Why is my ESP larger than my canvas page size?

Similar Questions

• VMware Workstation is unable to open one of the virtual disks required by this virtual machine because it is larger than the maximum file size supported by the host file system.

  I'm transitioning from Windows XP (64-bit) on a new computer with Windows 7 installed.  I undertook to VMWare Workstation 6 7.0.1 in the process.  The problem is with a very large RAID 5 volume on the new system.  It's a score of 5.45 TB (TPG and NTFS).

  When I try to start a virtual machine on this volume, I get the message "VMware Workstation cannot open one of the virtual disks required by this virtual machine because it is larger than the maximum size of the files supported by the host file system.".  This is obviously not true.  If I copy the virtual machine to another drive on the system, it starts without a problem.

  Anyone have any ideas on how to work around this problem?

  try to add this line in the vmx file:

  diskLib.sparseMaxFileSizeCheck = "false".

  Maybe it helps.

  VMDK-type do you use?

  monolithicSparse? -C' is the only part type more?

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Why is the default on Windows 8 K page size?

  Hello
  
  I do some work setting on our databases because the Scriptures are a bit slow:
  about 100 puts / deletes per second. One thing I'm getting is setting the fill factor
  as recommended in the API docs and requires knowledge of the size of the page.
  
  I found that the system on linux and windows (x 86) page size is 4 K.
  However, the BDB chooses a page size default of 4K on linux and 8K on windows.
  I found this by collecting data using Db::stat_print() see Windows test code below.
  I have the same code that runs on both platforms.
  
  I was expecting that BDB would choose 4K on both platforms to match to the
  System page size. The docs and "The Berkeley DB Book" say or imply
  that this is the case.
  http://www.Oracle.com/technology/documentation/Berkeley-DB/DB/ref/am_conf/PageSize.html
  http://www.Oracle.com/technology/documentation/Berkeley-DB/DB/api_cxx/db_set_pagesize.html
  
  Can someone explain why the default page size is 8K on windows?
  Should I replace the default value and set it to 4K? I am reluctant to substitute the
  page size by default without knowing why a non intuitive value.
  
  I have read several forum posts on the page size, as well as the reference setting
  Guide section, API docs, etc.
  
  I use BDB 4.6.21 on Windows XP Professional (fully patched) and linux.
  I use a DB_HASH database.
  
  My files are fixed size: the key and the data set total 40 bytes.
  If the overflow pages should not be a problem, and there should be a lot of
  records per page.
  
  
  #include '... /.. '. "/ db-4.6.21/build_windows/db_cxx.h".
  #include < Windows.h >
  #include < errno.h >
  
  void printInfo();
  DbEnv * getDatabaseEnvironment();
  DB allocateNewDbHandle (const char dbName);
  void printSystemPageSize();
  
  const char * dbEnvHome = "D:\\bdb\\bdbtest\\";
  const char * dbToStat = "D:\\bdb\\bdbtest\\testStat.db";
  
  DbEnv * dbEnv = NULL;
  DB * dbh = NULL;
  
  int main (int, char *)
  {
  printInfo();
  dbEnv = getDatabaseEnvironment();
  DBH = allocateNewDbHandle (dbToStat);
  
  printf ("\n");
  int rc = dbh-> stat_print (DB_FAST_STAT);
  printSystemPageSize();
  }
  
  Sub printInfo()
  {
  int major, minor, patch;
  char * bdbVersion = DbEnv::version (major, minor, and patch);
  printf ("BDB version [%s] \n", bdbVersion);
  }
  
  DbEnv * getDatabaseEnvironment()
  {
  int rc = 0;
  u_int32_t flags = DB_CREATE | DB_THREAD | DB_INIT_CDB | DB_INIT_MPOOL;
  
  DbEnv * env = new DbEnv (DB_CXX_NO_EXCEPTIONS);
  If ((rc = env-> Ouvrir (dbEnvHome, drapeaux, 0))! = 0)
  {
  printf ("attempt to create the environment of BDB failed: error = %d [%s] \n",)
  RC, DbEnv::strerror(rc));
  env-> close (0);
  Remove env;
  return null;
  }
  
  return the env;
  }
  
  DB allocateNewDbHandle (const char dbName)
  {
  int rc = 0;
  DB * theDbToOpen = new Db (dbEnv, 0);
  
