Similar Questions

• Colors change when the downloaded on Youtube (desaturated)

  I found an old discussion about the same question, but it was not an answer.

  My videos colors change when I upload them on Youtube. Colors are desaturated roughly. I can solve the problem of really saturated video rendering, but y at - it another way to avoid the colors to change?

  I use first cs6 and Windows pro. I used the h.264 settings, but I think that I had this same problem with other parameters too (but not sure). Should I try with other rendering parameters or wrong my creation parameters?

  Thank you!

  Problem solved! Somehow, the problem was my internet browser, Google Chrome. With other browsers, I don't have the problem of color. And after you reinstall chrome it works also very well with Chrome.

• Background color changes when you save a theme

  Just did a new install of Windows 7 Home Premium and has found that, when I save a theme, the background color changes from black (what it was worth) to white. Another thing to note is that when I save the generic theme "Custom Theme" (meaning an unsaved theme) remains, and the background color in the registered theme is changed and does not change when I click on the "custom theme". This is a new installation, so the only software that has been installed is video drivers, network cards drivers, the drivers of the antivirus and sounds. I've used the System File Checker, and he found no problem.

  Hello

  I recommend that you follow the steps from the link below and check if it helps.

  Create a theme

  http://Windows.Microsoft.com/en-us/Windows7/create-a-theme

  Hope this information helps.

• Help with unexpected photo color changes when loading

  Hello

  I have learned things for a few years and doing pretty good to the mounting

  photos like portraits.

  Recently edited portrait high key, when I compared the RAW CR2 file in flt along the side of the photos

  converted to psd Adobe, colors where change after the opening and saving to the psd format.

  The thing is that I did no changes.  I just open the raw file, then click Open edit thought go in ele.

  Once it opens as a psd, the colors have changed.

  Camera is set to Adobe RGB.  ELE set to manage colors for printing.

  Is this normal, or something I'm doing or not doing.

  Suggestions and recommendations requested.

  Txz.

  Will be

  I understand that you compare side by side on-screen:

  -l'image in the ACR dialog, without any changes

  -l' new image observed after opening in the editor and saved as psd and reopened in order to be able to compare side by side.

  I agree that you should not see any significant color change.

  Notes about your settings:

  -Camera set to Adobe RGB: good for parameter ignored with raw files, JPEG files (PSE, the choice between sRGB or aRGB ACR depends on the second parameter in the Editor: always optimize for printing). Are not relevant to your problem.

  -Always optimize for printing: refers to the raw data will be converted to aRGB for printing and shown according to your screen. This is the right setting, if you want to print in ARGB.

  So, there's nothing wrong with your settings.

  Y at - it a bad screen color profile saved on your computer? Which could happen with other software or screen attempt calibration tools...

  I can't help much in this situation, but it might be useful you have described the color differences s two views. For better visibility compare colors, beware of the surrounding parts of images: If you're on a light background (ACR) and the other in a dark (editor), you see exactly the same colors.

• Why a background image of body tag does not appear in a browser?

  I put a gif image to repeat as a background in my body tag and I can't seem to preview in a browser. I see the background very well when you do a live view in DW. I tried other images and none will preview in a browser. I tried to shoot bad all I can think why it does not work and at this stage I am dumb-founded. Here, any help would be appreciated more, I am flooded with work and I really need to get off this file for the approval of the customer. Thanks in advance for any response - Vanessa

  External STYLE sheet

  {body

  color: #000;

  text-align: center;

  are-family: Verdana, Geneva, without serif.

  are-size: 100%;

  background: #DAD7C5 url(/_assets/bck.gif) top left horizontal;

  }

  Source code of the page:

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"

  < title > sales Forster < /title >

  < link href = "_css/main.css' rel ="stylesheet"type =" text/css"/ >"

  < style type = "text/css" >

  < / style >

  < meta name = "Keywords" content = "" construction toys, green toys, eco-crafts, toys Europeans, products for European baby, made in Canada, Flathead in babies, representatives of Canadian sales, nest of love, Sesame Street, Roary, Nascar, Ben 10, Tamagotchi, Harumika, Disney, children of cookbooks, k ' NEX, Bandai, Eebee PlayMais, clicks, Happy Cube, Babymoov, MOMMA, Bloco, Handstand Kids "/ >"

  < script src = "scripts/swfobject_modified.js" type = "text/javascript" > < / script > "

  < / head >

  < body >

  < div id = 'wrapper' >

  < div id = "container" >

  < div id = "logo" > < / div >

  < div id = "header" >

  < p > < span class = "blueBold" > sales </span > Forster provides to Canadian retailers

  You can download the page on your server?

