Why do I get windows error message direct Library closed unexpectedly when I close the program?

Similar Questions

• Error message - Oregon Trail ceased to operate and close the program.

  Original title: Oregon trail 5th edition with vista.

  I can't get my oregon trail to run on Windows vista. I already tried to change the way compatible mode to run on widows 98, but I always get an error message that the Oregon Trail has ceased to operate and close the program. Is there anything else I need to do to get the game to work?

  Finally, I got the game to work to reverse the graphics driver to an earlier version, but which in itself was more trouble. I couldn't go back to the way it was before. I finally just installed pilot lasted, but now it doesn't let me roll back again to play the game.  When I searched on the internet, it seems there are several compatibility issues with playback on Vista Oregon Trail. Is it possible one could use the old view of play the game without messing around with my settings of the screen?

• Why do I get an error message indicating units is not defined?

  Why did I get this error message?

  The unit Bar Delta-P of the string "[1] / IPT_Cylinder_1" is unknown.

  Define a new unit or an alias of the unit.

  Hello J,

  I was able to run your script posted by without error until I got the 'Calculate' button based on the amount in non-controlled ANALYSIS.  At the time wherever I checked it, however, your VBScript even produces on my computer the error you get on your own, to the ChnAverage() command.  Thus, I think somehow this button in the ANALYSIS got recently checked on your computer.  If you have the "Calculate the quantity-based" button checked, you see also avenues of treatment on the data portal:

  

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• With premiere pro cc2015 why can I get this error message when reading 'timers video and audio are not synchronized?

  With premiere pro cc2015 why can I get this error message when reading 'timers video and audio are not synchronized?

  Hello

  Here are the steps.

  Install a cable Audio virtual on your machine:

  http://virtual-audio-cable.en.softonic.com/

  Under HW Audio Configuration configured Virtual audio cable as default input device

  And value clock maser virtual audio cable and try reading.

  This issue with the message 'Audio material e/s overloaded at 00' can be fixed, follow these steps.

  Vinay

• Why do I get an error message when I try to download creative cloud on my new mac laptop?

  Why do I get an error message when I try to download creative cloud on my new mac laptop?

  There are MANY messages of error... which is yours?

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I can't open my e-mail address. Error Msg "check online for a solution and close the program."

  I couldn't open my email... get a pop up block saying message "check online for a solution and close the program.

  Hello

  Please check the email client that you use to send and receive mail.  You use Outlook or Windows Mail, or you are using an Internet e-mail account?  If you please you would follow with me to provide detailed information about your question, I would be very happy.

  If you use Outlook, go to the Control Panel, go to programs and features and attempt to repair the installed program.  If necessary, back up your data to this show and uninstall and reinstall.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Why do I get an Error Message When you use "Embed" to access a file png (for an asset class)?

  I use Flash Builder and Starling to create a new project. I created the initial classes for Starling running. Everything works fine.

  However, I created a class of assets (that will manage all the assets of the project) and I get an error message when you reference the png file. This png will serve as the main screen for the project. See below:

  {

  Import starling.textures.Texture;

  public class active

  {

  [Embed (source = ' assets/screenMain_background.png']

  private static var MainScreen: Class;

  public static var MainScreenTexture:Texture;

  Public Shared function init (): void

  {

  MainScreenTexture = Texture.fromBitmap (new MainSreen());

  }

  }

  }

  I have the file in a folder called 'active' which is in the main project folder. Why I get this error?

  In the "Issues" tab it reads as follows:

  "Couldn't find Embed source" assets/screenMain_background.png"

  

  you have a path problem.

  Start by adding the current directory in your src directory.  If this fails, experiement.

• Why do I get an error message when tryimg to remove the old version of java

  I am trying to remove an old version of java. new version is installed but iam gettind incomplete uninstallation oes and an error message

  Hello

  • What is you receive the exact error message?

  You can check these links:

  How to uninstall Java on my Windows computer?

  http://www.Java.com/en/download/uninstall.jsp

  After uninstalling Java, how to remove its entry in Add/Remove programs?

  http://www.Java.com/en/download/help/regkey_addremove.XML

  How can I clear the Java cache?

  http://www.Java.com/en/download/help/plugin_cache.XML

• Why I always get an error message on my cache in Bridge when I have already purged the central cache?

  I am having trouble in bridge with my cache. When I open the bridge I get the error message, 'the bridge has encountered a problem and cannot read the cache. Please try to purge central cache in the Cache preferences to correct the situation. "I've done this twice now and still get this error message pop up. In addition, my vertical thumbnails do not rotate automatically as they usually do the usual icon that indicates that a raw data file has been aligned in camera raw (to the right of the thumbnail) has disappeared and my rankings are not displayed to the top. I really need the functionality that I'm used I'm editing photos for customers. I'd like TO help! Thank you in advance!

  Answering my own question here, but if anyone else has this problem, try to hold Cmd-Opt-Shift when launching Bridge and choose Cache Purge. For some reason any purge the cache it worked for me vs go to Preferences.

