Dynadock problems - new software install

Similar Questions

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.

• Problems to install some new software, Setup crashes

  De : gdwtch

  I have an Acer Aspire 5920 computer laptop under Windows Vista Home Premium and I have problems to install new software. Here are some examples: Java iTunes, Winzip, updates... virtually everything that uses the Microsoft service msi installer, I guess.

  I tried many different things to solve the problem:

  Re-register the vbscript

  Re-register msiexec

  Install the version 4.5 of the installer

  Run the Windows Installer Cleanup tool on the items I've tried to install (by the way this tool would not install either - I had to copy the executable files from the temporary directory created by the Installer)

  Check that the msiexec service has been set to manual

  Cleaning of all parts of temp

  I tried to turn on Installer connection by setting the registration in the registry key, but I probably did it wrong, because I see no additional newspaper created in temp area...

  I noticed that some facilities will end if I let them run at night. For example, was the case with the installation of version 4.5 to install... I just let him work when I went to bed and in the morning the machine has rebooted itself and seems no worse than before (and 4.5 does not appear to be installed, according to msiexec /?). But no luck with the other facilities more. Strangely, won't install things like updates of Firefox, no problem. I guess that they do not use msi...

  Unfortunately, this behavior started several months ago, so I can't pin down to change the particular system; I've just been putting upward with it. I just finally reached the end of the coil because someone gave me an iPod and now I NEED to download iTunes installed if I want to use.

  I really hope someone out there has a new idea for me to try, like waaay, I spent too much time on this already!

  From: John Barnes

  I had a similar problem which was caused by the Installer tries to set a restore point.  You can try to disable the restore point creation.  I have spent way too much time and got no results.  Some programs would run after restore point expired, others not. I finally gave up and reinstalled Windows Vista.  Now, I have no problem and the process was pretty painless.  Hope you're not massive amounts of resettlement programs.  :-((

  Another response of the community of Windows Vista discussion groups

• Computer will not properly install update KB976098 + new software

  I was a lot by browsing this site and saw that many people is facing the same problem. What I did find was a person with software problems.

  My computer was purchased 26/11 this year with Windows 7 pro + Microsoft office home and student . One day Windows were 27 updates to install and therefore has been left overnight. In the morning update no. 27 was still install and never finished. Had to restart the computer to exit the update screen. days later there were 4 updates to install. Still once, the last update was never completed.

  Now, there's only 1 update important remaining, KB976098 , the fix for the time zones that I presume.

  Not only the update will not install, now the new software may not be installed properly:

  I tried some actions (such as downloading stuff, install software, games) while windows tried to install the
  Update:

  • During the installation (for example.) Adobe Reader, Comodo FireWall took more than a minute to display its notice of default on an attempt to install software on the computer and therefore compromised the initial installation.
  • Turn off Comodo Firewall does not solve the problem. Delay of the computer respond when an action of the instalation was performed is the same.
  • The installation of update process could not be stopped once he was "installation."
  • The icon of 'disable' had no notification "update", but once to close the office and displays the message "loging off", the computer is never extinguished.
  • While playing an online game, nothing unusual has happened, no delay on start-up or exit.
  • When you save things like a packadge power point (for conferences of 2007 to display on older versions) the application would freeze and the package has never been created
  • Presentations PowerPoint would have graphics errors, such as the black and white rectangles containing all movable objects.

  After Force-reboot of the computer, cancel the auto-update feature and remove it from the list self-install, I retested evevrything:

  • Adobe Reader has been installed successfully, even with Comodo Firewall active
  • Comodo Firewall has reacted instantly to any attempt installation
  • More online games the same
  • PowerPoint correctly displays images and created packages without error
  • Turn the computer off was possible without forcing the stoppage.

  Now, I'm checking the updates installed and found out there are only installed 23 (in the Control Panel installed updates ). The history of the update displays more than 74 update. As mentioned previously, the first batch of update contained 27 updates, No 23 or 24. I checked some of these updates to the story:

  • There are a few updates, eg. update of security for microsoft office system who have 10 diferent KBs (being the first of its kind, his last KB974234 KB936514). Five of them have been installed twice: KB936514; KB951944; KB954326; KB956828; KB960003

  I guess in these 74 updates, replacents occurred in 23 updates, and some are not microsoft partners to be included in the Panel of installed updates . I really don't know, that's why I am asking :D

  I tried the more possible ways to install the update, downloading it mannualy, disabling the firewall, close all other applications, etc. etc...

  I would like to know the following:

  1. Why is not install update KB976098?
  2. Why other users have the same problem with recent updates?
  3. How to prevent the installation of update if the stop command does not work?
  4. How can I turn off the computer without having to install the downloaded update?
  5. Are double downloaded updates a problem?