  I guess that's all the code of your page, right?

  It could be a problem of path to the background image...

  /Assets/

  assets /.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• Lightroom 3 and CS5 color change when recording to JPEG

  Desperately need help on this one...

  In a nutshell if I use lightroom 3 only and print the images printed images are exactly the same on the screen - so I guess the calbration of the screen is correct.

  If I use lightroom 3 and export to CS5 to continue to make adjustments more when I save the image in jpeg, it seems to have saved well. However if you then maximize the photo in full-screen colors change - radically. Basically, they look aweful. They become quite dull and lose it saturation settings (which were made originally in Lightroom). They print this much too.

  It drives me crazy. I don't think that it has nothing to do with the calibration because it is OK when just using LR3.

  I played with it quite a bit to try to find a solution and have found that if I export for CS5 and Lightroom makes no changes to the photos but just save - she always changes the colors

  Sorry - if it makes a difference... may not, but I have not exported from lightroom for CS5.

  Everything I do is select the right click, click on edit in the > Adobe Photoshop CS5.1...

  Then in CS5 it opens and appears exactly the same as in LR

  From there, I click on file > save under > Jpeg formats and there is an another labeled checked - ICC profile: Prophoto RGB (not really sure what it is and there is no other options to change)

  I tried to show a difference in color by joining the photo.

  Photo right is edited in Lightroom. These colors are what you see when it is maximized on screen and the colors print correctly too. This photo has been open and then in CS5 (photo left) (with LR adjustments) and saved as jpeg and you can see how to change the colors. But you do not see the change unless the screen is completely optimized - and she that prints a lot too.

  I don't know what to do someone had similar problems?

  

  Yes.  Had something similar last night, but with LR 4.1. I suspect that we each have a color profile mismatch, although I had no time to solve my problem yet.

  My first thought is that the native LR color space is Prophoto default, but PhotoShop must have its 'working color space' specified by the user.  Unless Prophoto is specified in PS, there will be differences in color on a Prophoto image scale (sensitivity) of color-travel will vary from one image to the opening image.

  To change the workspace in PS, pull down the Edit menu and select "color settings".

  Don't forget to check the box to inform you and ask how you want to handle the inadequacy of the color profile.

  As the previous poster said, prophoto is a bad choice for the use of the web.  probbaly the most commonly used color space sRGB is relatively low

  Good luck.

  Jerry

• Colors changing when you export files HAVE in InDesign

  Hello

  Since the upgrade of CS6 CC last year, I think my profiles color or something are put in place bad between CS programs. When I'm working on a file in Illustrator (RGB) and then place it in indesign, as soon as I export the PDF the colors change. For example, a series of gray tones will be released as blue and bright orange. I'm not clued up with the settings of all programs and the inner workings, but I've never had this problem before, I've never had to change all the color settings, so think, need a new default setting I don't know.

  I understand there are a many settings that could do that. I export the PDF RGB file too, but I can't see a likely switch to CMYK. Is anyway to reset all the settings back by default so that I can at least try and get the settings I usually use with CS6.

  Don't know what to do... any advice would be much appreciated! Thanks in advance

  Your Illustrator color settings is a problem. Choose 2 North America prepress of the parameters, which will assign sRGB to new documents and allow you to assign a profile to the existing docs. You can also consider to synchronize all your Adobe applications through the bridge Edit > color settings.

  As test try to synchronize your color for North American prepress settings, create a new document, place the file I and export with the output parameters in my first post.

• Why my background image isn't appearing?

  I want to have a background image for my central section. so I made the background of this image in my css. but the image will not be displayed. what I am doing wrong? Thank you

  http://www.mamacinis.com/

  Sorry my mistake,

  I meant to keep the rest (height, etc.). So what you have now, add height, not width need because by default is 100%

• Font color changes when downloaded

  Created a new site. seems perfect locally in the browser. During the site build DW "closed unexpectedly. After uploaded to the server of my ISP and read in the browser, certain colors of fonts has changed. I deleted and published to the server several times... same results. I posted another copy of the site... same thing... change of font color.

  I tried to download with FileZilla and had the same problem of font color change.

  My system: version 10.6.8 DW CS5, FireFox, Mac.

  How can I fix?

  Thank you

  Brown text, 'Topic Spangler and son', should be red.

  Nope, it's good Brown, since the rule for #content h2 in tan.css replaces the same rule in styles.css (the link to tan.css occurs later in the code than that of styles.css). Same reason for the

  tag. Remember the rule of the greater specificity in the CSS!

