Satellite U200 163 with Vista: UJ-842 drive cannot burn CD - R or CD - RW properly

Similar Questions

• Update the display for Satellite A305-S6861 with Vista (64-bit) driver

  Hi, I want to update the driver for my graphics card. Then I went [which | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2059349& rpn = PSAG4U & modelFilter = A305-S6861 & SelCategorie = 3 & selFamily = 1073768663 & selModel = 2059349% 7CPSAG4U] site and update the graphics driver was for Windows XP.

  I clicked on the download page link which was ATI Display Driver for Windows XP. Model of my PC was written on the list models involved, but my PC is not a version of Windows XP and don't have ATI Mobility Radeon HD 3650 (this graphics card was written on the driver installation Guide).

  I forgot this page and went to the site Web of ATI. I found driver chart download page which is: [link: http://ati.amd.com/support/driver.html]. Chose Vista 64-bit, Radeon and Radeon HD 3400 Series. I should _only_ download the file named "Catalyst Software Suite (64-bit)"? I thought, but I have not downloaded. Because the download that I found on the Toshiba site (that of Windows XP) was 148 MB and the download which is the site of ATI has been 62 MB. Don't know what to do.

  Note that there are 2 options in the ATI site.
  1 includes: display, integrated, ATI WDM driver Catalyst Software Suite (64-bit)
  2nd includes: 2 different downloads: driver of Download1:Display + Download2:Catalyst Control Center (32 bit)
  Which one should I choose (or they are the same)?
  1 pilot + integrated driver + software Suite
  2 - driver + Control Center?

  I use Windows Vista(64-bit) and I have ATI Mobility Radeon HD 3470. Where can I download drivers available for my system?

  Hello!

  Now I have a little confused after I read your ad m.

  If I understand correctly you are running Vista 64 bit and the Toshiba site you posted I also found drivers for Vista 64 bit.
  You can refine the search by Windows Vista 64-bit.

  I n t use drivers graphics they are not Toshiba because they don t have a thermal protection and therefore the graphics chip can be damaged.
  Then download the drivers of Toshiba.

  Good bye

• Satellite U200 163: a bug in the bios with linux

  on my u200 163 (with the new bios 1.3 works well on XP), linux (2.6.17) as Mandrvia 2007 or Ubuntu Edgy new distributions does not start ok. After grub starts, two lines talking about the bios bug and memory address not E820 reserved and not using MMC...?
  Y at - it a bug in the bios? Can I change something in my bios?
  These linux distributions work very well on other PC...

  Thank you!

  Hi ft

  Unfortunately I have no explanation for what is happening exactly to your device, but don t forget that your device is not supported under Linux and also designed for Windows XP.

  Satellite U200 is more recent and it is possible that in a month next someone will do some Linux experience on this unit and reported it here.

  Good bye

• Satellite P100-160 with Vista: No TV-OUT after downgrade to XP

  Hi guys hope you can help me out here...

  I recently bought a laptop (satellite p100-160) with Vista on it to know that it was not compatible with wot I bought dethrone so I decided to downgarde for XP Home Edition... Solange decommissioning that I had to install a few drivers like there's do and everything went well...

  Anyway, a few weeks later (yesterday), I went to watch a movie and when I pluged in my tv out cable, I have nothing. I tried to unplug and plug in again a few times but still nothing, it normally switches on in about 20 seconds... So im guessing that either I need to a driver or a Summit.

  Can someone help me out here?

  Thanks a lot

  You n t need a special driver to use the s-video port.
  You must install only the compatible graphics driver.

  How have you tried to switch to the TV device?
  Have you used the FN + F5 key combination?
  You should do this.

  Connect the TV to the laptop using the s-video port. Then select the s-video on the TV and choose the right channel.
  Press the FN + F5 several times until you get a picture on the TV.

  Please note; Don t start the DVD software like DVD win until you have not enabled on TV!

• Satellite A100-011 with Vista: DVD-ram UJ-850 s can not burn DVDs dual layer

  Hello

  cannot find answers to my problem, so start a new topic.
  Having Satellite A100-011 with Vista preinstalled and Mat * a DVD - RAM UJ-850 s (firmware 1.10).

  Recently installed Nero 7.5.9 and you want to burn DVD (6, 5 GB) media dual layer (Immation - Ritek).

  First time Nero stopped with information: could not perform start of Disc At Once (without damaging the media).
  After that, run Nero as Windows XP - SP2 program and burn half the disc (first layer), but when to start to burn the second layer (I guess), stop once again with the same error information (could not perform start of DAO).

  Simple disc burning layer without problem.

