Why is my iPhone 5s model begins with FF?

Similar Questions

• Why you do not have your products with different colors? compatible with the colors of the iPhone or the iPad? Example: Gold Earpods, silver, BLACK and Rose Gold.

  Why you do not have your products with different colors? compatible with the colors of the iPhone or the iPad? Example: Gold Earpods, silver, BLACK and Rose Gold.

  You say Apple your wishes on the link below.

  http://www.Apple.com/feedback/

• Why my iphone will have problems with pandora in synchronization with the pandora application on infotainment chevy via a usb connection?

  Why my iphone will have problems with pandora in synchronization with the pandora application on infotainment chevy via a usb connection?

  This was never resolved?  I have the same problem with an iphone 6s.  It is only my phone like an ipod playback.  I don't get the interface of Pandora.

• Why didn't - not my words of menus that begins with a big letter?

  Why didn't - not my words of menus that begins with a big letter? Some of them is very good, but 2 of them won't change, no matter what I do. (I apologize for my bad English, I hope that makes sense (btw. my Web page is in Danish))

  

  Link to the problem

  Maybe the font you use has no good capital o., otherwise this could be a CSS text transformation, in order to check the settings for the layout.

  Mylenium

• Why can't I create a table or a column whose name begins with a number?

  Why can't I create a table or a column whose name begins with a number?  I can't seem to find an answer when I Googled it.

  Thank you

  Yoann

  Hello

  jimmy437 wrote:

  Why can't I create a table or a column whose name begins with a number?  I can't seem to find an answer when I Googled it.

  Thank you

  Yoann

  You can;  Simply enclose it quotation marks name whenever you use it.

  For example:

  CREATE TABLE '3-26.
  (
  'name 1' VARCHAR2 (10)
  );

  INSERT INTO '3-26' ('1 St Name') VALUES ('FUBAR');

  SELECT '1 name '.
  "3-26;

  Remember, what inside quotes is case-sensitive, so you can't refer to that column as "1st NAME.

  Using quotation marks (and capitalizing exactly as expected) is such a pain that most people don't bother.

• Why do a '? ' at the beginning of all the emails I send? for example? Hello

  Why do a '? ' at the beginning of all the emails I send?  for example? Hello

  Usually it is a question that is perceived by users of Windows Live Mail and these doubts must be addressed to www.windowslivehelp.com

  But if it's a question of Windows Mail, then check which fonts you use and maybe it's a police problem, or if use you paper, it could be related to that (attempt to dial with no stationery).  See also www.oehelp.com/OETips.aspx#15 to see if its related to IE9.  You can also try compacting and repairing the database (see www.oehelp.com/WMUtil/), although I doubt that this would affect the display.

  Steve

• Why lately company does not release smartphones with screens 4 inches?

  Good evening!

  Why lately company does not release smartphones with screens 4 inches? Me as a person with small hands, it is very difficult to work with models even 4.3 inches.

  Now, I have Sony Xperia P. Very comfortable: fit to display me size metal case. Everything is fine except for the inserts in plastic (lower part). Shabby paint with these pads. Now, the phone looks not very nice. So I thought to change towards a new model. Because the phone close to 3 years.

  Expected to soon release a smartphone with a diagonal of 4 inches? (And in a metal box).
  Thanks in advance for your answer.

  Hi Valeria! You can share your suggestions on the Sony Mobile community here. Thank you!

  If my post answered your question, please mark it as "accept as a Solution.

• Error - file does not begin with '% PDF -'.

  Hi all

  I am getting an error for all my reports 11G BI Publisher saying PDF file does not begin with ' %PDF-'Local\EWHj-

  Where I'm able to see the data in HTML, Excel show etc...

  All these reports are works fine until last Thursday and no change was made to the models. I saved the sample data in the data model and associated with report BEEP again, but still no luck.

  When I tried opening in the generator of Template for troubleshooting it shows error below saying Preview failed.

