Why LabVIEW does not detect NI FlexRIO PXI-7954 as target?

Similar Questions

• LabVIEW does not detect not COM port

  Hello

  I need to read the data of the PSoC using rs - 232 and post on labview. I created VISA and the control of resource name is created. But it does not detect the COM ports in the system. The only thing I get is refresh.

  I tried to pump data and verified by hyperterminal and it works well.

  Please help me in this regard.

  Thanks in advance.

  Noel

  Save even more-

  Cypress PSoCs interfaces via USB... (or I2C... but who would be ridiculus)

  Have you installed the driver Port Com Vitrual?  The Windows Device Manager sees the port?

• Why labview does not control +'. ' ?

  I see the question of the mode of development both in application mode.

  the program responds to 'Leave running' button, but not Ctrl + shortcut period.

  I checked in the Menu Editor-> operation-> Stop the shortcut is displayed and I na not configure and graphic execution environment.

  What can be the problem?

  good guess :-). After investigating a little further, I see that the ctrl +'. ' works in 'normal' screw, but as my vi contains automatic mouse clicks it seems that it moves on the development of the VI for this purpose it will not respond to the keyboard interupptions.

  I entirely agree that the right approach is to stop functioning correctly and not to break the race in the Middle without option to know exactly where State is stop and perform some steps of the post process. However, as currently, the code is written in a way which makes it, she will have to wait until someone has the time to restructure.

  Thank you!

• Why HP does not detect my HP photosmart c3150 device under windows XP?

  I plug my HP photsmart C3150 all-one-printer and followed the steps on CD, check the updates and checked the material. My printer is on, and yet, when I click on my HP desktop icon I get an error message that says: No. HP devices detected. HP Solution Center will close now.

  Hello

  You try to connect wireless or wired?

  If wireless don't you computer has wireless capabilities and wireless turned on?

  What happens when you cross the add a Printer Wizard in the window of faxes and Prtiner, please make sure that you added the printer first successuflly

  You can also try to run a USB cable directly from the printer to your computer and set up the initial connection, and then you can go wireless

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02283843&LC=en&DLC=en&cc=us&product=1146336

• I have new iphone but my computer does not detect this why?

  I have new iphone but my computer does not detect this why?

  iPhone 5 requires iTunes 10.7. You have upgraded to this version?

  https://discussions.Apple.com/article/TS1538

  http://support.Apple.com/kb/DL1576

• Why my Hp netbook does not detect the internal speakers?

  My Hp Mini 5103 does not detect its internal loudspeakers. I have never dropped or done damage to him but he wil not even recognize that there are fixed speakers.

  Check Device Manager to see if you have a driver problem.  Click Start and right-click computer.  Click Properties-> Device Manager.  Look where it says "audio, video and game controllers.  If there is! or? next to the entries, you need to download the driver on the HP website.  If this isn't the case, right click on the entries there and click Properties to see if the device has somehow got disabled.

  Good luck.

• My iTunes does not detect my iPad.  I use Windows 10, Norton 360 and the latest version of iTunes.  All software are up to date, and each says it works correctly.

  My iTunes does not detect my iPad.  I use Windows 10, Norton 360 and the latest version of iTunes.  All software are up to date, and each says it works correctly.

  Turn off or get rid of Norton.   I really don't see why you need it.

• Satellite A500-19W does not detect battery

  Hello

  I have a portable Satellite A500-19W which is 6 months old.

  I bought this laptop while I was in Egypt and now I've moved (Dubai) UNITED Arab Emirates.

  Lately my laptop started suddenly does not detect battery.

  To remedy this that I have to remove the battery and clean the terminals then re - put the battery and turn it on and it's OK.

  This happened twice this week and caused my data loss because the charger is disconnected (if the charger is connected, the laptop computer continue to work, but the battery indicator does not light up)

  Now, my questions are the following
  1 - is this problem under warranty?
  2 - should I pay for anything when getting this laptop in service in Dubai noting that I bought in Egypt?
  3. is there a cure for this problem without going through the service center?

  Thank you

  1 / Yes. These questions should be covered by the warranty. Material is junk.

  2 / the nearest service contact and ask, but I'm sure you don't have to pay for the repair. The two countries are countries in EMEA, and avoid any kind of problems.

  3 / it is not much, you can do about it so please contact and explain the situation. They should check your laptop and find a reason why this happens.

  Don t waste your time and contact the closest service. If you have need for addresses and phone numbers you can find on http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

• w540 does not detect DVD drive

  W540 does not detect the CD / DVD drive and because it takes a long time to start.

  I know that I can put the hard drive to boot first, but now I want to install windows 7 and it does not start.
  I have already installed the latest version of the BIOS but does not solve everything.

  I wonder what's happening?

  Thank for the help that you can give me.

  I discovered why the player start out with reinstalling windows DVD.
  According to the manual, so that the operating system Windows 8 and Windows 8.1 work, Secure Boot function must be activated. Similarly, restarting the OS Optimized Defaults menu must be activated and when this setting is changed, some BIOS settings are changed automatically including the UEFI / Legacy Boot happening to UEFI. We need to change the UEFI / Legacy Boot for both, only then can start the DVD from the drive.

  I thank ColonelONeill for your help.

• Reading TCP does not detect the network closed conncetion error (66)

  Hi dear all,

  Instead of LAN I use WIFI to connect PC and mobile. Read all communications and write operations are performing ok. But the only problem I am facing is that once I disconnect the network from a mobile phone connection my labview TCP read operation does not detect it and only timesout at the specified interval. Although for Bluetooth connection network if I disconnect mobile then BT read detects it as network conncetion closed in error by peer (66).

  Can someone help me on this.

  Thank you & best regards

  Zdzislaw qureshi

  Hi Zdzislaw,

  The behavior you're seeing is expected for TCP as the device will timeout while it is looking for the connection close the connection.  This Wikipedia article explains how TCP protocol works in relation to a handshaking procedure four lanes running in order to close a TCP connection.  I hope this helps!

  Kim

• HF R600. For some reason, my computer does not detect it.

  So, I don't know why, but my computer, windows 8 (I know..) does not detect my camera, the HF R600. It does not appear in the list of connected devices, the transfer utility said that it is not connected, I'm not sure what to do. Also, I felt that I could ask now as well. IM planning to use with LiteCam game software with the camera providing the embedded video, you get to know if a compatible device for it?

  Try this, with connected usb camera, click the play button under the power button on the camera body?

• does not detect not USB flash drive? __

  USB flash drive does not detect not?

  Hi AwaisAmarQazi,

  ·        He recognized before?

  ·        Do you remember recent changes made to your computer before the show?

  1. check if the device is detected in Device Manager. Follow the steps to go to the Device Manager

  a. Click Start, type devmgmt.msc and press to enter.

  b. Locate the name of the device

  2. try the steps lying in the link below: why my computer doesn't detect my new USB device when I run Windows XP or Windows Server 2003? :http://support.microsoft.com/kb/314634

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Center does not detect my TV tuner card

  Hi a few years back, I built a Media center PC Windows Vista worked great! incredible experience recently (2 months ago) I formatted the PC and reinstalled Windows Vista now Media center options have changed and my Tuner card is not be detected BUT if I use the software the camer card it works fine I ca watching TV and recording with no problems

  I've uninstalled and reinstalled the drivers twice and today I removed the card and inserted into a PCI slot new nope still does not (sigh)

  PC is a core 2 duo with 2 GB ram Intel MOBO ATI 3600 seris of graphic card tuner Kworld is

  I'm suspect that Microsoft updated Media center to stop my card work! or is it because I'm at the Canada and rules are different here and that's why multimedia does not work?

  Hmmmmmm

  appericate any help or advice thanks in advance

  -Derrick

  It seems that the tuner is no longer supported by MS, but thanks for the answer Vijay

• Nintendo Wii does not detect new router WRT160N...

  I got this new N Ultra Range Plus router for Christmas and thought it would finally so my Wii to the internet, but to my surprise, even though it detects the router, it does not connect. I get the Wii error Code: 51330. I searched on google with this code, and he was told to change the channel 1 or 11, I did, and that has not worked. Or put the address allow mac in the column, which also did not work.

  I really need help. I don't know why it does not work. Internet works fine on my computer, but for some reason, it does not connect on the Wii. And the router is very close to the Wii as far as space goes.

  You can change/adjust the settings of your wireless router...

  Open an Internet Explorer browser page. In the address bar type - 192.168.1.1
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the tab - Wireless
  -Here, select manual configuratioon... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the standard channel at 11-2, 462 GHz...

  - And wireless SSID broadcast should be enabled, and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and not letters) and click on save settings...
  Please take note of the WEP Key 1 because it is the security key to try Wireless Network.Now if you could see the network without wire/SSID name and try to connect...

  Click Advanced Wireless-
  settings > change the tag to 75 interval > change the Fragmentation...
  Threshold to 2304 change the RTS threshold to 2307 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

• BIOS Inspiron 2305 does not detect the drive in ahci mode

  The hard drive in my Inspiron one 2305 crushed and I tried to install a 500 GB Seagate Barracuda drive.

  The Bios does not detect the drive. I noticed that the SATA in the BIOS mode option has been put on AHCI. I changed the ATA mode and the BIOS has detected the drive.

  However when I try to install a clean version of Windows 7 (Dell OEM disc), to halfway to the installation Setup will fail. I noticed that the reason why it will fail, is that the installation process now does not see the hard drive.

  Can someone tell me what steps to take to do the installation?

  theFlash1932 and natacuk4

  Although I was not able to swap the Sata cables as natacuk4 suggested; It looks like just unplug and reinstallation of cables Sata what it did the trick!

  I was able to boot the system several times and it seems that everything works fine.

  Thank you guys for helping me solve this problem!