Satellite Pro A100 plugged in causes interference on my monitor
A100 plugged it causes interference on my monitor. VGA and inlet supply located close together but this should not be an excuse. Any ideas please?
Post edited by: bitnutty
Hello
What exactly do you mean by interference on my monitor? Do you have the quality bad picture or what?
Another question; This interference appears on the internal laptop LCD display or the external monitor?
Have you tried updating the graphics card driver and/or BIOS?
Tags: Toshiba
Similar Questions
-
Satellite Pro A100 does not connect to the internet if the power adapter is plugged
Hello
I have a Satellite Pro A100
The machine will connect to internet on battery OK. However, if the power supply is connected it does not connect. Any ideas?
See you soon
JimHello
How do you connect to the internet? With the WLan or cable LAN?
It s very unusual as the intermits connection when the power adapter is connected.This question appears because you buy the laptop?
-
Satellite Pro A100 - PSAAAE CPU upgrade
Hi Toshiba,
I have an old * Satellite Pro A100 * _PSAAAE-type_ and I would like to upgrade the processor. I have seen that is 479, and I found that there are the Core 2 Duo on this plug. The 945GM chipset supports Core 2 Duo, but I don't know if my laptop BIOS supports these CPU.
Someone can confirm or not?
Thanks in advance.
Hello
In General, upgrading the CPU is not recommended.
Of course, you can use the processors that are supported by the chipset, but the BIOS compatibility is another story. No one can tell if your laptop would be stable after this upgrade due to the higher heat dissipation.But I read in this forum that some guys have upgraded the processor and the laptop still works
-
The Satellite Pro A100 has a modem 'voice '?
The Satellite Pro A100 has a modem 'voice '?
If so, can I make phone calls using the Dialer in MS Outlook with a microphone plugged into my laptop.
How can I do this?Please, don't make it so complicated. As a first step, it would be interesting to know what operating system you are using. On the Toshiba support page you can find sound driver and modem for operating system supported.
-
Satellite Pro A100 - it does not recognize 4 GB of RAM
Hello
today I purchased two 2 GB RAM Corsair DIMMS (DDR2 - 667 mhz) for my Satellite Pro A100.After that I updated the BIOS it detected the 4 GB of RAM, but the balance of RAM on the boot prompt checks only 3 GB of RAM. So I can use only 3 GB of RAM (I use ubuntu 64 as an operating system). When I try to RAM into another laptop, it works perfectly. A memtest86 + says check: no error. When I plug in a dimm in the laptop, it is correctly detected as a 2 GB dimm module (tested two DIMMs into the two slots on motherboard)
Anyone else seen this behavior? For me, it looks like a limitation or a bug in the version of the BIOS.
(The processor supports 64-bit (core2duo t5500))
concerning
KaiHello
What Satellite Pro A100 you have exactly?
As far as I know that some models can only be upgraded to 2 GB of RAM.It's really not easy to say what is the reason for this because I m confused on the subject of what the BIOS recognize the 4 GB of RAM, but not the boot prompt.
I'm not sure that maybe the modules are not compatible with your laptop. You can test other modules?Welcome them
-
Satellite Pro A100-080 does not start - stays dark after 3 beeps
Hello
After a week off, the Toshiba Satellite Pro A100-080 (PSAASE-00G004GR, 4 GB RAM) of my kids start not anymore.
When turn on/off the system, he * will beep 3 times * (one long, two short beeps), the HDisk light flashes 'blue' and then nothing more. A/c and battery power LED are 'blue', which seem to be OK status.
No other useful help, as the screen remains dark.We had upgraded to 4 GB MEM (Kingston) a year ago and I already tried the old used 1 GB (included with purchase) or the replacement of 2 x 1 GB since December 2007, but equal status with these modules. This is not
a defect of memory.I hope that this is not the motherboard, probably only the NVIDIA GeForce Go 7600 graphics included adapter?
Does anyone have an idea what could be the problem?Thx for a short help.
Hello
Generally this type of beep codes are hardware related or with other words, hardware is defective. So I think it's a hardware problem and an ASP must check your laptop computer to identify the cause of this.
On the Toshiba site, you will find a list of aspic:
http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider -
The second monitor connected to the Satellite Pro A100 "disconnect" himself
Hello
I use my laptop - Satellite Pro A100 (PSAACE) - with a second monitor with no problems until I did an upgrade to Windows Vista. After installation, the second monitor starts to show problems, i.e. that works intermittedly. Every 5 seconds or so the monitor "unplug" itelf and caps again. I hear the (UN) plug sound when she did this and the two displays flickers during this period.
Can someone suggest a solution to this problem?
Concerning
I put t know what can be the problem but it sounds like the connection problem. Make sure that the monitor is connected correctly. Also try to test it with another external monitor. Is perhaps the cable or connector defective.
-
Solution for DVD playback choppy on Satellite Pro A100
Hello!
I had this problem twice on my Toshiba laptop (Satellite Pro A100 bought in April 2006): the DVD used to play very well, but now (perhaps after an update of the driver or installation of software, I not sure what causes this) DVD playback is choppy, distorted sound. This occurs throughout all media players on Windows XP (for example, PowerDVD which came with the laptop) or Windows media player.
