Blue screen more often (Satellite A50-111)

Hello. My laptop (satellite A50-111) stops with a blue screen. Sometimes when that I start the computer, sometimes, when I'm trying to play a video file, sometimes... I can't understand why... The error messages are inconsistent. They are different all the time (for example: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION or PFN_LIST_CORRUPT or PAGE_FAULT_IN_NONPAGE_AREA or something with IRQ LESS THAN EQUAL etc.).

I suspect that the problem is the graphics card or RAM memory. It is because the file ialmdnt5.dll and ialmdev5.dll were mentioned in the error screens).

I ran a test of memory from a CD bootable (memtest-86) and everything seems to be fine with the memory. However, the memory is not the original one. I did a brief day when I bought the laptop (the memory is TMC - 2 x 512 MB)

Any ideas what the problem might be. The problem is that I have these blue screens more often (I've had them several times before but now I have at least one per day)

Any ideas/suggestions?

Thank you.

More info: I ran the test memory Microsoft (in addition to above mentioned Memtest-86). Is it possible to have the RAM ok, but everything just does not work WITH my Toshiba laptop? In other words, is something special on the modules of memory supplied with the laptop (which I have not because I have improved the memory immediately when I bought the laptop). Thank you.

Another relevant info: I used the program "auditor" and this explains why I've been blue screens more often. I turn off, but I have still a few blue screens (not as often as before). The newest one: «...» "Stop 0x0000008E... win32k.sys..." "However, I rarely have the same error message

Tags: Toshiba

Similar Questions

  • BIOS password? (Satellite A50-111)

    Hello. I have a Satellite a50-111 with the bios to version 1.30. Everything works fine. I put a password (which I think is a BIOS password) Toshiba HWSetup and indeed, when I turn on the laptop, I wonder a password until the system starts.

    However, I tried to get into the BIOS (at Esc) and I managed to get in without having to type the password. But I thought that the whole point of this password is to protect the BIOS! I don't understand what the purpose of this password? Any ideas? Thank you.

    EDIT: Later, I realized that I can start the computer without the password only when I use the reboot. It works as it should when I stop/restart the laptop.
    I guess that I partially answered my own question... well that is not clear to me what happens in the following cases: the laptop is off; someone puts is a bootable CD with another operating system (such as Knoppix) and restart the laptop (not arrested...) without the need to use the BIOS pwd. Is it still possible?

    Post edited by: hpop

    Post edited by: hpop

    Hello

    you need to differ between the two paswords!

    There are the user and supervisor pw that are different.
    The IPL user protects the system to enter the operating system without pwto. Pw supervisor protects the BIOS!

    Normally the pw is requested after each new startup, restart too!

    Campino Bye

  • Satellite A50-111: I get an error: cannot install MBR disks

    I have a satellite A50-111. The system with the error would not start a system disk and tried to boot from the network.

    To get the pc working, I tried to reinstall Win XP Pro, but I get an error: cannot install MBR disks

    How to solve this?

    Jon

    Hello

    Have you tried to install the unit using the supplied restore CD?

  • Blue screen on my Satellite A100-599

    4 days while quiting a game (online), this blue screen appeared:
    ( http://img370.imageshack.us/img370/5672/img0001cy0.jpg)

    5 seconds more late to appear the screen computer has restarted.
    I searched some on this problem on the internet and think that there was a problem with the graphics card. Therefore, I tried to remove and re - install the driver (with driver on toshiba download page). However, the problem didn't end even it has been increased. After that, I formatted the computer but the problem is still ongoing. Here some information about the card:

    Track type: Geforce Go 7600
    DAC type: Integrated RAMDAC
    Channel of the card: GeForce 7600
    BIOS Information: Version 5.73.22.15.63

    and some information about the computer:

    Laptop: SATELLITE A100-599
    Model number: PSAARE-01W0257Z
    Operating system: Windows Vista editions Home Premium

    Please help me! What is this problem? How can I solve?

    Thank you...

    Hello

    have you checked if your RAM is good? I suggest do a RAM with 'memtest86' test or 'prime95' so you can be sure that your RAM or CPU is either defective or not.
    And it would be useful to do a bios update to the latest version, because it is sometimes useful.

    One last question: how many times did you get this error and how long your machine was fine until this error appeared the first time.
    Welcome them

  • Satellite A50-111 - HARD drive upgrade

    Hello!

    I need to upgrade hard drive of my laptop because it is very slow. However, I know it's a 60 GB to factory-installed 4200 RPM.
    I'm ready to be upgraded to a fast 7200 RPM, if possible, with a decent capacity, but I'm not sure of the supported hard drive type (IDE?, 2.5?) is a model of 5 years. In my view, there are incompatibilities with the laptops today, hard drive formats, so I really need help.
    Thank you very much for your help!

    These are the specs on the site
    http://EU.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new = Yes & PRODUCT_ID = 97598

    Hey Buddy,

    In my opinion the HARD drive upgrade will not increase performance well then you should try the other options first as reinstalling Windows, or upgrade the RAM.