  If ((rc = theDbToOpen-> Ouvrir (, dbName, NULL, DB_HASH, DB_CREATE, 0))! = 0)
  {
  printf ("CANNOT open db handle error = %d [%s] \n", rc)
  DbEnv::strerror(rc));
  theDbToOpen-> close (0);
  delete theDbToOpen;
  theDbToOpen = NULL;
  }
  
  Return theDbToOpen;
  }
  
  Sub printSystemPageSize()
  {
  SYSTEM_INFO siSysInfo;
  Memset (& siSysInfo, 0, sizeof (SYSTEM_INFO));
  : GetSystemInfo(&siSysInfo);
  unsigned int pageSize = siSysInfo.dwPageSize;
  printf ("page size \n\nSystem = %u\n\n", pageSize);
  }

  Hello

  We use a default 8K on Windows page size because it is not easy to recover from a specific block size.

  The comment in the code to set the block size is:

          /*
           * The filesystem I/O size is not easily available.  In particular,
           * the values returned by GetDiskFreeSpace() are not very helpful
           * (NTFS volumes often report 512B clusters, which are too small to
           * be a useful default).
           */
  

  If you know a way to reliably determine the block size of system files in Windows - we can integrate it into the code.

  We choose a default value of 8K on all platforms where we do not find a specific block size. This is because it is usually better - for performance reasons - to have a writing of data in chunks larger than the block size.

  If you read the reference guide on page size setting, you can probably do better than our "guess". You just configure the page size you want through the DB-> set_pagesize API.

  Kind regards
  Alex Gorrod, Oracle Berkeley DB

• When I send an email from my iPad Air to the recipients not Apple and tech photos using the camera icon, the photos are received very extended, larger than the viewing page. What I am doing wrong?

  When I send an email from my iPad Air and attach a photo usping the camera icon, it is received on the devices not Apple very extended and unable to be read. What I am doing wrong?

  You're probably doing nothing wrong.

  One thing to try is after inserting that tap photo images and then change the size. If it works, you have my CCC friend to thank for calling your issue to my attention.

  Tap.

  

  Tap.

  

  Receipt by e-mail.

  

• When I export to PDF from InDesign, my page size is higher than expected.

  I have an InDesign document with a page size of 8.5 "x 11".  There bleeding from. 125 "on each side.  When I export to PDF and look at the properties of the document, the page size is 9.33 "x 11.83".  I thought it would be 8.75 "x 11.25".  Why the page size par.83 instead de.25?

  Hmmm... can't reproduce here. Of course, including any kind of landmarks of the printer in the output increases the size of larger than the pad page + bleed, but as long as I have let everything under "Brand" unchecked by default and tick the check box use Document bleed settings under bleed and Slug, I get the 8.75 x 11.25 expected.

• In the use of space Audit why are my fonts such a large percentage of the total size of the file?

  In the use of space Audit why are my fonts such a large percentage of the total size of the file?

  4 MB of an interactive file 6 MB (71% of the total file size).

  I'm only using Verdana.

  In this case the problem is not one of the fields have the police other than Helvetica. All fields are buttons, and all use the Verdana font in their appearances (icons), as opposed to their labels (aka Legend). This is how InDesign works when it generates the appearance for the buttons. As a result, that Verdana is incorporated several times as a subset, more than 300 times, once by button. This includes a lot of overhead, so that you get the size of large file.

  It would be much smaller than that you need to add buttons in Acrobat, even if you've used Verdana. In this case, the entire police would get embedded, but only once. It would take more work, but the process can be automated, if you need to do this sort of thing a lot.

• First paragraph of the text is larger than the following paragraphs

  I have a page with a lot of text on the subject. For some reason, the first paragraph seems larger than the following paragraphs. But all that I checked shows that they are identical in terms of specs. I copied/pasted/no formatted/spruced up... but no matter what I do, that first paragraph is looking to be bigger! Is this some secret parameter that I don't know?

  I took screenshots and they are indeed the same size. But that first paragraph seems just different! Why would it be?

  I have attached a screenshot. Let me know if my client and I are just seeing things.

  Julie

  

  Seems to be the same size.

  See the image below, the first line of paragraph 2, overlapping the first paragraph. (o during even as o in the company)

  Can be an illusion of perspective due to all caps in the first paragraph.

  

• Photoshop tells me my file is larger than 2 GB and can not save...?

