Why is that Safari stall loading sites?

Similar Questions

• Just updated to Firefox 29.01 it does not at all. When I opened it that won't load sites that shows just the busy circle floating around forever. It is unusable.

  28 Firefox worked fine, but when asked a pop up opening firefox update to 29.01 I found there was a lot of security issues for 28 so I've manually updated to the 29.01 by going in "subject, check updates, etc." Once downloaded 29.01 and got told to restart, I restarted firefox. When I opened it, I found that it is unusable. It will not open a single Web site. It does not load my homepage. It has all my before Favorites from the Favorites toolbar, but I can't go to anything. I closed and tried to run cc cleaner as I always do, but I get the message "firefox takes too long to close would you like to force a shutdown", but the forced shutdown does not close it no more. I opened the Task Manager to try to close it from there, but firefox does not appear. I don't know what to do. I am all this typing chrome b/c I can't use the latest version of firefox. I've never had this happen before. I also ran in safe mode and it's the same thing. Please help and please answer in simple terms, because I'm not a computer expert. I took a few screenshots I'll join. In fact, I don't see anywhere to attach a picture so I can not. Also, I don't understand the green "add automatically" button which is located under this box on the support page of mozilla. Also, when I went to help, on the page in the upper corner of firefox just now to check the version it says "firefox is updated by another body." That the devil which means? Never seen it ever. Appreciate any help.

  Well, then I can say happily that I'm typing this on firefox yay! I managed to do work, and here's how it is for everyone who is having this problem (well at least this is the solution that finally worked for me). RESTART your computer. NOT simply stop there. It does not work (not for me at least). I rebooted the computer initially there are a few min b/c my was not analysis Norton and I wanted to analyze the new 'new installation' I had to FF. After the computer has been restarted, my norton worked. So I said Hey, maybe I'll give you my FF update 29.0.1 a last try before you install a new firefox, in the hope that maybe restart the computer would have worked. So I opened it and omg he loaded my homepage. It works! In addition, among other first problems I've come across is impossible to bookmark a site. I found the solution. Just go to the upper menu right (it has 3 horizontal lines) and right-click the little star icon that we're used to that means bookmarks. A small menu will appear. Click on "move to the toolbar", and which should put it on the top right of your browser so that you can bookmark things. Hope the tip of restart helps anyone who was having the same problem I was Firefox being unusable! And if you have the bookmark problem, hope it helps you too. Wow. I am so happy that I can finally use FF now! Also, I kept the setting of "no hardware acceleration off the coast." Do not precisely know what that did, but leaving since that works. Oh, one last thing: I closed FF and ran cc cleaner and had NO problem with her telling me that FF would not close. Then restart the computer that solved this way. Yay!

• use of Safari to load later when loading the page when the site now page cache how to return to the old

  Until recently Safari always loaded latest version of the web page when I visited a site.

  Now what goes to the same site again the page caching is l

  Clear your caches.  Go to Safari Preferences-> advanced and down, make sure that ' see her develop menu in the menu bar "is checked.  Then, after see you developing in the menu bar, press Command + Option + E to empty.

• Safari now load of items from the new york times or IRS Web site

  Safari now load of items from the new york times or IRS Web site

  I tried to change the notifications including to get rid of all the

  I encouraged webgl and plug-ins

  In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data Web site

  Quit and then relaunch Safari a try these Web sites.

• Latest version of Firefox has problems loading sites, trying to load Google Analytics. No error message, just a page that won't load. How can I stop this?

  Latest version of Firefox has some sites loading problems, it tries to load and gets then supported loading Google Analytics. No error message, just a page that won't load. How can I get rid of this, it is a "pain in the neck."

  URL of affected sites

  http://

  Which websites do you have this problem?

• I put in a new windows xp en my cable internet is not werking why is that what I need to down load drivers from dell for this

  I put in a new windows xp en my cable internet is not werking why is that what I need to down load drivers from dell for this

  Your Internet drivers are not part of XP. If you bought the device from Dell, you have other records besides that reinstall drive? I had 3 machines from Dell and they all came with the CD of drivers among others.

