Why I see a large increase in SPAM in the last days?
Why I see a large increase in SPAM in the last days? The Apple Mail application had always done a better job by sending these things to the older junk - now, I receive a lot of junk in my Inbox.
Spammers find new ways to pass the time. Mark as not junk and see if the Mail finds new messages. If it appears undesirable filtering does not work, open the preferences of Mail to spam filtering and make sure this option is enabled. Is he is and it seems again that it does not work, you can reset the junk e-mail filter. Downside is that you will lose all that he learned in the past.
Tags: Mac OS & System Software
Similar Questions
-
Why my FireFox went painfully slow/Not responding since the last update?
Since the last update Firefox doesn't want to just not worked for me, most of the Web pages take 20 to 30 seconds to load, and often it will simply not respond and take a minute to load, and when he does have a script error that for google images will forget this topic well in 2 minutes after the message not responding is finally going to my brother also uses Firefox and his works perfectly fine, I disabled all addons and it's the same thing. If I use another browser (Chrome) is super fast, I tried a few suggestions for other positions like firefox high priority and such there is little difference if all don't please makeme use chrome
Hello
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions and preferences.- Sites Web open is not recorded in less than 25 versions of Firefox.
To reset Firefox, perform the following steps:
For Firefox versions prior to 29,0:
- Go to Firefox > help > troubleshooting information.
- Click on the "Reset Firefox" line
button.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
For Firefox 29,0 and above:
- Click the menu button
click Help
and select troubleshooting information.
Now, should open a new tab containing your troubleshooting information.
- At the top right of the page, you should see a button that says "Reset Firefox"
. Click on it.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
Thank you.
-
Why do I see a large number of entries in the queue of my printer
I'm sorry you have a problem with the list of documents in the print queue.
In this same window 'see what's printing', click on the printer (on top left). Choose DELETE or CLEAR queue.
See if that helps. Otherwise, you can stop and restart the printer spooler. Do you know how?
-
Why I see a yellow exclamation point symbol in the address bar?
When visiting certain sites using Firefox Android, I get a yellow exclamation symbol in the left side of the address bar. For example in http://www.w3schools.com/html/html5_geolocation.asp
Why this is happening, there is no indication anywhere. Clicking on it does nothing.1. What does this symbol.
2. the fact that I was able to get information on this topic (in the browser) makes this extremely hostile user and should be fixed.See screenshot to https://lh5.googleusercontent.com/-LJAuws1PnH4/UeJmfCwA5FI/AAAAAAAAAUM/VyTqkOySsg0/w491-h872-no/13+-+1
None of these answers are correct. The favicon of error occurs occasionally in Firefox for Android. When the browser is offline or on a poor network connection, you will get a time-out error page.
We have a bug where the icon persists on reload. With a little time the favicon cache will expire and the favicon will be updated to the correct.
-
Why are there so many versions of Firefox in the last 6 months?
Firefox 9.0 publication December 2011
10.0 Firefox released January 2012
Firefox 11.0 released March 2012
Firefox 12.0 released April 2012
Firefox 13.0 released June 2012Where are the notes? I see some of the differences between the versions, but the speed at which they are distributed has me suspicious.
Mozilla is passed to a cycle of "Quick release" with the release of Firefox 4 and 5. This means that every 6 months, a new version of Firefox comes in the pipeline. https://wiki.Mozilla.org/RapidRelease http://blog.lizardwrangler.com/2011/08/25/rapid-release-process/.
Basically, what that means in practice for users is every 6 weeks, bug fixes, new features, improvements, etc. that are ready for Firefox are released. If a feature is not ready, it is held until the next version. Instead of having to wait a year or more between updates (such as 3.6 to 4.0) containing new web technologies, performance enhancements, etc. New features are ready for users much more quickly.
If you wish to view the release notes, you can go to http://www.mozilla.org/en-US/firefox/fx/, click the Desktop tab (because it most likely will be showing the mobile tab right now). Then click on "What's New". This will take you to a page like http://www.mozilla.org/en-US/firefox/13.0.1/releasenotes/
-
Why the APPLE TV to stop working 48 hours after installation
You will need to provide more information
-
I want to see when my hotmail has been for the last 24 hours
I know that someone it accessible while I was on the train b/c I have a keylogger on my computer-can I not see something else when he was available all day? Its impt b/c there were sensitive emails sent later in the day.