  Hey guys, I was resizing of images to fit a web template and when I got to a particular image, he gave me notice of the error and told me my file is larger than 2 GB and cannot be saved. The image dimensions are 27 "x 35" PPP 240. I shoot with a full frame D800 and don't have never had this problem before, even if make images larger. IM walking Photoshop CC version, on a fairly powerful iMac.

  Resizing of the process: enlarge the size of the canvas, and then across the layers and images to fit the new size. The canvas size is 27 "x 35". What's not here? Thank you all.

  I do not use PS which, often, but I know that the file extension by default to saving a Photoshop Document is ".psd".  If you save a file size larger than the maximum allowed for this extension, you must save it as a Photoshop (".psb") file.  I don't know if you can save a large file to TIFF («.tif/.tiff') and keep all the attributes that has a native PS file.

• &lt; Unspecified file name &gt; file is larger than the maximum size supported by datastore '&lt; indeterminate datastore &gt;.

  I know that this issue has much spoken in the forums, but the answers are always to make sure that your block sizes are set to 8 MB - mine are already. Let me explain:

  I have a virtual machine with a large amount of connected storage - something along the lines of discs 10 x 1.99 to. Sit all VMDK on partitions of the VMFS of 8 MB of size block, including the configuration of the VM (location of the pagefile).

  Every time I try and snapshot of the virtual machine, I see the "< unspecified file name > file is larger than the maximum size supported by the data store ' < unspecified datastore >. All other virtual machines instant fine, but any other VM has a similar amount of storage as the VM problem.

  I have now moved the configuration files of the virtual machine to a new partition VMFS 5 of 1.91 TB, but the instant error persists. Most of the readers is sitting on VMFS 3.33 or 3.46. It will take me a while to move all VMFS 5 to see if that solves the problem.

  VMware.log for VM reports:

  2011-10-09T09:55:55.328Z| vcpu-0|  DiskLibCreateCustom: Unsupported disk capacity or disk capacity (2186928627712 bytes) is too large for vmfs file size.
  2011-10-09T09:55:55.328Z| vcpu-0| DISKLIB-LIB   : Failed to create link: The destination file system does not support large files (12)
  2011-10-09T09:55:55.328Z| vcpu-0| SNAPSHOT: SnapshotBranchDisk: Failed to branch disk: '/vmfs/volumes/4dc30ba3-b13c5026-92d8-d485643a1de4/spoon-app/spoon-app_2.vmdk' -> '/vmfs/volumes/4dc30ba3-b13c5026-92d8-d485643a1de4/spoon-app/spoon-app_2-000001.vmdk' : The destination file system does not support large files (12)
  
  

  My VMDK and volumes are smaller than 2032GB. I don't understand why, it's be a problem.

  Anyone have any ideas?

  Although ESXi 5 supports larger LUN as a raw physical devices (up to 64 TB), the maximum size of a virtual disk has not yet changed.

  André

• WHY JOBS FIVE TIMES LARGER WHEN OPEN?

  WHY JOBS FIVE TIMES LARGER WHEN OPEN? Closed printing 3Mo contest; 20.6 mg open, with the size of the document of 8 x 10 to 300 dpi.

  My sister 'amateur' digitized pictures on Epson 4490 and sent... 35 to 50 KB each. I complained that these stamps must be analyzed on larger size once again.

  She says, open them in PS. Today, there are 600 kb 3x3@300dpi.  I '"the professional almost' feel like a fool. What is the truth. Thank you 1 million of your time & entry. Carol Ann Dwyer.

  I was curious myself, I did a little research. I normally do not hand off files to others, so this isn't a problem, but if this question comes up again I can explain it.

  Here is the difference:

  «For the sake of simplicity, let's just deal with the final image after turning, he converted and do any cropping.» This image, opening in Photoshop, has a size of file 'open' or 'work', as seen in the section control panel size Image above. However, when you come to save the final image, you will need to decide about the compression of files.  Generally you will be save the image in TIFF format, which may have a compression or not at all, or as a JPEG file, which will always be compression.  If the image has been saved with the downsizing, you notice that the backup image has a file size much smaller than what it was when it was opened.  Think of this as 'saved' or 'compressed' file size.

  The problem comes when you look at an image that has been stored on your hard drive and you must decide what the 'open' or 'work' of the file size is the size of the 'open' file that account when you send an image to a client. »

  You open the file and look in the box about the size of the Image to see open size or work.