  Template:\Oracle\BIPublisher\TemplateBuilderforWord\tmp\tmp\tmp.RTF

  SetLocale RTFProcessor: en - us

  SetData FOProcessor: Oracle\BIPublisher\TemplateBuilderforWord\tmp\0\download_data.xml

  SetLocale FOProcessor: en - us

  oracle.xdo.template.fo.area.NoAvailableAreaException: not quite render region. Please look in the output file incomplete for cause.

  at oracle.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(FormattingEngine.java:854)

  at oracle.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(FormattingEngine.java:845)

  at oracle.xdo.template.fo.elements.FormattingEngine.createNewPage(FormattingEngine.java:549)

  at oracle.xdo.template.fo.elements.FormattingEngine.startLayout(FormattingEngine.java:346)

  at oracle.xdo.template.fo.elements.FormattingEngine.run(FormattingEngine.java:143)

  at oracle.xdo.template.fo.FOHandler.endElement(FOHandler.java:752)

  to oracle.xdo.common.xml.XSLTHandler$ EEEntry.sendEvent (XSLTHandler.java:595)

  at oracle.xdo.common.xml.XSLTMerger.startElement(XSLTMerger.java:51)

  at oracle.xdo11g.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:182)

  at oracle.xdo11g.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1322)

  at oracle.xdo11g.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:366)

  at oracle.xdo11g.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:312)

  at oracle.xdo11g.parser.v2.XMLParser.parse(XMLParser.java:218)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)

  at java.lang.reflect.Method.invoke (unknown Source)

  at oracle.xdo.common.xml.XDOSAXParser.invokeParse(XDOSAXParser.java:166)

  at oracle.xdo.common.xml.XDOSAXParser.parse(XDOSAXParser.java:122)

  at oracle.xdo.template.fo.FOProcessingEngine.process(FOProcessingEngine.java:408)

  at oracle.xdo.template.FOProcessor.generate(FOProcessor.java:1231)

  at RTF2PDF2.runRTFto (RTF2PDF2.java:484)

  at RTF2PDF2.runXDO (RTF2PDF2.java:343)

  at RTF2PDF2.main (RTF2PDF2.java:235)

  Please advise on how to fix this ASAP.

  I'm using version: Oracle Business Intelligence 11.1.1.7.141014

  Thanks in advance...

  Concerning

  Olivier

  Thanks, got the fix. The issue is due to disk space on the server - not enough memory.

  Made available space, and now My PDF files work well in BIPublisher.

  Thank you very much..

  Olivier

• ADF_FACES-60097: for more information, see the error log of the server for an entry beginning with: ADF_FACES - Exception during the PPR, #2 60096:Server

  Hi all, I had a problem when using popup to create a new table row.

  I do like in this http://andrejusb.blogspot.com/2009/11/crud-operations-in-oracle-adf-11g-table.html

  but when I click on insert, an error stating:

  java.lang.NullpointerExeption

  ADF_FACES-60097: for more information, see the error log of the server for an entry beginning with: ADF_FACES - Exception during the PPR, #2 60096:Server

  In other cases, when showing Popup, when I clicked on cancel (popup), the display of the error as above. I don't know why?

  Can someone explain to me why. Thank you

  Check your page links if the createInsert operation is present.

  Then check that the getBindings() method returns a value and not null.

  Timo

• Chain of Split which begins with a delimiter

  Hi all
  I am trying to split a string using "-" as a separator and store values (strings) in a list. The problem is that, because the string begins with the delimiter, I get an empty (as my first item) element in my list. I would appreciate your help to solve this problem.
  
