Why my laptop keep going to workoffline
When I go to yahoo or any other website my laptop will work offline, why is this?
Hi richardfarlow,
· You use Internet Explorer?
· If so, which version is installed?
· Change to work offline by itself?
You can try the following if you are using Internet Explorer.
Method 1: Check the following.
a. open Internet Explorer.
b. press Alt on the keyboard and select the file in the menu bar.
c. click work offline to disable the option.
Note If this option is enabled, a check mark appears next to work offline.
Method 2: Reset the Internet Explorer settings.
How to reset Internet Explorer settings
Tags: Windows
Similar Questions
-
my laptop keeps going to the start page. No matter which option I choose, IE. safe mode, safe mood with networking, safe mode with command prompt, last known, good configuration start windows normally, it always comes back to the same screen. saw this post before and the invloved boot cd solution. I have not a cd ROM is there another way to solve this problem. Thank you people
Thank you for taking the time to make this post very informative, excellent. Without the machine test myself that I can't be sure, but based on the age of the computer and what you wrote I suspect for lack of material. It could be something simple like the hard drive or RAM or something more serious like the motherboard. I wouldn't recommend replacing any material on such an old laptop.
As long as the hard disk has been physically, you can recover your data easily. If the hard drive has failed, then you will need to send the drive to a professional drive savers data recovery company. It is quite expensive ($500-3700), but they can usually recover your data. Some insurance policies cover also, professional data recovery in order to check with yours. But let's be optimistic. ;-)
IMPORTANT - If there is no question that the drive is at fault - there are noises, for example - and the data is crucial NOTHING else ON THE DISC. Whenever launch you this player you can destroy data. If this is the case, send the drive to a professional data recovery company.
I'll give you the information on how to test the hard drive to see if it's good physically and how to recover data when you can't in Windows but in doing these things requires a certain level of computer skills. You know yourself the best and that it would be better to take the laptop to a competent local professional. If you do this, do not use a type of BigComputerStore/GeekSquad of the place. Get recommendations from family, friends and colleagues.
A. test equipment
Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)Boot with the CD that you have done and do a full test of the reader. You will probably need to change the boot order. Your Dell can give you a temporary boot menu if you press F12 as the computer starts. If so, use your arrow key to select the CD drive. Otherwise, press F2 to enter in Setup (BIOS) and change the order of boot on the CD drive first. If the disk fails all physical tests, it must be replaced. Although readers of the laptop cost around $60, you should really consider if it is to put money in such an old machine. You can replace the disk, but the laptop is definitely at the end of its normal life and something else is doomed to failure.
There is information about the RAM test and other materials here:
http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
B. retrieve data detach a healthy disk when you are unable to Windows
1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd.2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:
You will need a computer with two cd records, which is an engraver of CD/DVD OR a USB stick with a capacity to hold your data OR an external USB hard disk formatted FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.
* My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.
http://www.Knoppix.NET
http://www.nu2.nu/pebuilder/ - Bart PE BuilderC. recovery of activity for the future - http://www.elephantboycomputers.com/page2.html#Backing_Up MS - MVP - Elephant Boy computers - Don ' t Panic!
-
my laptop keeps going mode hibernation for no reason
my laptop keeps going mode hibernation for no reason
Hi Alanbyrne1982,
Welcome and thank you for viewing on the Microsoft Answers community forum.
It seems that the Hibernate your computer option is turned on. To resolve this problem, I recommend you to follow the steps mentioned in the link mentioned to turn off the hibernation below feature.
How to disable and re-enable hibernation on a computer that is running Windows Vista:
http://support.Microsoft.com/kb/920730
In addition, mentioned below are instructions to change power options where the computer goes to sleep instead of hibernation.
http://windowshelp.microsoft.com/Windows/en-US/Help/495c2226-19f1-49eb-9fd8-6dd7f2c0b49e1033.mspx.
Please try these and keep us updated on the status.
Take care.
Kind regards
Cedric M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Why my laptop keep turning back on/off?
I have a laptop and I have taken the battery as I have it plugged in all the time, but I then noticed when I turn off (yes I'm clicking the button of the SHUT DOWN tag) will be fixed it is back on itself.
Can someone help me with SIMPLE STEP by STEP instructions. My laptop is Toshiba and I am on Vista.
Thank you
What cell phone do you have?
Tell us the model number on the Base. PSMxxx-xxxxx
-
Why my laptop keep it close itself every half an hour or two?
my laptop for some reason any guard to stop itself every half an hour or so, any advice will be appreciated.
thnks.Hello Ryankahlon,
Is the laptop to stop or restart?
If it restarts, then this could be an indication that we receive a blue screen and the machine is restarted before you can actually see.
If this is the case, we must do the following:
- Zipper upward the contents of the C:\windows\minidumps folder.
- Send the zip file in a public folder on http://skydrive.live.com.
- Post the link on this thread so that we can look at landfills.
If the machine is simply stop, then this could be a hardware problem. We could also have a scheduled task updates to run every half hour which stops the machine.
Let us know if it is restart or stop and go from there, we will go.
Best regards
Matthew_Ha
-
Why my clock keep going back to the military times
Why my computer time change to military time?
Hi kathycantu,
Method 1
I suggest you to check the regional language settings and set the region to the United States.Apply regional and language settings to reserved accounts
http://Windows.Microsoft.com/en-in/Windows7/apply-regional-and-language-settings-to-reserved-accountsMethod 2
I suggest you to run the Microsoft safety scanner to see if all bytes of malware are the origin of the problem. The following link will help you launch the Microsoft safety scanner.http://www.Microsoft.com/security/scanner/
Method 3
If the steps above fail, I suggest you perform the clean boot to see if any third-party programs are causing the problem. The following link will help you perform the clean boot.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note:
follow step 7 of section of boot KB929135 to the computer in normal mode. -
Why my laptop keeps closed down without notice?
Every time when I use my computer laptop just close automatic. But before closing it down hear some loud sounds then just closed. What can repair? Is a hardware or software problem? Thank you and please help...
Hello
Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
It is just like it loses power or stop it in the normal way?For a laptop on everything that you can do is reinstall the memory and clean the vents (try adding a)
small fan as a test).This sounds like material so if the above does not help you then probably need help
a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
Support of system Maker.===========================================================
Check with these utilities to see if information may be collected: run BlueScreenView
to see if there were any BlueScreens and verify in MyEventViewer at shutdown
(or a few seconds before) See the event log contains useful information.It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
or time of the BSOD or event to provide more information about the possible cause - see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it a bit before and after the time of the event or BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
application of all accidents occurred in your system. The information breaks down is extracted from the
.WER files created by the Windows Error Reporting (WER) of the operating system component of each
time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.html------------------------------
Also do this so you can see the probable bluescreens. (You may or may not be able to see
them if they occur even after doing this according to the cause.)Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html============================================================================
Using start-up in minimal mode and other methods in this resolution of general performance issues might help.
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
.
-
Why my laptop keep closing?
My laptop shutsdown without notice, he starts to moan and then she just stops.
Hello
If it is a noticeable groan then its hardware almost certainly and you need technical support
in a good computer store (not of leeks and glances at a BestBuy or other big box stores) or the
Support of the machine system.=====================================
If you want to try it troubleshoot for causes of software:
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.Windows Vista restarts automatically if your computer encounters an error that causes
It crashing.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, drivers particularly video drivers but it
are other causes.You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Why my laptop keep telling me that your version of windows I use does not pass validation?
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 50
Code of Validation caching online: 0xc004c4a2
Windows product key: *-* - TBWHB - 6PCBW-X6QB6
Windows product key hash: 5iIkQPetoZ7LJzd5EMWBqCCyK4o =
Windows product ID: 00426-383-4067022-06647
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {290D8B7E-FA7F-4D60-A512-45E5049CA1A1} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Ultimate
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.150525 - 0603
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{290D8B7E-FA7F-4D60-A512-45E5049CA1A1} 1.9.0027.0 6.1.7601.2.00010100.1.0.001 x 64 *-*-*-*-X6QB6 00426-383-4067022-06647 5 S-1-5-21-398694444-2517232359-1409031196 ASUSTeK COMPUTER INC. K45VM American Megatrends Inc.. 223 20120926000000.000000 + 00036DE3D07018400FE 4809 0409 Malay Peninsula Standard Time(GMT+08:00) 0 3 _ASUS_ portable 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Ultimate edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: c619d61c-c2f2-40c3-ab3f-c5924314b0f3
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00212-383-406702-00-2052-7601.0000-2072015
Installation ID: 104224147451911192591313048746365732291285092251177745
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: X6QB6
License status: Notification
Reason for the notification: 0xC004F200 (non-genuine).
Remaining Windows rearm count: 1
Trust time: 26/07/2015-22:12:27Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004C4A2
Beyond: 0 x 0000000000000000
Event timestamp: 7:26:2015 21:55
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current Hash HWID: LgAAAAEAAQABAAIAAAABAAAAAgABAAEAln12XTxIGJUmAKIjtOIIMF6F2ouWYw ==Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC _ASUS_ Notebook
FACP _ASUS_ Notebook
HPET _ASUS_ Notebook
MCFG portable _ASUS_
FPDT _ASUS_ Notebook
SSDT TrmRef PtidDevc
SSDT TrmRef PtidDevc
SSDT TrmRef PtidDevc
SSDT TrmRef PtidDevc
ADELINE _ASUS_ Notebook
SSDT TrmRef PtidDevc
SSDT TrmRef PtidDevc
SLIC _ASUS_ NotebookAny help is appreciated above all.
Have you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Wireless connection keeps going to "limited connectivity".
I use Windows Vista and my laptop keeps going into "limited connectivity" and can only be fixed by restarting the laptop. I tried to disable TCP/IPv6, but only helped for a while and has never really solved the problem completely. Now, he's going to more frequent and it happens several times a day. I also turned off all power save features that allow the computer to turn off the devices. Please help me because this is getting more and more frustrating.
