Why 'Do the work path' give lousy paths?

Similar Questions

• Why do the link paths include... / models /...?

  I created a template page with navigation buttons and links pages. But after the creation of this template pages, whenever I have test, the page is not found.
  
  For example, instead of finding the "about.htm", he says "can not find the page"... / mysite/Templates/about.htm. ""
  
  For some reason any .../templates/ get inserted into the path of the link when I created a page from the template. Anyone know why this is happening and how to fix?
  
  Thanks in advance for any help!
  
  DM

  Thanks a lot for your help on this. I did the link cleanup as it appears.

  Then it still does not work... but then I changed all the links to register "... /' in front of them, she started to work!" Yahoo!

  Thank you again...

  DM

• Why used the work of my Movie Clip 3D rotation tool?

  Im trying to use the tool rotation 3d for the first time. I have a picture, set as a (movieclip) symbol on its own layer. However, when I select the 3D rotation tool, it me does not change the clip. It shows me just the empty arrow.
  Could someone please shed some light on this? The only information I can find about this tool doesn't work does not correctly is if you try to manipulate an object that is NOT a clip.

  Thank you!

  Hi Sarah,.

  The screenshot shows that you have selected the 3D translation tool. Just press W to activate the 3D rotation tool (or click and hold on the Group of 3D for the suboptions tools and select the rotation tool). You should be able to use the 3D on this clip rotation after that. Let us know if there are any other questions.

  Kind regards

  Dharmendra.

• How can I get rid of an outline of work-path in a 3D extrusion?

  Hello, experts. I use Photoshop CS6 current El Capitan and tried to make a 3D wine glass, put in the hands of one person in a family photo. Well, in this area, I managed, but the original sketch of the work path shows one side of the wine glass, completely ruin the effect! Is it possible to remove this contour and end up just with the wine glass, or am I stuck with it? If so, it doesn't seem to be much interest to create 3D objects.

  Thanks in advance for all the tips.

  FTT

  When you apply the texture of the glass to your wine glass extrusion material you also add it to the other material wine glass before inflation bevel/back inflation/front/rear bevel?
  With a pattern like a wine glass where the original front and rear sides were shrouded by 360 degrees and combined, you have to make sure that they have the same transparency as the rest.

  Click on each in the 3D Panel and assembled the same glass material that you used for the extrusion.

  

  Dave

• Save the work Via script

  Hello

  I need to save the current work in Photoshop path as soon as the last anchor point is closed by automatically in the tiff document. Need help to save all the paths that I created in a document. While I can use it for subsequent selections. Please tell me the solution as soon as possible.

  Thank you

  VINET.

  I think that once you create a work path you want to be able to use then all you need to do is rename the work path to be kept with a name you know. If you want to do it more than one in a document, you need to find a way to generate unique names for each change of name avoid the path with duplicate names.

  This action handler code can work for you.

  fubction {RenameWorkPath (name)}

  // =======================================================

  var idslct = charIDToTypeID ("TPCV");

  var desc44 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  var ref16 = new ActionReference();

  var idPath = charIDToTypeID ('Path');

  var idWrPt = charIDToTypeID ("WrPt");

  ref16.putProperty (idPath, idWrPt);

  desc44.putReference (idnull, ref16);

  var idMk = charIDToTypeID ("Mk");

  var desc48 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  var ref18 = new ActionReference();

  var idPath = charIDToTypeID ('Path');

  ref18.putClass (idPath);

  desc48.putReference (idnull, ref18);

  var idFrom = charIDToTypeID ("from");

  ref19 var = new ActionReference();

  var idPath = charIDToTypeID ('Path');

  var idWrPt = charIDToTypeID ("WrPt");

  ref19.putProperty (idPath, idWrPt);

  desc48.putReference (idFrom, ref19);

  var idNm = charIDToTypeID ("Nm");

  desc48.putString (idNm, name);

  executeAction (idMk, desc48, DialogModes.NO);

  }

• Method of Report.Save, the report has been made in a new path, but why is the empty file?

  Hallo,

  I have a problem to save the report file in a new way.

  In my code, I used the Runstate.Report.Save(newpath, overwrite, 0) method to save the report.

  And after the excution of the test, I can find the file of report in the right place, but if I open it, it's empty, I mean, there's nothing in this report.

  Someone has an idea? Where is the problem? And what I could do?

  Thank you!

  Cabio

  Hi Cabio,

  Before answering your question, I would like to let you know that you can configure the path to the report file in the report file path tab report options.  You can choose from several options, including by specifying an expression that is customized for the report path.  This will allow you to customize where the report is saved without changing code.

  If this isn't meeting your needs, the problem you're likely to have is that you access report until the report is actually produced.  To access the report object after it has been populated, replace the ProcessCleanup callback, which runs after the report has been generated.  (see the example of navigation PreUUTCallback for an example of substitution of a reminder.

  Note: if you use TestStand 2012, this method will not work unless you configure Report Builder for not using a new thread.  You can configure this option in the treatment of dialogue by selecting the checkbox options more results.  If you do not want to use a new thread, you can access the report by changing the sequence of AddUUTReportAndSave in ReportGen_ATML.