Hello
Given that the problem is related to hotmail, I suggest you to post the question in the forums and check them off below if it helps:
http://windowslivehelp.com/solutions.aspx?ProductID=1 -
Why can't I now clear the history of the last days or weeks, I was doing?
Unless I remember wrong a few months ago, I could choose different periods to erase history; now only a day or a few hours. Who is new, or can I go back to the older technique?
Thank you, Paul G.-> click on the Firefox button and click history
Remove items from the history of the days you want. Check and tell if its working.
-
Only in the last days, Windows will ONLY open in Mode without failure. (I have made some changes myself)
I tried everything I knew how to do, without success.It must be clarified...
Which of the following statements apply to your problem:
1 when you started the computer you tried to log in normal mode, it wouldn't, and you needed to go to safemode manually in order to identify you.
If so, was there an error message?2. When you start the computer, it went automatically in safe mode.
If so, try this...Login in safe mode > start button > in the search box, type msconfig > Enter > at the top, click on start > make sure that there is NO check mark in front of Safe Boot > make sure that there is NO check mark anywhere in this window > click OK when finished.
-
I get very irritated by how Windows 8 behaves in what concerns the registration of files from the internet.
Don't know anyway or tricks Windows 8 brand allow me to save the last saved location or to specify the default saving location, it's not "my document"? It drives me crazy especially when I try to load files for my email or down when you save files from the internet.
Concerning
I figured out, you click on your folders icon in the lower left corner, then click 'libraries' left, make a right click on 'my documents' or 'my images' depending on what you are trying to save, click on properties, click on 'Add' and select the desired drive, then make sure it is ticked as "save location" and remove the other 2 in the list... Click apply / OK. BAM now whenever you save a document he will enter the location of your choice / image if you did it in my photos
-
Big increase in size of the backups after upgrade
Hello
I updated my database of 10.2.0.4 on win2003 SP2 for 11.2.0.1.0 SE SE on win2008 R2 SP1 64 - bit, by making exp/imp
The amounts of size databasefiles up to approximately 150 GB on each server
But when I do a normal RMAN backup of the data files to the new database (database backup device type disk); I get a backupset that is 78 GB in size.
On the old database, the backup size was only 36 GB
Two data are substantially the same, and I don't think I'm using the compression on any one of the database backups. I listed the RMAN settings below
Can someone tell me why I see this huge increase in size of the backups?
Best regards
Klaus Mogensen
10 GB RMAN settings:
CONFIGURE REDUNDANCY 2 RETENTION STRATEGY;
CONFIGURE BACKUP OPTIMIZATION # by default
SET UP DEFAULT DISK DEVICE TYPE; # by default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
SET UP THE DEVICE TYPE DISK BACKUP FOR PARALLELISM BACKUPSET TABLET 1 TYPE;
CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
CONFIGURE the FORMAT of DISC TYPE CHANNEL DEVICE "C:\backup\vtrack\backupset\ora_df_%Y_%M_%D_%T_%t_s%s_s%p.bkp";
CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
CONFIGURE ENCRYPTION OF DATABASE # by default
CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' D:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\SNCFVTRACK. ORA'; # by default
11g RMAN settings:
CONFIGURE REDUNDANCY 2 RETENTION STRATEGY;
CONFIGURE BACKUP OPTIMIZATION # by default
SET UP DEFAULT DISK DEVICE TYPE; # by default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
CONFIGURE ENCRYPTION OF DATABASE # by default
CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' E:\ORACLE\PRODUCT\11.2.0\DBHOME_1\DATABASE\SNCFVTRACK. ORA'; # by default
That is why,
Configuring your channel 10g device:
SET UP THE DEVICE TYPE DISK BACKUP FOR PARALLELISM BACKUPSET TABLET 1 TYPE
Configuring your channel 11g device:
SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
The 11g, 10g being compressed backups are not.
-
DW CS6 using, Windows and sometimes try DW CC. I say just put the files on the server. All, I repeat all, times, I download, the file index.html and sometimes other files, does not update. I use iPage as my host, but others have tried with the same results. If I go to iPage file manager and look at the file on the server, this is the old version, before the updates to the file. Physically, I delete the files from any problem and put the file on the server individually. Because the way it happened with different hosts, I'm on #4, I think it's a problem of DW. Any ideas?
As a un travail work around download, tell him rather than the button synchronize and see if the results are different...
1 right-click the root directory of local site in the files window
2. choose the selection command > recently changed
3. set ' files created or modified in the last: ' for 1 day
Which will highlight everything that has received a change in any of the site for the last day. Then, you click on the button Put standard to place these files on the server.
