Why Flash presentation retractable or not completely show preview in browser?

Similar Questions

• I use Win XP, Mozilla 29 and Flash 16.0.0.296. It says obsolete Flash but update works not-only shows Flash 11 is blocked

  That's what I see
  "Flash Player Plugin between 11.0 and 11.7.700.169 (click-to-play) has been blocked for your protection."

  Why he was blocked?

     Old versions of the Flash Player plugin are potentially insecure and unstable. All users are strongly recommended to update on our plugin check page."
  

  But the plugin check page leads to the same... How to get out of this loop?

  Because it is vulnerable to a critical attack. Flash Player 16.0.0. 305 and 13.0.0. 269 ESR are the current versions.

  Some say that the Flash Player 13.0 ESR is better for Windows XP.

  https://www.Adobe.com/products/flashplayer/distribution3.html

  https://helpx.Adobe.com/security/products/Flash-Player/apsb15-04.html
  https://addons.Mozilla.org/en-us/Firefox/blocked/

• Flash Player installation is not complete. Installer starts but stops with a connection error. Windows XP on a PC. Firefox 38.0.1.

  I have DL the installer.

  Run it from download file

  Starts to install, then stops.

  Displays a connection error.

  Do not install

  If you have not installed Service Pack 3, you may encounter problems with SSL connection.  WinXP SP2 and lower lack support for secure cryptographic systems used in 2015.

  The troubleshooting guide below should help.  Try the links to installers off line at the bottom of the guide.

  Installation problems | Flash Player | Windows

• Flash Player installation does not complete

  Help! I'm at the end of my mind! Windows 9, 32-bit. I have uninstalled older versions of Flash Player and seem to be downloading, but after waiting several hours, am always on "step 2" download. "" Manager tasks indicates install_flashplayer is a process, but never finished. Have followed the instructions on the Adobe website, security in the Middle, the ActiveX filtering out etc. Any ideas gratefully received.

  Download the Adobe Flash Player installer directly by clicking the link next and selecting "save target as."

  Flash Player ActiveX (Internet Explorer)

  Save the file to your download folder or office, where you can find it - DO NOT run again.

  Restart your system - a hard reboot - arrested, waith 30 seconds and then restart.

  Before opening anything else, find the downloaded installer and run.

• Why structures function palette is not complete?

  LabVIEW 2014 doesn't have full function of VI on the paltte, for example stacked sequence does not appear in the box structures. This seems to be an old question on other labview versions bacause have installed several versions of labview on the same PC.

  However, this structure (stacked sequence) appears under structures Mindstorm! but not on the choice of "programming".

  Is this a bug?

  Hi Lalox,

  This is a feature of the latest version of LabVIEW (right now) and has been requested by many (more experienced) exchanging ideas LabVIEW LabVIEW programmers!

  The flat sequence Structure help says:

  To create a structure of stacked sequence, place a flat structure sequence on the block diagram, with the right flat sequence structure button, then choose Replace with stacked sequence.

• Why the disk check is not complete?

  I foresaw a disk check and received a message that replaced windows cluster bad file 23773 name Windows\software\download\6EC896~\BITE.tmp, but it will not continue beyond 99% in step 4 of 5.

  Any suggestions?

  It is a Dell Insperion notebook.

  Earlier, I got the error message when you try to start in normal error Code 2000-0141, that says to remove and reinstall the hard drive. This means it needs a new hard drive?