• Create the work around plan group, unless there is a clipping path, and then create the work around clipping path plan

  Hello again everyone.

  I was able to work on a lot of this code to other people's questions, but I hit a snag in my if/else clause structure... I need to make a plan to work around each groupItem of high-level layer [0]. This part is cake... unless there is a clipping mask. Visible limits do not work when there is a clipping mask. So, I built some of the loops that browse the pathItems search the clipping mask and return the visibleBounds said mask. However, I can't find how to structure the if clause in a way that will create the plan of work around the clipping mask when one exists.

  I am successful to find the visibleBounds of the mask and the creation of the appropriate graphic board, but it is ALSO to create a work plan around the visible boundaries of the entire group. How framing an if clause to determine if a work plan has been done around the clip path already and therefore not create a second work plan around the visible boundaries of the groupItem together? I guess I would need some sort of function to determine if createdArtboardAroundClip = true and if so, skip this group...

  Thank you all.

  Here is the code:

  var aB = docRef.artboards;
  var docLayers = docRef.layers;
  var layer1 = docLayers[0];
  var groupLevel1 = layer1.groupItems;
  
  for (a = 0; a < groupLevel1.length; a++){
      var groupLevel2 = groupLevel1[a].groupItems;
      var vB = groupLevel1[a].visibleBounds
      
      for (b = 0; b < groupLevel2.length; b++){
          var paths = groupLevel2[b].pathItems;
          
          for (c = 0; c < paths.length; c++){
              if (paths[c].clipping == true){
                  var clipBounds = paths[c].visibleBounds;
                  aB.add(clipBounds);
                  break;
                  }
              }
          }
      aB.add(vB);
      }
  

  Oh sorry, I forgot that one.  I was able to view the image basically to see what is happening.  Okay, so I saw a problem, you have one of your straps closure irrelevant.   Your first nested for loop does not close where you want.

• Not complete the CSS path

  My apologies if it is being discussed elsewhere, but I just switched to CC2015 of DW8 (yes I know, but if it ain't broke don't fix it - I had to buy a new Mac...)

  For some reason any designer CSS component only writes that the last piece of the CSS path

  If the full path were: #wrapper #leftCol UL #Social

  When I click on the '+' in the Panel CSS designer to add the selector, the path is only the UL #Social and I have to manually add the rest.

  I did not understand why when I change the color of the text for example, it would not target the switch properly until I had finished the rest of the way... I don't know that dw8 did not have this problem...

  For what it's worth - by clicking on the + sign in the CSS designer never give me what I want and there never... you could spend time trying to fix something that never worked they way you want only there in the first place.

• I need help using the target path tool

  Hi all

  I realize that I need to keep all my code in the main storyline, so now I need serious help with targeting movieclips and buttons, when I use the target path tool (the viewfinder in the action script Panel) it allows me to navigate to the thing I want, but when I use his suggestion it very often does not work , and I find myself using trial and error to get by.  ICAN get stuff to work, but I really have no idea why or how I do it, sorry to be a N00B, but I really think that if I can work that I get somwhere.

  See you soon

  void

  subtlefly72 wrote:

  Thanks kglad,.

  OK, this is essentially what I did, but its been a bit hit and Miss, but maybe now, I can't see why, your last sentence

  of course, all of these objects have which existed at the time your code runs.

  So if I'm making refers to something within a mc and it does not exist on the first image, there will be an error?

  exactly.

  also, what is this.  Object() and Object (parent)?

  I have to be the use of these?

  not when using the code on the main timeline.  "This" refers to the current scope, which is for the code in the main storyline, the main timeline.  What follows is the same:

  This.MC and mc

  This.var1 and var1
  

  And again, I want to know why the target tool gives me a path that does not work?

  I can't tell you much about the tool to the target.  I never used it.  but I tried to test this afternoon and it seems to work fine to target a nested movieclip.  again, you must ensure that this object exists when your code runs so if you're targeting something on the frame 2 (or more) of a movieclip using the code on frame 1 of the main timeline, the reference may be correct, but the object does not exist when your code runs.  There are a number of ways to handle this, if this is your main problem.

• PCTCT regardless of the DIRECTORY path variable

  I have a table (list) that called several folders. I use ListGetAt based on the index of the value of cfloop to get the name of the folder I want LISTDIR with PCTCT. I attribute the name of the folder to a variable. Test demonstrates the foldername table works fine. Name of the folder hardcoding in PCTCT gives the desired result. BUT, when I replace all or part of the DIRECTORY = 'path' with the file name-variable default performance is the root directory as defined by the ftp credentials.
  
  Why DIRECTORY = "" folder/logs / "give me what I want and the DIRECTORY =" # file #/ logs "ignores even when he #folder # is clearly defined?" I used variables inside PCTCT before, so I know that works... I am puzzled, see attached code for reference; (FYI 'files' are assigned to the variable called 'House')

  It turns out that it was a problem of path with the FTP credentials, I'd simply not the path correctly disposed to get code find its target. No one could help with that!

• Why the division operator give me different results in different screws?

