Why is printing when it is not available in 32-bit color mode

Similar Questions

• Why always, I received management is not available when you use maps for the iPhone 6 and I live in the Qatar?

  Why I always get direction is not available when you use maps for the iPhone 6 more?

  Currently I live in the Qatar.

  Hi Alison, Sameh

  The reason why you see directions is not available, it's that for cards of Apple, turn-by-turn directions is not a feature that is available in the Qatar. You can search for places and satellite imagery
  Take a look at the link below for more details on what features are available in the Qatar.

  iOS 9 feature availability
  http://www.Apple.com/iOS/feature-availability/

  Nice day

• HP Officejet Pro 8600 N911a: HP Officejet Pro 8600 N911a - Print when Fax is not saved

  Can I do so a fax is printed when it is not registered?

  I know that I can put to print and save every time, but I trust HP digital fax to save paper.

  If a fax is not registered, either because of a network error, or if the computer that logs usually in is cut off, can just fax be printed?

  @MrMeow, it's nice to meet you.

  I think I found something that can help your fax dilemma.

  This information has been in the User Guide for the Officejet Pro 8600 e-all-in-one - N911a; PG 69.

  Set up backup fax

  According to your needs best and security, you can configure the printer to store all faxes it receives, only faxes it receives while the printer is in an error condition, or none of the faxes it receives.

  The following fax backup modes are available:

  On >  The default setting. When backup fax is enabled, the printer stores all faxes received in memory. This allows you to reprint up to eight more recently printed faxes if they are always saved in the memory.

  NOTE: When the memory of the printer is low, it replaces faxes print, older because it receives new faxes. If the memory is full of unprinted faxes, printer stop to answer incoming fax calls.

  NOTE: If you receive a fax that is too large, as a very detailed color photo, it cannot be stored in memory due to limitations of memory.

  Error only > Causes the printer to store faxes in memory only if there is an error condition that prevents the printer to print the faxes (for example, if the printer is out of paper). The printer continues to store incoming faxes, as long as the memory is available. (If the memory is full, the printer stops responding to incoming fax calls). When the error condition is resolved, the faxes stored in memory automatically, print and then they are deleted from the memory.

  Off >  Faxes are never stored in memory. For example, you might want to disable fax backup for security reasons. If an error condition occurs which prevents the printer to print (for example, tracks paper printer), the printer stops responding to incoming fax calls.

  NOTE: If the backup fax is turned on and you turn the printer off, all faxes stored in memory are deleted, including any unprinted faxes that you might receive while the printer was in an error condition. You must contact the senders asking them to return the unprinted faxes. To get a list of faxes that you have received, print the Fax log. The Fax journal is not removed when the printer is off.

  To set backup fax from the printer control panel

  1 tap (right arrow) and select Setup.

  2. press Fax Setup, and then click Advanced fax setup.

  3. press on the backup Fax reception.

  4. press on , error, or out of service.

  Reprint of faxes received from memory

  If you set backup fax mode to On, received faxes are stored in memory, whether the printer has an error condition or not.

  NOTE: After that the memory is full, the oldest faxes, prints are replaced as new faxes are received. If all stored faxes are not printed, the printer does not receive fax calls until you print or erase memory faxes. You can also delete the faxes in memory for purposes of confidentiality or security.

  According to the sizes of the faxes in memory, you can reprint up to eight more recently printed faxes, if they are still in memory. For example, you will need to re - print your faxes if you have lost the copy of your last draw.

  To reprint the faxes in memory from the printer control panel

  1. make sure you have loaded paper in the main tray.

  2 tap (right arrow) and select Setup.

  3. touch Tools , or Faxand then select reprint faxes in memory. The faxes are printed in reverse order, where they were received with the most recently received fax printed first, and so on.

  4. If you want to stop reprinting the faxes in memory, press the Cancel button.

  Please let me know if these steps solved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• Epson Workforce 345 while a printer does not print. message that the local print spooler service is not available and I need to restart the spooler.

  All of a sudden my Epson Workforce 345 all-in-one printer will not print.  I get a message that the local print spooler service is not available and I need to restart the spooler.  What does that mean?

  Hello

  Check with the manufacturer of the printer for updated drivers, support and Forums for
  known issues.

