Why illustrator is not preview images when you drag?

Similar Questions

• I get an "OLE" instead of a Bitmap image when you drag an image from Firefox to CorelDraw X 4, how do I prevent this?

  I get an "OLE" instead of a Bitmap image when you drag an image from Firefox to CorelDraw X 4, how do I prevent this?

  First, drag the image on the desktop, and drag it to Corel Draw. If your dragging directly from firefox to Corel Draw, only copied link.

• How? Minimize the length of the image when you drag the component of the project timeline

  Greetings from gurus.

  How do you keep an image dragged in the Panel project to the timeline, covering the length of the entire composition?

  Images to the timeline always reach the entire composition. When you have a hundred of clips and just two seconds or so, each element in a composition of four minutes sizing is... Well, a lot of time. Even dragging on the agenda and the time the layer just pushes it beyond the end of the composition, and always requires resizing.

  Should be an easy answer. Ready for my Homer Simpson "Doh!"

  Thanks in advance

  Gr33nE99s

  Hello

  Preferences > import > still of images...

  Set your desired default import duration there.

• Move what tool does not layer move when you drag with Wacom Tablet

  I use the trial version of CS5 (will probably be updated at the end of the trial), and I found only one thing about it that I like more than CS3. It is VERY VERY annoying, and I don't know if it's a bug, or just a preference that must be reset:

  When you use the move tool, I will suggest something and it will break just back to where it was originally. When it snaps again, it could move in the sense that I drag a few pixels, but it is certainly not moving where I want to go. The only way to make things go as I want to is to transform freely... but it is annoying, when you try to create a presentation, to have free transform each item that you want to move first.

  I'm guessing that this is a problem because sometimes, and sometimes it isn't... it's pretty random. I tried to turn snap on/off, and nothing changes. No idea how fix/change it?

  ~ Mike

  Title of the message was edited by: Brett N

  Hello

  I think I may have found the culprit. I started using Adobe PS CS 5 Extended the same day I got the Wacom Intuso 4 (about a year ago) and NEVER had a problem until last month when I added Adobe PS CS5 in the application section, see below.

  That's the ONLY change I made to my settings from wacom alongside the typical button layout.

  

  I just tested this point. I removed the Adobe Photoshop CS5 from the field of Application of field and restarted Photoshop WITH the Tablet is plugged. Now, I can use the touchpad and tablet. See below:

  

  Just to test my conclusion, I have readded the application to the field of application (Photoshop was closed; three feet away from the mouse and pen) and changed my settings as I wanted, so I started to Photoshop.

  At first, I was able to use the track, but as soon as I used the pen, the touchpad stops working correctly and the problem of 'go back' started.

  I don't have Flash Player and Wacom in the other field on System Preferences, see below.

  

  In this case it does not matter weather that the pen is sitting on the shelf or not. Once Photoshop is removed from the scope of the parameters of Wacom, the touchpad and tablet work in harmony.

  I hope it works for you and Adobe/Wacom allows a solution/solution of the problem.

  Kind regards

  Brandon

  Post edited by: numeroeins

  Post edited by: numeroeins

• How to disable the preview images when you move to an icon in the taskbar

  How you turn off the preview of the image during a flight over an icon in the taskbar?  Who is considered the aero display?

  Go you through the related discussions at the top right?

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/how-do-you-disable-miniature-pop-up-Windows-when/e77ada42-29e5-440e-a0be-74e737cf969d

• Selection tool is not the tail with images when you drag

  So I had this frustrating thing for a while. When I put my selection tool a video file at first to move to the side or another layer and as soon as, like moving the selection tool a bit, he places automatically the video one layer under my selection tool... So I have to move the selection up to a length of layers tool to adjust it to the left and right on the timeline... Just a fight. I wish that the selection tool has not changed the layer of videos when I moved it left and right... Just stick with the images that I am setting on the im adjustment layer. Check out the video and you will understand what im getting. The selection tool shows a strange looking symbol with an arrow pointing down so I guess it's just a special feature that was accidentally checked the. You just don't know where I can go back to normal. Thank you

  Video:

  Went on the Chat with Adobe and they solved the problem via remote access.