  Hi all

  I'm quite the LabVIEW newbie, so please forgive me if it's elementary.  I have a signal that I'm acquisition.  The signal is fairly low amplitude (.01-0,1 V).  During each acquisition, I share the values of the sample defined by another few (0.047) using the division operator.  I see inconsistent results and I am puzzled as to why.

  In ex1, which I built from scratch for this post, everything works as expected.  I can confirm with the debugger that every reading of the sample overall is well divided and the average, max and waveform graph look like I expect.

  When I use a similar construction in my real application, however, the division often results in the INF file, and when I look with the debugger I see after fracture of the values of the signal... just don't make sense to me (x 2).

  I thought I must be missing something in the real application associated with split and merge multiple signals, so I ripped out everything except the Division (ex3).  Although this code looks a lot like the ex1 works well, the product always division infs and strange results.

  These three examples receive the same signal.  My best guess is at this point that the built-from-scratch example is force double passes to the operator of division "the right way" and that the examples of dysfunction are force double in a different way, incorrect.  I tried to delete and re-create the signal path in the examples of dysfunction without result.  My problem is that I don't know enough about the LabVIEW data types to find out how to impose the appropriate constraint.

  Can someone point me in the right direction for a solution?  I would be very happy to help.

  Your first image divides your signal of 0.047. Your second and third images are 0.047 dividing your signal. Reverse your son in fracture on image 2 and 3 knots, and I think you should be ok.

• Access to the system path

  Hello

  I'm trying to access the filesystem space, temporary / persistent and I am able to create folders in the same and create a set of files also.

  but when I try to access local://temporary// directly as a link in my HTML, but I am not able to do.

  no idea what is the problem here? How can I achieve access to the same works in all platforms like Android/IOS and Windows. Why to BB10 it does not work? Can u please explain?

  Hello

  There is no persistent or temporary path that is consistent between all platforms of Cordova. The property nativeURL of the FileEntry you will get the correct path.

  Here is an example of downloading an image, save in a persistent storage and then access via an img tag:

  https://gist.github.com/bryanhiggins/1551ba15e9049b128fd5

  You will need org.apache.cordova.file > = 1.1 and the following in the file config.xml for the example works:

      http://cordova.apache.org" />
      
  

• Access to folders and files on your computer using the UNC path in another area

  We have two different fields in our society (let's say the domain A and domain B)

  and are under the same subnet. Since some colleagues need to access the files in both sides,

  What we had planned is to their PC to join A domain and create a user account in domain B.

  When they need to access domain B to domain A PC files, they simply type in the unc path and

  Enter the credentials of their domain user account B.

  Now the situation is, when the user types in their identification of the B domain user account information, it always displays in Windows security:

  Connection failure: unknown username or bad password

  I wonder - is this due to the feature win CredSSP 7, as the CredSSP will affect Remote Desktop

  that cause similar unless problem shut down us by editing the default.rdp.

  Anyone know CredSSP is the cause of this problem? Or is it caused by another issue & no work around for it?

  Hello Frederik,

  I have already made to precede the user name with the domain name but always this error.

  Why I think that it is related to CredSSP is because I got the same error when I use

  remote control for PC B of the domain A PC. While the issue of distance is resolved by changing

  default.RDP with notepad, adding, [enablecredsspsupport:i:0] at the end.

  So, I wonder the problem of file also caused by CredSSP.

• Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

  This is the error message I get after several days of decline in dropbox, my Norton, saying that he was sure loading! I have read and re read most of what people have written, and I have no idea! I'm not a person irritable and can someone put in easy terms what should I do to solve this problem! I read try it who try and read that nothing works. Does anyone know if something works and can it tell me please. Also if someone from Microsoft is reading this why not have you solved this problem?

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

  Hello

  You did changes to the computer before the show?

  These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point. Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  http://support.Microsoft.com/kb/973455/en-us

  I hope this helps. Let us know if you have other problems with Windows in the future.

• error packaed and launch: Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path:

  Hello

  I get this error when you try to run the sample of cards on the corrugation Simulator:

  Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path: "/ Users/Calgacos/Library/Application Support/Google/Chrome/Default/Extensions/cnijnnaimeaacneklcndcafbnkeicckh/0.9.16_0/services/node/node_modules/rbd/Packaged/Maps.zip".

  The .../rbd/Packaged folder is writable and the Maps.zip will be created in the folder ~/RippleSites/Maps/Packaged.  With the help of Mac, the latest versions of everything.  The application runs in undulation ok, but I can't throw on the SIM BB10.

  Someone else have this error and know why?

  PS the Maps.zip does not get created (or copied) in specified folder, of course, but why?

  PS try another application and it worked but is too has not put its zip file into the folder... rbd/Packaged.  I guess it should not but leaves me clueless as to whats wrong with cards.

  Thank you

  The two directories (in the extensions directory and maps project directory) have permissions to 777.

  But you gave me an idea...

  It turns out that simply by putting

  "Packages".

  in setting output wasn't enough, I need the full path

  for example: "/ Users/username/RippleSites/Maps/packed."

  and presto, now it works!

  Thank you!