The CPU usage of Flex-2 15 30% when idle after upgrade to Windows 10 * contains large Images *.

Similar Questions

• Satellite A45 - the CPU usage is high and slow applications

  Hi all

  I'm trying to debug a hardware problem on my Toshiba Satellite A45. I am running Ubuntu 10.04, but I don't think that it's operating system or related software.

  THE PROBLEM: The CPU usage is high and applications slowly to a crawl after using an intensive application of memory for a few minutes, i.e. to watch a video or a game. Basically, anything that could use the screen much. If instead, I work only from a prompt, even when the application could do a lot of work, I do not encounter this problem. After stopping all applications, the CPU usage is always higher than normal (90% idle, should normally be slowed down to about 99%).

  Xorg now typically showing about 6% (normally use< 2%).="" if="" i="" at="" any="" time="" after="" this="" try="" to="" work="" in="" any="" application,="" usage="" is="" still="" bogged="" down.="" only="" a="" reset="" gets="" me="" back="" to="">

  Note: My system has always worked very well and I did not made the installation of the software or changes when it started to happen.
  However, the laptop is a 800 miles round trip at the rear of the car in a padded bag.

  DEBUG: This doesn't seem to be the RAM that I replaced the RAM and reinstall the RAM, and the problem persists. This doesn't seem to be the hard drive that I can try to run it from a Live CD (without use of HARD drive) and yet everything slows to a crawl.

  HELP: I don't know how to debug from here.
  I don't have extra pieces of hardware to make swaps.

  Any ideas more how to debug this?

  Thank you
  Grommit

  Hello

  > I am running Ubuntu 10.04, but I don't think that it's operating system or related software.
  It s interesting why you think that this may be software related issue

  I think that it is a typical software problem because the RAM and the HARD drive has been verified you have reported this in the message

  So what to say maybe some virus or malware likely to obstruct the CPU and the memory usage
  Or there is some process in the background that are not properly

  I recommend you to reinstall the Windows operating system or another distribution of Linux that runs NO Live CD, but which is installed on the HARD drive
  I m sure that s kind of the process that is disabled and crashes somewhere in the background

• "The CPU usage high" during navigation

  What"the CPU usage high" and why is it when just browsing - is harmful and how to reduce it down? Thank you

  Follow the steps mentioned in the articles below provide

  http://www.ehow.com/about_5552689_cpu-usage-high-Vista.html

  http://www.ehow.com/how_5066314_stop-100-percent-CPU-usage.html

• Satellite C650D - the CPU usage is jumping around

  I bought a Toshiba Satellite C650D 2 months ago and I used the Windows 7 that came with it, thinking that it was fine and dandy until a few days ago, he started having random lag spikes.

  At first he just happen when you watch movies (tried 4 different programs, all reinstalled the driver, scanned for malware, defragmented, you name) and then she started to occur outside the viewing of film aswell. Who did it for me, and I installed Windows XP. I did 3 times now, clean install it Windows XP. Initially, it seemed fine. For a few hours, and then it started lagging really bad, not like in Windows 7, but the CPU usage is jumping all over the boundaries between 1% and 99% at random, but there is no process to take it!

  He lags behind what I do, just open the Notepad can blow. I thought that it would work with a format clean, but no, of course the problem reoccured. It might be drivers, see problems in Windows 7 and XP are somewhat different. I'm in my intelligence ends here on what to do, whatever that is would be helpful.

  Hey Buddy,

  Looks like on your laptop is a background passes process that is causing this different and high CPU usage.

  What happens if you install Windows 7 Toshiba Recovery disk and look in the Manager of tasks? Directly after this installation, you should have a low CPU usage and stable because it s installation of Windows from Toshiba.

• Satellite P100-219: model seesaw in the CPU usage graph / wireless switch

  Has anyone noticed a trend sawtooth in the graph of CPU usage (quickly repeat that 10% performance spikes) in idle operation? Crampons disappeared after I switched the wireless (WLAN & BT) light...

  Hello

  Usually, if the 3rd program tries to connect to the WLan or the BT will increase the CPU usage. It s not easy to say why it happens because no one knows what you have installed on your laptop, or what settings unique applications have.

• How to check the CPU usage and paging using LabVIEW

  Hi guys,.

  I build an application that is used to check the CPU usage and paging using LabVIEW. How can I do?

  any help, suggestions or advice will be greatly appreciated...

  Kind regards

  Prashant

  Hello

  If you plan to build your app for Windows, you can use .NET classes. (System.PerformanceCounter), there is a simple example with LabVIEW:

  C:\Program NIUninstaller Instruments\LabVIEW 2010\examples\comm\dotnet\SimpleTaskMonitor.llb

  

  Also, you have several screws that you can use to verify information about the processor.

  

  Kind regards

• How to get the CPU usage in LabWindows using C program

  Hi all

  Please help me...

  How to get the CPU usage and the use of the RAM in LabWindows CVI 12.0 using C.

  Any help with this will be appreciated.

  Thank you in advance

  
  

• In the "CPU usage history" Task Manager, which is the length of the story

  Work Manager "CPU usage history" view which is the length of the story?

  Stephanie

  There is no time for the CPU usage history

  How reach you that conclusion?

  You can change the timespan by changing the speed! You have high, Normal and slow. The displayed time interval will vary depending on the setting. You also Pause setting, which freezes the display.

