does not detect not USB flash drive? __

Similar Questions

• Windows 7 does not detect not USB flash drive

  Hi, any help much appreciated on this. Windows 7 does not detect USB flash drives on my laptop. I know that readers of work on other computers and all the USB ports. He does not play sound when plugged in the first time and does not anywhere on my computer. Any ideas? Thanks in advance

  Assuming that you have several disks that work on other computers...

  If you have tried several USB drives on the same port

  AND

  This port does not recognize the USB device plugged in, while the port is not operational.

  IF

  All ports respond in the same way

  THEN

  You don't have either not installed the correct drivers

  OR they did not physically.

• laptop Envy 17 17-j034ca: can not detect the usb flash drives

  Hi, I recently installed windows 7 64 bit on my computer laptop envy 17 17-j034ca. Then, I managed to install all the drivers but it still doesn't detect usb flash drives and I tried to install from the web site of HP and my config but it still does not work

  Please help me

  

  It's ok my sound suddenly computer detects the flash drives normally

• HP Elitedesk 800 G2 SFF: external hard drive not detected in the BIOS. Only USB Flash drives are detected.

  Hi all

  I received recently 2 new HP desktop computers.

  HP Elitedesk 800 G2 SFF

  HP Elitedesk 800 G2 TWR

  The goal is to test our real W7 x 64 image on these machines and to inject the missing drivers in the image.

  MDT 2010 to create a deployment on a USB hard disk drive.

  This disc of deployment is already used on 16 different models of HP in the company (Elitebook, zBook, EliteDesk) to install our image so I know it works.

  Unfortunately, the two HP Elitedesk 800 G2, I can't start the boot disk but I cannot to USB for a USB key.

  The USB drive is not detected and not proposed in the BIOS Menu of STARTUP.

  Only the internal HD, external USB Flash Disk, DVD and network devices are detected.

  Here's what I already checked or tried:

  • Latest Version of the BIOS installed (2.05)
  • UEFI Boot has been disabled. (not supported by our record of deployment)
  • USB ports are enabled (front and rear).
  • All types of USB devices are allowed in the BIOS
  • The start command has been changed to start with USB devices.
  • Legacy support is active and Secure Boot disabled
  • Delete the keys to secure boot
  • Reset secure by default startup keys
  • This morning, I created a new disk deployment on a USB Flash drive and it works!

  So, it seems that only Flash USB drives are detected.

  I know it is possible to return the flag removalble on a USB device to cheat the system and make it appear as a disk fixed, but I want a simple solution.

  Does anyone know a fix or a workaround for this problem?

  Thanks in advance!

  For those interested in the answer, here's the final results.

  It turns out that the hard 500 GB external drive can be detected if it is fomatted in FAT32.

  It's strange because my 16 GB USB Flash drive formatted in NTFS works very well.

  In any case, I'll create a FAT32 Partition to the Boot MDT files and put my picture (because the file is too big for FAT32 partition) on the secondary partition (formatted as NTFS).

  Thanks to the technical pre-sales team of HP who helped me with this!

• I got Windows 7 and when I plug it does not recognize a sandisk to my pc USB flash drive

  I got Windows 7 and when I plug it it does not recognize a drive flash USB San-disk on my PC, all the other brands are. Can someone help me?.

  Hi Martin,.

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, that a USB SanDisk flash drive is not detected on the computer.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To resolve the problem with the connection of a USB flash drive, I need more information:

  1 have you tried plugging the machine into the other USB Ports?
  2. did you of recent changes on the computer before this problem?

  Method 1:
  I suggest you to connect the USB device to another computer and check if it gets detected. If this is not the case, this could be a problem with the USB device.

  Method 2:
  If the USB device is detected on another computer, you can run the hardware and devices Troubleshooter and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:
  I suggest you try the procedure described in the article and see if it helps.

  Install a USB device
  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Check the link for more information.

  Install, view, and manage your devices and printers
  http://Windows.Microsoft.com/en-us/Windows7/install-view-and-manage-your-devices-and-printers

  Let us know the status of the issue after you perform the troubleshooting steps. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• TouchSmart HP ENVY 15-j009wm: TouchSmart HP ENVY 15-j009wm does not read USB Flash Drive after Downgrade to Windows 7

  I've demoted installed Windows 7 with Flash Drive but I need help. Windows 7 doesn't read my Flash drive more? He can read my USB keyboard but does not read a USB Flash drive.

  I have no Internet on the computer, so that means I can not update my drivers. And I have a few drivers in my flash drive I want to install, but I can't.

  I read this: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-ENVY-TouchSmart-15-j040us/td...

  It not me any more because I can't access my USB drivers

  Hello:

  Looking at your other posts it seems that you have yourself painted in a corner.

  Since there is no inheritance or the setting USB auto in the BIOS, your only option would be to remove the hard drive, then put it in a USB drive enclosure sata hard laptop, plug in another PC so it can be read, download the drivers there, you need and copy to you user profile on the hard drive removed.

  Chapter 5 maintenance manual provides the procedures of withdrawal and replacement for the hard drive.

  http://h10032.www1.HP.com/CTG/manual/c03733656

  Reinstall the hard drive, run the drivers, and you should be good to go.

  These would be the drivers you need for your model...

  SM bus controller: install this first and reboot.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_127691_1

  USB3: Install these two and restart.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_139250_1&swEnvOid=4058

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_133037_1&swEnvOid=4058

• x 61 does not start from usb flash drive

  I don't know that I did several times before, but for some reason any my x 61 does not allow me to boot to a usb flash drive, I use normally to install the operating system.

  Any suggestions what might be wrong and what I could do about it?

  I should mention that USB is enabled in the BIOS and usb flash drive install works on other computers.

  Update seems to be an incompatibility with wintoflash, I used the Microsoft DVD/USB tool and it starts the flash player and finished the installation. Strangely the wintoflash installation worked fine in a HP dv3000.

  Consider this resolved.

  Wow I never saw your post until that earlier.

  Situation is resolved in the first post

• Windows does not recognize the USB flash drive

  Hello
  My USB does not work when I plug. It seems that Windows recognizes the device because it is found in the Solution Explorer window, but if I want to create a folder or a file on the USB key I have the following message:
  "Cannot find this article.
  It is no longer in < %3="" null :="" optext=""> . Check the location of the components and try again. " < br=""> also the files that are copied to the USB flash drive are not visible in Explorer and it looks like the drive is empty.

  I want to emphasize that the same (Kingston) USB flash drive works perfectly under Windows XP operating system on another computer so it may not be a problem with the device. The same problem also appears when you use a different USB (another manufacturer).

  Thank you!

  Hey, 101 a.

  , I just posted a fix I found for my USB flash/go to work again.  It was a very simple solution, too.

  I unplugged all USB devices first, then tried my USB jump drive again.  IT WORKED! I've narrowed the problem to the new printer that I use.  It's a Mono Dell Laser MFP 1125.  Whenever it is plugged into a USB port, my USB doesn't work.  All other devices work, but not the USB is the printer is connected

  I don't know what done to block the flash/USB key, but unplug printer allows the jump command to work again.  I will contact Dell on what did the printer driver to block the flash player.  Just an info on the fix I found.

• HP USB Flash Drive v155w not detected by my laptop

  Hello

  Help, please.

  I bought a HP USB Flash Drive (16GB) v155w but now it is not detected by my laptop. Dell XPS M140. It runs on OS WINDOWS XP (Media Center). can you suggest a way out.

  Thank you.

  Also, I have same problem and discovered that I inserted the USB key wrongly, just try to insert it by reversing the trend which solve the problem in my case.

• When I plug the USB FLASH drive into the PC it does not appear in the computer

  I have a USB Flash driver: Team Fusion more 4 GB

  Like this one:
  
  Same color and this one exactly.
  and when I put inside my computer I hear the BLOOP sound when I insert it and also when I go out, I hear a noise... but when I go to my computer it does not appear...
  It worked before, I inserted my USB Flash driver inside my computer... then when I right click on a file inside driver flash my computer got stuck and I force restarted my PC with exit it restarts normally and after that it doesn't work any more I just hear sounds when I insert the USB key inside and outside.
  I tried things.
  -Troubleshooting and it didn't help me at all... He didn't show me something when he finished it.
  -Tried restarting the computer and access bios and active in the advanced settings in the number 3 to USB - ZIP
  -J' inserted behind my computer and also in front of the computer USB flash driver.
  -Computer all analysed in depth scan with Advanced System Care Pro 5.4 and did not help even after a reboot.
  -Tried to reinstall the driver for the "Device Manager" USB flash drive
  -IMPORTANT! I tried to plug this USB on another computer and it arises there, but could not access the USB key, I tried to format and it says error and he said that he could not format... I tried to format it in NTFS, fat32, with formats fast and quick, but nothing has worked.
  SO the problem is with the USB FLASH DRIVE! not the computer...
  Help me please :| What should I do?
  Image when my USB driver is inside my computer:
  Open the image in a new tab to see full size image.
  Picture that shows that I reinstalled the driver for my USB Flash drive:
  

  Yes man, he is in disk management. I tried to do a right click on it and clicked on «letter of change of driver and paths...» "and it came up with error... Look man, I fixed that by myself... the flash disk is cool now xD you know what I did? I just went to my dad's pc... I tried to get the DRIVER USB FLASH, but he came up with the error and asked if I want to format it... I clicked format and it didn't work... I tried NTFS, FAT32, format not quick and fast and nothing worked... it was still * place... so what I did? I downloaded "HP USB Disk Storage Format Tool 2.2.3" of http://www.softpedia.com/get/System/Hard-Disk-Utils/HP-USB-Disk-Storage-Format-Tool.shtml here and then I formatted it with success! and then the flash driver disk worked on my dad's computer but when I tried to connect it to my pc, it does not appear lol but it worked on other computers, so it's cool: P I just going to format my PC: P it works now with the USB HP program disk formatting tool. only does not not on my pc, but it's ok... I formate my pc. :)

• USB flash drive receives an error "volume does not contain a recognized file system" in Windows 7

  I plugged my USB on a windows 7. He always invites me to analyze and correct or cancel. I cancelled each time, but I got bored with it popping up each time, so I said to investigate and fix.  A loading screen came so I waited patiently. After that it asks me to format my USB flash drive. I can't format it but because I have files from work to home and all my other personal files out there. So I cancelled the format, but every time that I plug it into my computer it asks t format. I even plugged in on a computer running windows XP and wanted to get in shape. When I try to run it without formatting as it is said, "E:\ is not accessible. The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted. "My question is... what we Windows 7 to my USB and how can I recover my data?

  This is common with USB drives used on different operating systems. It happens alwaysto me when I use my drive to work (which is managed since my MacBook Pro) on Vista and Windows 7 client computers. Like you, I learned the hard way you must cancel the digitization of Vista/Win7. The only thing to do at this stage is to connect the player to a computer that can read the files OR use the software of data recovery on it to get the files. I believe that Recuva can do it for free. Format the Flash DRIVE, then start again. Either way, you don't want to use a USB key as a single backup of important files because - as you have unfortunately discovered - stuff happens.

  http://www.Piriform.com/Recuva

  http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• Win 7 Backup and Restore does not recognize the USB flash drives.

  Win 7 Backup and Restore does not recognize the USB flash drives for a backup image or a recovery disc.  Given that Windows 7 Starter Edition is used in many, if not most of the netbooks and netbooks have no optical drive, support for flash (thumb) drives would be very handy, especially for repair and recovery.

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  You can't save backups to a flash drive, you need an external USB hard drive.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Dell DataSafe - 'Create System Recovery' does not recognize my USB flash drive

  Hello

  I just set up my new laptop Inspiron and 'Dell DataSafe Local Backup Basic Edition' pops up advising me to "Create system recovery media" restore my system to its critical failure of hard disk factory settings.

  It gives me the option to save this on a disk or a USB Flash drive.  I have a drive hard laptop "Western Digital My Passport Essential' that I would use for this, that's why I chose the option of USB Flash drive.  However, I get a message "no USB key not found.

  Can someone tell me what I need to do to store the backup recovery system on my laptop hard drive?  (I know a recordable DVD will be probably easier, but I did not and do not want to buy a bunch of them just for that!)

  Any notice received with gratitude.

  Thank you

  I think you may be stuck. It may be opposing on the hard drive because there are already data on this topic.

  You have a friend that can give/sell you a blank DVD?

  Ron

• USB flash drives do not work

  Hi all

  I have a couple of USB flash drives. I recently got a new computer and none of them work. They work on a computer with Vista and a Macintosh running leopard OSX. I tried to install the drivers for them, but they do not work. I tried to uninstall the from Device Manager, but they don't always work. Also, one of them appears SOMETIMES (very rarely) and when he does works incredibly slow and unresponsive so. I searched the internet for each method I can find, but nothing yet. And they work very well on other computers. Can I use bluetooth USB and a USB mouse and pregnant too much work, but the sticks of memory will not work. Also do they not appear on Device Manager. I have Service pack 3 2002 edition came with the computer.

  Hello Hasan516,

  Thank you for your message.  Have you tried formatting of thumb drives?  If you have data on them, you will need to copy these data to a computer first.
  If you can see the drive but not access it under XP:
  Open 'My computer' > click the drive and select "format...". »
  When the Format window opens, scroll down the "NTFS" file system, and select 'start '.
  Please let us know if this is or is not to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• USB flash drives not error 39 working -.

  Original title: USB flash drives doesn't work do not

  Hello
  My USB flash drives do not work in one of my USB slots. All other USB devices work correctly.
  Device Manager displays a yellow triangle with an exclamation mark next to the hard drive
  Have tried to update the drivers but points out the best drivers already installed.
  Connection drive after that a restart prompt message "driver installation", followed installation failed, error 39.
  I installed the latest drivers for the chipset of my Board.
  I have the Nations United-mounted and re-installed readers all affected.

  Grateful for the help, please.

  conx82

  Hello

  Have you tried the thumbdrive in another computer to be sure that it is still viable?

  ----------------------

  Try a restore of the system back to until the drive disappeared.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -----------------------------------------------------------

  If necessary:

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - anywhere in the area of white/white - point of VIEW, then-
  Show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances. (There may be none.)

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ----------------------------------------------

  This can be useful to determine if the wrong driver is loading.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">