Why is windows 7 so slow to view associated compared to xp network devices and earlier?

Similar Questions

• Why is windows XP so slow

  is it because it comes with so many programs and files?

  Thank you

  Without information about your hardware configuration and installation of the software - it is unclear why * your * Windows XP installation can be slow.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• I can't download attachments in Windows Live, although I can view online when the link is there and can also download zip.

  Cannot download attachments in windows live, although can view online when the link is there and can also download zip. What has happened recently. I was always able to do until recently.

  original title: Windows Live Mail

  Hello

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.

• Why is Windows XP Professional slow to get on the desktop?

  Hello

  I have a Toshiba laptop with Windows XP and it takes a long time to start and join the office. When testing and restarting in safe mode with networking with the wireless connection, the computer is slow, but when I turn off the wireless connection, start in safe mode with networking is much faster.

  Thank you

  LD.

  Hello, LD,

  This question is considered, perhaps, if the PMKCache is loaded again when restarting. This was seen when you use Windows XP SP2 and Windows XP SP3. To work around this problem, you can disable the PMKCacheMode in the registry. To do this, follow the steps below:

  1. click on Start, run and type regedit.exe and then click OK

  2. navigate to the following registry key

  3 HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\EAPOL\Parameters\General\Global

  4. Click to select the key \Global

  5. browse the list on the list at PMKCacheMode

  6 double-click on PMKCacheMode, change the value data: 0, close the registry editor

  7 restart your computer

  This key specifies whether a Windows XP wireless client will perform PMK caching. By default, PMKCacheMode is enabled (set to 1).

  Hope this helps

  Bobby

• Why is-Windows Media Player slow at startup?

  When I run WMP window opens immediately, but it takes nearly 12 minutes to complete commissioning.  During most of this time, the CPU usage is 0%.  All applications starts almost instantly and WMP works fine, once it finally started upward.  The program itself is stored on a conventional disc SSD, while the music files on a hard drive and they total 871 mb.  My system is a processor i5 with 8 GB of RAM, running Windows 7, 64 bit.

  Why do you think it takes so long to start?

  Hi SimonRichards,

  ·         Did you the latest changes on the computer?

  Method 1.

  I would recommend you to rebuild the database of Windows Media Player and see if the problem is resolved.

  Here's how:

  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  1. exit Windows Media Player.

  2. click on start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.

  3. Select all the files in the folder and then click on Delete on the file menu.

  Note: You don't have to remove the folders that are in this folder.

  4. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  Method 2.

  If this does not resolve the problem, disable the Windows Media Player database cache files.

  To do this, follow these steps:

  1. exit Windows Media Player.

  2. click on start, run, type % LOCALAPPDATA%\Microsoft, and then click OK.

  3. Select the Media Player folder, and then click on Delete on the file menu.

  4. restart Windows Media Player.

  Method 3.

  I also suggest you to re-record the files related to Windows Media Player.

  To do this, follow the steps below:

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. at the prompt type regsvr32 wmp.dll command and then press ENTER.

  Type regsvr32 jscript.dll, and then press enter

  Type regsvr32 vbscript.dll, and then press enter

  c. restart the computer and check if the problem is resolved.

  You can also try to turn on or to turn off Media Player.

  For more information, connect to:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I hope this helps.

• Why my raws look different when I view in Adobe Bridge/Adobe Camera Raw and digital P guns

  Hi all

  I'm sorta new to take Raw photos and I have been using Adobe Bridge / Camera Raw to edit. When I take my photos (I use a Canon t2i) I set it to save a raw and jpg. When I find these images in Adobe Bridge / Camera Raw I notice a clear difference in the jpg and raw (I understand the concept behind raw vs jpg. If im not questioning why a different aspect) it is obvious all the adjustments that have been applied to my jpg. gross natural vs.  My question is: when I find the same two images in the software that came with my camera, professional digital photography canon, the canon and believed almost identical look... My hypothesis is that canon applies the same "adjustments" of my own as he did to jpg files?  Anyone using these two programs and noticed it work?

