Windows search does not start even after the execution of my fixit

Similar Questions

• Windows XP does not start even in safe mode. He just continues to repeat the start-up process unsucessfully.

  I had to force my computer last night.  Now the computer is turned on, I see Windows XP, then the computer passes the screen advising me the computer was closed and asks me if I want to start in safe, regular or the last usable parameter is known.  Unfortunately, they are all take back me to the same screen after a minute and the whole process starts again and again and again.  It does not start in same mode using F8 or F12.  Any advice?  Computer is an older laptop, but it worked great the day before.  I don't have add new programs.  I get the Toshiba screen and XP logo, but nothing beyond.

  Hello

  Perform a repair of Windows XP installation to fix the problem.

  For instructions, see the following article:

  Perform a repair Installation

  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx

• Satellite A210-199 does not start successfully after the BIOS update

  Hello

  I've got Sat A210-199.
  Yesterday I updated the BIOS, and after that problems occurred:

  While restarting my computer does not start. When I enter the BIOS after a while, it shuts down.
  I guess all this because the temperature of the CPU:

  When I do nothing it is 77 C. I don't think it's normal: (.)
  Computer is very recent, so it's probably not dust inside. And it's so hot from the start, but after the new BIOS, something bad happens.

  Why this temp is so high?
  There is no any process background or something.
  Is this normal?
  And what about this new BIOS?

  To be honest, something like this should not happen. I really don't understand why this is happening. I have updated the BIOS on friends A200 and mine P200 and everything works fine. Here on this forum we can only speculate on this issue, but what you need exactly's professional opinion.

  This probably not help but install recovery image and check with the factory settings. Make sure you also on the lower side cooling fan is not blocked and the laptop can be cooled properly. If the problem persists, you should contact the nearest authorized maintainer and clarify this issue.

  Sorry, but I don't really know what you can do in this situation. I don't see any other way to solve this problem.

  Good luck!

• My Windows Vista laptop does not start successfully after the upgrade to SP1

  I use Windows Vista Home Premium. I've updated my laptop with Vista service pack 1. After that my laptop will not start, it displays a message saying "Service Pack did not install. Restoration of the changes. Do not turn off computer. "after windows loading and then the computer restarts and the same thing repeats. I also didn't get a vista CD or a restore with my laptop CD. I tried a solution anywhere, but I couldn't find one. Please help me quickly because I do all my work laptop and I don't don't want lose my files.

  Perhaps you should review this KB

  Things to know before you download Windows Vista SP1
  http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx>

  Information about Windows Vista SP1
  What you need to know before you install Service Pack 1
  http://support.Microsoft.com/?kbid=936330>

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366>

  How to uninstall Windows Vista SP1 as a troubleshooting step
  http://support.Microsoft.com/kb/948537>

  Windows Vista Service Pack 1 is not available for installation from Windows Update and is not offered by automatic updates:
  http://support.Microsoft.com/?kbid=948343>

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx>

  Windows Vista Service Pack 1 standalone installation) (KB936330)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en>

  Go to your retail store, they should have the disk recovery for you or you need to go to your manufacturer directly because the manufacturer is best qualified to support the software that the manufacturer has installed on the hardware, provide your serial number and order the CD on their part. I bet they arrange an expedition to the France and tax treatment for it, but should not be too much.

  Note: The manufacturer was required to provide a way to reinstall Windows. If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).

• Windows does not start until after the second day to have.

  I just got my laptop Toshiba yesterday with Windows 7 above. I used it for about 4 hours, when I'm done I turned it off by saying it close here go to start > stop. Before putting the laptop on I saw the lights on so I pressed the manual to close button, at the last second, I saw he said something as 341 on 356 updates installed, do not turn off the computer. I don't think a lot because I was tired so the next morning, I try to turn on my laptop and it stops after the Windows 7 load loading animation, and all I have is a black screen with a mouse. I tried to run in safe mode, same thing black screen with my ability to see where is my mouse.

  Contact Toshiba support under your warranty. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Computer hung over the Windows, restarted, update now it does not start even with the installation CD, Get blue screen with the stop message.

  Hi, I installed a Windows update when my computer froze, so I turned it off and back on, now I can't even boot to the installtion disk supplied with the computer. When I hit F8 reapeatedly and select one of the available options, the computer contiually restarts and will not even go into safe mode. I tried hitting ctrl-alt-del, which brings me just for the system configuration menu. I even tried a software that is supposed to start any computer with any problem, and I get the same results I get with the installation CD. (Blue screen with error message: STOP 0x0000c1F5 (0x00000000, four times).) I can't do anything with it, can you help me!