    Anyway, Satellite A50 use IDE interface, so you can use hard disks of 120 GB of disk space.
    Of course, you can take a model at 7200 RPM, but they need more energy and produce more noise.
    I recommend a 120 GB 5400 RPM model. That s pretty fast!

  • Blue screen on my Satellite C660-1 MB

    Hello

    Please find the solution on my pc Satellite C660-1 MB. I suffer from bluescreen desplaying start-up. Several times I'm having this problem. While I do my work on that just it empty and restart with the blue screen. What happens to him. Is this one hardware or software or other problem?

    Your attention will be heighly appriciable.

    Sudip

    Posted by spkali123
    Is this one hardware or software or other problem?

    Without accurate information, we cannot say with certainty what the problem is. You can send us the error code? It helps to know what the problem is.

  • Blue screen (more of a gel to a blue screen) BCCode124

    For some time I get random freezes, sometimes when the games, sometimes on the desktop with nothing open, sometimes when not in the room. Each time however, I am not greeted with a BSOD, but after a reboot, I get the blue screen information.

    After doing quite a few search and replacing a hard drive, I'm now going to ask for help.

    BCCode: 124
    BCP1: 0000000000000000
    BCP2: FFFFFA8006B04748
    BCP3: 0000000000000000
    BCP4: 0000000000000000
    OS version: 6_1_7601
    Service Pack: 1_0
    Product: 768_1

    The operating system has been installed in 2010, and I got errors for almost a year now.

    List of equipment of change:

    New HARD drive

    New processor

    New Wifi dongle

    New GFX card

    The CPU is an ebay item and the graphics card was all new from Amazon. I started having problems shortly after their adaptation and they were the first hardware changes, I did.

    The hard drive has been changed as one of the 2 discs I was using at the time began to fail and threw blue screens. As it is no longer in the system I can exclude this one.

    I replaced the dongle wifi due to questionable wireless connectivity but it was down to the router that has also been replaced and works well again.

    System Specs:

    350W POWER supply (it's one of the possibilities of the blue screens, I think)

    CPU Q8200 is not overclocked

    6 GB DDR3 1600 mhz ram running at 1333 mhz

    ASUS P5E3 pro mobo (x 48 chipset)

    HARD drive is a WD black 1 TB

    1 GB gDDR5 Nvidia GTX750 (even if it isn't old, it's my other suspect)

    Win 7 SP1 Home premium 64-bit

    I used the GPU, CPU and RAM, software and all tests have run for hours without any error or omission.

    I have a couple other odd goings on too which could carry on blue screens.

    I play a racing game works perfectly on a clean boot. I put into hibernation every night (no sleep) and after a hibernation (not all the time) hosting edge of pings for only one game but other games constantly low pings. After a reboot it works fine again.

    Second strange thing, start another game works perfectly on a clean place and most of the time after hibernation, but sometimes short super slow (it is a child of 15 years not graphically intense game) and sometimes well running too fast.

    My thoughts here are the drivers do not work properly and can contribute to accidents. All of the opinions and suggestions are welcome. If you need more info, just ask. I work in tech support for a living and it's confusing to me. I reinstall normally, but after 6 years its amazing how much junk you accumulate.

    Thanks in advance

    It seems that the nvidia drivers cause the stop 0x7e error

    I would uninstall CPUZ, its files are 6-7 years

    This pcouffin.sys file is 10 years. It may belong to DVDfab. Update or uninstall. Old drivers can crash windows. Possible this file / program is causing an accident

    This SCDEmu.SYS file is 6 years old. PowerISO. Update or uninstall. It's up to 6.6

    It seems that daemontools has been installed? Since this c:\windows\system32\drivers\sptd.sys file is on the hard drive

    Download and then run this option to remove c:\windows\system32\drivers\sptd.sys

    It is possible daemontools or c:\windows\system32\drivers\sptd.sys is one cause of this stop error 0 x 124

  • Need drivers for Win7 for Satellite A50-111

    Hello!
    I'm looking for a driver for windows 7. I found the drivers for windows xp only.
    Could you help me?

    Satellite A50 is very old model of laptop and not supported for Win7, so you will not be able to find the drivers for Win7.

    I'm sorry.

  • Get a warning from the blue screen on my Satellite L300

    Lately, I've been making a warning of the blue screen on my system, and then it restarts automatically. I copied the info.
    Any help would be appreciated! I don't know what it all means. :))

    Product
    Windows

    Problem
    Stop unexpectedly

    Date
    25/10/2009 09:09

    Status
    Report sent

    Signature of the problem
    Problem event name: BlueScreen
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 3081

    Files helping to describe the problem (some files may be is no longer available)
    Mini102409 - 01.dmp
    SysData. XML
    Version.txt

    Additional information about the problem
    BCCode: 9f
    BCP1: 00000003
    BCP2: 84683030
    BCP3: 86AA6030
    BCP4: 85B 15008
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 768_1
    Information about the server: 46689d9f-cdf1-40e7-a52c-7380a7ec7727

    Try:

    (1) test the RAM. www.memtest.org (CD or Bootable floppy)
    (2) use a system restore to return to a previous state.