• Windows Mail has stopped working when I close the program

  After using Windows Mail successfully, I close the program by clicking on the cross at the top right and immediately a box appears saying that Windows Mail has stopped working. Then, Windows Mail opens again and can be stopped as usual without the warning that it has stopped working.  How can I prevent the box "Windows has stopped working' appearing and restart the program?

  Hello

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message?

  I suggest you to try the steps in the following Microsoft article and check if this may help.

  Solve problems with Windows Mail:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Hope the information is useful.

• Why do I get an error message when you use the windows installer?

  OK, I am trying to install the Chipset drivers using windows install. I go to the gigabyte website and download the drivers from the chipset support and downloads. I go in the config file and click on the chipset of windows file install. It gives me the error "this installation package could not be opened. Contact the application vendor to verify that this is a valid installer package. "I made sure I got the download of the good mother Rev. and the right windows (x 64) option. IM at my wits end. I've asked this question before but cannot get a straight answer from anyone.  He has this annoying 1 cm around my screen black line. This isn't my moniter and it isn't my video drivers. IV update of windows. The only other option is my chipset. Any suggestions on how to work around this error?

  PS - I recently wiped my hard drive with Dban. If this would have anything to do with that.
  CPU: fx 8150 3.6 ghz

  MB: GA-990fxa-ud3 rev.3

  GPU: EVGA GTX 670 ftw

  RAM: Skill G 16 GB Ripjaws

  PSU: Corsair Tx 750

  OS: Windows 7 x 64 service pack 1
  Hardrives - 120 GB samsung ssd
  Western digital 1 TB

  Hi Ricky,.

  ·         You are able to install programs and drivers?

  ·         What is the motherboard Chipset Drivers file extension?

  You may experience this problem if the installer has downloaded file is corrupted. Follow these methods and check if that helps:

  Method 1:

  I suggest to download the drivers to a different location on the computer and see if you can install it from there. I suggest you to install the driver Chipset in high Mode and check if it installs.

   

  http://www.gigabyte.com/products/product-page.aspx?pid=4397#DL

  Method 2:

  Try to update your BIOS and then install the motherboard chipset drivers and all other available device drivers check if you get the error message.

  http://Windows.Microsoft.com/en-in/Windows7/BIOS-frequently-asked-questions

  Warning: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information helps. Let us now if you would like more support on Windows.

• Why do I get an error message saying "the specific module could not be found" when opening an image?

  original title: RunDLL

  I get the window followed whenever I click on an image or a file:

  There was a problem starting c:\Users\Jim\AppData\Local\Temp\seitybu\sxxqrbw\wow.dll that the specific module could not be found

  Can anyone advise on how to fix?

  Hi Jim,.

  I suggest you to navigate to the location of the file in the error message and check if it doesn't matter what suspicious file is present. There could be opportunities that your antivirus software would have deleted a few infected file, but would have left a few remnants, which is the origin of the problem.

  I suggest you use Microsoft safety scanner and look for viruses in your computer.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software. Here is the link to launch the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Let us know the State of the question, so that we can help you.

• Could someone explain to me why I am getting this error message #1009?

  Hello. I'm a tutorial on lynda.com hoping to learn how to use actionscript 3.0 and my copy of flash CS4 to create games. I wrote my code exactly as he has shown in the tutorial, but for some reason that I occasionally receive an error that says:

  "TypeError: Error #1009: cannot access a property or method of a null object reference."
  Monster / die)
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at fl.motion::AnimatorBase/end()
  at fl.motion::AnimatorBase/handleLastFrame()
  at fl.motion::AnimatorBase/nextFrame()
  at fl.motion::AnimatorBase/handleEnterFrame().

  It is not all the time but it will be from time to time. It seems really be anything specifically that it triggers either. I was also noticing that all the enemies react to that is clicked on. I don't know if these two things are related or not. I don't know if the error is caused by the monster library item code or code to the main timeline. Thank you in advance for looking at my code.

  This is my code for Monster library item:

  Import fl.motion.Animator;
  Import fl.motion.MotionEvent;
  "var this_xml:XML = < time Motion ="30"xmlns =" "fl.motion. *" xmlns:geom = "flash.geom. *" xmlns:filters = "flash.filters. *" >
  < source >
  < source frameRate = "10" x = "275" y = "200" scaleX = "1" scaleY = rotation '1' = '0' elementType = "movie clip" NomSymbole = "the monster" >
  < size >
  < geom:Rectangle = left "-32.5" top = "-32.95" width = '65.05' height = "65.95" / >
  < / size >
  < transformationPoint >
  < geom:Point = "0.49961568024596464" x = "0.49962092494313876" / >
  < / transformationPoint >
  < / source >
  < / source >

  < keyframe index = "0" tweenSnap = "true" tweenSync = "true" >
  <>interpolation
  < SimpleEase ease = '0' / >
  < / tweens >
  < / keyframe >

