Similar Questions

• Why foreground/background colors change when I switch to quick mask? I can't stop this change?

  I click on------, and the foreground/background colors switch. Why? How can I control this behavior of Photoshop?

  It would be simpler for my workflow of Photoshop that I knew what I was using the color.

  Hello

  In quick mask mode Photoshop automatically default gray scale, with a background of black and white, background color color mode. When you use a painting or the tool in quick mask editing mode, keep these principles in mind:

  • With black paint adds to the mask (the Red overlay) and decreases the selected area.
  • Painting with white clears the mask (the Red overlay) and increases the selected area.
  • Gray paint partially added to the mask.

  Thank you

• Size of the image changes when you move an image between Lightroom and CC.

  Size of the image changes when you move an image between Lightroom and CC.

  I opened a .dng image in LR and then opened it in the develop module.  I clicked on Crop Overlay and then on the "As Shot" (the lock is closed) menu drop-down and cropped to 11 x 17 and click 'Done '-.

  I click Ctrl-E and the image opens in the CC.  I click on the Image > Image size and the size of the Image is 13,288 inches on 20,533.

  Why change the size of the image?

  I believe that there is a menu to control the size of the image, and I've looked everywhere I see in LR and CC, I have googled various descriptions and I checked both Kelby books, but I can't understand not just how to keep the image at a uniform height when moving between LR and CC.

  Help!... Please?

  The size of the image has not changed. The number of pixels has not changed. Let me tell you. The number of pixels has not changed to a single pixel.

  The numbers relatively meaningless displayed by your software have changed.

  The image is always format 11 x 17 (17 divided by 11 = 1.545 and 20.533 divided by 13.288 = 1.545)

• Colors change when the downloaded on Youtube (desaturated)

  I found an old discussion about the same question, but it was not an answer.

  My videos colors change when I upload them on Youtube. Colors are desaturated roughly. I can solve the problem of really saturated video rendering, but y at - it another way to avoid the colors to change?

  I use first cs6 and Windows pro. I used the h.264 settings, but I think that I had this same problem with other parameters too (but not sure). Should I try with other rendering parameters or wrong my creation parameters?

  Thank you!

  Problem solved! Somehow, the problem was my internet browser, Google Chrome. With other browsers, I don't have the problem of color. And after you reinstall chrome it works also very well with Chrome.

• Number of the color changing when moving the pipette around the outline color or background

  When I move my pipette above and move around to a United of contour or background color in the tool bar, window properties and color mixer, I have different web color numbers. Why is this? Flash never used to do (I use Flash Professional 8.0) and of all rights should not (since the color is vector).
  
  See
  
  http://img.Photobucket.com/albums/V292/pancreasboy/Misc/colour1.jpg
  
  and
  
  http://img.Photobucket.com/albums/V292/pancreasboy/Misc/colour2.jpg
  
  All rights should not change the number of color, but it changes from B53110 to BD3110, now this may seem insignificant, but it can sometimes be really sensitive, and especially if I continue to use the eyedropper again and again to get the color once again.

  Guess what it was in the end?

  I have 2 monitors of mac, one has been updated with the "Studio Display 21" and the other to the 'Studio Display 21 calibrated' and for some reason that it is perform once chosen Flash color values

  so I fixed them both the same settings and all about hunky dorry!

  Thanks for the trouble, y ' All!

  (although SHIFT-option duplicate drag still does not work, but it's getting sent in another topic)

• Why my police/text change when I pass the classic 3D Ray traced 3D in After Effects?

  My fonts/text changes when I pass the classic 3D Ray traced 3D. Why would he do that? In addition, I can't have the fonts/txt look the same after I switch from classic to the Ray traced. How can I get it to look the same?

  'Normality' disappears because blend modes do not work in the ray-traced rendering engine. Fortunately, you just had it set to normal and weren't trying not to use the screen or multiply or something else. It shouldn't be a problem for you.

  The text changes color is because the ray-traced rendering engine is made things very differently. You must go in the hardware settings and adjust them to the ray-traced rendering engine. For example, it is reflective? If so, that would make a big difference in how it looks based on what you have reflecting.

  That said, Adobe is not putting more work in the ray-traced rendering engine, so if I were you, I would focus my learn more about the new way to do 3d in AE (because he will get better and better as they put more time development in there). How is this? In this way: Details of CINEMA 4 d with After Effects integration

• Bug: Façade objects relative position changes when you move the fusion VI on block diagram

  I posted a bug report on the LAVA, here:

  http://forums.lavag.org/front-panel-objects-relative-position-change-when-placing-merge-VI-onto-bloc...

  If someone at home OR can reproduce, can I please get a CAR #?

  Thank you

  -Jim

  Hi Jim,.