• game does not open on steam, but says its running on the CPU usage

  football manager 2011 order opening via steam as usual. but it shows that it is running on the CPU usage

  Hello

  1. what version of windows is installed on the computer?

  2. were you able to play the game before?

  3. what browser do you use?

  I suggest you to give us more information about the issue so that we can help you better.

  It will be useful.

• AppleMobileDeviceService.exe always takes 50% of the CPU usage.

  Original title: year App called AppleMobileDeviceService.exe constantly takes 50% of the CPU usage.  I'm not using iTunes.  Said Apple iI should ask Microsoft.  I use oper AX. sys.

  An App called AppleMobileDeviceService.exe constantly takes 50% of the CPU usage.  I am not connected to iTunes and my iPod is connected to my PC when this .exe runs with 50% usage.    Apple suggested that contact Microsoft.  I use oper AX. sys. Apple has suggested to contact Microsoft.

  Hi Armycyrus,

  Have you done a recent software or hardware changes to the system?

  Method 1:

  If iTunes is installed on the system, you can try to uninstall and reinstall the same and check if it helps:

  For more information, see the article:

  Remove and reinstall iTunes, QuickTime, and other software components for Windows XP

  Method 2:

  It seems to reset Winsock has solved the problem:

  For more information, see the Apple support links:

  HT3204 Apple Device Support hogging CPU, impossible to download podcasts

  Apple on Windows software: can see the performance problems and virgins iTunes Store

  Alternatively, you can try to reset Winsock and check if it helps:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  Important: The foregoing contains as follows to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  How to back up and restore the registry in Windows XP

• When I used to hit ctrl, ALT, delete, Task Manager appears. Now, just the screen CPU usage. How can I get that back for the bigger task manager, which, the CPU usage was a tab to the breast? Thank you.

  The Task Manager is now just 'CPU' because I must have hit something wrong.  I was hoping just to click on the tab use the CPU in the Task Manager, now somehow when I hit CTRL, remove alt. it shows only the CPU usage graph.

  Double-click the window border.

• CPU problem. The CPU usage is erratic and the RAM is regularly high

  CPU question

  I can't navigate with my huge memory and laptop good performance because the CPU usage is erratic and the Ram memory is regularly high. For now, 1.7Gigs is my memory on my 3 GB of ram. How can I solve this problem? My computer problems are related to the navigation.

  Hi Sean,.

  ·         Since when are you facing this problem?

  Method 1: Start your computer in safe mode to check the issue. Report of the results.

  Method 2: Run the next Fixit tool to check the issue.

  Difficulty of Windows system performance slow computer problems

  Method 3: Check to see if this article helps you.

  Optimize Windows Vista for better performance

• The CPU usage reaches 100% and the system locks requiring a hard restart on Windows Vista

  All of sudden the CPU usage reaches 100%, which makes the system dead slow and finally the system stops responding. I have to do a hard reboot to continue using the system.

  I tried to open the Task Manager to see if there are programs or services running that can consume resources and found nothing. The remains of number of CPU use, the graph to use but less than 10 years is hovering at 100%.

  I did not change my system.

  The problem appears on the two accounts that I installed on my operating system.

  I removed all the unwanted programs since the system was started.

  I have McAfee Antivirus installed for more than a year now, and the latest antivirus patches have been installed.

  Help, please.

  Thank you in advance!

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• (Redirected) Computer beeps during use. Maybe high disk or the use of the CPU usage?

  New here and new to Dell computers. 1st stop, I have a Dell XPS 13 "i7 6560u 16 GB and SSD 512. When using the computer, I get a series of 2 beeps. It seems to be related to the high use of the disc or the CPU usage. I guess my question is possible to put these notifications for a longer delay or at least decrease the volume of the beeps. I am aware that when I use one of my CSD programs to open a browser and looking for an answer to the question about what there will be times where I could get high uses a of these, that's all just annoying and not really want to turn them off entirely (option I would) I would delay having more time this will happen to until I get through this ,

  I thank you,

  Ben

  Hi w4qed,

  Please repost this in the laptop computer forum help.

  http://en.community.Dell.com/support-forums/laptop/f/3518

• The CPU usage goes up to 50-60% right when I start the computer.

  Original title: high CPU usage

  I have a pc with windows 7 64-bit, 4 GB ram, AMD Phenom II x 2 511 processor and a Nvidia Geforce Gtx 260. The CPU usage goes up to 50-60% right when I start the computer. I ran the Task Manager and there is no program using the cpu. It has nothing to do with anny viruses because I scanned the computer with two different programs. We do not have Steam and the EA download manager. What could be the problem?

  "Idle" means "doing nothing."  Windows runs the "System Idle" process when the processor has no useful to perform tasks.

  Look at the status bar at the bottom of the Task Manager and you will see that the CPU usage does NOT include the percentage for the System Idle process.

  What are the processes other than Idle System added up to 50-60%?

  I suggest that you run an online scan using antivirus ESET online--> http://www.eset.com/us/online-scanner/

  and then download, install, update and run the free MalwareBytes AntiMalware--> https://www.malwarebytes.org/ version

  I expect that the MalwareBytes Installer is clean enough, but you should pay attention when installing any software to make sure that you accept all of the pre-selected options to install other bundled applications.