  My code is:
  

  public class SplitString { 
     public static void main(String[] args) {
       String str = "-Djava.security.policy=$ORACLE_HOME/j2ee/home/config/java2.policy" +
                    "-Djava.awt.headless=true -Dhttp.webdir.enable=false";
            
            SplitAndStoreAsList(str);
       }
       
      public static void SplitAndStoreAsList(String str){
       List<String> list = Arrays.asList(str.split("-"));
            
       for (int i = 0; i<list.size(); i++){
               System.out.println(i + ": " + "-" + list.get(i));
       }
            
      }
  }

  The output should be

  0: -Djava.security.policy=$ORACLE_HOME/j2ee/home/config/java2.policy
  1: -Djava.awt.headless=true 
  2: -Dhttp.webdir.enable=false

  But it is

  0: -
  1: -Djava.security.policy=$ORACLE_HOME/j2ee/home/config/java2.policy
  2: -Djava.awt.headless=true 
  3: -Dhttp.webdir.enable=false

  Why not just change the regular expression that is

       List list = Arrays.asList(str.split("(?
  

• Why IE7 becomes errors HTTP 400 XP with a good connection?

  What follows is an adaptation of article How-To-ask questions on your main page of the forum, which is so convenient I save it as a model of :

  • Build number of VMware Fusion: 2.0.1 (128865)

  • Mac:  Mac Pro w /.

  • What is the problematic behavior and what makes: most of my IE bookmark current HTTP 400 errors of links here, even the searches using the Google toolbar report 400 Bad Request.   Examples: http://www.google.com/webhp?sourceid=navclient & ie = UTF-8 or http://www.netflix.com/MemberHome IE diagnose connection problems indicates that the connection is good.  The same addresses open using Firefox (copy/paste).  All the tested links worked fine a few days ago and I have not changed the system or the software in XP Pro.  Bit Defender Internet Security software reports no problem and none of the links are listed as delimited (also not limited in IE options).

  • Have you tried looking for the Forums of Discussion for an answer?  Yes, I found some similar problems, but not the same.

  • What you have already tried:  As suggested in a forum post, I checked the connection parameters (they are all set to detect automatically).  Also, I downloaded IE 7 on the MS site and reinstalled.  No joy.  I checked the Internet Options (although I have not changed anything) and set the security in the middle (it was set to high heat).  Has nothing so I put back it.

  • The conditions where he works: addresses, and links on these pages also work.  Example: http://gis.esri.com/partners/hw_promo/hw_promo.cfm

  • How many times you see the problem:  Never had this problem before.  It started a few days ago, and happens whenever I tried wrong addresses (except for Netflix, which loaded once after having failed several times and has not loaded since).

  • He has already worked in the same configuration (same VM, same computer), and if so, what has changed since then:  Yes, it worked a few days previously, same machine, same VM, even XP, same everything I can think of.  The only change I know is daily updates to the data Bit Defender virus.

  • How experienced with OS X, you are, and you are comfortable with the
    command line: system administrator intermediate for Mac OS X and Windows XP Pro, except that I am a permanent newbie with virtualization and nothing networky.  I can do the command line as I tells me exactly what to enter, and why.

  If you experience problems with a guest, include:

  • Guest operating system:  Windows XP Pro 2002 SP3 with 3 GB of RAM, automatic updates is on.

  • VMware Tools:  Installed, but unknown version (how do you like that?)

  • Not a Boot Camp virtual machine

  • Virtual Machine created in Fusion

  If you experience problems with an application to a guest, include:

  • The application name and version:  Internet Explorer 7.0.5730.13

  Mac:

  • Dual-Core Intel Xeon 2.66 GHz (2 CPUs, 4 cores)

  • RAM: 11 GB

  • Graphics card: NVIDIA GeForce 8800 GT

  • What version of the OS version: 10.5.6

  If you are an error, including:

  • Where the error message (for example, an application in the host, the guest himself, OS X, etc.): errors HTTP 400 using only the IE browser

  • The exact text of the error message: "Web page is not found" or "bad request".

  If you experience network problems, including:

  • Network type (e.g. NAT, bridged or host-only): NAT

  • Guest network information (Windows: ipconfig/all at a command prompt): is there a risk of flight security or identity if I provide this information?