• When I go on the site of adobe and then try to download the software, a message appears saying that safari can't open a page that starts with "Mao."

  I bought a subscription to a cloud creative adobe Photoshop and Lightroom. When I go on the site of adobe and then try to download the software, a message appears saying that safari can't open a page that starts with "Mao."

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• is it possible to make a Web page expires? Is there a setting in dreamweaver or html text that will make a site Web do not load a page after a certain date?

  is it possible to make a Web page expires? Is there a setting in dreamweaver or html text that will make a site Web do not load a page after a certain date?

  You should probably give us more info on what you are trying to reach.

  I have Web sites that display information on the courses, with the possibility to register online. We do not want the announced course when their departure date has passed, so they are automatically removed from view. In this way, we have thousands of courses by year announced without worrying that the old courses are still on Web sites.

  To do this, the PHP and a database are used. Registration of database includes the date, which is verified by the query sent by PHP.

• How can I get the model of web site of the "Safari Lodges can" that is on the Site of the day web page?

  How can I get the model of web site of the "Safari Lodges can" that is on the Site of the day web page?

  Hi George,.

  The site to which you refer does seem to be a template that you can get your hands on, however, I suggest that you contact the owner through their contact us page and see what can be done.

  - Abhishek Maurya

• After downloading the update for Yosemite 10.10.5, I got an annoying popup with a beep sound blaring that says that Safari crashed. I've forced to leave Safari, rebooted and popup returned once more. Restarted again and popup went. What was it?

  After downloading the update for Yosemite 10.10.5, I got an annoying popup with a beep sound blaring that says that Safari crashed. I've forced to leave Safari, rebooted and popup returned once more. Restarted again and popup went. What was it?

  Open Safari while holding the SHIFT key

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• How do the firefox stop, a loading site when a new address is registered or a new link/bookmark is clicked?

  When you enter an address in the address bar that represents a place of slow loading (or even a site that does not exist) and then immediately after hitting enter change address link to a site that loads faster you will reach the last registration site. But after a while firefox will return to you at the address you entered first of all, on the site it represents or a page that contains a message that the site cannot be loaded.

  This problem often occurs when you type the wrong address and quickly corrected it.

  Reproduce the error with the following example:
  1: enter "awaawefawefsdfj.com" (or another site existing none) in the address bar and press ENTER.
  2: after quickly replace the address with "google.com" (or another fast loading site) and press ENTER.

  It displays first page of google and shortly after viewing a page with the error message.

  So my question is: this problem can be fixed with the settings?

  You can provide this feedback to developers here-
  https://input.Mozilla.org/en-us/feedback

• Why doe iPhoto want to load all the pictures my camera took ever when I want just to upload 3 photos?

  Why doe iPhoto want to load all the pictures my camera took ever when I want just to upload 3 photos?

  I have just three pictures I want to load my usb for my macbook camera style

  Hey FYI Apple

  Where is edit?

  This is how it should look.

  Why does he want iPhoto to load every photo, my camera never had (since the update) when I just want what he upload 3 photos?

  I have just three pictures I want to load my usb for my macbook camera style.

  The camera has only 3 pictures on it, but iPhoto seems to have a memory of each photo, that I took because I've updated to the latest iPhoto and it wants to load on the page which is for the camera.

• Firefox is not fully load site Barclaycard of authentication. It load regarding the demand for certain letters in my password but does not load the button 'Submit', so I can't continue with my purchase and I switch to IE8 browser to buy whatever it is ov

  Firefox is not fully load site Barclaycard of authentication. It load regarding the demand for certain letters in my password but does not load the button 'Submit', so I can't continue with my purchase and I switch to IE8 browser to buy anything on the internet. Clues?

