Why getDBTransaction (.createPreparedStatement) is not recognized even after the import of the ApplicationModuleImpl?

Similar Questions

• Windows keeps refreshing. Will not stop even after the resumption of the plant.

  A week ago I decided to test my windows aero desktop number. It was gray with a 4.0 remained to a 4.0. After the test, all operable Windows I keeps refreshing. Content not be refreshed but the fact of the shell (if necessary). If I drag the window it will jump to where I started dragging it since. No one knows how to fix?

  P.S. I did a cover of the factory to try to solve, and it did not work.

  Have you also all the updates and service packs - they had erased at the resumption of the plant and must be reinstalled at all.

  You can get in trouble with your device drivers (those on the factory recovery disc may be obsolete).  Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get updates for your video card and monitor at least and all the others you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  If it does not, it could very well be a real hardware problem (since dismissed pretty much factory relocation a software problem, except for updates unless you have already done as well).  Here's how to do a little troubleshooting on your own equipment:http://elephantboycomputers.com/page2.html#Hardware_Tshoot.  After that, I would either return it to the manufacturer for repair or find a well known local computer repair shop to diagnose and repair (or replace) the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• USB and a targus wireless mouse does not work, even after the help of MS tech.support

  Microsoft Tech. checked my pc online to see if I could connect my Targus mouse and its usb device. He said that I can. I still can't activate it

  Hi DebraKennedyUP,

  1. did you last changes made on your computer before the show?

  2. What is the operating system installed on your computer?

  3 - is the same mouse work on different computers?

  Perform the following troubleshooting steps:

  Method: 1

  Configure the computer to clean boot and check how it works.

  To configure the computer clean boot, follow the steps in the below link:

  How to perform a clean boot

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Method: 2

  Run the troubleshooter of material to find exactly the problem.

  Open the hardware and devices Troubleshooter

  Method: 3

  Also, proceed as shown in the following link.

  Hardware devices do not work or are not detected in Windows

  Method: 4

  I suggest you to update the drivers and check how it works.

  Updated a hardware driver that is not working properly

• FLA, the size of the file is too big and will not reduce even after the removal of assets

  I loaded a png sequence in a FLA file. This makes the huge file, so I decided to remove them. However, this has not reduced the size of the DFL. I checked the library and deleted the PNGs with no luck. I even deleted all forms of asset library and deleted all the content of the scene and the timeline, but the FLA is still almost 1 GB. How can I fix it!

  I think that there is another bug in Flash.

  I don't know who marked this as "right answer", but he did not work for me!

  I took a whole new folder full of JPGs and then tried the above suggestion. Then for good measure, deleted ALL the content of the FLA file and emptied the library. I tried and then clear the Cache of publish and save as. The FLA file (empty) is always greater than 50 MB!

• Windows search does not start even after the execution of my fixit

  I am running Windows XP, windows search is in my startup folder.  The bar indicates "expects to receive indexing status" / when I try and open start-all programs-windows search I always get error popup Windows Search is not running. To start it, click the start menu... "what I did of course everything.  I tried the Mr Fixit, but she comes back with "not fixed".  Help - please!

  Try going into the service by clicking Start---> Run, type services.msc, click ok. Scroll down to see if windows search is enabled.   You can also check in Control Panel, add/remove programs to see if you have research above windows 4.0 installed.

• BlackBerry Smartphones Internet BB not worrking even after the seizure of the service

  
  

  Found the solution for this if you are a Vodafone customer make sure you have your active Vodafone Live only then your advantage would be uppercase for Blackberry. Pierrick took me 1 month to understand this. And no customer management had a solution.

• Table tree icons has not erased even after the application of CSS

  Hello
  
  I need to change the table tree developed and reduced and the head node icon.
  
  Leaf node icon happens correctly, but the other two are misapplied.
  
  In the background the old default image becomes redered and in addition to this the newly given image is displayed.
  
  Here are the .css declarations used to change icons.
  
  AF|treeTable::expanded-icon{content:URL(/org/CalWIN/UI/superweb/image/yellowBlueMarker-minus_trans.gif);
  background: no ;}
  AF|treeTable::collapsed-icon{content:URL(/org/CalWIN/UI/superweb/image/yellowBlueMarker_trans_plus.gif);
  {Background: none}
  AF|treeTable::leaf-icon{content:URL(/org/CalWIN/UI/superweb/image/blueCircleMarker_trans.gif);
  {Background: none}
  
  Can anyone suggest a solution for this.
  