Hello
Follow these steps:
Control Panel - device - networks - WiFi - Manager write down of the brand and model, and then double-click
on the drivers Tab - get the version number. Then double click on update drivers (this can do nothing
that MS is far behind the drivers of certification). Then make a right click on the device and UNINSTALL - REBOOT - it
will update the driver stack.Now, go to the system manufacturer and search for updated drivers, this will be your fallback. Then go to the Site of the manufacturer of the device
and look for the even more recent drivers.Download - SAVE - go to where you put the driver - CLICK RIGHT to it - RUN AS ADMIN
(repeat on the site of the manufacturer of the device)Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlI would also turn off AutoUpdate for drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------
Also:
Connect as long as administrator - Start - type in the search box - COMMAND - find on the list above - CLICK RIGHT - RUN AS ADMIN
type or copy and paste to the command prompt and press on enter after each
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
Reset
That refreshes your IP stack
Rob - bicycle - Mark Twain said it is good.
-
My security firewall keeps goes off. I don't know why, it is not in all programs
I get a security warning that my firewall security is disabled.
* original title - my security firewall keeps goes off. I don't know why. It is not listed in my Programs.com* all
Hello ChristieEvans,
You are referring to the Windows Firewall or you use a third-party software? I have included a link below that I hope will help to ask a question.
Microsoft KB:
http://support.Microsoft.com/kb/555375
Thank you
-
"Why should I keep my keys for a second for my keyboard display what i type.
Hello
Check the following points.
From the windows control panel, open the ease of access Center and click on the link "make the keyboard easier to use. If there is a check mark in the box beside 'Turn Sticky Keys' or ' turn on Filter Keys, Remove these and then click on apply to apply the change to see if that solves the problem.
Kind regards
DP - K
-
wanted m6 sleekbook: How can I stop my laptop screen goes blank.
My laptop screen keeps going blank. and sometimes I'm in the middle of something. the laptop keeps runing like nothing happened.
Hello @Iggy6,
It seems that you have a unwanted material. You can contact HP telephone Support, for additional options. Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.htmlI hope this helps.
Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. In addition, by clicking on the Thumbs up below is a great way to say thank you!
Kind regards!
-
OfficeJet 4620: printer keeps going offline
OfficeJet 4620 - printer keeps going offline. If I turn it on and turn it on, it's online for a while, but it disconnects again. My IPad can't print on it. My Windows laptop, 10 shows as offline. I can open his web page by entering the IP address in a browser and can ping it, but it also shows offline. It is very annoying to have to reset the printer whenever I want to print to it wireless. Is this to say that the wireless antenna is going wrong? Should I buy a new printer?
I found what caused my problem when troubleshooting the installation of a new printer. I have 2 range Extenders. They had the same ssid as my router. One of the reports of tests of the new printer had a warning about it. I changed the range extenders in order to have all 3 different SSID. Now when the ipad & printer are that both connected using the ssid for the range extender in the room with the printer, there is no problem of ipad impression. My old printer is fine.
-
Why should I keep the click mouse to keep typing continue offshore assistance
Keep going off will not be on when you type, have to keep clicking the mouse
Hi Tweetysweet2,
1. What do you mean when you say ' keep the click mouse to keep typing "? Is it the cursor jumps around on the page when you type?
2. using a laptop or desktop?
3. this happens with all programs?
4. have you made a recent software or hardware changes to the system?
Method 1:
If the cursor jumps constantly as you type, then make sure that the mouse pointer is set to hide when you type. Here are the steps:
a. click Start, click Control Panel, click Printers and other devicesand then click mouse.
b. on the Pointer Options tab, under visibility, select the Hide pointer while typing check box.
For more information, see the article:
Method 2:
You can refer to the computer or the device manufacturer's Web site and try to install the latest version of the drivers for the Mouse/touchpad:
For more information, see the article:
How to manage devices in Windows XP
Method 3:
If the problem persists, try to perform a clean boot, and then check if it helps.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to configure Windows XP to start in a "clean boot" State
Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.
Maybe you are looking for
-
I took some pictures on my iPhone on Saturday and when I went to watch later there were three photos (attached image, three on Saturday) that were not my own? How can this happen?
-
Qosmio F30 - 112L where wonder which part of the image?
Hello I want to help.Recently I installed Windows 7 on my Qosmio F30-112, which has WinXP.I have backed up my files before installing windows.7 unfortunately, I have only my files instead of programs. So my problem is now where I can get a few progra
-
I'm reasonably sure that all C series in a cRIO modules should be able to input/output simultaneous however, I want to confirm this and there are several models that not explicitly said in their data sheets. These models are the NI 9213 Thermocouple
-
why I can not activate my adobe flash player?
I tried to see the photos on the gallery site and advised, I need Adobe flash player I. checked the adobe flash player could not activate. clicking on more information and got the new updates list interest me. tried a little while get my flash drive
-
Hi all How answering a call to auto or end a call? Thanks in advance