  I wrote this for so long now. If I forgot anything, the question might be already in the text.

  Thank you for your time and patience! :)

  Read the "Updates since the previous cumulative Windows time zone update" section of http://support.microsoft.com/kb/976098. If you do not reside in one of these 14 zones, really useless this not (IMHO) security-related update, so you can just "hide":

  1. stop the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > Right click on run , and then select run as administrator >
  (type or copy/paste) %windir%\SoftwareDistribution > [OK]
  Open the download folder and delete its content
  Close the window.

  3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update: Select the installed updates: right click on the Update for Windows 7 (KB976098) | Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.

  4. start the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click Start
  (Stopping the service will take a moment)

  =====================================
  To restore/show updates in Win7: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.
  =====================================

  Comment: For some reason, a lot of Win7 users have had problems trying to install KB976098. for example, http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/b620bb51-11e9-48f4-9a45-4034498cb8e1

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Hello

  (1) have you made changes before the start of this issue?

  (2) when you get the error message?

  (3) is the specific question of the installation of the printer software?

  (4) what is the brand and model of the printer?

  It seems that you need to fix .net Framework installed on the computer. Follow this link and see if it helps.

  Fix the .net Framework installation

  http://support.Microsoft.com/kb/976982/en-us

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if that helps.

• Cannot install new software because XP has said that there is another current installation

  I try to install the new software of the printer and it stops telling me that there is an another current facility and cannot install new software until the current instalation ends.  She does whenever I try to install new software.  He did it with zune, Quicken, etc.

  Hello

  1. have you you can all changes on the computer before this problem?

  Check if the problem persists in the clean boot state.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

• HP Officejet Pro 8620: Uninstalled the software and now Support HP does not open so I'm unable to install new software

  I have upgraded to Windows 10 and have since had problems with the scan from the printer to the PC. In the end, I uninstalled software according to the instructions, but when I tried to install the new software from the HP Support page does not recognize that I have a HP product, if I can't access the page to install the new software for Windows 10. My CD is for the older version of windows and can no longer work either. Help! Someone know how to reslove it?

  Simply download the fully functional software and drivers on HP website.

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8610/8620/8630-e-all-in-one-printer-series/5367611/model/5367613

• Cannot install new software

  I was not able to install a new software for a few months. When I tried to install the Windows Update my computer crashed. I spend hours on the phone get it upward and I am trying to copy all my photos on a backup drive so that I can enter the computer to diagnose the problem and not risk losing the photos, but it won't even download free Agent software to the top by car. It is said that it will fail to install. It is said:

  Windows install could not be accessed. This can occur if you are running Windows in safe mode, or if Windows install is not properly installed.

  I'm not running in safe mode.

  Then he said: Error 1719. Windows Setup is not be accessible.

  Really, I don't want to lose my photos, how can I fix the installation software?

  Thank you

  How to re-install Windows Installer:
  http://xphelpandsupport.MVPs.org/how_do_i_reinstall_the_windows_i.htm

  Windows Installer 3.1 Redistributable (v2)
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=889482fc-5f56-4a38-b838-de776fd4138c&displaylang=en

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Update for Windows XP (KB958655-french)
  Install this update to resolve the issue in MSI Installer 4.5
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e0735d57-03cc-42e5-823e-60c9efe74aac & amp; amp; displaylang = in & displaylang = in

  Also:
  Common problems of Windows Installer
  http://support.Microsoft.com/?kbid=555175

  The Windows Installer CleanUp utility (Note: this link has changed the utility he did).
  http://support.Microsoft.com/kb/290301

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• got first code 8024 008 then update new software needs to search for updates, but it will not install failed 11 times

  Mother upgrade and cpu card.  Had to clean install Vist Home Premium for the new configuration to recognize my old HD.  Moved all my files and folders from the old folder to the new installation windows.  Update down loaded and installed more than 100 updates.  Some were unsuccessful.  Installed SP1 and SP2.  Checked today to see if new updates are available, and that's when I got the code.  Second time I tried to check is when he says update windows needs new software to check updates.  Tried 11 times and each time it could not reopen the window update and in the history of its States that it is impossible to install.    Have searched high and low on the site of MS and the web without success.  Any help would be greatly appreciated

  Hello

  1. What is the brand and model of the computer?

  2. What is the security software installed on the computer?

  3. What is the full error message?

  Method 1:

  You can run the fixit from the following link and check if it works:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Try the steps from the following link and check if it solves the problem:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 3.

  You can update the necessary hardware drivers and check once more.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-US/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

  Let us know if it helps!