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_126A722713F6D0D0E0401E0A55174AE6&isLegacy=true

• Presentation service is not started get: already started process: instance1 ~ coreapplication_obis1 ~ OracleBIServerComponent ~ coreapplication_obis1 message

  Hello

  My network admin has restarted the server abnormally and stop internet access from the system, where I installed OBIA 11 g. After that I started my BI services but now my presentation service will not LIVING. all services are started except service presentation:

  Following error message;

  Process pending: instance1

  ---------------------------------+--------------------+---------+---------

  IAS-component | process type.     The NEST | status

  ---------------------------------+--------------------+---------+---------

  coreapplication_obips1 | OracleBIPresentat ~ |     N/A | Down

  essbasestudio1 | EssbaseStudio |    4328 | Alive

  essbaseserver1 | Essbase |    4456. Alive

  coreapplication_obiccs1 | OracleBIClusterCo ~ |    4300 | Alive

  coreapplication_obisch1 | OracleBIScheduler ~ |    4292 | Alive

  coreapplication_obijh1 | OracleBIJavaHostC ~ |    4316. Alive

  coreapplication_obis1 | OracleBIServerCom ~ |    4308. Alive

  If I'm trying to start the service manually by using following command then, also, it is not started. I entered after a command:

  D:\Middleware\instances\instance1\bin > opmnctl startproc ias-component = coreapplication_obis1

  Now I get after message.if I try the same command again

  D:\Middleware\instances\instance1\bin > opmnctl startproc ias-component = coreapplication_obis1

  opmnctl startproc: from opmn managed the process...

  ================================================================================

  opmn id = ACLBS05:9501

  0 out of 0 process started.

  Already started process: instance1 ~ coreapplication_obis1 ~ OracleBIServerComponent ~ coreapplication_obis1

  I don't get if the process are already so why my presentation service is not started.

  Please, help me to my presentation service.

  Thank you

  Looks like your catalog is damaged. See this

  [2015 08-13 T 04: 57:23.000 - 07:00] [OBIPS] [ERROR: 1] [,] [saw.catalog.impl.read] [ecid:] [tid:] invalid element \\?\D:\Middleware\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\OracleBIApps\root\system\mktgcache\sawguidstate.atr. [[

  Leader: catalogimpl.cpp

  Online: 968

  Geographical area:

  Saw.Catalog.impl.Read

  Saw.webextensionbase.init

  Saw.sawserver

  Saw.sawserver.initializesawserver

  Saw.sawserver

  ECID:

  ]]

  [2015 08-13 T 04: 57:23.000 - 07:00] [OBIPS] [WARNING: 1] [,] [saw.catalog.impl.read] [ecid:] [tid:] error loading \\?\D:\Middleware\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\OracleBIApps\root\system\mktgcache\sawguidstate.atr []

  Leader: catalogimpl.cpp

  Online: 989

  Geographical area:

  Saw.Catalog.impl.Read

  Saw.webextensionbase.init

  Saw.sawserver

  Saw.sawserver.initializesawserver

  Then try to copy these files to some other working environment

• Firefox and Safari are not completely load some sites, but Chrome is. Why?

  Tonight, I noticed that some Web sites have been does not completely load on firefox. I tried to use Safari to see if it was a firefox problem, but he had the same problem. However, when I loaded the sites on Google Chrome it worked fine.

  I tried to reset firefox and clear cache, but it did not help so I uninstalled and reinstalled but it still doesn't load these web pages correctly. This just shows that constantly trying to load and pieces of the site are missing or broken. I'm on a Mac using Mountain Lion. I've updated the Java plug in, but it does not seem to have done anything to improve the situation.

  Alternatively, you can try to disable IPv6.

  • http://KB.mozillazine.org/Error_loading_websites

  You can try to reset (power off / on) of the router.

• Since the Windows 10 update, Adobe Reader XI and Microsoft Edge forms are not complete when opening a Web site.  Why should I register to my computer before can fill them?

  Since the Windows 10 update, Adobe Reader XI and Microsoft Edge forms are not complete when opening a Web site.  Why should I register to my computer before can fill them?

  Hi kay3452,

  Microsoft Edge is not compatible with the Acrobat/Reader plugins. Please try other web browsers.

