Why is - this vi gives the result of wrong time?

Similar Questions

• failure of the SIM, why I this message all the time?

  failure of the SIM, why I this message all the time?

  This means that your SIM card is defective or otherwise expired

  Can you make and receive calls and texts?

  If so - go out the SIM card - wait about 45 seconds and re insert it back

  If not - contact your carrier for a new SIM card

  Remove or change the SIM card in your iPhone or iPad - Apple Support

• By using the analytical function to sort without showing this column in the result.

  Hello

  We use the Oracle 11.2

  How to use Oracle Analytics to sort the output of a query without showing this column in the result?

  Here's my query:

  Select distinct nvl(SRC_CHR_NM,'0') | » #'|| NVL(EXPL_SRC,'0') | » #'|| NVL(DIM_NM,'0') | » #'|| NVL(DIM_CHR_NM,'0') | » #'|| NVL(DIM_CHR_ABR,'0') | » #'||

  Decode (InStr (NVL(SRC_COL_NM,'0'), 'trim ('),'1 ', Replace (NVL(SRC_COL_NM,'0'),'trim (',' trim(PRM_DTL.'), '0',' PRM_DTL.)))) » || NVL(SRC_COL_NM,'0')) AS ALLOFIT,

  DIM_NM

  from EXPL_CONFIG where SBJ_AREA_CD = 'PRMDTL. '

  I want to use analytical to sort by DIM_NM but I do not want to show. I want to just just the ALLOFIT column to show in the output.

  Something like "row_number() over (order by DIM_NM desc).

  Thank you!

  Hello

  If you SELECT SEPARATE, then you can only ORDER OF things in the SELECT clause. (Do you really need to do SELECT DISTINCT?  Often, it's just an inefficient way to remove the lines that do not need to be there at all).

  Move making the SELECT DISTINCT in a subquery and make the ORDER BY (and nothing else) in the main query.

  I hope that answers your question.

  If this isn't the case, please post a small example data (CREATE TABLE and only relevant columns, INSERT statements) and also publish outcomes from these data.

  Explain, using specific examples, how you get these results from these data.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002#9362002

• Panoramic rotation hangs or gives the "result will be to the great" despite the abundance of assigned unused RAM.

  It's 32-bit Elements11 and Elements13 64-bit for Windows.

  I do a lot of panoramas from several photos glued together with Photomerge function.

  When you try to set the slope horizont after merger with manual rotation I get the error "the result will be big" in 11 items on both Windows Vista 32-bit and 64-bit Windows of 8.1.

  8.1 winning RAM max preferences of use was set to 100% 11 elements being only 32-bit program and don't recognize 3Goctets - but I have 8 GB installed.

  When I select the elements of function "Rotate-> Autorotate" stands forever cpu consumption but it never ends the function (at least 30 minutes).

  So, I bought and installed 13 elements version on 64-bit Windows, to 8.1 since Elements13 is 64-bit and should be able to use more RAM available.

  But the same thing is happening here, I adjusted the preferences to use 85% of the 8 GB of available RAM but elements exceeds not using the the / 3Gb and stalls autorotation the same image.

  Autorotation is to always consume cpu power but does never extend the use of the RAM and never complete the rotation.

  The I am Image editing is saved without layers in a flat file jpg and 30Mbyte only in size, but the element points out (in the bottom of the picture frame) to be around 500 MB internally when opened for editing.

  Why do Elements13 not use all the RAM I assign in prefs, and why the items 11 and 13 stall autorotation without giving an error message appropriate?

  And why 13 elements in 64-bit version running on Windows 8.1 in the 64-bit version fail to autorotate or "manually turn" this relative small jpg 30 MB even when file?

  It is possible that has nothing to do with pse not really having enough ram, but the size in the size in pixels of the pano himself.

  As the editor of photoshop elements has a size limit in regards to the pixel dimensions which can be an image, 30 000 30,000 px x px, if you pano is close to this limit, rotation will add to the pixel dimensions

  and so possibly put the pixel dimensions exceeding this limit and this is the reason for the error "the result will be great."

  If you have to Image > resize > Image size, what are the Pixel Dimensions of the pano before trying to turn it?

• This query gives the original sequence that increment of original value and start with original number?

  Thank you!

  Select dbms_metadata.get_ddl ('SEQUENCE', 'COURSE_NO_SEQ') of double;

  Hello

  No it will not give the sequence. This u give query will be, how U created the sequence, I mean how u written code for the design of this sequence. That's all...

  After you generate the query, you can use it in another schema, if the sequence is not available with this same name. After you have compiled successfully in other patterns, this sequence will start to give the starting number sequence number...