  • Touchpad problem - Satellite A50-111

    Hello. Last week, I bought my laptop and here I am with a problem of inportant.

    The touchpad does not work correctly. When I take the finger above the cursor jumps up and down even when the finger is motionless. (It's like the mouse cursor oscillates on its expected position). It is very difficult to click on anything whatsoever. I use an external USB mouse that works very well.

    I don't think that it is a driver/software problem. I use a linux live CD (Knoppix 3.7) distribution to check if the problem persists under linux. He does.

    Is there someone else with the same problem here? Don't you think that, given the information above, it is a hardware problem or would it be the drivers?

    Hello

    In my view, it cannot be driver issue, as all drivers are put to the test. It is very difficult to say what is a problem.

    You can check all the mouse settings including the advanced feature settings. Y at - there no any improvements you can contact the after-sales Service of Toshiba partner. Those are responsible for all material tests.

    If you need info on the Service partner you can find it on
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

    Good bye

  • Get a blue screen of death at seemingly random times. I can't find a model as to why he's going.

    Get a blue screen of death at seemingly random times.  I can't find a model as to why he's going.  I ran a dumpcheck on minidumps different blue screens more than 2 weeks.  I don't know what they tell me.  How to interpret?  can I publish the results of minidump here?

    Truly random errors Stop with various errors usually means a defective hardware.

    http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

    Let me start with the RAM.

    On tests of hardware failures often alleged swapping parts by parts checked. If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.
    MS - MVP - Elephant Boy computers - don't panic!

  • Blue screen @ iPhone 5s

    I get a blue screen more and more to my iPhone 5s, but I can't connect to an App or feature. I happens all the time randomly, even with the active screen lock.

    I have a lot of data from diagnosis to my iPhone including panic-... ResetCounter... + CoreTiime-... Is there a way to find the reason for the blue screens with the help of diagnostic data?

    To make sure that it is not software related, set it back to factory settings, without using any data backup later. Set up the rest of the personal settings manually and test the phone.

    If the phone works again, restore the last backup. If the problem returns, the data backup contains damaged data, causing your issues.

    If it still does not respond, it is a hardware problem and the phone must be repaired by Apple or an Apple authorized Service Provider:

    Use iTunes to restore your device to factory settings - Support Apple iOS

    Find an Apple authorized service provider

    Apple iPhone - contact Support - support

  • Satellite A50, I can't burn DVD

    Hi all
    I can't Format DVD?
    And I can't the DVD Burning?

    Note: I have the Toshiba satalite A50 model
    and it is having the writable DVD.

    Help me please... Thank you

    Hello

    What model you exactly (for example, I am very interested in Satellite A50-111). But anyway if your mobile is correctly installed since your recovery CD or DVD it should be no problem.

    Please check in Device Manager if there is some hardware problems with your DVD/CD drive. You have a DVD Super Multi drive and it is possible to burn them all.

    Have you installed a software burn? Have you tried to format the DVD - RW, DVD + RW and DVD - RAM?
    What are your tried exactly?

  • Impossible to install its und WLAN drivers on my Satellite A50

    Hello all;

    I bought a laptop Satellite A50-111... I formatted it but I can not install sound card and Wi - Fi connection. The drivers that are on the Toshiba internet download site can not find material and they do not work properly.

    Is anyone know something about this model? How can I do? Please emergency because I need urgently for laptop.

    Hello

    Can I ask what drivers did you tried to install?
    Drivers XP you speaking?

    Look, man that the Toshiba driver page presents some useful documents. First of all, you should take a look in the instruction of installation of Toshiba. This txt file describes the way in which, the drivers must be installed! Please follow the guidelines

    Second, you have noticed the information Microsoft Windows XP SP2 update on the page;
    According to this page some applications need to be updated after SP2 has been installed.

    Finally, and especially all the Microsoft QFEs on the page are needed and should get the operating system to work!

    Follow the instructions!

  • my computer told me to repair windows.and everytime I try I get a blue screen. It does not start in any mode without failure. I just get a blue screen. Thany you shane

    whenever I try to start my computer .a blue screen come often does not start in any of the modes security .He told me to repair windows recommended. can't do recovery or what he can be.wont start in safety mode.what can I do .thank you. Leonard.

    Hi leonardhurley,

    Since when are you facing this problem?

    You did changes before this problem occurs?

    What is the exact blue screen error message you received?

    Method 1

    I suggest that you perform the last good known Configuration

    http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

    Method 2: disable automatic reboot in order to collect the Blue error screen, so in case the blue screen just flashes and dries on.

    Method 3:

    I suggest you to follow the article below for the Blue error screen.

    http://support.Microsoft.com/kb/958233/en-us

Maybe you are looking for