I searched the internet far from a solution and finally found how to solve this problem:
Go to Device Manager, select the "IDE ATA/ATAPI controllers" section, and then select the "second IDE channel", right click and 'uninstall '. (There are two second IDE channels, if you know which then just uninstall both.) Restart Windows XP, Windows XP will automatically reinstall the drivers without the need to download anything. Subsequently the DVD Player reads normally.
The symptoms of the problem, apart from DVD playback choppy, are the "transfer mode" gets stuck on PIO for a reason, and bring back to DMA with no opportunity to spend. I have no idea what software or driver causes this, or why, but if this is your problem too, if you think that this solves.
Cool, thanks for the inquiry and the nice information.
Could be useful to others here in the forum.
Nice to have these community users :) -
Battery for Toshiba Satellite Pro A100 M50
The battery in the laptop model was PA3399U-2BAS. A vendor has sent a substitute - his number is PA3399U-1BRS. He says he has 95% of its capacity, but when the power cord has been removed from the laptop is dead and will not re-start without plugging the cord back in.
This battery would have an acceptable replacement? The laptop is running on its battery at reduced capacity and needs to be replaced.
Any thoughts?
Just for your info:
Toshiba Satellite Pro A100 specifications you can use batteries follow
PA3399U-2BRS (6cell),
PA3399U-2BAS (6cell),
PA3478U-1BRS (9cell),
PA3478U-1BAS (9cell),
PA3400U-1BRS (12cell),
PA3400U-1BAS (12cell).Start your laptop with AC supply and battery, put the battery and if the battery is correctly recognized remove power supply.
The same thing happens again? -
Strange problem with RAM on Satellite Pro A100
I have a Satellite Pro A100 (not sure which...)
It came with 2x256mb RAM, which are mounted. I noticed my laptop slow, so I checked what he says on the properties of the workstation - who said RAM 192Mo...Any idea what's going on?
I had a peek inside, both are mounted securely, while the right push entirely? There is a small gap (about 1 / 2mm) so that is the little nick and real editing. -What is the cause? Or it's maybe faulty?Please help me!
Thanks in advance,Diana
According to the description of your problem, I guess one of the memory modules is not recognized by the system and the specified result 192 MB of Ram only tell me that your laptop has shared graphics memory card.
Satellite Pro A100 is fairly new to laptop and, in my opinion, you should contact service. The guarantee must be valid and if everything is defective it will be replaced free of charge.
If possible, tell us what Satellite Pro, you have exactly. This info you can find on the lower side of your laptop.
-
Satellite Pro A100 - blue screen keeps coming back
I have a Satellite Pro A100 (psaase) and a blue screen appears some time it says image kernel memory and the only way out is to restart the laptop.
How can I fix? Can someone tell me what's wrong with it and how to fix it?Thank you
There are hundreds of causes BSOD. What is the BSOD STOP code?
0x000000?
-
Satellite Pro A100-080: NVidia display driver's break in 3D games
Hello
I have some problems with the display driver since I bought the laptop 9 months ago. I tried to install each new driver published on the toshiba site but no driver is running stable on my system.
The problem is that my laptop crashes with blue screen when playing 3d games and my windows vista tells me that it is the display driver causing accidents.
I had the previous version of the driver installed several months ago and I think it's more stable than the current version. Unfortunately I lost the files for that one, but I prefer a functional driver for this laptop.
My laptop
Satellite Pro A100-080
Modelno. PSAASE-00G004GR
Made on 2007-02-20Thank you all in advance using the year
bgrds
RobertHello, Robert
Can you please tell us what games do you play on Vista? Do you play games designed for Vista or older games from Windows XP Home edition?
-
Satellite Pro A100 request BIOS password which was never put
Hiya
Have had my Satellite Pro A100 for almost 2 years and that all this time have never even heard of a password system, but all of a sudden, I turned on the laptop this morning and it does not load. I tried pressing F12 (can't remember why, it seemed the thing to do to read the instructions at the bottom of the screen), but nothing happened so I just turned off the power. Put on again, he asked the system password. (A black screen with a blue box, with the old text base BACK type fonts).
I have no idea what it could be, I tried the word system and tried just pressing on enter without text in there but it says incorrect password. I removed the battery and left 10 hours but put it back in the machine there is no difference, it will not always go through this screen.
I am the only user on this machine, have no idea what caused it. I am aware of security, have installed on complete McAfee AV and did not have anything odd happen at all. Didn't last changes made to the configuration, no new software etc. so I have no idea what prompted it.
Can anyone help please?
Thanks in advance
RachelThis password seems to be a BIOS password, but I have no idea why this password is displayed if you have never defined it.
Unfortunately, there is not a lot to see the BIOS password can be removed without the help of an ASP.Then, contact the service provider allowed in your country and request removal of the password.
I also recommend updating the BIOS after the technician removed the password.
Do you know how to find the ASP closest?