  See you soon!

• Why is this anchor on the side?

  Hi all!

  I hope someone could help me solve this problem of anchor point in adobe illustrator CC because it is very difficult align objects with this anchor on the left side (see arrow pointing towards the anchor point). Is it possible to reset back to the Middle as if it were in CS6?

  Thank you.

  

  It is on the left, because your text is left aligned. If you want in the Center, then Centre align the text.

• My fans of computer laptop vaio works constantly. Is this normal. The results in short battery life.

  My Vaio VGN-SR220j fan runs constantly and the computer seem to always warm.  Therefore, the battery life is only 90 minutes for a new battery.  What can we do about it?

  
  

• The simultaneous output file is XML if the result of the Template is set to Excel. Why?

  Hello

  A simultaneous program that I run is supposed to give the result in the form of an Excel spreadsheet.

  The model has the default output Type: Excel. And the output format of simultaneous program: XML.

  Currently, it returns the output as XML data in the definition of data in a new tab in the browser. What should I check to make sure that the Excel output is obtained and that the model is obtained as a result

  PS: Using the model for WORD generator plugin. And apply the XML obtained my rtf file-> I get the expected result. Overview: PDF

  Why it does not work using the simultaneous program?

  Thank you in advance,

  ATP

  Answer: I solved the above problem by using the following steps.

  The part of the publication of the log file is missing. Once this has been noticed a the OPP service log gave more details. There was a certain Ref that wasn't.
  So returned to watch the RTF, since it was the breaking point, and it has been identified.

  It details of the agenda were not visible without loading an XML. When I double click on without load the XML file I got an error "compiler error. Hidden module Module_EditFF... »

  After searching on Google, the answer was clear: Oracle Applications: in the hidden module compilation error: Module_editFF in Oracle BI Publisher

  My BI editor caused me trouble in the last days and sanitation of and re - install it works like a charm.

  Problem solved. Loaded my RTF using the new organization. Double click on the field element and set the details I wanted by using the 'Add a text to help..' button and using the bar of tabs 'State' and the (F1) Key "help".

  Reloaded the model ran simultaneous program ==> Excel output.

  Voila!

• Web pages load more slowly than normal. Why is this? I did the update to FireFox.

  Pages take a while to load. Firefox is slow. Internet Explore will be charge the same pages in no time. Why is this? I had FireFox for some time and never had any problems. It lasts for months.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  If you have security software (antivirus, firewall etc.), you can also try to check by disabling it temporarily, turn on the Windows Firewall and browse a few well-known websites without downloading or installing anything. You can also disable (uncheck) Enable Javascript in Firefox Tools (Alt + T) > Options > contentand turn off the Plugins in Tools (Alt + T) > modules before checking it in.

• Unexpected for the result of the loop

  I am trying to increase the alpha property of a text field for a fade effect using a loop when I discovered a problem with the loop itself. I added a trace statement to the following bit of code:
  
  < CODE >
  
  Loop for increase the alpha of 1 textframe property until it reached a value of 100 from 0. I put
  TextFrame._alpha = 0 in this.createTextField("hello_txt",0,10,10,100,20) () in front of this code.
  
  for (i = 0; i < = 100; i ++) {}
  
  TextFrame._alpha = textframe._alpha + i;
  trace ("Although (i) =" + (i) + ", textframe._alpha =" + textframe._alpha + "you NOOB." "");
  
  }
  
  < END CODE >
  
  This loop gives the following:
  
  Although (i) = 0, textframe._alpha = 0 you NOOB.
  Although (i) = 1, textframe._alpha = 0,78125 you NOOB.
  Although (i) = 2, textframe._alpha = 2,734375 you NOOB.
  Although (i) = 3, textframe._alpha = 5,46875 you NOOB.
  Although (i) = 4, textframe._alpha = 9.375 you NOOB.
  Although (i) = 5, textframe._alpha = 14,0625 you NOOB.
  ...
  Although (i) = 100, textframe._alpha = 5031,25 you NOOB.
  
  I have removed the traces 6-99 for the purpose of saving space here. As you can see, textframe._alpha does not (i). This code always gives exactly the same result to decimal.
  
  (I know I must add a setTimeout() or setInterval() to delay the effect of melted and I need to break the text on screen and overthrow the alpha for fade effect, etc.).
  
  It's true I'm 'Factor 10 of NOOB'. However, I'm making progress! Thanks ahead for any help, noting in my pea brain why it happens. I guess I have a problem of not data synchronization type problem but I would not stake my life on the fact that I am mistaken :) All this code is in a movieclip nested Framework 1. I plan on the development of this fade in/out effect over the same timeline while changing the text itself. I decided to go this route instead of trying to do this with clips on the stage, I thought it would give me more control and less drawing. See you in 8 days.
  