  This was reported to R & D (# 139212) for further investigations.  I don't know if it's more embarrassing fall into the range of functions and reorganize the façade or drop out of the front and hope that the code of the Subvi is not disseminated in the block diagram.  Because the code (or orders) are selected after a fall, and you can switch between diagram and panel above all keeping this selection, at least you can move the code as a whole, right?

• colors changing when I copy in fireworks cs4 to illustrator cs4

  Hello

  Im having some problems with illustrator, the main problem is that when I move my logo in fireworks by copy - paste, the colors always change to a much darker green #6DAA25, to what it is in illustrator #8CC340. IM pretty new to illustrator, but my guess is, its something to do with Fireworks, not been able to read the file correctly.

  the second problem is that I want the majority of the image of this color #8cc63f, but any time I apply it to something as the text the number will increase to a different number after that I have applied, and then click other where. its not so much a problem as long as the color is slightly different, but I still not understand why illustrator cannot apply this color #8cc63f.

  the weird part is also a part of the text cannot be applied #8CC640 and continues to change to #8CC641, but can the rest of the text, which is separated. Again its not noticeable but boring, that the whole image can be incorrect.

  The last problem im having is that whenever I click on, for example, the Paintbrush and change the size of the stroke, the size of race will automatically change down to 1 pt, when I start using the brush.

  The main problem im having is the first, I can work around the other two, just thought to mention it, wrap it is maybe a bug or it being a popular problem.

  in any case if you can help me o would really appreciate it, thanks.

  What are the color settings and the document color space into Illustrator?

  Change your color space in artificial intelligence in RGB.

  Fie > Document Color Mode > RGB

• Background color changes when you save a theme

  Just did a new install of Windows 7 Home Premium and has found that, when I save a theme, the background color changes from black (what it was worth) to white. Another thing to note is that when I save the generic theme "Custom Theme" (meaning an unsaved theme) remains, and the background color in the registered theme is changed and does not change when I click on the "custom theme". This is a new installation, so the only software that has been installed is video drivers, network cards drivers, the drivers of the antivirus and sounds. I've used the System File Checker, and he found no problem.

  Hello

  I recommend that you follow the steps from the link below and check if it helps.

  Create a theme

  http://Windows.Microsoft.com/en-us/Windows7/create-a-theme

  Hope this information helps.

• Colors changing when you export files HAVE in InDesign

  Hello

  Since the upgrade of CS6 CC last year, I think my profiles color or something are put in place bad between CS programs. When I'm working on a file in Illustrator (RGB) and then place it in indesign, as soon as I export the PDF the colors change. For example, a series of gray tones will be released as blue and bright orange. I'm not clued up with the settings of all programs and the inner workings, but I've never had this problem before, I've never had to change all the color settings, so think, need a new default setting I don't know.

  I understand there are a many settings that could do that. I export the PDF RGB file too, but I can't see a likely switch to CMYK. Is anyway to reset all the settings back by default so that I can at least try and get the settings I usually use with CS6.

  Don't know what to do... any advice would be much appreciated! Thanks in advance

  Your Illustrator color settings is a problem. Choose 2 North America prepress of the parameters, which will assign sRGB to new documents and allow you to assign a profile to the existing docs. You can also consider to synchronize all your Adobe applications through the bridge Edit > color settings.

  As test try to synchronize your color for North American prepress settings, create a new document, place the file I and export with the output parameters in my first post.

• Help with unexpected photo color changes when loading

  Hello

  I have learned things for a few years and doing pretty good to the mounting

  photos like portraits.

  Recently edited portrait high key, when I compared the RAW CR2 file in flt along the side of the photos

  converted to psd Adobe, colors where change after the opening and saving to the psd format.

  The thing is that I did no changes.  I just open the raw file, then click Open edit thought go in ele.

  Once it opens as a psd, the colors have changed.

  Camera is set to Adobe RGB.  ELE set to manage colors for printing.

  Is this normal, or something I'm doing or not doing.

  Suggestions and recommendations requested.

  Txz.

  Will be

  I understand that you compare side by side on-screen:

  -l'image in the ACR dialog, without any changes

  -l' new image observed after opening in the editor and saved as psd and reopened in order to be able to compare side by side.

  I agree that you should not see any significant color change.

  Notes about your settings:

  -Camera set to Adobe RGB: good for parameter ignored with raw files, JPEG files (PSE, the choice between sRGB or aRGB ACR depends on the second parameter in the Editor: always optimize for printing). Are not relevant to your problem.

  -Always optimize for printing: refers to the raw data will be converted to aRGB for printing and shown according to your screen. This is the right setting, if you want to print in ARGB.

  So, there's nothing wrong with your settings.

  Y at - it a bad screen color profile saved on your computer? Which could happen with other software or screen attempt calibration tools...

