hash payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash qm

  Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 72

  Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 87

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, process_attr(): enter!

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, transformation MODE_CFG response attributes.

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary DNS = authorized

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary DNS = authorized

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized primary WINS

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized secondary WINS

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Compression IP = disabled

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Split Tunneling political = disabled

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: setting Proxy browser = no - modify

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: browser Local Proxy bypass = disable

  Jan 16 15:39:26 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, (testlay) the authenticated user.

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm

  Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 64

  Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + NONE (0) overall length: 60

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cfg ACK processing attributes

  Jan 16 15:39:27 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 49ae1bb8) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 182

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, treatment cfg request attributes

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 address!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 network mask!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for DNS server address.

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the address of the WINS server.

  Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, transaction mode attribute unhandled received: 5

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the banner!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting save PW!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: receipt of request for default domain name!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for Split-Tunnel list!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for split DNS!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for PFS setting!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Proxy Client browser setting!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the list of backup peer ip - sec!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting disconnect from the Client Smartcard Removal!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Version of the Application.

  Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Type of Client: Windows NT Client Application Version: 5.0.07.0440

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for FWTYPE!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: request received for the DHCP for DDNS hostname is: DEC20128!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the UDP Port!

  Jan 16 15:39:32 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets.  No last packet retransmit.

  Jan 16 15:39:37 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = b04e830f) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84

  Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing hash payload

  Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing notify payload

  Jan 16 15:39:37 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets.  No last packet retransmit.

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE has received the response from type [] at the request of the utility of IP address

  Jan 16 15:39:39 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cannot get an IP address for the remote peer

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE TM V6 WSF (struct & 0xd8030048) , : TM_DONE, EV_ERROR--> TM_BLD_REPLY, EV_IP_FAIL--> TM_BLD_REPLY NullEvent--> TM_BLD_REPLY, EV_GET_IP--> TM_BLD_REPLY, EV_NEED_IP--> TM_WAIT_REQ, EV_PROC_MSG--> TM_WAIT_REQ, EV_HASH_OK--> TM_WAIT_REQ, NullEvent

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE AM Responder WSF (struct & 0xd82b6740) , : AM_DONE, EV_ERROR--> AM_TM_INIT_MODECFG_V6H, EV_TM_FAIL--> AM_TM_INIT_MODECFG_V6H NullEvent--> AM_TM_INIT_MODECFG, EV_WAIT--> AM_TM_INIT_XAUTH_V6H, EV_CHECK_QM_MSG--> AM_TM_INIT_XAUTH_V6H, EV_TM_XAUTH_OK--> AM_TM_INIT_XAUTH_V6H NullEvent--> AM_TM_INIT_XAUTH_V6H, EV_ACTIVATE_NEW_SA

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE SA AM:bd3a9a4b ending: 0x0945c001, refcnt flags 0, tuncnt 0

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, sending clear/delete with the message of reason

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing the payload to delete IKE

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm

  Jan 16 15:39:39 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 9de30522) with payloads: HDR HASH (8) + DELETE (12) + (0) NONE total length: 80

  Kind regards

  Lay

  For the RADIUS, you need a definition of server-aaa:

  Protocol AAA - NPS RADIUS server RADIUS

  AAA-server RADIUS NPS (inside) host 10.10.18.12

  key *.

  authentication port 1812

  accounting-port 1813

  and tell your tunnel-group for this server:

  General-attributes of VPN Tunnel-group

  Group-NPS LOCAL RADIUS authentication server

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Why is it still a thing! Frustration with the video editing and interpolation

  I use photoshop for almost everything, especially with the animation. Lately however, I've been swapping between photoshop and paint tool sai for my animations. There is a big problem I've always had when it comes to photoshop and import video layers on my calendar. one that I feel is considered summer a major break-up high with the video timeline in general. Why does import images into a video layer causes the program disable the ' insert white frame, ""duplicate frame,"and"remove frame"options in the menu video layer. Why this option is disabled, and why is there not an option which will force rather that as active so that it is a video layer enabled. I do not use adobe Flash to cause of vectors and other minor impediments, that I got with the program. So, I have always painted, animation, and the edited photo using photoshop. Can someone explain to me why does one thing, and how do I present this as a feature of photoshop because it is a NECESSARY feature.

  Also, sidenote. I used wonderful plugins like AnimDessin, but there always seems to be something that has always been a problem with it. I wanted to see if there is a problem that goes beyond the limits of copy each image. and I paste into a 'empty new image' in photoshop. Thank you

  Photoshop cc user 2014 (64-bit)

  Please post Feature Requests to

  Community customer Photoshop family

  and maybe try to make your point more clearly, perhaps illustrate with screenshots.