  Try:

• Want 4504: Hp Envy 4504 does not give the impression of color

  Hello

  My Hp Envy 4504 gives color impressions.

  Its keep giving only black & white or gray scale images.

  Also, I couldn't find the printing color profiles or presets under the printer settings.

  I only 'Black and White' and ' black and white - gray ' presets.

  What should I do to get the color print.

  I have two hp color and black ink cartridges installed.

  Help, please.

  Thank you

  Hi @sivak,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print in color on your HP Envy 4504 printer. I will definitely do my best to help you.

  You are able to print a test highlighted report? The printer prints a blank Page or does not black print or ink color for the HP ENVY 4500 and Deskjet Ink Advantage 3540 e-all-in-One Printer Series.

  The problem only occurs when printing from Mac? It seems that there is a problem with the printer driver. Please see these instructions by my colleague Anti-double-U-di.

  Publish:

  10.10 yosemite, foot, make sure you have the latest updates, including Apple updates as well as updates from HP by Apple Software Update (ASU), currently HP printer software update Ver3.0

  Look for the updates (ASU) Apple
  1. click on the Apple in the left menu bar
  2. click on "about this Mac".
  3. click the button of "software updates... »
  4. make sure that the "Updates" icon is selected, click on 'Store' in the top menu
  5. click on 'reload the Page.
  6. install the HP updates (look for the last 'HP Printer Software Update"by the version number)

  Note: If you can't print or scan if he is an all-in-one HP printer, and then follow the steps below.

  Delete the print queue HP printer
  1. click on System Preferences
  2. click on printers & Scanners
  3. click on your printer HP to highlight, then click on the "-" symbol below to remove it from the queue
  4. click on the button "Delete printer" to confirm
  
  Add the HP printer in the print queue
  1. click on the symbol '+' at the bottom left
  2. If a drop down list with the printers menu appears, just click on "Add printer or Scanner..." »
  3 select your printer HP printer or series (depends USB/Ethernet/WLAN connection type, so choose your HP printer with the correct connection, IE Hello for printers single function and Hello to an MFP multifunction)
  4. after the lower filled, click on the drop down menu to "use:" and select your HP printer series
  5. click on the ' Add ' button.

  Try to print in coiour.

  If the steps above resolved your problem, you don't have to continue troubleshooting.  If you're still having problems, please continue to the next step.

  Before continues, the following steps will remove all printers to printers and Scanners, you may need your software and drivers for the printers to re - install if it is not part of the Apple software updates.

  Reset the printing system:
  1. open System Preferences
  2. open Printers and scanners
  3. on the left side where would be referred to as printers, right click and select "reset printing system...". »
  4. click on the "Reset" button when asked to confirm
  5. Enter your password, and then click OK (if prompted)
  6. Once completed, (notifications cannot pop up) you will simply see the Virgin 'printers & Scanners', just close

  Remove the software from HP/Hewlett-Packard:
  1. go on 'Finder '.
  2. go in "Applications".
  3. Locate and open the folder "Hewlett-Packard".
  4. If you see an "Uninstall HP program" listed here then run the uninstall program, otherwise, go to step 8
  5. click on the continue"" button.
  6. Enter your password, and then click OK (if prompted)
  7. When you are finished, click "exit".
  8 remove the HP folder or Hewlett-Packard (if still listed after uninstall) drag the folder to the trash
  9. right click on the Recycle Bin in the dock, click on "Empty" - and then confirm to empty the trash

  Repair disk permissions
  1. in the Finder, click Applications
  2. open the Utilities folder
  3. double-click on the disk utility
  4. on the left side, click on the hard drive which has Yosemite 10.10 installed to highlight
  5. click on the "repair disk permissions" nearly half lower the window (time may vary to finish)
  6. what repairs completed, a message near the bottom window 'Fix full permissions', now you can close the disk utility
  7. click on the Apple in the upper left corner, click "Restart" to restart your Mac

  Manually the drivers of HP printer install v3.0
  1. this link will take you to the apples for v3.0 HP printer drivers download
  2. click on the button 'Download' (remember where your download is if your downloads are not on the dock)
  3. open the "HPPrinterDrviers3.0.dmg".
  4. double-click on the "HewlettPackardPrinterDrivers.pkg".
  5. click on the continue"" button.
  6. After reading the license agreement, click the continue"" button.
  7. click on the button "I agree" If you agree
  8. click on the drive that Yosemite 10.10 is installed on and click on continue
  9. click on the 'Install' button (this will install the drivers for HP to your Mac)
  10. Enter your password, and then click the button 'Install Software' (if prompted)
  11. click on the "Close" button when the message "installation succeeded."