• Why my text does not disappear when I place it on the page in CS4?

  The block of text is visible. Is there a setting I used by mistake? The text in the frame is visible on the editing table, but when I place it on the map, I get the indicator of small red overflow on the text block. Can not understand this one. It is in its own layer on top. Thank you.

  Looks like you put it on something that has an applied text wrapping.

• Why foreground/background colors change when I switch to quick mask? I can't stop this change?

  I click on------, and the foreground/background colors switch. Why? How can I control this behavior of Photoshop?

  It would be simpler for my workflow of Photoshop that I knew what I was using the color.

  Hello

  In quick mask mode Photoshop automatically default gray scale, with a background of black and white, background color color mode. When you use a painting or the tool in quick mask editing mode, keep these principles in mind:

  • With black paint adds to the mask (the Red overlay) and decreases the selected area.
  • Painting with white clears the mask (the Red overlay) and increases the selected area.
  • Gray paint partially added to the mask.

  Thank you

• Number of the color changing when moving the pipette around the outline color or background

  When I move my pipette above and move around to a United of contour or background color in the tool bar, window properties and color mixer, I have different web color numbers. Why is this? Flash never used to do (I use Flash Professional 8.0) and of all rights should not (since the color is vector).
  
  See
  
  http://img.Photobucket.com/albums/V292/pancreasboy/Misc/colour1.jpg
  
  and
  
  http://img.Photobucket.com/albums/V292/pancreasboy/Misc/colour2.jpg
  
  All rights should not change the number of color, but it changes from B53110 to BD3110, now this may seem insignificant, but it can sometimes be really sensitive, and especially if I continue to use the eyedropper again and again to get the color once again.

  Guess what it was in the end?

  I have 2 monitors of mac, one has been updated with the "Studio Display 21" and the other to the 'Studio Display 21 calibrated' and for some reason that it is perform once chosen Flash color values

  so I fixed them both the same settings and all about hunky dorry!

  Thanks for the trouble, y ' All!

  (although SHIFT-option duplicate drag still does not work, but it's getting sent in another topic)

• CNC - text and background color changes when you use the inc/dec

  Hello

  I develop an application that has a sign with a black background and green or red numbers. I have added digital controls and set the text color and text background color attributes accordinglingy. I put the control digital hot or validate command mode and display the arrows of inc/dec, because I want to incr/Decr numbers.

  The problem is that when I run the app and I hit arrows inc/dec, then the colors inside the scope of digital control become reversed: black background becomes white and cyan green number. I created an assosicated callback with digital control and tried to force the text color and the background, in the EVENT_VAL_CHANGED section, by using the SetCtrlAttrribute() function, but nothing helped. Also added ProcessDrawEvents did not help.

  When I mouse click again outside the digital command, then it returns to its original colours (green, black text background).

  Suggestions as to how can I fix?

  I want it keeps its original colors at all times, even when I am clicking on the arrows incr/Decr...

  Kind regards

  pgriep

  Hello Roberto,

  I thought it would be another way to fix it. Just hoped that I could fix it in setting or by disabling an attribute.

  Thanks for the effort!

  See you soon,.

  pgriep

• Why the outline color changes when I move the layers?

  OK, I have a box of lavender with a black line on the green channel.  Blue Coat I have everything: text, lighter lavendar bg, graphics.  When I move the box on the top of the layer of bg, it seems, see below

  

  but I need for the small box under the graph.  receive move the Green layer below the blue layer, the black line becomes gray:

  

  How can I keep black?

  This is the area where you changed the opacity by movingthe slider in the effect controls panel? That creates a condition of transparency and the black border can also take on transparency, according to the case you selected the object or filling while moving the cursor.

  In any case, I don't think you want transparency in this position at all, and that full must be a solid color, as the race should. If you want the fill to be a shade of another color, a shade of that color and create a shade of tint that (a good idea since you can easily apply it many places), or fill the object with the color chart, then move the slider opcity in the SWATCHES Panel to adjust the tint.

• The color changes when translucent white

  I'm trying to overlap several translucent color objects, and I need to have a white object behind them so I can overlap other objects in the background. Anyway, when I decrease the opacity on the colors, they change colour. Any way I can avoid this? See the example in the image:

  

  It is a standard white rectangle with default white fill and black stroke and a red top, square with an opacity to 30%. The Red should look like the rose outside the overlap region, why it changes color over a white object?

  Try it with preview enabled overprinting. This will give you a true vision of the final output.