Why my drive flash not detected?

Similar Questions

• HP v125w 2 GB drive flash not detected by windows

  My flash drive is not detected by windows what should I do

  I have a HP v125w 4 GB flash drive that works on Windows 2000 and 7.  However, I also have a disk 16 GB flash of v125w HP which works on Windows 7, but was not recognized by my system Windows 2000.  Here's what I did to get Windows 2000 to recognize (this may not work for everyone, but it did for me).

  I plugged the flash drive to 16 GB on a Windows 2000-based USB port and ran:

  Norton SystemWorks-> Norton Utilities-> find and correct problems->

  Norton Disk Doctor-> diagnosis

  that gave me the message:

  Insert the diskette to diagnose in the E: drive.

  So, I ejected the flash player, it plugged into the USB port and you click on diagnose again.

  Norton Disk Doctor consulted the flash drive, diagnosed and gave the following report:

  There is no problem detected on drive E:
  Partition table... Jump
  Structures of files... Ok
  Surface test... Jump

  After this, the flash player was working fine on my Windows 2000 and Windows 7 computers.

  Thus, this procedure is awakened somehow the reader as much as to be recognizable by Windows 2000.  I hope this helps you.

  Bob.

• CD drive does not detect in the EXSI vm servers

  Dear friends,
  We installed the server as virtual machine in the platform EXSI, CD player, but the server is not displayed. I tried almost all the options.
  Please help in this problem.

  The w player server is connecedt as a 'Customer' device and have "connected to power on" checked.

  We already install two server in this Exsi machine. Now when I created another virtual machine, CD does not work. And I checked also other server that also the CD does not work.

  If any server in this platform the CD drive does not detect. I think that some options in the EXSI platform that must change.

  Welcome to the community,

  the reason why physical disk is not detected could be a problem with the configuration server hardware, firmware on the CD-ROM drive...

  The easiest way to work around this problem is to use the ISO images and upload them to a new folder on a data store (for example ' ISO-Repository') using the browser of data store and then mount the ISO on the virtual CD drive. This installation of tracks also run a lot faster.

  André

• Re: Tecra 9100 - new HARD drive is not detected

  I have a Toshiba Harddisk provide a Tecra 9100. Checking the BIOS it shows "Enhanced IDE", but you are trying to boot from the disc does not work HARD. Even trying to install a new operating system present, that the HARD drive is not detected.
  From the laptop is also very long.
  Any idea?

  Your new HARD drive is larger than 120 GB? The HARD disk controller supports the 28-bit LBA and large drives as 120 GB will not be recognized by the BIOS.

  What you mean with Enhanced IDE? The BIOS recognizes the new HARD drive with model number?

• HARD drive is not detected in BIOS - need to recover data.

  What happened is that my laptolaptop takes a long time to start, so I slapped him. After that I kept getting the error message "no boot device, please restart". So whenever I restarted I kept getting this message. I also sometimes had "Media Fail" message. I pressed F2 at startup to get into the Bios. Settings so check I saw that hard disk still showed it's a Hitachi one.

  My hard drive was clicking to it so I searched online advice on what to do and I saw on the opening of the hard drive in a clean environment, ensuring that no dust went on the drive. I expect the head being stuck on disc, but it was not stuck. So basically, I put the lid on. Since then, the hard drive was not detected.

  Not in the Bios (he said no). I bought a CD to restart which can temporarily become Windows to the screen under Xp, so I can go to the computer to retrieve data from the hard drive. It shows nothing. There is always a clicking hard drive, more a ticking sound. It is always possible that an expert could remove the hard drive and recover my data that are valuable photos and videos.

  Thank you

  What model of laptop do you have?
  Try to set the BIOS to default settings and check if the HARD drive is recognized correctly.

• Equium A200 - CD/DVD drive is not detected

  I can't open any CD/DVD disc. The drive is not detected.
  When checked in the management system, he demonstrated, the drivers are missing or corrupted.

  How do I download the drivers? Or is there another solution?
  My model number is PSAF5E
  Serial number is YT144538Q
  And the CD/DVD device is POLE * DVD / RAM UJ-850 s ATA device

  Hello!

  T, you can download or reinstall the CD/DVD driver because it s a part of the OS (operating system).

  It would be interesting if the BIOS can detect the drive. Please check this box.

  It would also be interesting if you have an error as the #19 error message. This is known and a search around the forum.

  Good bye

• My cd/dvd drive is not detected.

  CDDVD DRIVE IS NOT DETECTED

  A driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32).