  • Host information network (run ifconfig-a in a Terminal window): is there a risk of flight security or identity if I provide this information?

  Other Notes (not things that might be related but probably is):  I had intermittent problems with my wireless modem; it loses its connection and resets all configuration.  The incoming connection has been tested and is fine all the way to the modem.  Wired connections are not lost; Wi - Fi access only.  I need to reconfigure the wireless settings to restore the service.  The modem is replaced.  Also, my wife is having a very similar problem on his iMac (no virtualization) where Firefox reports some pages Web cannot be found, but Safari loads using the same exact address; and his computer accesses Internet wireless via my modem.

  So the Question is:  I need to use Internet Explorer through Windows for some sites, regardless of whether a different browser can load pages, because some websites work just using IE.  How can I get IE to work again?

  I don't think that you need to test with a clean build roll back to IE6 running.  This means, basically, that the question is problem IE7 and OS or Windows and not a problem of Fusion.  When you have time, I would like to reinstall IE7 from the standalone downloadable update and disconnect from the network, so it can not retrieve updates while it is installing and before making updates after that Windows can check see if IE7 works and do Windows updates and check again.

• the deleting of the output XML tag beginning with LIST_

  Hello
  
  I have a requirement to generate a report with the XML output. This output will be used for downloading information to another application. I know the names of all the tags and I can't have other tags.
  I have a file xml for bi publisher and work very well but the group element added a tag more beginning with LIST_.
  for example
  < LIST_mygroup_name >
  < mygroup_name >
  ....
  < / mygroup_name >
  < / LIST_mygroup_name >
  
  I want to remove all the tags that begin with LIST_.
  Any suggestion?
  Thank you
  
  Kale.

  Reports6i, I can click on the properties of the report of the group to remove the label from the list.

  Model data it is sufficient to add the property

  Don't forget to give me points!

  IKE Wiggins
  http://bipublisher.blogspot.com

• Where can I buy an unlocked iPhone TO model A1723?

  Where can I buy an unlocked iPhone TO model A1723? SIM (FREE)

  Which country are you?

• I just got an iphone and am confused with itunes.  I the have not used in years.  I can I sync my music from itunes to iphone.

  I just got an iphone and am confused with itunes.  I the have not used in years.  I can I sync my music from itunes to iPhone.

  You need a computer that is running the latest iTunes version to either a Mac or Windows operating system.

  Mac

  1. Open iTunes.
  2. In the MenuBar at the top of your computer screen, choose iTunes > check for the updates.
  3. Follow the prompts to install the latest version.

  Windows

  1. Open iTunes.
  2. In the MenuBar at the top of the iTunes window, choose Help > check for updates. Learn what to do If you see not the menu bar.
  3. Follow the prompts to install the latest version.

  Instructions for syncing your iPhone here > synchronize your iPhone, iPad or iPod touch with iTunes on your computer via a USB - Apple Support

• I have a 6 s with Verizon iPhone. Can I send/receive calls (using this service and calls on other devices functionality) on my iPhone 5s, who was with AT &amp; T service, but has no service now since I switched to Verizon?

  I have a 6 s with Verizon iPhone. Can I send/receive calls (using this service and calls on other devices functionality) on my iPhone 5s, who was with AT & T service, but has no service now since I switched to Verizon?

  Note: I'm able to get two phones to ring with an incoming call, but the 5s consist not out. Whenever I dial a number, it says call failed.

  Do not dial a number. Try to choose a contact in the contacts App and tapping on telephone button.

  That said, I don't think that outgoing calls work on continuity since another iPhone. given that the iphone is designed to make calls through its own service.

  Document to support that you just did not mention calls from a secondary iPhone at all, it points to Mac, iPad and iPod touch, which leads me to believe that it won't work.

  It runs from devices such as iPads and Macs, who have no other way to place a cell call.