Here is a site with all FSA worldwide:
http://EU.computers.Toshiba-Europe.com/-> support download &-> find an authorized service providerSee you soon
-
Satellite Pro A100 - driver Nvidia GeForce 7600 Go blue screen problem
Hi all
I have a problem with my Toshiba laptop Satellite Pro A100 PSAASE.
Description of the problem:
During a game for half an hour the screen darkens and a second view later, I get a blue screen.
After the reboot, that the solution of the problem of Windows Vista tells me that the problem is caused by the graphics driver Nvidia see dietails below:Problemsignatur
Problemereignisame: BlueScreen
Betriebsystemversion: 6.0.6001.2.1.0.768.3
Gebietsschema-ID: 3079
Files that help describe the problem:
Mini101708 - 01.dmp
SysData. XML
Version.txt
More information about the problem:
BCCode: 116
BCP1: 87A8A3A0
BCP2: 8C8109B0
BCP3: 00000000
BCP4: 00000002
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1
Serverinformationen: 1daf36bb-f6aa-446d-9ddf-545744789c19I tried to find a solution or a new driver for my graphics card, but I couldn't find any useful information. I really the lates driver for my graphics card according to Toshiba lateral support (driver version: 7.15.11.5616), on the Nvidia homepage I also could not find a newer driver that I have.
Details on my laptop:
Modellname Satellite Pro A100
TEILENUMMER PSAASE-00G004GR
Serial number 27069711Q
BS-Microsoft Windows Vista Version? ¢ Home Premium 6.0.6001 Service Pack 1
BIOS 6.00 version
Processor Intel (r) Core (TM) 2 CPU T5500 @ 1.66 GHz
2048MB RAM Arbeitsspeicher
Festplattenkapazitat 120,580,372,480 [bytes] 112.299 [GB]
Capacity of the freien Festplattenspeichers 27,078,627,328 [bytes] 25.219 [GB]
Video NVIDIA GeForce Go 7600 Version = 7.15.11.5616
Bildschirmauflusung 1280 x 800 pixels
Farbqualitat True Color (32 bit)
Its Realtek High Definition Audio (with SRS) Version = 6.0.1.5326
Netzwerk Intel (r) PRO/Wireless 3945ABG Network Connection Version = 11.5.0.32 MAC-address = 00:19:D2:5E:37:D2
Intel(r) PRO/100 VE-Netzwerkverbindung Version = 8.0.44.0 MAC-address = 00:A0:D1:6 B: F1:F5
Modem TOSHIBA Software Modem Version = 2.1.73.0
Internet Explorer 7.0.6001.18000
IDE-Gerät TOSHIBA MK1237GSX ATA Device
CARPET * a DVD-RAM UJ-850 s ATA Device Version = 1.10 FW
YC3555P CIP693I SCSI CdRom Device FW-Version = 1.0I really would apreciate if someone can help me solve this issue.
> During a game for half an hour, the screen darkens and a second view later, I get a blue screen.
Well, my first thought is that this problem is related to the graphics driver.
I mean it could be a software problem.
But I know that a BSOD can also occur if the graphics card chip began to malfunction.
In your case I m not sure what could cause this problem. But to play a game, that the GPU is running with a maximum yield and produce a lot of heat. If the temperature rises to a higher level the GPU can also cause a BSOD.Anyway, first of all, you must check if the graphics card driver update could solve this problem.
Maybe you could use a driver from other websites but please note that this is ONLY possible at your peril! -
Satellite Pro A100 - recovery disc creator does not exist!
Can anyone help! My laptop works fine, but I wanted to create a bootdisk problems.
But Toshiba Assist > Protect & Fix > does not give me an option to create a startup disk.
Should this with this model?I have the recovery disk Toshiba that came with the computer, but were warned NOT to test, otherwise it can actually cause me problems!
Any ideas?Satellite Pro A100-302
Part number: PSAACE-008002ENThis option is not available on this model of laptop. Because of this, Toshiba offers recovery DVDs which can be used for the installation of operating system.
> I have the recovery disk Toshiba that came with the computer, but were warned NOT to test, otherwise it can actually cause me problems!
This info can only come from people who don't know what they are talking about. Please ask this person what he exactly meant, and I will offer you the good explanation on the recovery procedure if you want to.
Maybe you are looking for
-
cannot get rid of the pop up prestosavings click here for your charitable giving to purches 1.0
-
BSoD when installing driver display on Satellite P200D - 11 L
I just installed Windows 7 and everything works fine but I decided to install the drivers of Toshiba and when I was installing the display driver (for ATI mobility radeon HD 2600) I've got the so-called 'Blue screen of death '. Then every time that w
-
View photos of an old database?
I found an old file of database iPhoto on an old record of 2007-2008 all about? I'm guessing that all of these files have already been copied to my Lightroom library, but it is an easy way to view the contents of the iPhoto database? I have iPhoto on
-
where can I find the online manual for anHP 210Ba while a Photosmart printer?
help with the printer manual
-
I used the scan of my L7780 function regularly until a couple of days. It will not scan now. The other functions still work, but when I run the HP Scan Pro module, I get the message: "error. Sorry, scanner could not be initialized. (Scanner not foun