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly understand exactly what happened when you tried this update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Phone does not start until after the demotion to 4.4.4

  Hello
  I have D5803 running 5.1.1 and I wanted to downgrade to 4.4.4.
  I followed this link:

  http://Forum.xda-developers.com/Z3-c...d5833-t2906706

  and flashed 4.4.4 (23.0.1.A.5.77 - unbranded - USA (1289-7524)) using flashtool.

  Flashing has finished successfully, according to this:

  28/01/2015 15:01:06 - INFO - Flashtool Version 0.9.19.0 built on 29/07/2015 12:00
  28/01/2015 15:01:06 - INFO - execution of search strategies to find the proxy selector
  28/01/2015 15:01:06 - INFO - no proxy not found for IE. Try the next
  28/01/2015 15:01:06 - INFO - strategy firefox could not try a next: installation of Firefox not found
  28/01/2015 15:01:06 - INFO - no proxy not found for java. Try the next
  28/03/2015 15:03:01 - INFO - synchronization of devices on github
  28/03/2015 15:03:01 - INFO - repository cloning devices
  28/03/2015 15:03:18 - NEWS - synchronization of finished devices.
  28/03/2015 15:03:22 - NEWS - device connected with USB debugging off
  28/03/2015 15:03:22 - INFO - line devices of 2011, make sure that you are not in MTP mode
  28/05/2015 15:05:22 - NEWS - selected Bundle for Sony Xperia Z3 Compact (D5803). FW release: 23.0.1.A.5.77. Customization: U.S.
  28/05/2015 15:05:22 - NEWS - preparation of files for flashing
  28/05/2015-15:05:39 - INFO - please connect your device in flashmode.
  28/06/2015 15:06:01 - INFO - disconnected device
  28/06/2015 15:06:37 - INFO - appliance connected with USB debugging off
  28/06/2015 15:06:37 - INFO - line devices of 2011, make sure that you are not in MTP mode
  28/06/2015 15:06:47 - INFO - disconnected device
  28/07/2015 15:07:15 - NEWS - device connected with USB debugging off
  28/07/2015 15:07:15 - INFO - line devices of 2011, make sure that you are not in MTP mode
  28/07/2015 15:07:27 - NEWS - disconnected device
  28/07/2015 15:07:50 - INFO - peripheral connected flash mode
  28/07/2015 15:07:50 - INFO - opener for R/W
  28/07/2015 15:07:50 - INFO - information on the playback device
  28/07/2015 15:07:50 - INFO - ready phone to flashmode operations.
  28/07/2015 15:07:50 - INFO - partition opening TA 2
  28/07/2015 15:07:50 - INFO - current device: D5803 - YT9114XJ39-1289 4696_R5C - 1285 - 6521_23.4.A.0.546 - GLOBAL - LTE_23.4.A.0.546
  28/07/2015 15:07:50 - INFO - partition of YOUR closing
  28/07/2015-15:07:50 - INFO - start flashing
  28/07/2015 15:07:50 - INFO - loader.sin treatment
  28/07/2015 15:07:50 - INFO - verification header
  28/07/2015 15:07:50 - INFO - flashing data
  28/07/2015 15:07:51 - INFO - Loader: S1_Root_9c84 - Version: MSM8974AB_22 / Boot version: S1_Boot_MSM8974AC_LA3.0_L_36 / Bootloader status: ROOTABLE
  28/07/2015-15:07:51 - INFO - the transfer buffer size: 262144
  28/07/2015 15:07:51 - INFO - delivery of start-up analysis
  28/07/2015-15:07:51 - INFO - found a model session. Use: C:\Users\Moshe\.flashTool\devices\D58XX\default.fs c
  28/07/2015 15:07:51 - INFO - partition opening TA 2
  28/07/2015 15:07:51 - INFO - TA unit writes 00002774. Value: [01].
  28/07/2015 15:07:51 - INFO - partition of YOUR closing
  28/07/2015 15:07:51 - INFO - partition processing - image.sin
  28/07/2015 15:07:51 - INFO - verification header
  28/07/2015 15:07:51 - INFO - flashing data
  28/07/2015 15:07:51 - INFO - partition opening TA 2
  28/07/2015 15:07:51 - INFO - partition of YOUR closing
  28/07/2015 15:07:51 - INFO - partition opening TA 2
  28/07/2015-15:07:51 - INFO - write YOUR unit 0000084f. Value: [1A, THIS, 1 d, 00, 01, 00, 04, 05, 00, 02, 02, 08, 00, 10, 03, 00, 02, 04, 02, 05, 00, 01, 03, 02, 00, 10, 05, 00, 03, 03, 05, 00, 10, 0a, 00, 02, 00, A9, 09, BE, BA, A9, 09, 00, 00, 04, 00, 03, 00, 02, 00, 00, 00, 04, 04 B0, 04, 0E] 00, 06. 00, B8 0B 01, 4 B, 00, 00, 00, 03, 96, 00, 2 C, 01, 03, 09, 00, 00, 01.
  28/07/2015-15:07:51 - INFO - write YOUR unit 000008fd. Value: [00]
  28/07/2015 15:07:51 - INFO - partition of YOUR closing
  28/07/2015 15:07:51 - INFO - partition opening TA 2
  28/07/2015 15:07:51 - INFO - dbi_S1_Boot_MSM8974AC_LA3_0_60_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID12-OEM1-AID4-DEBUG00_S1-BOOT-LIVE-9C84-0004-MMC.sin treatment