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  If there is that no Windows 7 drivers try the Vista drivers if those that exist.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  ===============================

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  Follow these steps in the kind of prerequisites:

  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ------------------------------------------------------

  References to Vista also apply to Windows 7.

  Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
  to install - make a right-click on the pilot - run as administrator.

  Also check with your support and the Forums printer manufacturer.

  --------------------------------------

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - devices and printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Windows 7
  http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989

  Windows 7 Service Pack 1
  http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Example: officejet j4580: why my printer say my appears not connected to my computer

  Why my printer say my appears not connected to my computer

  Hello @momodeda!

  Thanks for posting on the HP Forums!

  I don't know why the computer does not show the printer offline, but I would be happy to provide help to try and get communicating them again!

  The first thing I would suggest is to power cycle all the devices.  Remove the power to the printer, shut down the computer and remove the power to the router.  Wait 20 seconds, then reconnect the router.  Wait for the lights on the router to return.

  Plug the printer in and turn on the computer.  Once all devices are back on, try printing again.

  If this does not work then I would recommend uninstalling the HP software.  Once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you must restart the computer and reinstall the HP software.
  
  To uninstall the HP software, click here: uninstall the HP software
  
  To perform a disk cleanup, click here: perform a disk cleanup
  
  To download the HP software, click here: HP Officejet full feature and driver software

  If please, after back and let me know how it goes!

• Print Preview option is not available in the preferences

  How can I set up my printer Epson stylus photo R 360 to preview before printing. It is not available in the preferences.

  Hi Alfredet,

  Thanks for posting in the Microsoft Community. As the description provided, you are not able to find the preview option before printing to the Epson printer.

  Also answering these questions that would help us to provide the best solution:

  1 do you have the preview option before printing in office, wordpad...?

  2 have had any changes made to the computer before the question?

  The print preview option is a third-party feature that is available in some Epson print drivers. This option is not related to the print preview options that appear in many programs. The third-party products that are discussed in this article are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  Visit this link, ignore the title and send more information:

  http://support.Microsoft.com/kb/282120

  Try to update the drivers from this link and check:

  Software drivers &

  http://eSupport.Epson-Europe.com/ProductHome.aspx?LNG=en-GB&data=wsMoc1iChVELSQlOs2ChrT1xObUtDfIMeyQhNOhIkKwU003D&TC=6

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• HP deskjet all-in-one 2540: printer saying phone we not available - it is not

  Phone says printer is not available, but it is

  Thanks wil give that a try. Tried turning off printer but not the phone. Thanks for your advice

• Why is - XPS 13 base model not available in India

  Hi, I am interested in buying a Dell XPS 13, no touchscreen version, 5th gen i5 in India.

  But only one model of XPS13 is available in India, the touch with the 5th gen i7 version.

  I would like to know why Dell has not released all versions in India, and if they do so, how long I have to wait for this?

  Hi Sambitghosh22,

  Thanks for your message and your suggestions for products in your area.

  Products are available in different countries depending on several factors, some of them are the customer demand, availability of parts, the available technology, legal implications and profitablility.  It is possible that many of these types of factors is not available in your market right now, but maybe in the future.  I'll be happy to post if I get more information.

  Kind regards
  Robert

• Why Windows Genuine Validation code is not available?

  I upgraded to Win7 Pro, then tried to download XP Mode. It compels me to do a validation of Windows. It will download the file GenuineCheck.exe. When I run it, I get the following error:

  Windows Genuine Advantage

  Code is not available. the validation code could not be obtained. This is perhaps due to technical difficulties, or you may be runing an unsupported operating system. Please close this window and try again the validation process or use the back button in your Web browser to return to the Download details page. [Error code: 0x80072f07]

  I rebooted and go through this process several times, all with the same result.
  It is an ASUS CM1831 system has a processor AMD FX-8120 with Win7 installed originally.

  How to do this? If I can't go past this message, how to download XP Mode?

  Hi Philippe,.

  Thanks for posting your query in Microsoft Community.

  I understand from the information you have provided to us, you are facing problems with Windows Genuine advantage in Windows 7. I will certainly help you in this matter.

  I would say allowing you to run the Microsoft Genuine Diagnostics tool then copy and paste the results into an answer here for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012

  Also I suggest you to check your product key and report to Microsoft about the issue.