  First on erase my personalized workspaces closed first pro. Then went to my "documents" (I have a mac) 'Adobe' and then click 'Premiere Pro' and moved three files named "6.0" "9.0" and "10.0" in a new folder, that they named "Od." Finally they opened back first. When the box came to put everything in place, they went up to the top of the window and deselected "import the project workspace" under "workspaces". I have opened a project and it fixed the problem. I had to make a new workspace and change some shortcuts custom back, but other that that, it was back to normal.

• Why have I not more option when you try to delete a text message?

  I have an iPhone 6 and I can't delete a text message when I want to. If I go to a specific message and keep it pressed, the only option I get is exemplary. There is no other option. Why and how to fix it?

  Vickie Turley

  Nevermind, I found the answer. Go to the actual conversation. You cannot start typing their name and make appear old conversations, but find their names on your phone and go into that. Then more option appears.

• I bought Illustrator for a month, but when you try to run the application, it asks me to 'renew subscription '. I have tried reloading illustrator twice and reloaded CreativeCloud but it still does not work. What else can I try? I immediately need to HAVE

  I bought Illustrator for a month, but when you try to run the application, it asks me to 'renew subscription '. I have tried reloading illustrator twice and reloaded CreativeCloud but it still does not work. What else can I try? I need immediately GOT to work

  Log, activation, or connection errors. CS5.5 and later versions

  Mylenium

• custom bitmaps field not change image when click on

  I created a custom bitmap field and I change the image on the center of my field of custom bitmaps and unfocus

  but when I implement the method of navigation click to change the image when you click on this image does not change...

  my custom bitmap field filed only to focus or unfocus on the image does not change my field of custom bitmaps.

  Bitmap onfocus = Bitmap.getBitmapResource("111.png");
                  Bitmap onunfocus = Bitmap.getBitmapResource("666.png");
                  mybutton1 = new CustomBitmapField(0,"",onunfocus,onfocus,Field.FOCUSABLE){
                       protected boolean navigationClick(int status, int time) {
  
                           mybutton1.setBitmap(Bitmap.getBitmapResource("favu.png"));
  
                           return true;
  
                       }
  
                  };
  add(mybutton1);
  

  and my class of field customBitmap is

  public class CustomBitmapField extends BitmapField {
  
      Bitmap Unfocus_img, Focus_img, current_pic;
      int width;
      String text;
      Font font; 
  
      public CustomBitmapField(int width, String text, Bitmap onFocus, Bitmap onUnfocus, long style) {
          // TODO Auto-generated constructor stub
          super();
          Unfocus_img = onUnfocus;
          Focus_img = onFocus;
          current_pic = onFocus;
          this.text = text;
          this.width = width;
  
      }
      protected void layout(int width, int height)
      {
          setExtent(current_pic.getWidth(), current_pic.getHeight());
      }
      protected void paint(Graphics graphics)
      {
          /*try
          {
                  FontFamily fntFamily = FontFamily.forName("BBAlpha Sans");
                  font = fntFamily.getFont(Font.BOLD,14);
          }
          catch(Exception e)
          {
              font = Font.getDefault();
  
          }
          graphics.setFont(font);
          graphics.setColor(Color.WHITE); */
          graphics.drawBitmap(0, 0, current_pic.getWidth(), current_pic.getHeight(), current_pic, 0, 0);
  
          //graphics.drawText(text, width, 7);
      }
      protected void onFocus(int direction)
      {
          super.onFocus(direction);
          current_pic = Unfocus_img;
  
          this.invalidate();
      }
    protected void drawFocus(Graphics graphics, boolean on)
    {
  
      }
      protected void onUnfocus()
      {
          super.onUnfocus();
          current_pic = Focus_img;
          invalidate();
      }
      public boolean isFocusable() {
          return true;
      }
      protected boolean navigationClick(int status, int time) {
  
          fieldChangeNotify(0);
          return true;
      }
  
  }
  

  When you debug this code, which of your methods of navigationClick, is actually used?

  When you expect the bitmap change, the code should lead object so that to happen.  Paint running?  This is the correct Bitmap painting?

  If you answer these questions, I think that you figure to yourself what is the problem.

