Why Keynote warn the font GillSans light and "BOLD" missing?

Similar Questions

• Why hp disables the use of scanning and faxing because of the low level of ink on my photosmart c4385?

  Why hp disables the use of scanning and faxing because of the low level of ink? Printer says print cartridge missing or not detected. Doesn't make sense to me because the ink has absolutely nothing to do with the other functions. Since I bought this all in one I replace ink twice and I only printed about 10 pieces of paper for nine, making these extremely expensive 10 sheets!

  try reseating the cartridges once more & switch off the printer and remove power & other cables connected to the printer & press & hold the power for 20 seconds & then reconnect all cables back & then turn on the pritner & try to use that will solve the problem...

• How can I recover my windows vista serial, the tile is broken and im missing a few numbers... __i lost my toshiba recovery CD, it is an a135/s4677, I reinstalled vista, but in the first instance. I am already taking pictures of the sticker and serial No.

  How can I recover my windows vista serial, the tile is broken and im missing some numbers...
  I lost my toshiba recovery CD, it is an a135/s4677, I reinstalled vista, but in the first instance. I am already taking pictures of the sticker and serial No. my laptop if you need if you can help me please write me * address email is removed from the privacy * thank you

  If you had not reinstalled Vista, we helped you recover the product key of Vista for running old, Vista activated using specific programs.

  But, as you have wiped the hard and reinstall Vista, we will not help you recover the product key.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  Using recovery disks is normally not need to insert a product key.

  See you soon. Mick Murphy - Microsoft partner

• Why the fonts so light?

  Using the default font, type in Firefox seems so light. Even when I replace the font with each other, the police seem broken up, is not solid. Ideas to make the fonts as clear as IE?

  You can enable ClearType system wide for all programs other programs as Firefox to use it.

  XP: Control Panel > display > appearance > Effects: "use the following method to smooth edges of screen fonts".

  See http://support.microsoft.com/kb/306527 - HOW TO: use ClearType to enhance screen fonts in Windows XP

• My printer shows the photo capture light and warning lights up but the buttons respond at all

  When I turn it on the caution light and capture photo light are turn on but the buttons respond at all.  It's a .elp of Brother DCP - 135 c.!

  Hello

  Check with the support of brother, their documentation online and drivers. OEM brother is responsible
  for the proper functioning of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Brother - DCP-135<-- uk="">
  http://welcome.solutions.brother.com/BSC/public/EU/GB/en/model_top/colormfc/dcp135c_eu_as.html?reg=EU&c=GB&lang=en&prod=dcp135c_eu_as

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• updated 7.3 to 10.0.1 on iPhone iOS 5 in the messages, I can't put the phone in a horizontal position in order to enlarge the keyboard more. a field opens with the font script styles and I can't get off my screen, to get at the larger keyboard.

  I just upgraded my iPhone iOS 5 7.3 iOS 10.0, now when I use my e-mail, I can place my phone horizontally to get the larger keyboard is no longer and use my thumbs (many more fast typing). Now, I get a "field" with scripted, for styles to close since fonts. There is an icon of a 'keyboard' if I type nothing happens. Clues? your help will be greatly appreciated.

  Bill

  Pressing this icon small keyboard should work (done on my iPhone 7). Until someone answers with more information, another thing you could try is to open the keyboard when the phone is vertical and then put it too horizontal.

• The disk of light and SDS Cache activity

  I have a relatively new W530 with the installed at the factory 16GB drive HARD drive cache and the ExpressCache software (working properly according to the Lenovo-recommended test). I want to know if the drive activity light shows HD activity only or also SDS hides.

  My observation is that for a long time the drive activity light is on permanently. The first time that this has happened, the warranty support told me that the HD failed and sent me a new. (They don't seem to know anything on the internal tables of health HD I thought existed and could be interrogated with a special software). Anyway, this seemed to solve the problem for a few months, but it is recurring lately.

  Looking again at the Task Manager/Performance tab/Resource Monitor tab / Disk, I can see that the larger disk of the user's ExpressCache service (as it was the first time). I stopped this service and set it to manual, and the constant activity stopped shortly after. He has not re-emerged in the last hour or two. Although the light is off now (for the most part), I still don't really know what that means; the first question remains...

  No matter what light you can pour on the light function (no pun intended) disk activity would be appreciated! -JCW2

  
  

• change the font by default and default font size

  As far as I can make out it is not possible to reset the default font or the font size in LC Designer ARE 8.2... or is it, and if so, how?

  I found this page re LC ES3, but it does not apply to earlier versions.

  TIA

  You can also create your own libraries of objects for custom objects.

  Get your fields/items they looking as you wish: fonts, borders, etc. And then do a group on the object library to put in, then drag the objects in that group.

• Help! distortion of red and blue in the areas of light and shadow of my photos? Only develop tab...

  I am changing a stream of photos from yesterday and everything was going good edition yesterday and this morning, but now this afternoon, this blue distortion appeared in the Red distortion shadow areas into zones and clear. If I export the photo, it disappears, but it's very distracting, even if I'm in the tab to develop suggestions?

  Hi congillespie,

  The red and blue puts in light that you see are the clipping, you can turn it off by pressing the 'J '.

  Kind regards

  Tanuj

• If I type a URL in an e-mail message, why don't the recipient click it and go directly to the site in question?

  It works very well in Internet Explorer and Google Chrome, but Firefox, to cut and paste the link into their browser...

  Just above the text box that allows you to enter the text of the message, there usually a bar of buttons with buttons to add updated text in shape like the bold and italic.
  
  This toolbar can also have a button to activate a clickable hyperlink text link (look for a string like button).
  
  You can select the text and click on this button to activate the link into a clickable hyperlink.
  
  If you can not find the button, and then move all the to check the ToolTip of each.

  • Link - https://addons.mozilla.org/firefox/addon/142

• When I go to the defender of window he says it's off. Box comes up press to put on the ___message error lights and error ox800705b4 comes out and it freezes and I have to wait until its expiration time says. __

  You have problems with start programs windows Defender
  OX800705b4 error messages
  Recent changes made to your computer just installed the new system
  What you have already tried to fix the problem mbut he fails to change things to saysany Mu status

  You have a suite of security such as MSE, Norton, McAfee, etc., installed? They have integrated programs which do the same work as Windows Defender and close it to avoid a conflict. This is normal and the way it should be. Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

  Can I uninstall windows defender? My MSE says protected.  Thank you Charles Dalton.

  GA.

  NO.

  You cannot uninstall windows defender in vista

  It is part of the vista operating system

  BUT you can turn it off

  read the below methods to disable windows defender in vista

  read the information on the link on how to disable the windows defender service in vista below

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

  Walter, the time zone traveller

• How can I get the relief of lights and shadows of otherwise transparent type?

  I want to type in a form that cleared the underlying image side highlight of embossing and dark on the side of the shadow, but leaves the body of the transparent type embossed. How would I do that? I apply a certain amount of transparency of a layer of text, then the type is not totally obcure the underlying image.

  I usually apply a fairly transparent version of a copyright image in Lightroom, to keep discreet but always readable, if you really look for it. See the bottom left of the pictures to https://www.facebook.com/drew.tronvig/media_set?set=a.10151421311963431.507404.596468430 & t ype = 3. I created this image of copyright in GIMP or something, but I need to generate even more, and I really want to stay in Photoshop.

  Use the Layer Styles and set the fill of the layer (in the layers panel) to 0.

  -Christmas

• Why not include the tag Module syntax and parameters on the Page Tag Ko?

  Colombia-British team @.

  Tags - fast in the KB reference Page http://KB.worldsecuresystems.com/134/bc_1342.html seems to be the place that is authoritative for the tags. What is lacking is the Module about the syntax and available parameters (current version).

  Currently, we are obliged to try to assemble this information ourselves from multiple resources and this leads to obsolete or incomplete information, confusion and loss of productivity of your customers.

  I would like to see this added info and links back to each module page KB from here. Developers having to create their own documentation solutions to fill the gaps in the BC docs takes away from the time of construction sites and increase the sales. Instead of promoting other "partners" who build the subscription models filling your poor docs, you should invest in the documentation of quality for us all.

  What prevent you from adding this information to this already popular resource page? Is there a better solution?

  http://helpx.Adobe.com/business-catalyst/KB/modules-quick-reference.html

  The two joined the forums on the right landing page.

• my screen is wide, as I CAN, T SEE ITEMS ON the extreme right, cant get to arrows, the fonts are 16 and 13

  my screen is 17 wide screen far left ok but far-right is not, as it should be a little smaller on the right, can, t get to arrows w on the right, when I use internet explor its ok

  Extension of Babylon 1.1.8 installed toolbar? A recent update of this extension were reported because of this type of problem. If you have one, turn it off.

• LR CC constantly crashes the ball spinning lights, and must force them to leave. Do you have a solution?

  I have this problem since I'm subscribed to Lightroom CC. My 5 version worked very well. While searching on Google, I noticed many people seem to have the same problem.

  You don't give any indication of your OS (I'm guessing that Mac). Have you tried running with the GPU disabled?