  This has happened

  A few times a week

  Is a few weeks ago

  Your UserAgent string in Firefox is totally messed up by another program that you have installed and Barclays does not know you use Firefox 3.6.6 - it is probably similar to IE 6.0 on this site.
  http://en.Wikipedia.org/wiki/USER_AGENT

  type of topic: config in the URL bar and press ENTER.
  If you see the warning, you can confirm that you want to access this page.
  Filter = general.useragent.
  Preferences are "BOLD", a line at a time, and then select reset, right click
  Then restart Firefox

• RECENTLY I HAVE WINDOWS 7 PROFESSIONAL 64-BIT AND THAT YOU CANNOT LOAD LABTEC WEBCAM MORE.

  RECENTLY I HAVE WINDOWS 7 PROFESSIONAL 64-BIT AND THAT YOU CANNOT LOAD LABTEC WEBCAM MORE. I GET THE MESSAGE 'THIS PRODUCT NOT DESIGNED FOR YOUR OPERATING SYSTEM' I TRIED TO GO ON THE LABTEC WEB SITE AND DOWNLOAD DRIVER FROM HERE, BUT STILL WILL NOT WORK. CAN ANYONE HELP?

  Hello

  Please, do not type in capital letters as it is difficult to read and considered to be shouting.

  -----------------------------------

  As you know that there are no Windows 7 drivers for this camera. Check with the support of Labec.

  Labtec Webcam software
  http://www.Labtec.com/index.cfm/service/listing/APAC/en, crid is 68, crid2 = 1764

  Labtec support
  http://www.Labtec.com/index.cfm/service/splash/APAC/en, CRID = 3

  ----------------------------------

  You can try loading the latest driver available in Compatibility Mode which sometimes
  work however, it isn't anywhere near a sure thing.

  Exhausted all other methods in the Troubleshoot utility above before trying these.

  Logon as ADMINISTRATOR for all of them.

  You can try Compatibility Mode but this rarely works on the device drivers.

  Right click on the driver executable (.exe) file - select Compatibility Mode

  In the drop-down menu choose XP or Vista and Service Pack (if it is the version
  "you try the drivers).

  Click OK, and then let the race to see if it will install.

  =================================================

  It also rarely works on the device drivers but it is worth trying:

  Another method to try is to run the .exe (if self extraction) or Unzip (if it is compressed) to a folder:

  How to open a high in Windows 7 command prompt
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

  Open an elevated command prompt : (probably looks like this)

  C:\Windows\System32 >

  CD \the path to this folder as C:\User\Your user Name\Camera_Folder or whatever the path
  is the folder where the driver is unpacked.

  In this case it would be \User\Your User Name\Camera_Folder CD and would look at the prompt:

  CD \User\Your user Name\Camera_Folder >

  This in type at the prompt and press ENTER.

  -I - one *.inf PnPUtil

  It will take a little time to respond.

  If it does not (error) use the full path to the driver, for example (which can be used for)
  "no matter what guest):

  PnPUtil-i - one C:\User\Your user Name\Camera_Folder\*.inf

  Still wait to see if it will install.

  How to open a high in Windows 7 command prompt
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

  The PnPUtil command syntax
  http://msdn.Microsoft.com/en-us/library/ff550423 (vs.85) .aspx

  PnPUtil.exe - operating instructions
  https://www.faultwire.com/file_detail/PnPUtil.exe * 28200.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When I open Firefox, in addition to my original place, I have another tab that opens the same site without my asking for it. How can I get rid of this nuisance?

  The offending site is loaded in a second tab as well as my home page when I open Firefox. How can I stop this loading site automatically?

  Hi lennynyr,

  Out of curiosity, what is the additional site? You should take a look at the Knowledge Base How to set the home pagearticle.

  There are the steps in this article to reset your preferences on the default home page. I would try everything first to clear all strangeness. If it works, you can try to set your homepage again to your personal preferences.

  If this does not work, you should look at article unsaved Preferences.

  Hope this helps!