Why my jQuery scripts are not running in my models?

Similar Questions

• Why this message: you are not allowed to view or update this topic

  Why this message: you are not allowed to publish or comment on it.

  It's a legitimate question.

  You encounter a bug in the Jive Software that runs this forum. Most of the time simply try again or refresh the page will fix the problem. There is one caveat with respect to time. You can't post more than once every 30 seconds, and it's to discourage spamming.

• Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate

  Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate. EU tested ps and I was told it was OK. Disconnected from the motherboard except course before directed ps button and the cpu fan has become much brighter, but that's all that happened. Any suggestions on what to check? Checked with VOM push and he seemed to agree. Replaced the MB with the new Board of Directors, that didn't work either. Don't know if it was any good, it was a store Bulletin Board.

  All the indicators you mention leads to the PSU, not the Board of Directors.

• You are not running on a supported operating system. Please see Microsoft Virtual PC help for a list of supported host operating systems.

  You are not running on a supported operating system. Please see Microsoft Virtual PC help for a list of supported host operating systems.

  Crystall ball says you are trying to install a version of Virtual PC on some versions of windows and your PC apparently does not meet the system requirements
  http://www.Microsoft.com/Windows/Virtual-PC/support/Virtual-PC-2007.aspx

• How to find vCenter virtual cluster large when the services are not running?

  Does anyone have advice for locating vCenter in a cluster, when his services are not running?

  For example, I have to restart vCenter and its network is having issues.  I need to go to the host ESX (i) is on and open the console to get to the virtual machine.  But to find that host is on can sometimes take a long time, because I have to log in to each HOST and see if it is the host where vCenter.

  Does anyone have any advice or suggestions to make this process easier?  It is not so important, but just curious to know what others might suggest.

  Thank you.

  I used PowerCLI and

  to connect-viserver esx1, esx2, esx3

  connect to all the ESX(I) hosts and then run

  Get - vm vCenterServerName | Select the name, the host

• Help - why the songs that are not on my iPhone appearing in my list of app music albums/songs?

  I have over 500 GB of music on my Mac, so I create a playlist for the songs I want to sync my iPhone. Yet when I look at my phone, there are many songs that are not in sync would be playlist. They cannot be read unless the phone is connected to my wifi at home, but I don't want them cluttering up my phone and makes it almost impossible to find the tracks I want to listen to.

  I hate the new music app. For the first time since I converted to Apple 10 years ago, I wonder if I can be forced away because it's so horrible. Why ruin a great product with terrible software? Anyway, if anyone can help me to fix this serious bug, I would be very grateful.

  If you go to the library of the screen and press the red text just below the icons of the album/playlist (where you select whether you want the screen to show the view of the artist/Album/songs downstairs there is a toggle to only show that downloaded music.) If you enable this, then only the songs that are actually ON your iPhone will be in BLACK characters. The rest of your music library to iCloud either won't display at all or be grey. Now - if you have a few streaming, you can see more songs, because the songs that are heard are cached in the memory of the iPhone box and supposedly deleted automatically when it fills up (but not user accessible unless you use some third-party programs).

  What you can do - so they need WiFi or data cell-, it's make a playlist in iTunes that you want on your iPhone. Then (assuming that Apple music and iCloud music library are running on both), you can go to the playlist and press the small cloud/down arrow icon and download these tracks on your iPhone. Then, you can play these songs without access to wifi or cell phone.

• Assigned to the user of the script is not running

  Hello

  I have a problem with running scripts assigned to Quest Console (7.6). In resources/Scripts, I have 2 scripts (a VBS and other CMD). The scripts are located on a UNC resource that is accessible by all users. Script executed manually works perfectly. But not automatically runs in desktop computers running with Windows 7 SP1 VDI.

  Any ideas?

  Hi Carlos,

  I saw a similar problem before, in my case the script run perfectly when I run manually but not happen the result when running via a GPO.

  I did some research and learned that it could be caused by settings on the system UAC, you test the policy. With active UAC will be running all scripts that are run from a policy, but in a different security context of the user. When this OPTION is enabled, logon session/logoff scripts are executed by an administrative user, the office can load it later as the user.