  Thank you
  Praveen.

  Hello

  If you extend an existing skin, try - tr - inhibit: all;

  AF | treeTable: {expanded icon

  -tr - inhibit: all;
  Content:URL(/org/CalWIN/UI/superweb/image/yellowBlueMarker-minus_trans.gif);
  Background: none;
  }

  in case there is a problem with the legacy

  Frank

• Why some web pages become corrupted even after I re - install Firefox even when I don't save my favorites?

  Why some web pages become corrupted even after I re - install Firefox even when I don't save my favorites?

  Do you mean that you can attach a screenshot that show what distortion?

  • http://en.Wikipedia.org/wiki/screenshot

  Use a type of compressed as PNG or JPG image to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).

• Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

  Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

  I'll try not to waffle too guys, so here's...

  Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

  But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

  After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

  A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
  The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
  Tried a system restore
  Tried to reinstall itunes

  When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

  Thank you comrades, cordially, Freddy frustrated. :)

  Another said I should go to Device Manager, uninstall all the USBs and restart.

  Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

  I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

  Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

  I guess that you don't see the error messages in Device Manager or you must declare them.

  You can uninstall all USB devices that do not exist as follows:

  • Open a command prompt window (start > run > cmd > OK)
  • Enter the following command and press enter

  Set devmgr_show_nonpresent_devices = 1

  • Start the Device Manager by typing the following in the same command prompt window

  devmgmt.msc

  • In Device Manager, click the view menu and select "Show hidden devices".
  • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
  • Reboot (with the iPhone NOT connected).

• USB not recognized - even when there is no device at all (Windows 7, Pavilion dv7)

  For a few days now, I get the message

  "USB device not recognized: one of the USB devices attached to this computer is not working properly." The device has not been recognised "."

  He keeps popping up in my right corner below, every 5 seconds if I don't click it. When I click on the message, I get a list of devices (ports) are available. There is an "unknown device". Maybe it has something to do with the (biometric) finger scan? This has not worked very well lately...

  Even when there is no single USB device installed (normally, I have a mouse and a Targus laptop cooling mat installed as USB devices), it keeps popping up. I tried to remove the USB port from the list (or uninstall) in the remote control, but it seems that it keeps happening.

  I got it all of a sudden, I have nothing specific to has not logged any strange devices (except for a spotlight on exit external screen, but this has nothing to do with USB). I also hear the sound for the connection / disconnection USB devics randomly when I'm on my laptop.

  Someone has an idea?

  Thank you

  HP Pavilion dv7 Notebook PC
  LE902EA #UUG

  Windows 7 64 bit

  The solution can be found here

• USB not recognized - even when there is no USB devices at all the

  For a few days now, I get the message

  "USB device not recognized: one of the USB devices attached to this computer is not working properly." The device has not been recognised "."

  He keeps popping up in my right corner below, every 5 seconds if I don't click it. When I click on the message, I get a list of devices (ports) are available. There is an "unknown device". Maybe it has something to do with the (biometric) finger scan? This has not worked very well lately...

  Even when there is no single USB device installed (normally, I have a mouse and a Targus laptop cooling mat installed as USB devices), it keeps popping up. I tried to remove the USB port from the list (or uninstall) in the remote control, but it seems that it keeps happening.

  I got it all of a sudden, I have nothing specific to has not logged any strange devices (except for a spotlight on exit external screen, but this has nothing to do with USB). I also hear the sound for the connection / disconnection USB devics randomly when I'm on my laptop.

  Someone has an idea?

  Thank you

  HP Pavilion dv7 Notebook PC
  LE902EA #UUG

  Windows 7 64 bit

  I have disabled the root hubs, figured out that we caused now my mouse and other USB physical led to no longer working and that was allowed again.

  The one who gave the error message is now disabled and if the error message is no longer present.

  Result: (built in) cyberlink youcam and biometric no longer work. But at least the annoying message disappeared, so I guess I can live with that.