If it doesn't, check your FTP logs (access the Site > advanced > FTP Log) and see if there is anything that is mentioned on the index page.
-
WHY JOBS FIVE TIMES LARGER WHEN OPEN?
WHY JOBS FIVE TIMES LARGER WHEN OPEN? Closed printing 3Mo contest; 20.6 mg open, with the size of the document of 8 x 10 to 300 dpi.
My sister 'amateur' digitized pictures on Epson 4490 and sent... 35 to 50 KB each. I complained that these stamps must be analyzed on larger size once again.
She says, open them in PS. Today, there are 600 kb 3x3@300dpi. I '"the professional almost' feel like a fool. What is the truth. Thank you 1 million of your time & entry. Carol Ann Dwyer.
I was curious myself, I did a little research. I normally do not hand off files to others, so this isn't a problem, but if this question comes up again I can explain it.
Here is the difference:
«For the sake of simplicity, let's just deal with the final image after turning, he converted and do any cropping.» This image, opening in Photoshop, has a size of file 'open' or 'work', as seen in the section control panel size Image above. However, when you come to save the final image, you will need to decide about the compression of files. Generally you will be save the image in TIFF format, which may have a compression or not at all, or as a JPEG file, which will always be compression. If the image has been saved with the downsizing, you notice that the backup image has a file size much smaller than what it was when it was opened. Think of this as 'saved' or 'compressed' file size.
The problem comes when you look at an image that has been stored on your hard drive and you must decide what the 'open' or 'work' of the file size is the size of the 'open' file that account when you send an image to a client. »
You open the file and look in the box about the size of the Image to see open size or work.
-
When I send an email why I see two copies in my "sent" folder?
When I send an email why I see two copies in my "sent" folder?
Whenever I have send an email, two copies of that email are stored in my "sent" folder.
How can I fix this so that only one copy will my "sent" folder?In the top right of the Thunderbird window, click the menu button > Options > account settings > Copies and folders.
Uncheck "place a copy in the"sent"folder. -
Why I'm not able to see nvidia as a MacBook Pro with the Retina display graphics card
Why I'm not able to see nvidia as a MacBook Pro with the Retina display graphics card
MacBook details below?
Model: MacBookPro11, 3, MBP112.0138.B15 of BootROM, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, MSC 2.19f12
Graphics card: Intel integrated Iris Pro, Intel Iris Pro,
Graphics card: NVIDIA GeForce GT 750 M, NVIDIA GeForce GT 750 M, PCIe, 2048 MB
Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020
Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020
Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 134), Broadcom BCM43xx 1.0 (7.15.166.24.3)
Bluetooth: Version 4.3.6f3 16238, 3 services, 18 aircraft, 1 incoming serial ports
Serial ATA Device: APPLE SM0512F, GB 500,28 SSD
USB device: Memory card reader internal
USB device: USB OPTICAL MOUSE
USB device: HUAWEI Mobile
USB device: Hub BRCM20702
USB Device: USB Bluetooth host controller
USB device: Apple keyboard / Trackpad
Bus crush: MacBook Pro, Apple Inc., 17.1
Thank you
gis_abc
He seems to show NVIDIA graphics card.
Kim
Maybe you are looking for
-
Why down loads will not open?
the arrow shows the download is there but no file opens.
-
It won't AutoComplete passwords after completing my username, how do I turn it back on?
I'm spoiled me. Firefox will remember my username, email sign in for example. After you type the first letter of my username, it shows me the rest. After I selected my password is already entered for me. It was great, because I didn't remember a lot
-
Satellite A350-12J said to insert the DVD + "this is a system error.
I recently bought a toshiba Satellite A350-12J...The computer tells you to insert the DVD + this is a system error... Please insert the DVD - disks to perform backup of the recovery disks.I hope it is of some help, I am now almost bald of pulling my
-
Watchdog output NI 9476 module
I use an output of the module NI9476 to give me a signal of guard dog. Therefore, it turns on and off every second. How long should I wait to last? This isn't a problem if it's a transistor rather than relay, but I can't find any reference to this ty
-
Cannot install I tunes 10.7 on my portable 32-bit of windows 7
When I try to install 10.7 my laptop is in what regards the "copy new files. The progress bar goes up about 99% of the bed restoration of action legend. The installation tells me it failed due to errors. He doesn't tell me mistakes and won't install