Why does the CPU usage varies with different codecs?

Similar Questions

• Why does my 7th generation nano play different versions of the same song (acoustic, demo, replacing) one after another before she switches to a different song.

  Why does my 7th generation nano play different versions of the same song (acoustic, demo, replacing) one after another before she switches to a different song?

  Maybe the current list of the song has the songs listed in alphabetical order, and you have the iPod nano to play in the order of the list...  How do you think iPod nano to read the list of songs?

• game does not open on steam, but says its running on the CPU usage

  football manager 2011 order opening via steam as usual. but it shows that it is running on the CPU usage

  Hello

  1. what version of windows is installed on the computer?

  2. were you able to play the game before?

  3. what browser do you use?

  I suggest you to give us more information about the issue so that we can help you better.

  It will be useful.

• The CPU usage

  Hello.

  I have two boot server with 3.5 update 5, the first to have all virtual machines powered, the second did not start the virtual machine, but when I check the processor, the memory usage, I see some extrange. The second server uses 12% of the processor, the same as the first server (but with no virtual machine under tension).

  How can I check which process is using CPU in the second server.

  Thank you...

  Hello

  Maybe your virtual machines to sleep... That is why the CPU usage is so low and substantially the same on both servers. But as you can see, consumption of memory is different. This is because even if a virtual machine does nothing, it does not free its memory in contrast to CPU resources.

  Take a look at each VM CPU consumption to confirm the normal behavior of your host.

  Concerning

  Franck

• The CPU usage goes up to 50-60% right when I start the computer.

  Original title: high CPU usage

  I have a pc with windows 7 64-bit, 4 GB ram, AMD Phenom II x 2 511 processor and a Nvidia Geforce Gtx 260. The CPU usage goes up to 50-60% right when I start the computer. I ran the Task Manager and there is no program using the cpu. It has nothing to do with anny viruses because I scanned the computer with two different programs. We do not have Steam and the EA download manager. What could be the problem?

  "Idle" means "doing nothing."  Windows runs the "System Idle" process when the processor has no useful to perform tasks.

  Look at the status bar at the bottom of the Task Manager and you will see that the CPU usage does NOT include the percentage for the System Idle process.

  What are the processes other than Idle System added up to 50-60%?

  I suggest that you run an online scan using antivirus ESET online--> http://www.eset.com/us/online-scanner/

  and then download, install, update and run the free MalwareBytes AntiMalware--> https://www.malwarebytes.org/ version

  I expect that the MalwareBytes Installer is clean enough, but you should pay attention when installing any software to make sure that you accept all of the pre-selected options to install other bundled applications.

• Satellite C650D - the CPU usage is jumping around

  I bought a Toshiba Satellite C650D 2 months ago and I used the Windows 7 that came with it, thinking that it was fine and dandy until a few days ago, he started having random lag spikes.

  At first he just happen when you watch movies (tried 4 different programs, all reinstalled the driver, scanned for malware, defragmented, you name) and then she started to occur outside the viewing of film aswell. Who did it for me, and I installed Windows XP. I did 3 times now, clean install it Windows XP. Initially, it seemed fine. For a few hours, and then it started lagging really bad, not like in Windows 7, but the CPU usage is jumping all over the boundaries between 1% and 99% at random, but there is no process to take it!

  He lags behind what I do, just open the Notepad can blow. I thought that it would work with a format clean, but no, of course the problem reoccured. It might be drivers, see problems in Windows 7 and XP are somewhat different. I'm in my intelligence ends here on what to do, whatever that is would be helpful.

  Hey Buddy,

  Looks like on your laptop is a background passes process that is causing this different and high CPU usage.

  What happens if you install Windows 7 Toshiba Recovery disk and look in the Manager of tasks? Directly after this installation, you should have a low CPU usage and stable because it s installation of Windows from Toshiba.

• The CPU usage goes to 100%

  I have a laptop Dell Studio 2010, the processor Intel, 4 GB of ram, hard disk 320 GM (180 GB consumed) running Windows 7 and IE 11 giving me CPU usage problems.  I don't know what everything is related, so here's the story.