  

• Shared pool larger than the buffer cache

  Hi all
  
  My database is 10.2.0.4 running linux platform
  
  No .of 2 cpu, RAM-2 GB
  
  SGA_TARGET wa set to 1 GB.
  
  Initially the memory have been configured as a shared pool around 300 MB and the buffer cache about 600 MB.
  
  When I questioned the v$ sga_resize_ops views I found some interesting results.
  
  Many operations and growth reduction were happened and the current size of the shared pool is about 600 MB and buffer cache is 300 MB. (this happened during last 1)
  
  I guess that the buffer cache must always be larger than the size compared to a shared pool. My assumption is right?
  
  Is it because of sql code using the do not bind variables resulting in growth shared pool? No relaods and radiation are almost ignored I think it should not be the case.
  
  Also no lock events listd in the top5
  
  I've also seen the 15% of the shared pool is marked as being of kGH:NO ACCESS, which means that the part is used for the cache buffers.
  
  Should I set the lower limit for the shared pool and the buffer cache or can I just ignore it.
  
  Thank you
  rajdhanvi

  You change your question now... your question was that he has sharedpool large size > buffer cache is acceptable... . Check your own second post... for your new question now is why pool continues to increase and partly used as buffer cache... the proof is given by tanel poder y what happens when EAMA is used... For the Kingston general hospital: NO ACCESS means that no one else could touch...

  Concerning
  Karan

• Can I use a screen larger than 27 "on Mac Mini?

  Hello

  I would get a screen larger than my current 27 "of my Mac Mini and I wonder if my Mini (by 2012) would support a new monitor around this size. Any suggestions appreciated

  Thank you

  Nick

  Some screens may work through a Thunderbolt by adapter connection;

  You may need to check what specification and then if the

  the numbers are what you can tolerate. If you really a 2011

  Screen or another model by 2012, spec Mac Mini support

  will vary. To correctly identify the model year of construction unit and not

  year sold, it is more direct. Also by looking for serial number.

  Bolt of lightning • ports and poster: frequently asked questions (FAQ) - Apple Support

  Thunderbolt Display 27 inch - Everymac.com

  Details such as the resolution may be quite low, so a larger screen

  (HDMI) may not be appropriate when the compromise compromises the quality.

  • Connection of a monitor for my Mac Mini displayport (end of 2012)

  Apple.StackExchange.com/.../Connecting-a-displayport -monitor- to - my -mac-mini-end-...

• Fonts are larger than normal

  Some Web sites were not showing correctly in contrast to in the computer.
  While browsing some website, some paragraph fonts are larger than normal.
  I am facing this problem on this site
  http://www.hackforums.NET

  Hey, please try to set the level of size of text to the smallest option in the settings of firefox android. for information, see https://support.mozilla.org/en-US/questions/976944#answer-499625

• Why I see a large increase in SPAM in the last days?

  Why I see a large increase in SPAM in the last days? The Apple Mail application had always done a better job by sending these things to the older junk - now, I receive a lot of junk in my Inbox.

  Spammers find new ways to pass the time. Mark as not junk and see if the Mail finds new messages. If it appears undesirable filtering does not work, open the preferences of Mail to spam filtering and make sure this option is enabled. Is he is and it seems again that it does not work, you can reset the junk e-mail filter. Downside is that you will lose all that he learned in the past.

• Firefox window is larger than my screen

  All of a sudden the firefox window is larger than my screen. I have no window border. I have no title bar. I have no address bar. I have not everything that calls windows he start the button bar.

  I uninstalled and downloaded with IE and re-installed. Same same-o-o.

  Help. IE stinks. Save my firefox!

  Thank you
  John

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Ctrl + Shift + F).
  If you are in full screen view then hover over with the mouse upward to make the bar appear Navigation and tab bar.
  You can click the maximize button in the upper right to leave the mode full screen or empty space of a right-click on a toolbar and use "exit full screen" or press F11.

  • Use Restore or expand in the context menu of the taskbar icon to set the focus to the Firefox application if you do not see the window of Firefox.
  • Open the system menu via Alt + space and see if you can move and resize the window.

  If it works then close Firefox (file > exit/Quit) to save the setting.

  See also:

  • http://KB.mozillazine.org/Resizing_oversize_window

  If the above didn't help then see:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF