Why my computer running so slow and why online games lag and freeze.
Why my computer run so slow and why do games lag and freeze so often-
Windows Vista 64-bit on the HP Pavilion DV2 laptop IE9
Product NX926UA #ABA number
Start the HP Support Assistant software. Click troubleshooting, and then select each of the options available, except the performance. Delete all Temp files and temporary internet browser files will help you.
Follow the instructions on this tutorial at home to define your default virtual memory paging size. It's certainly worth a performance improvement you will notice. Don't let not Windows controls the size of your virtual memory paging file.
Fill your online games can be for various reasons. The most likely reason if you use wireless 802. 11 b or G is the connection. If you have a 802.11n wireless router and the wireless in your laptop card is capable of 802.11n bandwidth and then use it without a doubt.
Tags: Notebooks
Similar Questions
-
My windows 8.1 is running very slow and freezes from time to time.
My windows 8.1 is running very slow and freezes from time to time. So I ran sfc/scannow. It finds corrupted files, but could not correct. So I ran "dism / online/cleanup-image /restorehealth ' but there as well. Please help as soon as possible. Thank you!!!
Original title: find files corrupt after sfc/scannow and could not repair
Hello Akash,
Thanks for the reply.
As you said, after completing the scan found SFC, you get an error message indicating that there is corruption but was not repaired. Then, please follow the following suggestions to solve the problem.
Use the System File Checker tool to repair missing or corrupted system files
(Refer to: manually replace the corrupted file with a good copy of the file)
http://support.Microsoft.com/kb/929833/en-us
I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.
-
Original title: computer always slow and freezing after clean install
It is a compaq 2007 desktop running windows vista premium, I work on it for a friend, they said he was running slow and freezing up all the time so I just went ahead and did a system restore complete with built-in recovery partition on the hard drive, the recovery went well but still have the same problems with the computer being slow and freezing up. any help would be appreciated thanks.
Hello
Step 1: I suggest you try the steps in the Sub articles to solve the problem of vista performance.
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
http://Windows.Microsoft.com/en-us/Windows-Vista/get-computer-speed-and-performance-information
http://Windows.Microsoft.com/en-us/Windows-Vista/get-maximum-performance-from-Windows-Vista-from-Windows-Vista-inside-outStep 2: You can also check if the problem persists in the clean boot state.
Put your boot system helps determine if third-party applications or startup items are causing the problem.Try the steps in step 1 in the article to put your computer in clean boot mode.
http://support.Microsoft.com/kb/929135Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
iPad 2 running very slow and freezing
My iPad2 worked very slow and freezing. It is quite frustrating and I hope someone has a tip or a solution for my problem. I've updated my ios and right now I'm in ios 9.3
Try resetting your device. This will not erase your data stored on that device.
- Press and hold the sleep/wake button
- Press and hold the Home button
- Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.
Alternatively, you can go to settings - general - reset - Reset all settings
If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.
Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.
-
I have a Pavilion Dv6-1245dx, and today it started running more slowly and be all stuttery and jerky - ex: Watch Netflix, the sound works fine but the picture freezes. Run games on Facebook, but on such a delay, they are impossible to play. I'm running on Windows Vista (I think, regardless of that before 7). I'm COMPLETELY out of my element here. Any help would be appreciated.
Hello
Judgment of the laptop. Tap away at f10, you start to get into the Bios Menu. Under Advanced Options or diagnosis tab, you will find the possibility to run tests on the hard drive and memory. Run the two tests and post back with any error meesages.
If the criteria above, try the following.
In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator". In at the prompt, type the following command and press ENTER.
sfc/scannow (Note that there is a space between sfc and /)
Let the entire process, then the output type and press ENTER.
Then, click on the Start Menu, click computer, left click Local disk C once to highlight, right-click Local disk C and select Properties. Click the Tools tab and then click on the button "check the drive for errors. In the next window make sure that both boxes are checked, then click Start. Part of this process will require a reboot to check the disk.
Kind regards
DP - K
-
After recovering the Satellite L300 is slower and freezes
Hello
I just restored my 1DN back to factory settings L300 - but now I find that my computer is very slow and freezes for 1 second about every seconds frew. Certainly, it does not perform as it did before you restore the factory settings. For example videos etc. freeze every few seconds and do not play smoothly as they did.
No idea why this is and if she has nothing to do with the restoration of factory settings? And how can I solve this problem?
Thank you
Hello
After the laptop recovery procedure is certainly not up-to-date and I imagine that many Microsoft updates will be downloaded and installed. If you use the factory settings it is on automatic and several hours or maybe two updates will be downloaded and installed.
While the installation of updates that I can imagine that the notebook is quite slow and you'll be noticed freezing or stopped video playback.
Before you start using your laptop, install all updates and optimize the operating system preinstalled. Typical result of the new installation of the OS's slow start.
Please check this thread. You can find a useful tip how make your computer faster.Good bye
-
My real problem is to know how to clean the programs that are run at startup to the top. In addition, any other suggestions on how to improve the speed of my computer.
Manage your startup:
Open your Start menu-> click on run-> in the command screen type "msconfig.exe"-> in the "system configuration utility", click on a 'service' or 'Startup' tab-> uncheck all the programs you are no longer help.
The fragmentation
- Right-click the C drive.
- Click on properties.
- Click on the Tools tab.
- Click "defragment now".
- Click on defragment.
You can search what process you use cpu and the end of the process.
Under steps:
1. right click on the taskbar.
2. click on the Task Manager.
3. click on the processes tab.
4. double-click on the CPU.
5 is if "system idle process" is max.
6. If it is not a right click and click on end process.
Learn "why is my computer running so slow?" and "how to speed it UP:
http://downloadlk.com/WhyIsMyComputerSlow.htm
Use the tool: http://downloadlk.com/themosteffectiveregistrycleaner.htm
-
My computer is running really slow and guard same gel if I double click, it will do. I have windows 7 for home.
Hello
References to Vista also apply to Windows 7.
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista or
Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
installed the new windows Friday and since my computer is very slow and not connecting to the internet correctly... anyone else having these issues?
System Restore to go back before the show.
I suggest you to install the updates one by one and reboot the computer after installing each update to verify that update is causing the problem.
Also note the updates that you install on the computer.
Once you come to know what update is causing the problem, let us know.
Do not install any driver updates offered by Windows Update. Find them in the manufacturer's website instead.
Try a convenience store
Windows includes two programs of troubleshooting that you can use to automatically fix some common problems with performance on your computer or to the maintenance of your system.
Open the Performance troubleshooting utility by clicking the Start button, then Control Panel.
In the search box, type Troubleshooting, and then click Troubleshooting.
Under system and security, click check for performance issues.
Open the of System Maintenance Troubleshooter by clicking the Start button, then Control Panel.
In the search box, type Troubleshooting, and then click Troubleshooting.
Under system and security, click run maintenance tasks.
08/14 / 1115:46: 45 pm UTC
-
Games led by 7 Microsoft running very slow and draggy
I still have a problem to play all the games on my new computer, which is managed by Windows 7. The game runs very slow and response of the mouse and other controls are slow and draggy. Please notify.
What video card you are using as well as the model and brand of PC?
Have you updated all readers more recent? If this is not the case consult your OEM and download all the latest drivers for Win 7
MCP. MCDST. LVL 80
-
my computer runs very slow, what can I do?
my computer runs very slow, what can I do?
* original title - performance and security in Internet Explorer *.
Hello
Use the startup clean and other methods to try to determine the cause of and eliminate
the questions.---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps and happy holidays!
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
my computer is very slow and really not that old now it tells me that I'm missing borlndmm.dat program and need to reinstall and I don't know how
Original title: borlndmm.dat
Hello, Cyrille,.
This could be caused due to viruses or malware on the computer.
Follow the following troubleshooting methods:
Method 1:
Download Microsoft Safety Scanner, scan your computer for viruses and malware and then check its operation.
You can download Microsoft Safety Scanner from the link "scan to Microsoft Security.
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.
Method 2:
Run System File Check to fix the corrupted system files and then check how it works.
See the link "How to use the file system tool Checker to troubleshoot system missing or damaged files on Windows Vista or Windows 7" to run the System File Check.
Note: It can ask the Windows DVD difficulty and allowing SFC to do more than minor repairs. Could some of the files saved on your computer are deleted when fixing corrupted files.
I hope this helps you solve the problem. If the problem persists or if you have other problems with Windows, please post in the Microsoft Community. We would be happy to help you.
-
Computer running much slower after a Windows Update.
Windows Update problem
This morning, I shut down my computer and installed the updates at the same time. When I switched back on it, he says that he has set up updates. He got 15% and then closes, rebooted and configured updates as usual. However, my computer runs much slower than usual. Any idea on how I can fix this? Thank you very much.Check your hard drive for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
also:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any breach of integrity
Restart your system
-
My computer is very slow and takes a long time to connect and disconnect
Original title: sign out of questions
My computer is very slow and takes a long time to connect and disconnect. Sometimes I hit Logoff button and do not forget I have more work to do... is it possible to cancel the newspaper once it starts, or should I just wait what he log out completely and then reconnect? (It takes just forever)
-
El Capitan slow and freezes.
Hello
Since Friday, June 3 of this year my iMac has been regularly making slower with the spinning beachball showing when I open an application and when playing iTunes, YouTube, Vimeo, VLC etc the system just freezes then starts again normally. I ran Intego Internet Security, run CleanMy Mac but also run the same Washing Machine, Intgeo reinstalled El Capitan, but its still slow and freezes. Also, the activity running monitor did not throw all the problems.
No software has been downloaded or installed until this happened, just from appeared Friday and has gradually deteriorated since. I bought the iMac in 2012 and its been a joy full every day since then. Even that by typing the text in the screen freezes then the rest of the sentence make it up a few seconds later. Also scroll, left and right mouse click can take up to 25 seconds to work, even if the mouse works no problem, if that's any help.
My system is:
iMac 27 inches (mid 2011)
3.1 Ghz Inel Core i5
16 GB at 1333 Mhz RAM
1 TB HHD
OS X Version of El Capitan 10.11.5
Any assistance here for me would be really appreciated.
First of all, get rid of all the software Intego and CleanMyMac. They are not necessary and can only add to the problem of slow system and applications. Do a Google search to find the developer instructions to uninstall.
Also download and run Etrecheck. Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple's Support personnel) of the CSA to provide a snapshot of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.
Maybe you are looking for
-
I have two versions of firefox at the same time?
Hello Probably a stupid question but I have two versions of Firefox on my system at the same time? The reason is add-ons that are not compatible with v4. I wish I could close v4 when I need to use an Add On v3. Thank you.
-
Dynadock problems - new software install
Hello I followed the Forum thread "Dynadock does not work with Vista" as my new Satellite Pro could not work with my new Dynadock (new version). I d/l the new http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp softwar
-
Is EXFAT the best option for me
Hi, I bought a new WD 2 TB HDD to use to copy my edited video files on FCP and many other forms of data from my Mac on this disc. I want to use with Time Machine at the same time. I also want to be able to use it with Windows to read & write on both
-
Updated Windows Update not installed error codes
updates not enstalled, click try again, but got blah same results
-
Pavilion PC500 - 467C: flag do not print via a USB port to LaserJet 4
Pavilion does not print using the printer LaserJet 4 USB interface cable. LJ 4 load drivers for USB local port. Win 7 does not have the USB printer. Thank you