  Thanks in advance for your help.

  Michelle

  Canon software reads the camera in settings and those in the RAW file as the camera software, if applies so the RAW file should open looking like the JPG of the camera.  You can then make adjustments of this starting point.  Adobe and other third party software does not read all the camera in settings and apply instead a default set of conditions for the departure of starting point, which is why the initial image, you see when you open the RAW with Camera RAW file does not resemble the hearing in camera JPG.  Camera RAW's default camera profile is Adobe Standard, which is not the same as the profiles used by the camera.  Camera RAW has it for Canon 550 d camera profiles, which I believe is the same as the t2i.  Click on the camera Calibration tab in ACR (Adobe Camera RAW) and select the camera profile you selected in the camera (camera Standard, trusty camera, camera neutral, Protrait of camera or camera landscape) - all profiles listed are for the camera that took the photo.  This should give you a match much closer to what you get the camera if all other parameters of the camera are nominal values.  You can save a new default value of ACR and in future all images will be open initially using the new default values.

• Why my windows keep freezing?

  Why my windows keep freezing? It's funny because it started to happen after I replied to a few things about illuminati on youtube. But after that, it kept saying error post comment. So I disconnected my account and connected to another one of my accounts, and he says the same thing, so I decided to restart my computer. As soon as he started upward, my request of palringo has started up, and he stopped to load my messages. Then the screen froze, I waited 5 minutes, then held the power button and turned it off, then power on. Done that 4 times more, then finally, it got to the point where the 6th time the only thing that was frozen was the taskbar at the bottom with the Start button and the basics of microsoft security date and time which not. in any case, I could use the rest of my computer, to the point that when I opened internet Explorer, it froze. 7th time... I had taken a break before I'm back and tried this time, and it was a weird breakup cause that is also a lot of things that never happened before, but it finally worked. But my volume control panel went 'again' and it is not picking up my card soundblaster, which idk if the driver went for her or what. But I would like to help with this and perhaps a reason why this happens. I didn't download anything since the last time I have shut down my computer, everything works fine every start until this afternoon when it happened with youtube. idk if it was a virus, hacker or what.

  Hello
  Try following the steps described in the guide: http://www.selectrealsecurity.com/slow-computer
  It provides detailed instructions on how to speed up a slow computer.
  I hope this helps you.
  Brian

• Why doesn't my computer slow and down so often?

  Hello

  Why doesn't my computer slow and down so often?  I have quite a few red errors and yellow when I look where the Viewer, how can I get rid of them?  And also I have Norton installed on my PC Utillities, can this program to get rid of these errors?

  Take a look in the system and Application logs in the errors and warnings event viewer and post here the copies. Do not post on more than 48 hours ago.

  You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.

  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

• Why my computer running so slow and why online games lag and freeze.

  Why my computer run so slow and why do games lag and freeze so often-

  Windows Vista 64-bit on the HP Pavilion DV2 laptop IE9

  Product NX926UA #ABA number

  Start the HP Support Assistant software. Click troubleshooting, and then select each of the options available, except the performance. Delete all Temp files and temporary internet browser files will help you.

  Follow the instructions on this tutorial at home to define your default virtual memory paging size. It's certainly worth a performance improvement you will notice. Don't let not Windows controls the size of your virtual memory paging file.

  Fill your online games can be for various reasons. The most likely reason if you use wireless 802. 11 b or G is the connection. If you have a 802.11n wireless router and the wireless in your laptop card is capable of 802.11n bandwidth and then use it without a doubt.

