Why my program crashes on Agilent E8361A NWA?

Similar Questions

• My programs crash/hang up when I print something. Why?

  HP C7280 all-in-one Phot-Oneosmart
  Model name CN246B

  Operating system: Windows 7 64-bit

  Test page prints OK Control Panel of configuration/Printers

  BUT

  My programs crash when I print something.

  Program is suspended when something sent to 'print '.

  and message (program not reponding) appears.

  This applies to Google Chrome, Word .doc files and Micrsoft Office 2010 wth .jpg files NitroPro 8 with .pdf files.

  I removed it and added, printer - and verified with the Test Page OK.

  I have recently, after the problem started (he worked until two weeks ago), installed a new Version of NitroPro (Version 8). The hope that it worked at least but same problem.

  Maybe something to do with the settings in Windows?

  Are you connected USB or wireless?

  If you USB, check if you have the USB cable plugged into a USB 2.0 port and not the 3.0.

• Error message: Windows Movie Maker program crashes when scanning film auto

  When I try to create an automatic video, film imports, but to the point at which the film is created, the program crashes, Windows looking for a solution, the program opens again and I get a message that a problem that caused Windows to stop working. Note: Windows does not crash; the movie maker does. Then the suggested solution is to download updates for Windows, but there is no update needed.

  The entire message is:

  Product

  Windows Movie Maker

  Problem

  Stopped working

  Date

  25/09/2010 10:43

  Status

  Solution available

  Signature of the problem

  Additional information about the problem

   

  Help!

  Bucket ID: 2037677096

  Problem event name: APPCRASH

  Application name: MOVIEMK.exe

  Application version: 6.0.6001.18494

  Application timestamp: 4c1a43fb

  Fault Module name: FlipDSVideoDecoder.ax

  Fault Module Version: 1.0.0.0

  Timestamp of Module error: 4c78442b

  Exception code: c0000005

  Exception offset: 00008f46

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 1033

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Well, I was very happy when the program doesn't stop after following your advice and unchecking above named filter. But then, after it scans the file (which is a progress!), he says he cannot continue because one or more of the files contains a codec that is not supported by AutoMovie. I don't even know what a codec IS. I know who was Kojak, and I know what is Kotex, but what the heck is a codec and how do I get one?

  Thank you!

  ==================================
  Maybe the following article offers some ideas:

  "What exactly is"Codec"and why would I ever need it?
  http://netforbeginners.about.com/od/multimedia/f/codec.htm

  It is difficult to know what codec, you may need to because it
  is based on the format of your source files. And it is possible
  You may have some compatibility issues with one or more
  source files.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  It may be interesting to try to download and install a codec pack...

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  * Proceed at your own risk *.

  K - Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/ (the name of the file that you download is:)
  "K Lite_Codec_Pack_640_Full.exe")

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I have a mac and lightroom 3.6.  Never had trouble importing photos before. I tried today to import from memory card and my computer and the icon twice 'pending' appears and the program crashes. I have to force quit out of lightroom. It is o

  I have a mac and lightroom 3.6. I have never had bad to import photos before.  Today, whenever I try to import photos from a memory card or my computer, the icon "on hold" is displayed and the program crashes.  Only way out is to force the resignations of lightroom.  How can I fix this and why this is happening?

  Only, I solved the problem... My mac has updated the day before to a version that is not compatible with my old version of lightroom.  Only way to solve this situation is to buy the upgrade.

  Thank you very much!

• When I try to connect to 10 first the program crashes and I can't go further

  Why doesn't Adobe ID & password let me not in my first 10?  I put the code and the PW in and the program crashes.

  fredricc

  We need more detail on this.

  There is no more Sign In for first items 10 and earlier versions. There is no long - photoshop.com has been abandoned.

  You install the program, and when you open it, you continue in the areas of work, without taking into account any message nag on photoshop.com, which no longer exists in 10 and earlier versions.

  What operating system you are using and what video graphics card using this computer? This is another important issue regarding the first Elements 10.

  Please review, detail, and then we can decide what needs to be done to advance you in your first items 10 projects.

  Thank you.

  RTA

• Anyone else having programs crash after installation of Sierra?

  I just installed Sierra on an iMac mid-2012. A lot of programs crash after installing Sierra, of Apple's native applications. Anyone else having similar problems? All possible solutions?

  Thank you

  Hi guitarno,

  Thanks for the upgrade of your iMac to macOS Sierra! I understand that your Mac works more slowly as it did before the upgrade. You can try to start up your Mac in Mode without failure.
  

  What is safe mode?

  Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening. From your Mac in safe mode does the following:
  Check your startup disk and attempts to fix problems if necessary directory
  Loads needed kernel extensions only
  Prevents elements start and the login items open automatically
  Disables the user installed fonts
  Delete font caches, hiding the kernel and other files of the system cache
  Together, these changes can help resolve or isolate issues related to your startup disk.