  < keyframe index = "29" tweenSnap = "true" tweenSync = "true" = "2.782" scaleX scaleY = "2.697" >
  <>interpolation
  < SimpleEase ease = '0' / >
  < / tweens >
  < / keyframe >
  < / motion >;

  var this_animator:Animator = new Animator (this_xml, this);
  this_animator. Play();

  this_animator.addEventListener (MotionEvent.MOTION_END, hurtPlayer);

  function hurtPlayer (MotionEvent): void
  {
  var host: MovieClip = MovieClip (this.parent.parent);
  main.decreaseEnergy ();
  this.parent.removeChild (this);
  }

  this.addEventListener (MouseEvent.CLICK, killMonster);

  function killMonster(event:MouseEvent):void
  {

  "this_xml = < time Motion = '5' xmlns =" "fl.motion. *" xmlns:geom = "flash.geom. *" xmlns:filters = "flash.filters. *" >
  < source >
  < source frameRate = "10" x = "275" y = "200" scaleX = "1" scaleY = rotation '1' = '0' elementType = "movie clip" NomSymbole "Monster" = class = "Monster" >
  < size >
  < geom:Rectangle = left "-32.5" top = "-32.95" width = '65.05' height = "65.95" / >
  < / size >
  < transformationPoint >
  < geom:Point = "0.49961568024596464" x = "0.49962092494313876" / >
  < / transformationPoint >
  < / source >
  < / source >

  < keyframe index = "0" rotateDirection = "cw" rotateTimes = "1" tweenSnap = "true" tweenSync = "true" >
  <>interpolation
  < SimpleEase ease = '0' / >
  < / tweens >
  < / keyframe >

  < keyframe index = '4' rotateDirection = "cw" rotateTimes = "1" tweenSnap = "true" tweenSync = "true" = "0.416" scaleX scaleY = "0,378" >
  < color >
  < alphaMultiplier color = '0' / >
  < / color >
  <>interpolation
  < SimpleEase ease = '0' / >
  < / tweens >
  < / keyframe >
  < / motion >;

  this_animator = new Animator (this_xml, this);
  this_animator. Play();

  this_animator.addEventListener (MotionEvent.MOTION_END, die);

  }

  function die(event:MotionEvent):void
  {
  var host: MovieClip = MovieClip (this.parent.parent);
  main.increaseScore ();
  this_animator. RemoveEventListener (MotionEvent.MOTION_END, hurtPlayer);
  this.parent.removeChild (this);
  }

  This is my code to the main timeline:

  var monstersInGame:uint;
  var monsterMaker:Timer;
  var container_mc:MovieClip;
  var slider: MovieClip;
  var score: int;
  var energy: int;

  function initialiserLeJeu (): void
  {
  monstersInGame = 10;
  monsterMaker = new timer (1000, monstersInGame);
  container_mc = new MovieClip;
  addChild (container_mc);
  
  monsterMaker.addEventListener (TimerEvent.TIMER, createMonsters);
  monsterMaker.start ();
  
  cursor = new Cursor();
  addChild (cursor);
  Cursor.Enabled = false;
  Mouse.Hide ();
  stage.addEventListener (MouseEvent.MOUSE_MOVE, dragCursor);
  
  score = 0;
  energy = energy_mc.totalFrames;
  energy_mc.gotoAndStop (Energy);
  }

  function dragCursor(event:MouseEvent):void
  {
  Cursor.x = this.mouseX;
  Cursor.y = this.mouseY;
  }

  function createMonsters(event:TimerEvent):void
  {
  Monster of the var: MovieClip;
  Monster = new Monster();
  Monster.x = Math.Random () * stage.stageWidth;
  Monster.y = Math.Random () * stage.stageHeight;
  container_mc. AddChild (Monster);
  }

  function increaseScore (): void
  {
  Note ++;
  If (score > = monstersInGame)
  {
  monsterMaker.stop ();
  }
  }

  function decreaseEnergy (): void
  {
  energy-;
  If (power < = 0)
  {
  monsterMaker.stop ();
  }
  on the other
  {
  energy_mc.gotoAndStop (Energy);
  }
  }
  initializeGame();

  OK, so after withdrawal of an element of the class that you are trying to remove it again.  to avoid that you can use:

  {if(this.parent!=null)}

  this.parent.removeChild (this);

  }

• I get an error message "Macromedia Shockwave (TM) Player when I try to install sold out game flight unlimited 3_ does that mean?

  try to install flight unlimited 3; I get the error message; Macromedia Shockwave (TM) Player. What does that mean?

  Moved from Vista to install, upgrade and activate Forum.

  And threads merged.

  Duplicate deleted

  Shockwave player is of macromedia.com

  They also have 'flash player' you have probably installed...

• Get the error message 'connection of diagnosis problem' when to access the Ebay.ca site

  Original title: I was not able to connect to EBAY.CA for weeks.  It is continually unable to establish the connection.  Why?

  I've never had a problem connecting to this web site.  Just type in ebay.ca and it happens.  No more.  Whenever I try to connect this page comes to diagnose the problems of connection but only to that particular web site.  What is going on?

  Hello

  1 which browser is installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  3. What is the exact error message to diagnose connection problems?

  If you have Internet Explorer, perform the steps from the link.

  Can't access some Web sites in Internet Explorer

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this information helps.