  A suggestion to solve the problem was first to apply this registry setting:

  HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\

  EnableLinkedConnections = (dword) 1

  Scripts Google UAC and logon and you will find more information and proposed solutions.

  I hope this helps

  David

• Why the proxy settings are not respected

  I set up SSH as a proxy server on my laptop when I'm on a public network and configure Firefox to use the proxy by completing the manual Proxy config.

  If SSH doesn't work, I get this error message as expected: "the proxy server refuses connections" when I try to access any website EXCEPT Google.

  Searches on Google and access Google.com still works, even when the proxy server is not up. That seems broken.

  When the proxy server IS up, Google searches do not appear to use it.

  Google is my default search provider. If I try to access Bing, Firefox is behaving as expected (no access when proxy is out, throw up debugging indicating new connections when the proxy is up). If I change from Bing to be default search provider, the behavior of the two remains the same (proxy will use Bing, Google does not work).

  Why access to Google (and only Google?) ignore the proxy settings? Are there other sites of 'magic' that would also ignore the proxy? I use the proxy because I want to protect my internet traffic when I'm on public networks, if Firefox can randomly ignore them for some sites but not others, how can I trust him?

  My configuration problem. I realized that any site that uses https worked, while others are not.

  Somehow the "use this proxy server for all protocols" got unchecked. Audit, it solves the problem.

• Why the acquired data are not from min to max (DAQmxCreateAIVoltageChan, PXI-4472) values

  Hello

  I'm developing a program for the PXI-4472 acquisition on opensuse 11.4 device (linux 2.6.34).

  I try to acquire analog data and to read in a wav file.

  Configure the task of acquisition with the following functions:

  DAQmxCreateAIVoltageChan(taskHandle,"Dev1/ai0","OnboardClock",DAQmx_Val_Cfg_Default,-10.0f,10.0f,DAQmx_Val_Volts,NULL);
  DAQmxCfgSampClkTiming(taskHandle,"",48000,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,48000);

  DAQmxDisableStartTrig (taskHandle);

  I don't understand why the data stored in the wav file are not-10V,-10V but-5V, 5V... (the value of the gain is 0dB). (Perhaps a scale of 0.5?...)

  Thanks for your help,

  Amandine

  You're right, in my example, I considered as unsigned data.

  Concerning

• "Why the 2 screws are not same speed?

  HI comrades LabVIEW in love.

  Could someone let me know why the 2 screws attached do not run at the same speed I expect?

  Thanks in advance.

  Bryan

  Inside the event, value is only designed for the value of signalling events on the time-out, i.e. every 100 ms.

  Outside of the event is happening at the same time, so he writes to each iteration of the loop, and the timeout never occurs.

• A scheduled script does not run correctly

  I have a .vbs script that I want to run every day. The script must be running a 3rd party application that will back up a SQL Server Express database to a flat file of data archiving and restore if necessary. If I click on the script, that it works perfectly, but if I set the script part it works; the part where it creates the backup directory, but I can't get the actual backup to occur.

  I went back to the software company. They said that if the script works by double click, it must be a windows problem.

  I use this on SBS 2008 SP2, which is X 64. I have SQL Server Express 2005 and 2008 on the server. What troubleshooting can I do. I'm a little weak on vbs programming so I have nothing pre programmed to write in Event Viewer. I also had a colleague change the script runs in PowerShell, but I encounter the same problem there.

  Hello

  The question that you are running in suitable for the forum on the link below:

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

  It will be useful.