• USB stick not recognized even on other computers

  Hey-

  A few days ago I plugged in (USB) flash drive of 512 MB on my desktop Dell (Windows Vista), and that bubble "USB device not recognized" come at the bottom of my screen. I tried to put in the other USB ports, ports on different computers and the same message appeared. This device seems not more in Device Manager (do not even like a disc without a name). This worked perfectly well before flash player. Is there a formatting problem that must be corrected in my USB key, or what is the problem?

  Hello

  If the drive is not recognized at all then you cannot format it no more. Disks wear and/or
  go wrong. Most manufacturers of Thumbdrive have Support FAQ, which 'could' help.

  How to format the USB drive and memory with NTFS
  http://www.online-tech-tips.com/computer-tips/format-USB-NTFS/

  Format a Flash DRIVE with the NTFS file system
  http://www.pctipsbox.com/format-a-USB-drive-with-NTFS-file-system/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• iTunes will not open even after reinstall on windows 7

  iTunes will not open even after reinstall on windows 7

  Hello mamaKAT,.

  Read the Apple article listed here:
  iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues
  http://support.Apple.com/kb/TS1717

  If this does not help, you should contact Apple support or post in the Apple discussion forums.
  http://discussions.Apple.com/category.jspa?categoryID=149

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• My series of MC CS5.5 not accepted even after installation with FB 4.6

  Hi all

  My CS5.5 MC serial number is not accepted by FB 4.6 even after the start it here as suggested test mode: http://kb2.Adobe.com/CPS/924/cpsid_92402.html

  Can someone help me?

  I am happy to know that.

  Can you please mark this message as answered?

• Not recognized, yet all the numbers!

  My printer HP Photosmart C4400 all-in-One Series, model HP Photosmart C4480 has a number more than talking about the page How To and the video.

  Yes, the printer is actually in production (2008?) but I've only used out-of-the-box for 4 months in 2012 and then he is back in stock.  I just he carried out of the box, about a year later and of course had to install new ink.

  I wanted to check the printer was recorded (it is) and see if there are new driver updates, etc..

  and try to find out if it is to be on the noisy side is correct.

  I also need to know why, when I choose 'Set up', I got a window saying my device is not recognized, even if it is here, in the computer.  I can see it in the dock (MacBook Pro).  I wanted to do once more the printer by default - I had been driving on a friends through his cannon.

  Sticker on the bottom of the printer, left of the connecting cable has a number of "CN946M"... "more the barcode and the words"product of China ". On the right side of this vignette even longer numbers, which reads Q8383-6... [32].
  Then, on the bottom, to the front there is ANOTHER sticker that, aside from logos miners, gives the "regulatory model number", read "SNPRB-00"... ' and another number, the number of the product warranty, also begins with Q838, BUT this is different: "Q8388A.  NOTE: the other number (above) read 8383
  Above this vignette is a barcode with "Q8388 6"... "Still has another, different number and the words"Product of Singapore"
  On my 'Start Here' literature, there is a barcode at the bottom right that reads in part Q8383-9...

  then, friends of HP, which number is which?  And this a C-4400 or a C4480 printer?  And given that the warranty has expired for a long time even if its use is only 6 months old and the fact that I'm not "with it" with all the techno jargon (I had to seek that meant :-) OCR I would also like to know where to go (the lists are so long) for easy to request assistance.

  Thank you!!!

  Hi Cloudrowdy,

  I know by looking at the stickers on the printer can sometimes feel like watch the alphabet soup.

  Your product number is Q8388A, the printer is the all-in-one HP Photosmart C4480. The c4480 belongs to the serious c4400, I call the c4400 family and thinking about the c4480 as a cousin.

  The prescribed number is just a number of marketing necessary to make you worry about. The only other number may never need to is the serial number. Because the printer was made in China, the serial number will begin with CN and you should never the first 10 digits. I say this because it can be 14 digits in the serial number. Once again, alphabet soup! For security, I do not recommend that you never post your serial number on a public forum.

  Here is a link to HP Photosmart C4480 all-in-one printer support.

  This link will give you information for:

  • Drivers
  • Solve a problem
  • Getting started
  • How
  • Product information
  • User guides

  I hope it's useful. If there is nothing else or anything more specific, you want to help do not hesitate to inform MB.