• Windows 7 suddenly slow and System Idle process CPU utilization a concern

  Almost overnight, my Sony Vaio with Windows 7 (bought in 2010) has worked incredibly slow.  I tried to update the computer with the automatic updates of Windows and the Service Pack 1 could not install many times.  So, I installed the system update readiness tool.  Then I tried to install the SP again and it worked (I was also able to install SP2 and other updates at this point).  But, these downloads and installations took longer than they should have and my computer continues to lag when I'm trying to do something.  Norton AntiVirus found no problem.  I've only used about 20 percent of the memory.  System Idle Process is using high CPU, even when I try to use other programs such as IE and Google Chrome.  The computer fans work diligently as if the computer tries to run, but everything is going so slow that the computer is almost useless.

  The computer is almost three years old, but did not have something else installed Norton because I bought the new computer.  It has been used daily for almost three years without problem.  I do a lot but check Windows Live Mail, and then type the documents in Word format - literally that's all; no other programs, games, etc.  However, I have an error code a few months back: 'Not authentic Windows, Build 7600.'  In response to the error, I got my product key and verified the program and to use new Windows 7.
  Anyone know why the system idle process continues to consume so much CPU even when I try to open a web browser?  Even when the computer is inactive, the fans are running full speed and the computer becomes warm to the touch.  It seems that no matter what the computer is doing, it is lagging behind and struggling.  Even if I just want to open the start menu, it takes a few seconds for the computer to respond.
  Thank you!

  It is not dust but the crapware that you must get rid.  The first suspect is Norton, which is a terrible software that slows down terribly computers.  Get rid of Norton and install Comodo Internet Security instead.  Make sure that when you get rid of the plague of Norton, you get the Norton Removal tool and run twice.  Also, make sure that manually enter you your folder program files and delete all Norton and Symantec files and use a program like Malwarebytes file Assassin to get rid of the persistent process who do not want to delete.

  Then use CCleaner (and ONLY CCleaner - do not download or install any other system cleaners or registry mechanic) for cleaning your system and use Revo Uninstaller to remove any extra crapware that is installed on your machine.  Be sure to remove any software from Apple and get rid of all Windows Live software.

  Finally, you'll want to disable several Windows processes that eat up RAM unnecessarily.  These include Sync Windows, Windows Defender and Windows Action Center.

  Follow all the advice and you should find that your computer is running a lot faster.

• photos in windows 7 are slow to become populated, can you help me

  photos in my windows 7 are slow to become populated ar appear not all al.  I explore 9. changing size does not help

  Hi William,.

  1. Exactly how you try to view pictures? It is through a Web site or it is saved locally on your computer?
  2. Are you facing problems of visualization of photos online? If Yes, is it limited to a Web site?
  3. What web browser specific problem?

  If you are facing problems with images online, then try the instructions below:

  Sometimes a Web site you visit doesn't look like you expect it. Images may not appear, menus may be out of place, and text boxes may be blurred together. This can be caused by a compatibility issue between Windows Internet Explorer and the site that you are. When a site is not compatible with Internet Explorer, you'll see the compatibility view button in the address bar.

  Use compatibility mode in Internet Explorer ExplorerInternet 9

  Please post back with the State of the question.

• Windows 8 running slow as hell!

  I'm really tired of Windows 8, I bought a new PC to work about 6 months with the following specifications:

  Processor: AMD E1 - 2500 APU with 1.40 Ghz Radeon HD graphics card
  RAM: 6.00 GB
  HARD drive: 1 TB
  Running: Windows 8.1 (x 64)

  I've used only 44 Gb of HARD disk space and have only 7 installed programs, they are as follows:

  AutoCAD 2014
  Canon printer utility
  CCleaner
  Dropbox
  Google Chrome
  Vuze
  ESET Smart Security

  
  Now run Google Chrome slows down my PC to a stand still sometimes and makes AutoCAD running. I know that this program uses a lot of memory, but this is why I made sure I got enough RAM to cover. I even cut down on most of the Visual styles in order to speed things up. I have no virus and everything is clean and it is still slow.

  Now, I also have a Macbook Air with lower form of RAM and HARD disk space and it works like a dream, why can't Microsoft provides this level of simplicity and service? is - that so much to ask?
  I don't use all the 'apps' or something like that while can't be slow me down. Any help to speed up my performance would be greatly appreciated.
   