  28/07/2015 15:07:51 - INFO - verification header
  28/07/2015 15:07:51 - INFO - flashing data
  28/07/2015 15:07:51 - INFO - treatment emmc_appsboot_S1_Boot_MSM8974AC_LA3_0_60_AID_4_PLA TFORM-MSM8974AC-LIVE-HWID007B40E1-SWID09-OEM1-AID4-DEBUG00_S1-BOOT-LIVE-9C84-0004-MMC.sin
  28/07/2015 15:07:51 - INFO - verification header
  28/07/2015 15:07:51 - INFO - flashing data
  28/07/2015 15:07:51 - INFO - rpm_S1_Boot_MSM8974AC_LA3_0_60_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID0A-OEM1-AID4-DEBUG00_S1-BOOT-LIVE-9C84-0004-MMC.sin treatment
  28/07/2015 15:07:51 - INFO - verification header
  28/07/2015 15:07:51 - INFO - flashing data
  28/07/2015 15:07:52 - INFO - s1sbl_S1_Boot_MSM8974AC_LA3_0_60_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID65-OEM1-AID4-DEBUG00_S1-BOOT-LIVE-9C84-0004-MMC.sin treatment
  28/07/2015 15:07:52 - INFO - verification header
  28/07/2015 15:07:52 - NEWS - flashing data
  28/07/2015 15:07:52 - INFO - sbl1_S1_Boot_MSM8974AC_LA3_0_60_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID00-OEM1-AID4-DEBUG00_S1-BOOT-LIVE-9C84-0004-MMC.sin treatment
  28/07/2015 15:07:52 - INFO - verification header
  28/07/2015 15:07:52 - NEWS - flashing data
  28/07/2015 15:07:52 - INFO - tz_S1_Boot_MSM8974AC_LA3_0_60_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID07-OEM1-AID4-DEBUG00_S1-BOOT-LIVE-9C84-0004-MMC.sin treatment
  28/07/2015 15:07:52 - INFO - verification header
  28/07/2015 15:07:52 - NEWS - flashing data
  28/07/2015 15:07:53 - INFO - partition of YOUR closing
  28/07/2015 15:07:53 - INFO - partition opening TA 2
  28/07/2015 15:07:53 - WARN - cache is excluded from the bundle
  28/07/2015 15:07:53 - WARN - apps_log is excluded from the bundle
  28/07/2015 15:07:53 - INFO - kernel.sin treatment
  28/07/2015 15:07:53 - INFO - verification header
  28/07/2015 15:07:53 - INFO - flashing data
  28/07/2015 15:07:54 - INFOS - fotakernel.sin treatment
  28/07/2015 15:07:54 - INFO - verification header
  28/07/2015 15:07:54 - INFOS - flashing data
  28/07/2015 15:07:56 - INFO - partition of YOUR closing
  28/07/2015 15:07:56 - INFO - partition opening TA 2
  28/07/2015 15:07:56 - WARN - userdata is excluded from the bundle
  28/07/2015 15:07:56 - INFO - system.sin treatment
  28/07/2015 15:07:56 - INFO - verification header
  28/07/2015 15:07:56 - INFO - flashing data
  28/12/2015 15:12:43 - NEWS - treatment amss_fs_1.sin
  28/12/2015 15:12:43 - NEWS - verification header
  28/12/2015 15:12:43 - NEWS - flashing data
  28/12/2015 15:12:43 - NEWS - treatment amss_fs_2.sin
  28/12/2015 15:12:43 - NEWS - verification header
  28/12/2015 15:12:43 - NEWS - flashing data
  28/12/2015 15:12:43 - NEWS - treatment amss_fsg.sin
  28/12/2015 15:12:43 - NEWS - verification header
  28/12/2015 15:12:43 - NEWS - flashing data
  28/12/2015 15:12:44 - INFO - partition of YOUR closing
  28/12/2015 15:12:44 - INFO - partition opening TA 2
  28/12/2015 15:12:44 - WARN - 2212 unit not found in the set
  28/12/2015 15:12:44 - INFO - partition of YOUR closing
  28/12/2015 15:12:44 - INFO - partition opening TA 2
  28/12/2015 15:12:44 - INFO - partition of YOUR closing
  28/12/2015 15:12:44 - INFO - partition opening TA 2
  28/12/2015 15:12:44 - WARN - 2404 unit not found in the set
  28/12/2015 15:12:44 - INFO - partition of YOUR closing
  28/12/2015 15:12:44 - INFO - partition opening TA 2
  28/12/2015 15:12:44 - INFO - partition of YOUR closing
  28/12/2015 15:12:44 - INFO - partition opening TA 2
  28/12/2015 15:12:44 - INFO - treatment elabel-D5803 - row_2014010151307.1_23.0.1.A.5.77.sin
  28/12/2015 15:12:44 - INFO - verification header
  28/12/2015 15:12:44 - INFO - flashing data
  28/12/2015 15:12:46 - INFO - partition of YOUR closing
  28/12/2015 15:12:46 - INFO - partition opening TA 2
  28/12/2015 15:12:46 - INFOS - unit TA written 00002725. Value: [32, 30, 31, 35, 2D, 30, 38, 2D, 32, 38, 20, 31, 35, 3, 31, 32, 3, 34, 36, 00]
  28/12/2015 15:12:46 - INFOS - unit TA written 00002774. Value: [00]
  28/12/2015 15:12:46 - INFO - partition of YOUR closing
  28/12/2015 15:12:46 - NEWS - closing session flash
  28/12/2015 15:12:46 - INFOS - flashing over.
  28/12/2015-15:12:46 - INFO - please unplug and start your phone
  28/12/2015-15:12:46 - INFO - for flashtool, Sources unknowns and debugging must be enabled in phone settings