• whenever I try to install the new software on my computer goes to a blue screen and stop making

  Original title: HELP!

  whenever I try to install the new software on my computer goes to a blue screen and stop making

  Hello

  It takes a lot more information

  What operating system

  etc.

  read this

  How to ask a question

  http://support.Microsoft.com/kb/555375

  -What you trying to do?
  -Why are you trying to do?
  -Do you try already, why and what was the outcome of your actions?
  -What was the exact error message you received?
  -How long have you been experiencing this problem?
  -Have you searched the relevant forum/newsgroup archives?
  -Have you tried all the tools or KB articles or other resources?
  -Have you recently installed or uninstalled any hardware or software?
  -What changes have been made to the system between the time where everything has worked, and when you noticed the problem?

• Vista won't open in Mode safe (after installing new software)

  I loaded new software (Stop Motion Pro) and the next time I rebooted, Vista is entered directly in Mode safe without asking.  I guess it's Safe Mode, although I have read some talk online that maybe he just screwed up my display settings and/or theme.  I tried readjusting my display settings and can't figure out how.  I also tried to remove the new software, but I don't see the option Add / Remove programs in Control Panel.  (The problem is that I want this software, so if I remove it, so what?)

  Hello

  Try a system restore before that has happened - you will need to re - install the software.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows install-"error 1325 - 'Documents' is not a valid short file name"; After upgrading from Vista to Windows 7, cannot load new software. ____

  After an upgrade from Vista to Windows 7, everything on the system seemed to work properly. up to what I tried to re - install everything deleted software or install new software.  As soon as Windows Installer starts the following error message appears: "error 1325 - 'Documents' is not a valid short file name.

  If this could have something to do with the new pads MSFT security permissions on folders (with padlock) during a upgrade as well as related hidden junctions by compared to the user by the system?

  I tried to install the update system of Lenovo and MSFT Windows Installer Clean Up clean in the hope that the software would help alleviate my problems. See below the link on advice from MSFT on the same error.

  http://support.Microsoft.com/%2Fkb%2F328162

  Unfortunately, I cannot even load the previously recommended THAT MSFT software to solve this error.  I also tried to install the software as 'Run as Administrator' and in 'Safe Mode '.  Even if I could not load the software recommended to MSFT, I was able to install iTunes to Apple through Apple Software Update, I guess, that they do not use Windows Installer.

  With the new structure of junction there is several files or links to the same folder across file system, if it is a folder authorization number which specific files/links are I need to remove restrictions?

  Any help would be appreciated, if not I'll have to do a clean install and individually reinstall each piece of software... Thank you.

  I think I found the solution for this point, because I have just encountered the same problem in our environment and here's what I did to solve it:

  -Create a higher level permissions at the root of the folder redirection (for example \\servername\mydocredirfolder): grant the Group authenticated users the following permissions and apply it to "this folder only" ALLOW: list folders/read data, reading, reading attributes, read extended attributes, create files / add data

  I think the MSI is trying to read the free space on the disk on the server, but it cannot because it tries to access the folder where your my documents redirection is sitting.

  Good luck!

• Error code 601.64 when installing new software

  Original title: get an error code of 601.64 when downloading new software on my new laptop HP windows 7

  I recently bought a computer Presario CQ61 HP compaq laptop with windows 7 installed.  Buy HP deskjet all Pro 8500 printer etc. and the installation CD it won't let me download because of my boot operating system.  601.64 code what do I do?

  Hi Paulajwood,

  This could happen if the CD you are using is damaged or non-functional. Follow the link below and download the full feature software and driver and try to install and control what happens.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&lang=en&product=3752459&

  If you still get the same error message please post back with the exact error message and error code.

  Before installing the drivers, put the computer in a clean boot, and then check what is happening. To put the computer in a clean boot follow the link below

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you did with the troubleshooting step 7 follow-up in the same link to put the computer in normal start up.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get error install 2894 window when I try to install new software.

  I apparently have a corrupt riched20.dll and riched32.dll.  This is the second time in a row that I can't install new software.  I worked with the seller on the first and told me I had a problem with riched32.dll and they can't fix this.  I ran Microsoft FixIt program, but it didn't turn anything.  I have a Windows 7 64-bit PC.  Is there a way to get a new copy of them. Thank you.

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Substitute:

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  Click Start Orb, in the box, type search: Regedit.

  Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

  Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

• Error when you try to install QuickTime: another installation is being run-cannot install new software

  Original title: another installation is being run-canot install new software.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I can't identify what software is running. I had this problem in recent weeks. It cannot install QuickTime.
  Thank you

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi marvinsadovsky,

  ·        What is the exact error you get when you try to install QuickTime?

  ·        You are able to install any other application?

  You try to install QuickTime by starting the computer in a clean boot state, because some background programs may interfere with the installation process. To put the computer in a clean boot state, follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.