  Check out the following link to report to Microsoft.

  https://www.Microsoft.com/en-us/howtotell/CFR/report.aspx

  Using the windows-related issues feel free to post on the Microsoft Community Forum.

• Why the new dehaze feature is not available on the standalone version of Lightroom 6?

  I bought a stand-alone version of Lightroom 6 and see the new dehaze feature is not included, because it is in the CC version. This will be available in updates and especially can I get updates on a standalone version?

  6 Lightroom has the features that have been included, when it was originally released. The dehaze was not available at that time, even in Lightroom CC. Lightroom 6 does not receive updated functionality, only the camera support and bug fixes. All new features will be saved until / if Lightroom 7 is released. Then, you will need to decide if you want to upgrade. This upgrade will be a paid upgrade. It is not free. In the meantime, Lightroom CC will receive periodic updates which may include additions and changes to the features. Historically, Adobe has not updated in version updates. New features were only added when a new major upgrade became available. So there is nothing different in the policy of the service. Because you purchased Lightroom 6, you have all the features that were part of this program. You will have to wait for the next update to receive all the new features.

• Why the filters Gallery is not available in 16-bit mode?

  I use CS 6 is on a Mac under OS 10.8.5.

  I scanned an image using Capture of Image that has converted to a tiff file. I open the tiff in Photoshop and discovered that the filters Gallery was gray.

  I opened an older Photoshop tiff and looked for differences. The oldest, in which Gallery of filters is available, was an eight bits per channel document. The news is 16-bit per channel. When I changed new one to eight bits per channel, the filters Gallery became available.

  If my (very limited) interpretation of technology is correct, there is more information in 16 bits per channel and so probably a richer quality image. The general principle of course I prefer not to lose any wealth. Is it possible I can get Photoshop to give me access to the Gallery of filters in a 16 bit per channel mode?

  The filters in question were never written to work on 16-bit files.

  That is the reality.

• Why versions CC of applications are not available on CC?

  I just bought a bunch of creative and downloaded cloud forward the application manager to download first Pro CC because it has a feature not available on CS6.  Was quite dismayed to see that CS6 versions available on CC.  If the CC version is not available on CC, where and when can I get?

  It is useful to read the ads correctly... CC versions will be available starting June 17.

  Mylenium

• CS5 print in PDF is not available

  Greetings

  I am not an experienced or professional Illustrator user but have created several PDF files up to a couple of weeks without problem.

  Today I am trying to export or print to PDF and the PDF option disappeared for export and save dialog boxes. The only option for printing is Adobe PostScript file (I have no printer connected). The option is not available in any of my files HAVE. Finally, I printed 3 weeks ago and had no problem. I don't think I made fundamental changes to the configuration of the Illustrator.

  I'm using CS5 15.0.0 on a MacBook Pro under OS Lion 10.7.2.

  I'm sure it's an easy fix.

  Popular ideas

  EskimoPieX

  OK... then print... and export... work out, except as the fact.

  All very well. Panic at the wire.

  Thank you

• How to restore the new tab button in the navigation menu when it is not available in the Customize?

  The new tab button disappeared from my navigation menu. None of the changes or upgrades have been made. While all subjects of support suggest going to customize the toolbar, the new tab button is gone either. There in the morning, disappeared in the evening without apparent reason. The + is at the end of the series of tabs, but not in the navigation toolbar and tab add + is NOT anywhere on a page it there is that a single label. I HIDE TAB BAR WITH ONE TAB 1.1 but have had for weeks, and the new tab button was always there. How to restore the button tab on the Navigation bar if it is not available in the choice to customize the toolbar?

  Don't you see the new tab button on the tab bar if you open the window customize?

  If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar configuration

  You can check the problems caused by a corrupt localstore.rdf file and try to delete this file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• Why e-mail is-address is not available for use as a new Apple ID?

  Try to put in place the new Apple ID for my wife. His e-mail address IS NOT currently used as identification code of Apple however, I get a message "this e-mail address is not available for use as a new Apple ID." I tried the routine julien inconu and only checked no apple ID used for this email address. Anyone has any ideas what would cause this and how to release this email address, it can be used?

  Thank you very much.

  The e-mail address is not used an additional/alternate e-mail on your account (http://appleid.apple.com)?