  I lived my download speed slow - dropped by half every 2 hours or more after a reboot.  Occasional problems with the speed of the computer as well, and when I checked the resource monitor I see the CPU usage hit 100%.  A reboot has always solved the problem.  Running in Mode safe mode eliminates the loss of download speed so I knew it wasn't a problem with the hardware or my cable modem or a wireless router.  I have explored many possible problems, but none solves the problem, then I reinstalled Win 7 Friday, January 16.  Download speed, not only fixed but faster than before.  It remains stable and do not disintegrate so there was something wrong with the OS, etc.

  However, the problem of the use of the CPU remains.  What seems to happen is that something triggers a high demand and then all processes on the computer joins.   When I look at the resource now monitor consumes 1.3% of CPU, but when things are choking it consumes 15% of CPU and go all processes running as 0.5% to 5%.  So you can't point to a single process as the culprit it is possible that web sites of strong demand (lots of ads) trigger the problem.  I'll do some research on that.

  I did a lot of web research as well as this forum, and no patches seem to work or apply to me.  I ran a Malwarebytes scan and a full virus scan with Microsoft Security Essentials: nothing found.

  The computer is almost 4 years, but I wouldn't spend the $$ to replace and find that the problem is software.  Any ideas?

  The problem solved when I've upgraded to Win10 on this machine.  At the same time degradation download speed (with time) newsletter is resolved.  I can't imagine how everything worked but I discussed the idea with several IT people I know and have gotten various suggestions.

  Since a clean installation of the operating system has not fixed it, I do not understand why install Win10 fixed, but that's it.

  Since then, I've replaced this computer.

• After ebms_stats. GATHER_FIXED_OBJECTS_STATS, the CPU usage is 100%

  Hello
  
  After that I ran exec dbms_stats. GATHER_FIXED_OBJECTS_STATS on my database, the CPU usage is almost 100%
  Can you please tell me how to revoke this change?
  
  Version of DB-> 11.2.0.3
  -> Linux OEL5 64 bit OS
  
  Thank you!

  There could be a statistics screen of restoration with a box fixed objects somewhere in your statistical optimizer dbconsole administration screen. (I'm on a different version, so I can't say for sure).

• Satellite A45 - the CPU usage is high and slow applications

  Hi all

  I'm trying to debug a hardware problem on my Toshiba Satellite A45. I am running Ubuntu 10.04, but I don't think that it's operating system or related software.

  THE PROBLEM: The CPU usage is high and applications slowly to a crawl after using an intensive application of memory for a few minutes, i.e. to watch a video or a game. Basically, anything that could use the screen much. If instead, I work only from a prompt, even when the application could do a lot of work, I do not encounter this problem. After stopping all applications, the CPU usage is always higher than normal (90% idle, should normally be slowed down to about 99%).

  Xorg now typically showing about 6% (normally use< 2%).="" if="" i="" at="" any="" time="" after="" this="" try="" to="" work="" in="" any="" application,="" usage="" is="" still="" bogged="" down.="" only="" a="" reset="" gets="" me="" back="" to="">

  Note: My system has always worked very well and I did not made the installation of the software or changes when it started to happen.
  However, the laptop is a 800 miles round trip at the rear of the car in a padded bag.

  DEBUG: This doesn't seem to be the RAM that I replaced the RAM and reinstall the RAM, and the problem persists. This doesn't seem to be the hard drive that I can try to run it from a Live CD (without use of HARD drive) and yet everything slows to a crawl.

  HELP: I don't know how to debug from here.
  I don't have extra pieces of hardware to make swaps.

  Any ideas more how to debug this?

  Thank you
  Grommit

  Hello

  > I am running Ubuntu 10.04, but I don't think that it's operating system or related software.
  It s interesting why you think that this may be software related issue

  I think that it is a typical software problem because the RAM and the HARD drive has been verified you have reported this in the message

  So what to say maybe some virus or malware likely to obstruct the CPU and the memory usage
  Or there is some process in the background that are not properly

  I recommend you to reinstall the Windows operating system or another distribution of Linux that runs NO Live CD, but which is installed on the HARD drive
  I m sure that s kind of the process that is disabled and crashes somewhere in the background

• Satellite A300-1IE - CPU usage high with Bluetooth active

  Hello!

  I recently installed Windows 7 and the Toshiba Software Installer on my Satellite A300-1IE.

  I have a problem with the bluetoothmanager, it's more than double the CPU usage when turned on. When I close the CPU usage goes down.
  This is not normal?