  Add a printer to print the queue
  1. open System Preferences
  2. open Printers and scanners
  3. click on the symbol ' + '.
  4. click on "Add a printer or a Scanner..." »
  5. click on "HP Envy printer 4504.
  6. click on the drop down menu to "use:" and choose "HP Envy 4504 Series."
  7. click on the ' Add ' button.

  Try to print in color.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Working with the results of the Action generated Poweshell

  Hello

  I have an action from orchestrator of a powershell script/function that I use regularly. The function is supposed to return a System.Object with email content (n, fromAdd, body, etc) that I would use in a script task.

  The problem I'm having is that I can't access these results in my work of scriptable. I know that the performance of the action a PowerShellRemotePSObject (and I have reviewed the literature on 'Working with PowerShell results'), but none of my attempts to explore the values give the results, I'm looking for. I'd appreciate any help to know what I'm missing.

  Thank you

  Thank you once again Ivo. Sorry for the delayed reactions. I took a peek at the solution you provided but had a few mistakes - there was no GetFilter() function defined for the call to psObject.getRootObject () .getProperty ('from'). After fiddling around with the results, I found my solution.

  I basically closed the rootobject of the return value of invocation of script that turns out to be a collection data structure (last result in the enumeration in italics/bold).

  .....

  rootObject var = psObject.getRootObject

  (rootObject element)

  {

  System.log (rootObject [index])

  }

  [10:43:33.159 2013-12-10] [I] DynamicWrapper (Instance): [PowerShellPSObject]-[class com.vmware.o11n.plugin.powershell.model.result.PSObject] - VALUE: com.vmware.o11n.plugin.powershell.model.result.PSObject@e9e592

  ....

  It turns out that the value of back in my Powershell script is the last element in the collection. from there, I could get my values:

  System.log (rootObj [rootObj.length - 1] .getProperty ("to"));

  System.log (rootObj [rootObj.length - 1] .getProperty ("from"));

  System.log (rootObj [rootObj.length - 1] .getProperty ("Subject"));

  System.log (rootObj [rootObj.length - 1] .getProperty ("body"));

  System.log (rootObj [rootObj.length - 1] .getProperty ("logFile"));

  I don't know if this will always be the case with psObject return values of Powershell called scripts, but several tests will help.

  Thanks for your time.

• iTunes says my iPhone 5 c is 8GB, but says he has a 5.15 GB capacity. Why is this?

  I noticed this for a while now. iTunes and my iPhone 5 c case came in says it's 8GB. But looking at storage left on my iPhone and iTunes, it seems only 5.15 GB. Why is this?

  The iOS operating system and apps alone can explain the difference.

  http://www.huffingtonpost.com/2015/01/08/iPhone-free-space-tips_n_6269756.html

• Fill a table with the results of the refresh groups

  Hello world
  
  I need a little help.
  
  I'm working on an Oracle 10.2.0.4 on windows.
  
  I have a table I created like this:
  Table name: DIM_REPLICA
  
  COD_SEZ VCHAR2 (2)
  NOME_SEZ VCHAR2 (20)
  FLAG TANK (1)
  DATE OF D_REPLICA
  
  This DB I have 210 discount groups running every night. I need fill this table with the results of the refresh groups.
  
  So when the refresh for example called ROME group runs I need to write on the table the name ROME in the field "NOME_SEZ", a Y or N if the refresh Group has worked in the field of the INDICATOR and LAST_DATE refresh force ran into the field of the D_REPLICA. The COD_SEZ field is a code that I get other things. It is not necessary for the moment. I can add it myself on my own.
  
  Can someone help me please?
  
  I was looking on the tables SYS DBA_JOBS and DBA_REFRESH these data, but I don't know what to take and how to fill the table. Trigger? Procedure? Any help will be great!
  
  Thank you all in advance!

  This forum is for SQL * PLus, questions and your question is about general issues Oracle. You will get a better response by posting your question in another forum - probably the General database instance.

  Please close this thread and start over in another forum.

• What provision I should give the user access to applications through Smartview?

  Should what I give to the user to access applications via Smartview Shared Services. ?
  
  Access to the server would do? Or I have to give something else?
  
  Requirement is tht the user should be able to retrieve and send data via Smartview.

  You need access to the user with access to the server - this will give the user the possibility to connect to the Essbase server in Smart View only. The user sees all the applications listed.

  Then implement the user as write on each application that you want to see them and to present data.

  Kind regards
  Robb Salzmann