  Tried to turn on the unit, but he comes to the purple screen, freezes and reboots itself constantly. I can't even turn the phone off.

  What should I do?

  Thanks in advance.

  @ryanjg11

  Re-download flashtool and the file of the ftf > charge the phone for an hour about > press and hold the power & volume 10 seconds > repeat the decommissioning process

  https://talk.sonymobile.com/T5/Xperia-Z2/how-to-manually-update-downgrade-root-2014-Xperias/TD-p/593...

• Windows 7 does not start directly on the desktop

  Hi guys,.

  Need your help on this one... .my computer runs windows 7 Home premium 64-bit, I just installed VMware workstation 7.1. Problem is this

  Before installation of VMware, when I turn on my computer, it starts directly on the desktop but now it starts until the windows login screen where I choose me as the user (Administrator) after having chosen only then it opens a session on the desktop. Please, keep in mind, there is only 1 user account created for this computer and it's me... what could be the problem? I don't want that... I want windows to load directly on my desk after turning on my computer.

  I didn't mingle with the settings under VMware before asking you guys... as I am a first time user of VMware.

  Would appreciate any help a little. Thank you

  Workstation creates a user account for its own use. Even if this account is hidden (that is why you don't see on the login screen), it always results in that there is more than one account is activated, which in turn disables the automatic connect feature. You can reactivate autologinby following the instructions here:

  http://support.Microsoft.com/kb/315231

• Help! VM does not start successfully after the conversion of Server VMware ESXi 4.1

  Hi, I have install my first server ESXi, everything seems OK and stable. Had a few PtoV machines, but to start I thought I propose our only current VM from VMWare server on our ESXi server.

  The VMware host is Win2003/32 running VMware server 1.0.6 and the prompt is also Win2003/32. I shut down the VM, installed the stand-alone converter on the VMware host and let it do it's thing. Successfully completed and took 20 minutes.