  Driver name: TSTTCORP CDDVDW TS-L633F

  Depending on the operating system, try following the steps under "Windows 7 or Windows Vista" or "Windows XP" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Second hard drive is not detected

  Hi, I bought an ssd to replace the hard drive of my acer e5 571g 50ns.
  Using a desktop computer, I transfer the os and oem SSD partiton.
  Because the laptop have a fake cd/dvd player I bought an adapter 2.5 ".
  So, I put the ssd sata port where before there was the hard drive and put the hard drive into the adapter port sata cd/dvd.
  When turning on pc the ssd is detected and it works perfectly, but the old hard drive is not detected. He is not shown in Device Manager

  As the garancy struck down, using my campus license, I installed windows 10 removal of the oem partitions.

  Now my acer works perfectly with ssd and hdd.

• My cd Tower driver does not detect a particular cd alone... it detects all the other CD

  Hello my laptop driver has not detected a particular cd alone... it detects all other CD... How to get rid of this problem

  You probably can't fix it.  It's probably a damaged CD unreadable.

• Flash drive is not detected

  Original title: Flash drive problem

  I got my player wiped clean flash caused by a virus. Now, when I insert the disc nothing happens. I am not very informed when it comes to these things, but I thought that my data would be entered on the drive again, just like the first time around. Made null and void by car when I had the deleted info?

  I have a laptop Compaq Presario with Windows Vista Premium. Also, I just had the motherboard replaced, but I don't think it would have something to do with it. I appreciate your help!

  Thank you
  Elda

  Hi Elda,

  Thanks for posting the question in the Microsoft Community!

  The USB is not detected.

  1 have you tried in different ports?

  2 are you able to use other devices USB?

  I suggest you follow the steps:

  Method 1: Run the fixit

   

  See the site:

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Then, as all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the steps:

   

  a. click Startand then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click on to expand Bus USB controllers, right click on the controller host, click on uninstall and click OK.

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  d. repeat the substep c to uninstall all items under Bus USB controllers.

  Now, restart the computer, and all USB controllers will be installed automatically.

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• HP envy j110tx: my flash drive does not detect in the hp j110tx start menu

  When I m trying to install windows usb 8.1, my USB is not detecting in my laptop boot menu like j110tx.

  But detects the USB even in my pc another and it contains the bootable file and it is lodable too

  I've looked everywhere but I have nothing, so please help me

  Hello:

  You have created Windows 8 or 8.1 Installation USB Flash Drive with UEFI?
  http://www.eightforums.com/tutorials/2328-UEFI-Unified-Extensible-Firmware-Interface-install-Windows-8-a.html

  http://www.eightforums.com/tutorials/15458-UEFI-bootable-USB-flash-drive-create-Windows.html

  Concerning

  Visruth

• HP USB Flash Drive v155w not detected by my laptop

  Hello

  Help, please.

  I bought a HP USB Flash Drive (16GB) v155w but now it is not detected by my laptop. Dell XPS M140. It runs on OS WINDOWS XP (Media Center). can you suggest a way out.

  Thank you.

  Also, I have same problem and discovered that I inserted the USB key wrongly, just try to insert it by reversing the trend which solve the problem in my case.

• HARD drive does not detect the Tecra R940-1JG

  Hello

  I had double partition on the HDD for win7 pro and Win 10, but after update Win 10 that he was unable to start.

  I disconnected the drive and connected to my office and managed to recover the data.
  It works find in desktop, but it does not detect my Toshiba Tecra.

  I had an another 120 GB and tested in my Toshiba laptop and it works and detects ok.

  I change the settings of UEFI and AHCI but no joy.

  HARD drive is seen by BIOS?
  HARD drive appears on the first page of the BIOS?

• P30: External hard drive is not detected when you use IEEE 1394 cable

  My P30 not / can not detect my newly acquired Western informed extreme Digitak Drive 320 when I connect via the firewire port. I use a 4-pin cable (which costs a fortune, by the way) who is supposed to be a way to connect this drive to a 6-pin pc.

  My ieee 1394 driver seems to be called 'VIA OHCI Compliant IEEE 1394 host controller".

  Can someone tell me what to do? I really need to connect the FireWire drive because I need the USBs for other devices.

  Thank you!

  Hi, Lars

  It is really strange. I use the external DVD drive (DL) using the same cable. I tested it with several units (old Satellite 1900, Tecra M1 and also new Qosmio G20) and everything works perfectly.

  Check the power supply to the external HARD drive.

• Why my Satellite does not detect a new module of memory?

  Hello

  Today, I installed a new memory module SDRAM 128 MB in my Satellite 1670. It is not a real module but on the package is the right code: PA3005U.
  After that I turned on the computer, it is not detected then I use still 32 MB of RAM.
  How can I solve this problem?

  Steef

  Hello

  The fact is that you use the right memory module. It is not easy to say why the new module is not recognized correctly. The slot is maybe defective. Try to remove 32 MB module and use any other location 1. (Unfortunately I put t know if this device has two or one single location for memory expansion).