  Anyone any idea how to solve this problem?
  Thank you
  Luci

  Hello

  tried to record double-layer of a different brand? Maybe you should try it, because sometimes certain brands are not really taken in charge or not very well. And check the toshiba (or google) pilot site for new drivers or firmware for this drive, sometimes that it really helps.

  I think that the media are not really compatible, I ve read some similar problems in the roxio forum and they solved by using another brand.

  Would be nice if you give some information on this case... :)

  Welcome them

• Re: Satellite A300-145 with Vista 32 maximum RAM?

  Hi all!

  I have satellite A300-145 with Vista 32 home Premimume - now on laptop installed 2 modules of 1 GB of RAM (for mode dual channel)

  Q: if I replace the RAM to 2 modules of 2 GB of RAM this mode dual channel still & 4 GB RAM?
  -May support A300-145 4 GB RAM? and Vista 32? (Intel GM965 chipset have support 4GB RAM)

  Hello

  Satellite A300-145 was equipped with a Mobile Intel GL960 Express Chipset. Or I m wrong?
  AFAIK this chipset provides only the 2 GB support

  > If I replace the RAM to 2 modules of 2 GB of RAM this mode dual channel still & 4 GB RAM?
  32 bit Vista will recognize only about 3.2 GB.

• After installing Vista, CD/DVD drive cannot be seen or read.

  After installing Vista, CD/DVD drive cannot be seen or read.

  Hi heartmanmd,

  You get the error message?

   

  Run the fixit available in the article below and check if that makes a difference

  
  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Its on a Satellite U200 163 Vista problems

  Hello everyone,

  I try to install Vista Home Basic on my U200 163, but I am facing many problems and really need help...

  My biggest problem is that, after the upgrade, I have no sound on my computer. I installed the latest drivers from toshiba (toshiba American site vista drivers), my chipset is recognized as "Soundmax Integrated Digital HD Audio" and everything seems to be allright, but my speakers as well as my jack cards give no sound. Everything was ok under XP and my sound settings are ok, I even see the volume changes in the sound settings, I've never seen such a problem before... Did someone had an idea?

  Moreover, I didn't find the drivers for sensor HDD and several applications of toshiba important as protector of HDD, energy-saving, indicator of volume, hotkey utility cannot be run...

  I hope someone can help, thank you very much.

  Hey guys

  He thinks that it is today your lucky day :)
  Thanks to the scots_tech of the user.

  He has some problems with the sound on Vista and it solved with the new audio driver from the site www.realtek.com.tw

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19992

  It will be useful.

• Satellite A200-1vp with Vista - code 39 of the CD/DVD drive failure

  Hello

  I was burning and watch DVDs on my Satellite A200 - 1 VP, with vista, since February, the last time I burned anything was a couple of weeks.

  Suddenly, there is a problem, no response when I insert a disc and my divx player says me no recorder found.

  When I am looking in the Device Manager I get the message 'windows cannot load the driver for this hardware' (code 39) "driver is damaged or missing.

  I tried to uninstall it and using the limit filter upper/lower of Toshiba, repair tool but on restart it still cannot install.

  Should I try the Toshiba Recovery Disc and lose a lot of that programs/files, as a last resort?
  Would this work?
  Anyone have any ideas?

  Here's an interesting article from Microsoft Knowledge:
  http://support.Microsoft.com/kb/270008/en-us

  You must first access the Device Manager and should remove the reader of CD/DVD from the list of devices.
  Then should access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop and check if the CD/DVD drive would work again!

• Audio driver does not work on Satellite U400-112 with Vista 64-bit Buss

  Hello

  I installed Win Vista Buss. 64-bit on my Toshiba Satellite U400-112 but the original driver for the Toshiba site does not work properly, honestly does not at all. The only driver that works is a winner. Vista driver but when I plugged in her headphones just got pregnant shape, but there is no sound in headphones.

  Can someone help me, please?

  Hello!

  I have a Satellite U400 with Windows Vista 64 bit also, and I used the driver on the Toshiba site (Conexant 4.36.7.0).
  It works without problems, I can hear sounds with the speakers and headphones.

  Maybe you have an old BIOS. After the installation of Windows Vista, I made an update of the BIOS so try that too.
  The BIOS you can find also on the Toshiba site.

  Good bye

• 3.30 BIOS bug with Linux on Satellite U200 163

  Good evening

  3.30 BIOS does not work properly on my U200 163 (dual boot using Grub).
  (all that has been done on XP Toshiba EU site, with the correct procedures).