  When I try to start the virtual machine of the ESXi server, it looks OK, but hangs on "Application Startup Scripts", possibly the login screen appears, but then I get messages from "Remote RPC server not available" when you try to open an RDP session. A local login hangs right on the application of personal settings.

  Network everything seems fine, can ping the VM, etc.

  May not work on why the virtual machine should start any differently? Any ideas, anyone please. I am new to ESXi and migrate the virtual computer, but have used VMware Server a lot in the past.

  All advice appreciated...!

  That's good news.

  Which explains, normally, you must do the VMTools upgrade, then the virtual machine hardware, so if the converter upgrades the equipment, the order is bad. Of course, it is recommended to upgrade the hardware to ver 7. So now that it works you can improve the tools and then the vHardware. It might be interesting, if you have enough resources on the ESXi host, make a clone to the virtual machine and the test on the clone in a State (disconnect vNIC) offline.

  Please allow Points if it is useful

• Windows 8 will not start even with the CD after uninstalling Linux

  Hi, I am currently faced with problems with my Dell Inspiron with Windows 8 3520 is installed. I had been dual-boot it with Linux Mint for a while with no problems until I decided to go completely back using Windows for convenience.  As I had installed Linux by creating a partition I followed online guides to remove the partition on which it was found, and expand the partition holds Windows to its original size. This seemed to go off without incident, until I tried to delete Grub and got to the start of the back straight to Windows computer. I followed a couple of different guides without result and finally ran a program called Boot Repair that just make things worse. After you run the program, my computer began to start directly on a screen of recovery with the error message:

  Boot your pc configuration data is missing or contains errors
  File: \EFI\Microsoft\Boot\BCD
  Error code = 0xc000000f

  After that happened, I called Dell and pushed them to send a disk of Windows 8 for me, so I could try a clean reinstall, I thought I'll fix it. Unfortunately it allows me to boot the disk. Everytime I try (when entering the BIOS and selecting the CD drive to boot from the disc) I get a message saying missing operating system, along with various things I can provide if required, and ending in asking me to insert the bootable media in the selected drive, press which just repeated the same message again. I ' v read on various fixes online without result, most who ask me to change the CD in first priority which I can't do is not listed as an option in the menu accessed by pressing F2 BIOS. I tried to add my CD drive option, but when I click in it, instead of getting the readers of CD or something like that, I get a menu called select Media Driver with options like this:

  WDC WD10JPVT-75A1YTP - Partition 1

  the only difference between them being the partition to which they are assigned, 1, 2, 4, 5 and 6. If I press on enter on any of this that it brings me to another menu called select media with a variety of different options, which change depending on the partition that I chose, which none means nothing to me. I don't know enough to try anything more, and even people at Dell seem to be at a loss. Any help would be much appreciated because I am completely lost at this point and this is my first laptop.

  Hello

  I'm not 100% sure the disks that you actually... The drive set to restore your computer to the factory should be at least 2 or 3 DVD...

  You can reinstall windows only... which, I imagine, would solve the immediate problem.

  Delete the partition with your old windows 8 on this... Don't you say that you developed it in the first partition or something... There may be a small 300 MB partition as the first and possibly a 30 GB or more, depending on the order in which Dell installed their...

  Go by your memory as to the size of the partition that you expanded 8 Win...

  The thing with reinstalling windows just is that you do not have a Dell preinstalled stuff.

  Then you would not be able to do a full restore to factory...

  Manufacturers have made significant changes as to how it's done with Win 8... as there are now several types of Bios...

  You really can't find worse off than you are now.

• Does not start successfully after the installation of updates.

  My sister has installed about 16 updates to windows on his computer. For some unknown reason after these updates, the police on the websites was different (a bit pixelated). She could not know how to solve this problem otherwise that restore to before the update. Then she started to install updates in the sections. She installed upgrading Cumulative security for Internet Explorer 8. He said she needed to reboot to complete the update, so she hit the button to restart. It began to restart and but just sat there for about 8 minutes approximately. She hit the power button to turn it off and then turned back on. The windows icon appeared and the fully charged status bar but then he just sat there on a white screen. We turned off and on again and it has always the same thing. I tried hitting F12 and it did nothing. I hit F2 and it went to the options but I have no idea what I should do, if anything.

  So, can you help me? What should I do now?