  When the BT active CPU usage is 9 to 15% and when not 1-3%

  Seems to be high. Try an update of the Bluetooth stack.
  http://APS2.toshiba-tro.de/Bluetooth/?page=download
  Ensure that you answer the question during the uninstallation, if all configurations should be removed, with Yes.

• Satellite P100-219: model seesaw in the CPU usage graph / wireless switch

  Has anyone noticed a trend sawtooth in the graph of CPU usage (quickly repeat that 10% performance spikes) in idle operation? Crampons disappeared after I switched the wireless (WLAN & BT) light...

  Hello

  Usually, if the 3rd program tries to connect to the WLan or the BT will increase the CPU usage. It s not easy to say why it happens because no one knows what you have installed on your laptop, or what settings unique applications have.

• The CPU usage of Flex-2 15 30% when idle after upgrade to Windows 10 * contains large Images *.

  BTW my 15 Flex-2 upgrade to Windows 10 Home took place, working after a few minor updates manual driver (WLAN, graphics)...

  However, since the upgrade, I feel an annoying symptom, which has been reported by users of other brands as well.

  Although I already follow most of related advice (known assassination unnessary process, change of reports), the CPU usage is still constantly around 30%, causing the fan to operate continuously and even more unsatisfactory: extremely affecting the battery life! Using processexplorer that I discovered, that svchost (or one of its processes) is at the origin of the problem, not one of the applications. As I am not able to dig deeper, I wonder what measures taken so far by Lenovo to have the Microsoft fix this problem.

  Attached: screenshots 'notification', 'Treaty', 'system '.

  Other tips are appreciated.

  

  

  

  Mod edit: added warning about large images for those who have slow Internet service.

  UPDATE Oct10:
  

  Went to manually check tile Lenovo Support and offered an update of SystemInterfaceFoundation.exe.

  Run the update and believe it or not: the CPU usage is almost back to normal (about 4%) with browser open FF and AV SW race. less than 2.5% use svchost. Fan turns down to 'stop' or low speed.
  Can someone pls? Be wary of situation for the next few days...

  Update Oct11:

  No idea how to mark this "resolved" thread: System runs stable like a charm. Quiet, low CPU utilization and the normal battery life.

  No other text. Problem solved. See above

• How to check the CPU usage and paging using LabVIEW

  Hi guys,.

  I build an application that is used to check the CPU usage and paging using LabVIEW. How can I do?

  any help, suggestions or advice will be greatly appreciated...

  Kind regards

  Prashant

  Hello

  If you plan to build your app for Windows, you can use .NET classes. (System.PerformanceCounter), there is a simple example with LabVIEW:

  C:\Program NIUninstaller Instruments\LabVIEW 2010\examples\comm\dotnet\SimpleTaskMonitor.llb

  

  Also, you have several screws that you can use to verify information about the processor.

  

  Kind regards

• How to get the CPU usage in LabWindows using C program

  Hi all

  Please help me...

  How to get the CPU usage and the use of the RAM in LabWindows CVI 12.0 using C.

  Any help with this will be appreciated.

  Thank you in advance

  
  

• AppleMobileDeviceService.exe always takes 50% of the CPU usage.

  Original title: year App called AppleMobileDeviceService.exe constantly takes 50% of the CPU usage.  I'm not using iTunes.  Said Apple iI should ask Microsoft.  I use oper AX. sys.

  An App called AppleMobileDeviceService.exe constantly takes 50% of the CPU usage.  I am not connected to iTunes and my iPod is connected to my PC when this .exe runs with 50% usage.    Apple suggested that contact Microsoft.  I use oper AX. sys. Apple has suggested to contact Microsoft.

  Hi Armycyrus,

  Have you done a recent software or hardware changes to the system?

  Method 1:

  If iTunes is installed on the system, you can try to uninstall and reinstall the same and check if it helps:

  For more information, see the article:

  Remove and reinstall iTunes, QuickTime, and other software components for Windows XP

  Method 2:

  It seems to reset Winsock has solved the problem:

  For more information, see the Apple support links:

  HT3204 Apple Device Support hogging CPU, impossible to download podcasts

  Apple on Windows software: can see the performance problems and virgins iTunes Store

  Alternatively, you can try to reset Winsock and check if it helps:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  Important: The foregoing contains as follows to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  How to back up and restore the registry in Windows XP