  Sometimes the "Toshiba" splash image does not appear, and the image has a hard time (Please note that the arrows to choose the boot option are not available in this case...).
  (Note that this point is independent of the operating system...)
  Sometimes, Grub does not appear (but a start of the first line of the menu).
  My shortcut keys do not work on Kubuntu (they do on the version 1.50).

  I finally go back to version 1.50, which works perfectly with the boot image, Grub, Ubuntu or XP.

  Please note that the changelog information data on Toshiba U.S. and none EU from Toshiba... Why? (not even a link!)
  It would be useful for me to see that I don't have the 3.30 anyway?

  Ford Hi

  As you probably know the BIOS updates are not specifically designed for the Grub, Ubuntu or any other Linux.

  In the first stage, the update of the BIOS has been designed with Microsoft OS and it s compatible with Vista and other products Ms.
  Of course, its a shame that the different distribution of Linux only does not work correctly with the version 3.30 but to my knowledge, Toshiba does not support Linux distributions and you will get no guarantee that any Linux will work fine.

  As you know most of the people want to install and use the Vista and the Microsoft OS and Linux No. So it of your choice to use Linux but in this case you should not use Bios 3.3.

  Greetings

  PS: If it please follow Forum guidelines and do not start different threads on the same topic!

  Update: BIOS 3.4 have also solved the bug of Linux

• Satellite P100-454 with Vista - no sound

  Hi all.

  I just installed Vista once more and everything seemed fine.
  But I have no sound at all.

  I tried to upgrade the Bios and audio drivers but still no sound.

  I have a P100-454 with Vista.

  When I look in "installed" I can see the i not care her but I have a moden called 'HDAUDIO soft data fax modem with smartCP' and in units for sound, I have «conexant high definition smartaudio hd2»

  /Rasmus

  Post edited by: tuxbassen

  Hello

  You said that you have installed the Vista still have you used the Toshiba Recovery DVD?
  If Yes, then the sound must be available, because the Toshiba disk contains all the necessary drivers!

  Satellite P100-454 belongs to the PSPADE series.
  It s a European series of notebook and the drivers are placed on the page of Toshiba Europe.
  There's a Conexant 4.8.0.0.12.14 audio driver
  Have you used this driver?

• Wi - Fi dies in Satellite A100/002 with Vista Business 64-bit

  Hello

  I have laptop Satellite A100/002 with Windows Vista 64 - bit Enterprise edition. My Wi - Fi died shortly after a random time. When I try to search for a wireless network, he found nothing. The only working solution is to restart the computer, and then it works fine until it dies again.
  I have updated the Wi - Fi drivers but it didn't solve my problem.

  It's really annoying especially when I play any game online.
  Can someone help me solve this problem?

  Have you updated the BIOS? Check the Toshiba site for a newer version.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Also try an update of the firmware of the router. You can find it on the site of the factory.

  Last but not least, you must disable the security features of the router for the test. I mean hidden SSID, MAC address filtering and so far.

  Also, make sure that the option of the energy-saving WLAN card is disabled:
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

• Satellite P100-347 with Vista Premium in the United Kingdom

  I am looking to buy the Satellite P100-347, but I want to get with Vista Premium - no upgrade.
  Does anyone know when this machine will be available with Vista Premium in the United Kingdom.

  Thanks in advance

  Joel

  Hello Joel

  I heard that Toshiba will start notebook with Windows Vista at the end of January 2007. Perhaps the United Kingdom will be starts earlier (perhaps it is also a country, I put t know exactly).

  As you know Vista comes with several different versions, but it will be preinstalled on P100, no one can tell you with certainty.

• Do not have "Toshiba HDD Recovery" on Satellite U300-151 with Vista

  I have problem with Vista - it became too slow so I want to get back to factory settings.

  I went through the process described in [http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm] and then, instead of "Toshiba HDD recovery" as a last option-, I have 'Restore the full Windows operating system' which is the last one after 'comand prompt. When I click on that I get another box with warning by saying "when you reinstall windows OS reformats the hard drive and all data will be lost" and "If the preinstalled files are damaged you can use the product recovery disc (which I don't have)" and there are no other or any button except OK which I click and it just brings back me to the list "System Recovery Option"...

  I have Toshiba recovery disc creator no - it was not pre-installed when I bought computer - even if I had all the other software from toshiba.

  And I know that I can buy the recovery disk, but I don't think that pay 30 dollars for something that I should have had with the computer: and my computer is still under warranty.

  Delivered using the recovery media, you will be able to install Vista.
  Recovery image contains all of the drivers, tools and utilities, and after the installation of clean operating system, you should not install some additional software.

  Bye and good luck!