• Why this two queries are not same

  Hi all
  
  Can you please explain this fundamental thing. Why this two queries are different. (10.2.0.3 Solaris Sparc 64)
  

  create table x1(a1 varchar2(10),a2 number, a3 varchar2(10));
  create table x2(b1 varchar2(10),b2 number, b3 varchar2(10));
  insert into x1 values('X101',1,'XX1');
  insert into x1 values('X101',1,'XX1');
  insert into x1 values('X102',1,'XX2');
  insert into x1 values('X103',2,'XX3');
  insert into x1 values('X104',2,'XX4');
  insert into x1 values('X105',3,'XX5');
  commit;
  
  insert into x2 values('X101',1,'X21');
  insert into x2 values('X101',1,'X21');
  insert into x2 values('X102',1,'X22');
  insert into x2 values('X103',2,'X23');
  insert into x2 values('X104',2,'X24');
  commit;
  
  WITH xx AS (select b1,b2 from x2 where b1 IS NULL)
   select x1.* from x1 ,  xx
    where x1.a1 = xx.b1(+) and  x1.a2 = xx.b2(+) ;
   
  A1                 A2 A3
  ---------- ---------- ----------
  X105                3 XX5
  X104                2 XX4
  X102                1 XX2
  X103                2 XX3
  X101                1 XX1
  X101                1 XX1
   
  6 rows selected
   
  select x1.* from x1, x2 where x1.a1 = x2.b1(+)
      and x1.a2 = x2.b2(+)  and x2.b1 IS NULL;
   
  A1                 A2 A3
  ---------- ---------- ----------
  X105                3 XX5
   
  select b1,b2 from x2 where b1 IS NULL;
   
  B1                 B2
  ---------- ----------
   

  Thank you!
  NA not (sentence of) think of this.
  + (it's one of those things that I really need of don't forget do not forget ;)) +)

  hoek&XE> select x1.*
    2  from   x1
    3  where not exists ( select null
    4                     from   x2
    5                     where  x1.a1 = x2.b1
    6                     and    x1.a2 = x2.b2
    7                    );
  
  A1                 A2 A3
  ---------- ---------- ----------
  X105                3 XX5
  
  1 rij is geselecteerd.
  
  Uitvoeringspan
  ----------------------------------------------------------
  Plan hash value: 816925353
  
  ---------------------------------------------------------------------------
  | Id  | Operation          | Name | Rows  | Bytes | Cost (%CPU)| Time     |
  ---------------------------------------------------------------------------
  |   0 | SELECT STATEMENT   |      |     5 |   100 |     5  (20)| 00:00:01 |
  |*  1 |  HASH JOIN ANTI    |      |     5 |   100 |     5  (20)| 00:00:01 |
  |   2 |   TABLE ACCESS FULL| X1   |     6 |    72 |     2   (0)| 00:00:01 |
  |   3 |   TABLE ACCESS FULL| X2   |     5 |    40 |     2   (0)| 00:00:01 |
  ---------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     1 - access("X1"."A1"="X2"."B1" AND "X1"."A2"="X2"."B2")
  
  Statistics
  ----------------------------------------------------------
            1  recursive calls
            0  db block gets
            6  consistent gets
            0  physical reads
            0  redo size
          518  bytes sent via SQL*Net to client
          384  bytes received via SQL*Net from client
            2  SQL*Net roundtrips to/from client
            0  sorts (memory)
            0  sorts (disk)
            1  rows processed
  

• Applications are not running correctly

  I installed the iOS Update 9 and therefore count my applications do not run the way they were accustomed to, something fishy is going on in the back end, I guess. If anyone has an idea about this then please let me know. I need your help

  Hi Shayadri!

  I understand that your applications do not work properly after installing iOS 9.  I understand how important it is to have your apps working correctly, and I am pleased to offer you some advice.  Please try all the tips in this article to support, and if you're still having problems with third-party applications, you will see instructions to contact the developer of the application of aid.

  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Thank you for using communities of Apple Support.

  See you soon!

• Some of my applications are not run at all (first and aftermath).  Photoshop and Illustrator open fine but the other 2 don't even give me any indication of an error.  Only, he lies and does nothing.

  Ive tried reinstalling them but they do not always work

  You MUST have a 64-bit computer and operating system... What is your computer?

  -Programs are supposed TO not view or download if they are not installed on your computer

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

• Image links are not updated in the model

  If I create a template page, not all the image links are updated, more precisely, mouse over event links are not updated. Is there something I need to change to get these links to change the model? I use Dreamweaver CS6

  You used behavior of image for DW swap on these mouseovers, links would be updated.  Your manual approach is causing DW miss those links when it updates the pages.