  EDIT: I tried a few times to press F8 to boot into safe mode, and it does nothing. I also hit F12 and it brought me to a start menu. I hit "diagnoses" and it did nothing.

  Hi, please check the information here: http://cmdrkeene.com/quickly-repair-pc-problems

• Windows 7 does not start & cannot access the advanced boot options

  Ive a 4Yr old windows 7 computer acer laptop, on start-up I get black screen saying:

  PXE - E61: media test failure, check cable of
  PXE - MOF: out broadcom PXE ROM.
  No boot device insert the diskette boot & press one touch
  same message when I insert the disc of recovery, even when ive him asked to boot from the cd first through f2 drive, I can enter the setup through f2, but can't access boot options via f8, help! I don't know what else to do.
  Thanks in advance.

  Hello

  There are normally 3 possible reasons of this error you have.

  1 BIOS Boot Oder set to Network Boot: BIOS settings to check the boot order.

  Check the boot sequence, if possible and make sure that HD is set to 1 in the boot order

  2. check the cable connections between the motherboard and the hard disk to ensure that they are not loose

  3. doesn't have a hard drive.

  Test the hard drive.

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And you can also use this method to test your hard drive:

  "SeaTools for DOS.

  http://www.Seagate.com/support/downloads/SeaTools/

  "SeaTools for BACK tutorial.

  See you soon.

• WT8-B-102 does not start even after charging

  I recently bought a Toshiba WT8-B-102, and I have some problems with it.

  First of all, I couldn't install the update to the BIOS for a reason, but this isn't a huge problem for the work of the Tablet very well

  but now I can't start it over. yesterday, I had the same problem, the tab left alone for a while (on the charger) and after that there no start/start. half an hour later, I tried again (after taking the charger) and then he started, but today it won't start at all. Even if I load for a few hours, then try again, try to start charging, etc. It's not good right?

  I don't see that some led light or any other sign when I attach it to the charger. Any help or ideas guys?

  Thank you

  Probably the battery is totally discharged.
  In this case, you need to charge the battery by connecting the power adapter for 30 minutes before turning the power on

  Yet WT8 and Encore WT10 won't turn on after some time of no use
  http://APS2.toshiba-tro.de/KB0/TSB4903N80001R01.htm

  If this will not help, the device must be checked for possible hardware problems.

• Laptop does not start until after the virus attack

  Last night I was browsing the web when suddenly I got a lot of warnings of viruses Microsoft arise. I immediately disconnected and then ran a full scan of the system of McAfee, but he can't find anything, so I keep the laptop. Now when I try to start it, just at the point where the wallpaper appears (but), I get the following message - "Data Execution Prevention - to help protect your computer, Windows has closed this program - converter of Cookie by Microsoft. The boot process and then stops and goes no further. I then click "close message" (which is the only option), then get a 'Cookie converter has encountered a problem and needs to close... ". "Please tell Microsoft this problem"... window. The laptop remains frozen, regardless if I click 'Send error report' or 'do not send '. My only option then must he put off, which seems to be quite normally, i.e. "Logging Off" followed by "Windows is shutting down".

  I tried booting in safe mode and also "safe mode, last known good configuration", but exactly the same thing happens every time either I can't past the error message above.

  Can anyone suggest what I can try?

  I am running Windows XP SP3 and I am up to date with all Windows updates.

  I agree with Akuma.

  In this case backup your data and use the Toshiba Recovery disk and reinstall Windows. It only takes a few minutes and not so long as trying to correct the problem.
  I think it would be the best solution because the same phenomenon occurs in safe mode and last known good configuration.

• USB and a targus wireless mouse does not work, even after the help of MS tech.support

  Microsoft Tech. checked my pc online to see if I could connect my Targus mouse and its usb device. He said that I can. I still can't activate it

  Hi DebraKennedyUP,

  1. did you last changes made on your computer before the show?

  2. What is the operating system installed on your computer?

  3 - is the same mouse work on different computers?

  Perform the following troubleshooting steps:

  Method: 1

  Configure the computer to clean boot and check how it works.

  To configure the computer clean boot, follow the steps in the below link:

  How to perform a clean boot

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Method: 2

  Run the troubleshooter of material to find exactly the problem.

  Open the hardware and devices Troubleshooter

  Method: 3

  Also, proceed as shown in the following link.

  Hardware devices do not work or are not detected in Windows

  Method: 4

  I suggest you to update the drivers and check how it works.

  Updated a hardware driver that is not working properly