  While you're there, you can also watch the following Threads that you have started or contributed to.  Can you solve or continue to contribute to these?

  http://supportforums.BlackBerry.com/T5/Java-development/gif-animation-not-displaying-properlly/m-p/2...

  http://supportforums.BlackBerry.com/T5/Java-development/timepicker-issue/m-p/2387819

  http://supportforums.BlackBerry.com/T5/Java-development/ListField-focus-color-problem/m-p/2407881#m2...

• "Non-rectangular objects will not display correctly when you export with the help of CSS."

  I use Ind CC 2014 export a document to an epub recomposable.  The document contains a picture .ai.  The image export correctly in some parts of the the.epub, but not others, when it is deformed. There is a warning on export: "Non-rectangular objects will not display correctly when you export using CSS."  Any suggestion is appreciated.

  Hello

  For these objects, the best option is to 'rasterize container"to preserve appearance of the page layout setting in the Options of the Export Object dialog box and then export to EPUB recomposable.

  Kind regards

  POOJA

• How to open an image when you click in a Word.

  Im working in a demo for an interactive book for ipad with the Digital Publishing Suite > Folio Builder and I need to be able to open a specific image when you click in a Word. I have not found a tutorial which shows how to do this can point me to it someone in the right direction please?  THX so much

  Simply put a box above the word. Then convert the box to a button with the action "go State" that points to a specific State in MSO with your image. While an invisible button (no fill and no stroke). Probably the ASM must be first vacuum State.

• My USB to ethernet adapter works only if plugged into my MacBook Pro. I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports! Any suggestions?

  My USB to ethernet adapter works only if plugged into my MacBook Pro.

  I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!

  Any suggestions?

  Juice what 'expander' did you use?

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Folders of bookmarks in Safari in the Favorites bar not open click when you access one after another

  Question: The records of Safari bookmarks in the bookmarks bar not open click when you access one after another

  Diagnostic steps:

  (1) create 2 or more folders in the bookmarks with the individual sites in their breast.  (Examples of folder name: career, finances and health)

  (2) safari > display > display favorite bar. All the Favorites should be visible in the main window of Safari with all these files

  3) click on the folder named career and then go directly to Finance. (the record finance should open with a single click)

  (4) or try to open the folder of health directly after clicking on career record. The health record is expected to open in one click. This does not currently happen

  Currently, 2 click are required to open a folder in the Favorites bar. To activate the button and the second displays the Web sites it contains.

  It is annoying and seems as if the browser is obsolete.

  If opening cursor hover is not what apple wants for these records, we are fine with it. But the least we should do, it's that these files opens in one click.

  Thank you.

  Send feedback to Apple. They will not respond, but at least know that there is a problem. If enough people send feedback, it can become the problem solved as soon as possible.

  Your comments

• Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Having a printer at the office and one at home, but use the same PC for both? Unable to print at home after bring you it to the office (and vice versa)?

  If you USB, most of the time, the PC will recognize what printer is which. Sometimes PORTS does not commute. You can manually change the correct ports if necessary.

  CLICK ON THE MENU START

  1 devices and printers

  2 right CLICK on the printer

  3. choose the PRINTER PROPERTIES

  4. click on PORTS

  5. There will be a list of ports with one (checked marked). If it's on the wrong port, change to the right pair and choose APPLY.

  (NOTE: it must ALWAYS be on a USB port or a wireless connection.) Some ports wireless start with a #(adresse IP) or a SERIAL number)

  I hope this helps. Sometimes, you can create your own port if you have more questions.

• My Windows Media Player does not open upward when you click it in the list of available programs, nor will any media over the internet using Windows Media does not work

  My Windows Media does not open upward, when you click on Window Media Player in the list of available programs nor play any internet media using the Media window. I have the 110.6002.18311 version. Any help to fix this problem will be appreciated.

  Hello

  You can try to re register the dll files for windows media player and if it helps fix your problem. To do this, please follow the steps below:
  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. At the command prompt, type the following commands and press ENTER after each command:
  regsvr32 vbscript.dll
  regsvr32 jscript.dll
  regsvr32 wmp.dll