  Kind regards

  Nicos

• WHY can I not check FLASH PLAYER ON SAMSUNG NOTE 8.0

  WHY can not INSTALL FLASH PLAYER ON SAMSUNG NOTE 8.0 l

  Because it uses the Android operating system and there is no more Flash Player for Android and there will be another. Android is so more comaptible with Flash Player. Flash content playback is very non-rational processor and it drains your battery, also shorten the life of it. Android (Google) recommended "The Dolphin" or "Puffin" as your browser if you need to display Flash content with a motive under Android. They are both free in the GooglePlay store. These browsers use the rendering of the 'server-side' to reduce the load on the device.

• Flash player will not completely download!

  Please help, I tried several times to uninstall/reinstall Adobe Flash 10, but it will get ot 100% and not complete when I'm going to close the window, it says "want to stop the download. My system is Windows 7, Intel Core, 32-bit OS. I stopped my antivirus and disarmed the blocker. My guarantee is set for medium.

  Any help would be greatly appreciated.

  You can try this: Goto the C:\Windows\System32\Macromed\Flash folder and click on your FlashUtil10e.exe may 9 which should be updated for you

  Message edited by Jochem van Dieten

• Why Flash Player does not support Windows Vista 64-bit?

  Why Flash Player doesn't support Vista 64-bit?

  Hello

  The answer must come through Adobe.

  Flash Player Help / Flash Player | 64-bit operating systems
  http://helpx.Adobe.com/Flash-Player/KB/Flash-Player-64-bit-operating.html

  Adobe - Support
  http://www.Adobe.com/support/

  Adobe - communities
  http://www.Adobe.com/communities/

  Adobe - Forums
  http://forums.Adobe.com/index.jspa

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When runing the system restore, I get a message says, "System Restore did not complete Sudessfully" the reason why it gives States "an unspecified error occurred during system restore.

  When I was runing the Sytem Restore I get a message that says "System restore was not completed successfully" the reason he give said "an unknown error occurred during system restore.

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• Try to get a wireless remote control to work with Flash presentation... Help!

  I know almost nothing about Flash or Powerpoint.  They gave me a Flash presentation that I need I want to show at meetings using my wireless remote control, but I can't seem to move forward and backward between slides (works very well using the arrow keys on the keyboard to laptop - Windows XP Pro).  The remote works fine with Powerpoint presentations, so I don't know the remote is ok.  Is there some setting/order I have to run my Flash presentation with my remote, or do I need a special remote control?  I have already spoken to the remote support (Keyspan/TrippLite) and they were totally unknown wirh Flash and said simply that their device works with Powerpoint, as announced, which was true, but they could not help me with Flash presentations.  There, can someone help me?  Thank you very much!

  Thanks a lot for all the help.  I see a lot of situations where I can use the functions available through the use of SharpKeys2 key mapping, as well as a few other programs I 'discovered' during my travels recent (KeyTweak + AutoHotKey).  Even better for my situation here, I just got a more advanced model Keyspan remote (PR-Pro3) what Flash handles submissions very well - I have no idea why - and nor their tech support, apparently.  Anyway, the PR - EZ1 will come back to Newegg and I'm fortunately wireless practice of my script for my Flash presentation - working remote in hand!  Take care.

• Portege Z830 - Windows restart issue - it does not completely restart

  Although I now use 8.1 this problem has occurred with previous versions of Windows.

  When I click on restart, the machine closes as expected, but does not restart completely.
  The flash Toshiba screen does not appear, so that the Windows logo.

  At this point, it crashes and the fan accelerates at full rate, with only the logo on the screen.
  The version of the BIOS is Toshiba 3.90.
  8.1 setting often issues calls for a restart and I would be happy to not always having to do it manually.

  Thanks in advance

  Windows 8.1 does not perform a full stop down by default.
  It access the hybrid stop mode.
  I think that you should just disable this mode in Windows power options
  Maybe it would improve the functionality of the system s notebook.

  Here is a statement that shows you how to do this:
  [Make a full stop in Windows 8 or 8.1 Win | http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm]