Why Muse is extending out my screen even when enlarged?

Similar Questions

• Satellite M30: random characters came on the screen even when installing

  Hello

  I have problems with my Satellite M30. It shows random characters or signs on the image. Other than this computer works well. I thought it could be virus, because I can see the Toshiba and the fine Centrino Logo, it starts happening during Windows loading.

  So I reinstalled it but random characters came on the screen even when installing. If anyone can advise what this could be?

  My thoughts are either bad graphics card or a Ribbon of a cable LCD screen mobo.

  >... I can see the Toshiba and the fine Centrino Logo, it starts happening during Windows loading.
  > Then I reinstalled it but random characters came on the screen even when installing. Can someone advise what this could be? My thoughts are either bad graphics card or a Ribbon of a cable LCD screen mobo.

  For me it also looks like a GPU malfunction... what you is to connect the external monitor to the laptop. If the same strange signs, characters will be visible on the second screen while the GPU is defective...

  Well, it would be the worst case, because the whole motherboard must be replaced in case of malfunction of a GPU chip...

• Screen saver goes my screen even when I use it.

  Hi, I have an iMac (late 2015) and the screen to go to the screensaver, even when I use it. My screensaver is located at 10 minutes before you go to the screen saver mode. It happens as if the meter time don't know what I'm doing. It happens more frequently when I change from one application to another. Any ideas why it does this? Thank you.

  Is it possible that you have active corners enabled and you moved the cursor in the corner and trigger the screensaver?

• Keep the bar from the top hidden in full screen, even when said on

  When you are in full screen view and you press the cursor of the mouse to the top of the screen, you will see the top bar.

  Is there a way to do not do? (You will then need to press F11 to get out)

  Add code to the file userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #fullscr-toggler { display:none!important; }
  

  The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
  • Use a text editor like Notepad to create a userChrome.css (new) file in the folder chrome (file name is case sensitive)
  • Paste the code in the userChrome.css file in the Editor window
  • Make sure that the userChrome.css file starts with the default @namespace line
  • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userChrome.css.
    Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userChrome.css.txt file

• Why recurring status on orders always disabled, even when it is turned on?

  Our recurring orders are indicating the recurring as being disabled state. It has always been activated and continues to generate new bills as it should.

  Why is this? Is it a kind of intuitive behavior that I don't understand?

  Kind regards

  Le roy

  I found out that only the original of invoices will have recurring activated. To stop, you must find the original of the invoice.

• Why have I not two selectable organization even when the pack was created in Creative Packager Cloud?

  Hello

  I have a problem when the pack was created in Creative Cloud Packager, there are two selectable 'same' organisation.

  The first one named "Centre professional of the Littoral Neuchâtelois" offered license type ' named ' or 'license of device.

  The other named "Centre professional of the Littoral Neuchâtelois" (ditto) offered only a license type "named license.

  

  My question is why do I have two organization?

  Thank you very much.

  Pellaton Roman

  It seems that your ID is associated with two accounts.

  We have an approval attached and the other has a license of creative teams of cloud (username).

  If you want to check more details about these accounts please contact customer service

• Why Muse is not accepting my Adobe ID when I go to publish on Business Catalyst?

  When I got to publish on Business Catalyst, he asks that I have upgraded my Adobe ID and request my password, but it's not accept it. The following error message is attached.

  

  Hello

  This will be fixed by the catalyst of business support team, please use the guidelines below to reach out to support

  Guidelines of the Business Support of catalyst

• I want to print the data on the screen, even when the print command is not available

  When I active Meadia Player I'd like to be able to print a list of the songs in the library, Playlist, etc.

  Hi Whitepolarbear70,

  Thank you for visiting Microsoft Answers.

  I have some steps that may help you.

  Method 1

  Try to take a screenshot of the library. To do this, follow these steps:

  1 open Windows Media Player.

  2. open the library and click on the following combination of keys
  -Alt + PrtScreen/SysRq * (PrtScreen/SysRq is usually right next to the F12 key).

  4: open Paint or Microsoft Word, and then press the following key combination
  -Ctrl + V which will stick to the screenshot that you took
  3. adjust the size n PRINT

  Method 2

  You can try export playlist of media information by an application word by following the steps in the link below:

  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/HOWTO/mediainfoexp.aspx

  We inform you that you will install Media exporter info. This exporter is basically designed for Media Player 9 and would work for Media player 11.

  The process is a little different:

  Follow this workaround solution to install the exporter of media:

  Step 1 - Download and install Media exporter Info

  You can try to run the program in compatibility mode for Windows XP.

  Make older programs in this version of Windows

  http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspx

  Step 2 - use of the exporter to export of information media

  Open Windows Media Player.  A small Media exporter Info window must already be open.  If not, you can open it manually: on the Tools menu, go to plugins and choose the exporter of News Media.  If you do not see the Tools menu initially, just right click somewhere on the blue bar dark near the top of your window of WMP.

  Click Properties to select where the file is saved and what application to load it in.  Will the file be formatted differently depending on the application you choose, but Excel is the best option if you want to clean it to show only the artist/album names (see below).

  Click Export.   The file will be exported, but it will contain much more than just artist names and album information.

  See the link given below where the user had a similar problem.

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/adc55535-e1a5-42E7-9EA1-f93c6334b523

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why I get an out of memory error when opening a pdf file?

  I have large drawings that I print some are good, but have 2 I get an error "not enough memory"?  How to fix this?

  Hi Rick,

  His pdf due to large size that causes this problem. You can try to reduce the size of the pdf file (using Acrobat |) Optimization of PDF files ) & then try to print.

  Let me know if the problem persists.

  Kind regards

  Nicos

• To monitor screen black startup even when turned on.

  Hello, John Sherman,.

  Your question about the Microsoft community received a response from stephanie Podder.

  Title: to the start screen black screen even when turned on.
  Response

  Hi John,.

  It has long been that you have filed your application. Are you still experiencing this problem?

  If so, let us know we will be happy to help you!

  For stephanie Podder: yes I always face this problem. I need help.

  Read this answer on Microsoft Community

  Hi John,.

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because of driver settings or registry corrupt display.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important notes:
  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Portege R700 - releases of the battery even when power off

  Hi all

  I had a search on the forum but not found all the messages related to a question, I do experience where the battery will run out at night even when the R700 is powered off.

  I recently disabled the option of USB charge but this has not resolved the problem (even if I never used it actually load anything, it seemed to me a good starting point).

  I was wondering if this issue has been seen a resolved elsewhere before asking Toshiba to replace battery?

  Thank you
  SystemShock.

  Have you also tried this - http://aps2.toshiba-tro.de/kb0/FAQ9C015N0001R01.htm?

• 1. restore HI-dpi standard saved even 2 jpg sizes? 2. why muse saved png to jpg? (the html export)

  Hello

  I'm working on my homepage with the last muse 2015.1.0.2309

  Fast 2 questions please:

  1. when I started my drawing with the global "Hi-DPI" setting and would now go back to "standard" why muse record 2 different size jpg image, even if I've cancelled "Hi-DPI" setting?

  2. when I export my finished site in a folder on my imac, why muse implements a PNG to a jpg image, I fall into the layout of muse?

  
  

  Thank you, peter
  

  At your breakpoints of the site? If so, the images are optimized and exported breakpointwise.

  If you use effects, which introduce transparency, Muse needs to convert a jpg in PNG because JPG doesn't support transparency.

• Why Photoshop still objects out of our screen?

  Can you tell me why our objects coming out of the project after the harvest are still there? It's a rubbish every time.

  For example. I have 100 items in my project, then I've cropped to only 4 items, but look at my diapers. There are still here and there are completely useless.

  Why Photoshop is still catch useless objects? There is even not a 'objects' because we can not touch and move them, we cannot see them. We can only see their names.

  

  Culture changes the size of the document, it does not remove the layers you have created, even if the layers end by empty or appearing as empty (because the content is of the canvas after your harvest).

• Why is my desktop stop often randomly, at all hours of the day and night without prompting even when I use the computer. This is even though I changed the power option setting.

  Why is my desktop standby stop so often?

  It appeared sometimes several times per day or night. He stops consecutively, at random, at any time of day or night time. Even when I was with the computer, there is no incentive to me. The screen is blank. My computer nevers switch down. It's on 24/7-24 hours and 7 days, 365 days.

  It happened like this:

  1. you can hear the exhaust off the computer fan all of a sudden. There was no incentive. You can hear computer calmed down suddenly. The fan can be seen from the back of the grid of ventilation of the processor of the computer of the metal casing.

  2. the screen monitor suddenly stop. The screen is blank. The indicator light on the bottom of the screen of the monitor is always lit. He showed the monitor screen is on and running.

  3. When you look at the led on the computer, it is still lit. This shows that the computer has on photo and runnig. It is dormant, however.  He showed the computer CPU is entered in mode 'sleep'.

  4. whenever this judgment occurs, I would like to shut down the computer and restart the computer from scratch. I pressed the power button on the computer to stop it.

  5. I then press again the start/stop button to restart the computer, restart the computer, and then when she comes back to life, I clicked to restore sessions, and then I keep using the computer again.

  6. the process of restarting the computer was like that, as stops have been going like that for five months and is always like that, because I have been unable to solve. The point of contact in the power button is not more urgent are frequent.

  7. I changed the VGA cable as I said by a computer hardware that my problem could be due to the VGA cable is old, as in the VGA cable copper wire that feeds on the computer to the monitor screen can be broken or twisted, and so the video signals are not stable to feed the data to the screen of the monitor.

  8. Although I don't think that was the case, as my cable never touched the ground, or cluttered or kick or broken, I still went ahead to change the existing cable 15 pin VGA to 3 years with a new as it was only 3 males - the range of the cheapest I found in the shop costs...

  9. However, even if the VGA cable is changed, the stop is always the same, as before.

  10. on another month, I learned by my friend that I should change the setting in the computer mode 'sleep'.

  11. the new settings made in start/programs/system and Security / Option/power Power Plan/High Performance / 'Turn off display' to 'Never' and 'Put on the eve of the computer' to 'never '.

  12 even if I changed the setting of "Balanced (recommended) 'High Performance'" and two high-performance setting has been changed to "Never", the judgment fixed computer sleep mode, and as usual, no warning, the screen of the monitor erased.

  13. it seems the Option "power" and "Power Plan" and "Balanced" or "High Performance" in Windows 7 does not work. Window 7 does not in my computer.

  14. whenever I rebooted and restarted the computer, it is some normal time to see the operating system, repair files stop suddenly, before may be back from normal window of operation conditon.

  15. for more information,.

  My computer is not a brand. It was customized and installed. He bought two or three years ago. The use of the 350 GB hard drive is used by 50%. The computer in the past goes to sleep when there is no movement of the mosue for 15 minutes, or when not in use. He wakes up again when there mouse moves to restart the CPU and turn on the monitor screen.

  Now, he had problem with this kind of stop suddenly attack never wake up its "sleep" again during the month five, which I believe it was several viruses in the files of e-mail in the past months, and when it is very likely that I downloaded from CNET some cleaners or anti-spyware.  I don't know what problem is.

  I then withdrew them a month later of the program/Control Panel / uninstalled program. On the advice of my friend, I then changed version free download AVG.

  16. the information contained in the computer, start/program/computer/properties, gives the following information:

  It's Intel Core Due E7500 @ 2.93 Ghz, 4 GB of Ram, 32-bit operating system, windows 7 Home Premium, 2009.

  It is a Microsoft Firewall protection and is installed with fre download AVG anti-virus protection. He is shown to start/program/system and security / firewall /- and he said: 'Stat window firewall' is 'on '.

  17, finally, with the light of the foregoing, I would sincerely ask the Microsoft community to help solve this problem of closure. I would like to thank all the people in the community who can help me in advance here.

  18. I hope to hear your solutions with you. Thank you.

  Run "cleaners" or optimizers may have caused a number of problems.

  And since you have them installed some time ago a system restore won't help.

  Run the System File Checker

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Run a scan for malware http://www.malwarebytes.org/products/malwarebytes_free/

  Maybe to repair your installation of win

  Ensure that the chipset drivers have been updated by the author of the motherboard

• Why some thumbnails appear dark, although the photo itself is correctly exposed. When enlarged to full screen with the SPACEBAR or open in Photoshop, exposure returns to the correct appearance.

  Why some thumbnails appear dark, although the photo itself is correctly exposed. When enlarged to full screen with the SPACEBAR or open in Photoshop, exposure returns to the correct appearance.

  «Click on the image and click on "clear cache for selection".»

  Try this out and let us know if this helps