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

• I thought indesign cs6 was included in my package of premium design cs6.  Why, when I try to open it, go to a window that says that I don't have a CC membership more and then quits without loading Indesign cs6.  It requires a serial number, but the s

  I thought indesign cs6 was included in my package of premium design cs6.  Why, when I try to open it, go to a window that says that I don't have a CC membership more and then quits without loading Indesign cs6.  It requires a serial number, but for my design premium cs6 serial number is not accepted by it.

  Hello

  Yes, you need to uninstall Adobe Creative cloud only, if you are unable to uninstall creative cloud through the tool cleaner and error message you shared above.

  Please go through the below mentioned location and remove the file name ""ffc " "

  
  

  MAC: \User\\Library\Application Support\Adobe\OOBE\

  Windows: C:\ProgramData\Adobe\OOBE\ (to view the AppData folder and program hidden data, see files, folders, file name extensions |) Windows XP, Vista, Windows 7)

  
  

  
  * After the removal of FFC file run the cleanup tool and uninstall Adobe creative only cloud.

  Let us know if this will help!

  Kind regards

  
  Sandrine

  
  

• Why is-Premiere Pro CS5 slower on my system than Premiere Pro CS 4?

  I just upgraded Production Premium CS4 Production Premium CS5.  Have Windows 7, 64 bit OS, 9 GB ram,

  Processors Intel quad I-7 (over clocked to 2.90 ghz) 2.67 with hyperthreading.  I have nothing of any real substance

  running on my system in addition to Adobe.  I've just loaded in a ton of DVC PRO HD 60 images and am editing 30 minutes

  program.  Once I am in Adobe first Pro CS 5, it works quite well, everything works well in real time.  However, the time

  I click away from Premiere Pro as on my desktop, then try to click back in the Premier Pro, my screen goes white, Premiere Pro says

  "do not answer" in the title bar and everything freezes for a solid minute.  4 CS do not at all.  Anyone know what is happening?

  Eddiem TKS.

  The goal is to help and solve problems for all parties involved so that we can all be more productive.

  I never said or implied at all this:

  To say there is no problem with CS 5 software is just ignorant happiness and to be honest, deteriorate distorted.

  So... I'll put this another way for you then.  I will not have any issues that you and Sacha face with P2 files in particular.

  They review they rank, export etc...

  I have an ongoing project that has 54 GB of mxf source files.  Not a question that sounds like something that you mentioned above.

  It's a lot of files or a large project... I don't know compared to your projects... but combined with mixed graphic files more seq TIFF and tgas, wavs more notice of AEFX... it certainly adds to the top in my system.

  My material is not super computer. This is not even a system RAIDed.

  Must report... I go really far, or, to and from something else that applications of the Adobe Suite in my Suite CS5 but often many of them are open at the same time.

  I had a system glitch that caused 'go a little sleepy' apps, when left UN attended.  It was an advanced power management framework. (some what hidden)

  I also have a NAS, but this isn't for editing where to.  IT has Media Junction in my configuration between suites for the file archive and transfer only.

  Re: Why is-Premiere Pro CS5 slower on my system than Premiere Pro CS 4?

  My experience is that I said previously.  CS5 is much faster than CS4.  I suspect that many others have a similar experience to mine.

  So the question you guys are seen as being a little more unique to yourself.

  Good luck

• Why my Apple TV so slow is download from iTunes when other sites such as HBOGo or Netflix or showtime begin playing immediately.  Apple needs to fix this!

  Why my Apple TV so slow is download from iTunes when other sites such as HBOGo or Netflix or showtime begin playing immediately.  Apple needs to fix this!

  These services adapt to the connection that iTunes is set the highest rate and quality it will load a front part of reading people.

  You need the problems

  What is your current connection via speedtest

  Make sure that DNS is set to automatic (network - general - settings)

  If during testing of wifi Ethernet

  Test on another network