  I can't help much in this situation, but it might be useful you have described the color differences s two views. For better visibility compare colors, beware of the surrounding parts of images: If you're on a light background (ACR) and the other in a dark (editor), you see exactly the same colors.

• Lightroom 3 and CS5 color change when recording to JPEG

  Desperately need help on this one...

  In a nutshell if I use lightroom 3 only and print the images printed images are exactly the same on the screen - so I guess the calbration of the screen is correct.

  If I use lightroom 3 and export to CS5 to continue to make adjustments more when I save the image in jpeg, it seems to have saved well. However if you then maximize the photo in full-screen colors change - radically. Basically, they look aweful. They become quite dull and lose it saturation settings (which were made originally in Lightroom). They print this much too.

  It drives me crazy. I don't think that it has nothing to do with the calibration because it is OK when just using LR3.

  I played with it quite a bit to try to find a solution and have found that if I export for CS5 and Lightroom makes no changes to the photos but just save - she always changes the colors

  Sorry - if it makes a difference... may not, but I have not exported from lightroom for CS5.

  Everything I do is select the right click, click on edit in the > Adobe Photoshop CS5.1...

  Then in CS5 it opens and appears exactly the same as in LR

  From there, I click on file > save under > Jpeg formats and there is an another labeled checked - ICC profile: Prophoto RGB (not really sure what it is and there is no other options to change)

  I tried to show a difference in color by joining the photo.

  Photo right is edited in Lightroom. These colors are what you see when it is maximized on screen and the colors print correctly too. This photo has been open and then in CS5 (photo left) (with LR adjustments) and saved as jpeg and you can see how to change the colors. But you do not see the change unless the screen is completely optimized - and she that prints a lot too.

  I don't know what to do someone had similar problems?

  

  Yes.  Had something similar last night, but with LR 4.1. I suspect that we each have a color profile mismatch, although I had no time to solve my problem yet.

  My first thought is that the native LR color space is Prophoto default, but PhotoShop must have its 'working color space' specified by the user.  Unless Prophoto is specified in PS, there will be differences in color on a Prophoto image scale (sensitivity) of color-travel will vary from one image to the opening image.

  To change the workspace in PS, pull down the Edit menu and select "color settings".

  Don't forget to check the box to inform you and ask how you want to handle the inadequacy of the color profile.

  As the previous poster said, prophoto is a bad choice for the use of the web.  probbaly the most commonly used color space sRGB is relatively low

  Good luck.

  Jerry

• Font color changes when downloaded

  Created a new site. seems perfect locally in the browser. During the site build DW "closed unexpectedly. After uploaded to the server of my ISP and read in the browser, certain colors of fonts has changed. I deleted and published to the server several times... same results. I posted another copy of the site... same thing... change of font color.

  I tried to download with FileZilla and had the same problem of font color change.

  My system: version 10.6.8 DW CS5, FireFox, Mac.

  How can I fix?

  Thank you

  Brown text, 'Topic Spangler and son', should be red.

  Nope, it's good Brown, since the rule for #content h2 in tan.css replaces the same rule in styles.css (the link to tan.css occurs later in the code than that of styles.css). Same reason for the

  tag. Remember the rule of the greater specificity in the CSS!

• Why the layers collapse function is disabled?

  It is simply theoretical.

  By default, Illustrator is apart the layers.

  I can't collapse the layers in documents created by my colleagues.

  I've asked about it with them and they shrug their shoulders and say "don't know why" (although I think just to be cheeky).

  I know how to reduce these layers - I just want to know why/how they disable the function.

  Thank you

  Review the options palette layers (located in the menu of the layers palette).

• Button color change when the user clicks on

  I am a new user of Captivate 9 (no experience Captivate). I have a project with buttons to trigger changes multistate and navigate between slides. In most cases, the buttons change to a red/pink color when clicked. How can I control the style/color of a button when you click it to prevent this? I have the same result with an overview of the project and the published file. Thank you!

  Check the object for the buttons styles (you don't say what kind of button that you use) in the Style of the object (to be found in the preferences) Manager:

  

  Look for the button type you use (the screenshot is for the default Quiz button, you see there is also a button to default text style, and style to the other type of buttons, all forms have both possible States because they can be used as buttons). Expand the style (by using the triangle) and watch the rollover State. You can change this State, in a low State as well. It's not clear your question if you speak the turnaround or the Down State. It is the States integrated for the buttons. The color you see in the States depends on the theme you use in your project. Each theme has a theme color palette.

  It is normal that a button has these States, why would you want to have the same status for the three: normal, rollover, down? I have published a few articles to CP9, where you will see different types of States of the buttons, here are two links:

  Play with Captivate 9 - Captivate blog

  1 share = 5 buttons toggle - Captivate blog