  Try safe mode if your Mac does not end commissioning

  After successfully started upward in safe mode, check to see if you have any login or startup items. Here are the apps that run as soon as you turn on your Mac and continue to run in the background that can slow down the performance of your Mac.

  macOS Sierra: If you think you have incompatible connection points

  You can also check that your Mac has enough disk space for the smooth Sierra BONES. Under macOS Sierra, it's easier than ever to free disk space! Take a look at this link. Information System for Mac: optimization of the storage on your Mac

  Once these tasks are completed, restart your Mac normally and then test the performance. I'm sure you'll see a difference. Please use the Apple Support communities to post your question.

  Good day.

• I have a random program crashes, please advise...

  I have a random program crash when changing tabs. I have also problems to copy an image on the internet and then paste it anywhere. I'm able to do when I use Internet Explorer, but I can't do when using Firefox. It allows me to copy, but does not give me the paste option.

  When you try to paste the image?

• I installed El Capitan.  Now the e-mail program crashes.  Suggestions?

  I installed El Capitan.  Now the e-mail program crashes.  Suggestions?

  Try this:

  Repair the hard drive and permissions - El Capitan

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Download OS X El Capitan 10.11.3 Combo Update and reinstall.

• Kodak EasyShare program crashes at startup since recent El Capitan update.

  I recently did the update for the El Capitan. My Kodak EasyShare program crashes on startup and cannot send a crash report.  Help someone?  Thank you.

  It seems that you need to find a different application - it's Kodak to 2013:

  http://support.en.kodak.com/app/answers/detail/A_ID/16433/selected/true

• Why my games crash immediately after clicking on the icon?

  original title: After double clicking on the icon of the game, the problem windows window appears and says it checks for a solution.  I can't understand how to solve this problem.  It does not occur on all games.

  Why my games crash immediately after clicking on the icon?

  Hello
   
   
   
  1. what game you play when this happens?
  2. have you ever run properly on your computer?
  3 did you changes to the computer recently?
   
  
  Method 1.
  Play this game in the clean boot and then check if it works very well.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
  
   
  Method 2.
  I would like to look at the logs of the same observer. Here's how you can pull up the newspapers:
  Type eventvwr.msc/s in the address bar.
   
  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.
   
  For more information on event viewer, see the articles below:
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
   
  I hope hear from you soon!

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Multisim program crash of database

  Everytime I open the database manager in Multisim 12.0 and click on the tab component the program crashes. If I click on the components tab RLC it seems to work correctly. Someone at - it happen? Is there a quick fix? Thank you Kim

  Ok. It took a few tries, but it worked. I have tried to merge back or something because when I was she had a database empty with the size of 1 K. I did it again and it worked. I have all my files in the right places now and all my components excellent work. The merge process must a littlle bit more explanation I think.

  Much Chen and yours thanks for your help.

  Kim

• Photosmart 3100 series causes of program crashes

  I have an old HP Photosmart 3100 series printer that I have used for years. I recently installed in a Compaq HP refurbished win7 Pro. I downloaded the drivers, which I've done it before several times, but the printer will not work correctly. Whenever I turn on the printer, it automatically displays the 'test' page, which is used to align the cartridges. When I type something in any program (Wordpad or Open Office) text the text of program crashes. I did little to uninstall/reinstall, but the same thing happens. The printer IS set as the default printer

  Hi the casryjr8706, you can use the driver supplied with Windows 7.

• Why CRYSTAL_REPORT program does not work with windows Vista? __

  Why CRYSTAL_REPORT program does not work with windows Vista?

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Why my computer crash when I play Minecraft?

  Why my computer crash when I play minecraft?

  Original title: the computer crashes

  To allow someone to help you, you must provide additional information.

  For example:

  -How and when it crash (i.e. it just do not start, or the game starts and then crashes to the desktop, etc.).

  -Are there exact error messages or error codes?

  -What are the specifications/brand/model of your PC (RAM/CPU/GPU, etc.)

  If the game is designed for an earlier version of Windows (e.g. Windows XP) have you tried compatibility mode to see if it works OK. Or try to install the game via this mode as well.

  In the meantime, does that help? (found through a search fast V forum)

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/Minecraft-does-not-work-with-Windows-7-or-my/6f7b5f4a-ed2b-4583-93aa-b3a161d69f77

  But you can be better to ask here (if you have not already done so).

• I have a problem with IBM Lotus Symphony - the program crashing several times every 5 seconds

  Original thread - I have a problem with IBM Lotus Symphony.  I am trying to edit a document, and I can't get any task done without the program crashing several times every 5 seconds.  What can I do to fix this?

  The program crashes every 5 seconds.  I started having this problem last night, but I didn't even know that first of all, there was a problem until today.

  Hello
   
  
  You receive an error message/code when you edit a document in IBM Lotus Symphony?
   
  
  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.
  Note: when you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.
  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.
  If the problem persists please contact the IBM Lotus Symphony support for assistance. See the link below.
  http://www-03.IBM.com/software/Lotus/Symphony/ForumnsHome.nsf/home
   
  It will be useful.