Why my screen is black when I turn on my computer?

Similar Questions

• Why Windows Firewall always stops when I turn on the computer - even if she did before? How can I keep it on recommended setting when I shut down the computer?

  I always change the tuning parameters recommended on Windows Firewall, when I turn on the computer, otherwise it reads in red writing "Windows Firewall does not protect your computer." The network location is the Public network.

  Hello
  If you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/
  Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042c
  I hope this helps you.
  Brian

• Why my screen is black when I let it idle

  whenever I'm on a website online, even yahoo mail etc, and offline, if I stay inactive for a short period of time my screen goes black.

  Hi vitobracciodieta
   
  Perhaps you set the screen saver white to appear at idle time. Therefore, your screen turns white at the idle time.
   
  Set the screen saver as None for this problem.
   
  a. open the screen saver settings by clicking Start, clicking Panel configuration, appearance and personalization, customization, and then click screen saver.
  b. in the screen saver, in the drop-down list, click the screen saver No.
  c. click on apply. Click OK.
   
  For more information, see:
  Change screen saver

• Why my screen goes black when I select display full screen of a video?

  Whatever the source, youtube or a video from a news feed, my screen is always completely black when I choose to use the full screen.  What is an Adobe problem?  Control Panel?  Help, please!

  Whatever the source, youtube or a video from a news feed, my screen is always completely black when I choose to use the full screen.  What is an Adobe problem?  Control Panel?  Help, please!

  Update your graphics card driver.
  Visit the manufacturer's Web site to download and install the latest compatible driver graphics card.

• Why my screen goes black when editing?

  The last month or so, when editing in Photoshop CC on my Mac 10.6.8 the screen goes completely dark. For a while I thought it was a problem with my computer, but then went into account it only happens when I don't work in PS.

  I did some research and noticed some people suggest the update driver video or GPU or something like that. I'm not a techy kind of person. I wonder if it's my solution, and if it is, how would I go to do this?

  Thanks a lot for the update

  CC of Photoshop requires minimum 512 MB of video memory dedicated computer. Recommended 1 GB

  You have 256 MB. I advise you to set the basic drawing mode

  Also consider upgrading your computer for optimal performance specifications.

  Concerning

  ~ Assani

• I received a message stating that resources were low. Computer has crashed and when I turned on the computer had black screen

  Original title: drive full D... computer laptop unusable

  I have a HP Pavilion dv7 laptop... computer.  Two months ago I saved mistakedly C drive to D drive.  I soon messages that D was 85% full... knew that I'd made a mistake... bul everything seemed OK.  Has nothing on this subject.  Yesterday, I received a message stating that resources were low.  Computer has crashed just after that.  The computer turns on with only a black screen.  Pressing F8 does not start in safe mode as it does on my PC.  Can someone help me?  Thank you!

  Hi SteveKinney,

  ·         What version of Windows is installed on your computer?

  ·         What is the exact error message?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Start in safe mode and do a System Restore to a point before the show.

  See Advanced startup options (including safe mode) for more information about starting in safe mode.

  Method 2: See the following articles and check if the problem still persists.

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  See also the article mentioned for more information:

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  I hope this helps.

  Thank you all... I brought to a repair shop... He says that the LCD is toasted, the date is displayed correctly on another monitor.  About $200.

• my screen goes black when I connect and when I try ctrl alt del it don't work

  my computer of solid work for the 1 year I got it but not when he just started having problems when I try to connect normally, I sign, but then the screen goes black and all I see is a slider and I try Ctrl-alt-delete but an error msg appears saying: I can't get to the settings of Microsoft security I tried running a virus scan , but it was cancelled way quarter in I need help

  Hello

  Did you do any changes to the hardware or software on your computer before this problem?

  See the methods:

  Method 1:

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  See also:

  Windows Vista and Windows 7 black screen on computer unlock

  http://support.Microsoft.com/kb/2431700

  Method 2:

  Launch the virus in safe mode with network scan.

  Step 1:

  Start your computer in safe mode with network.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  NOTE: see 3 from the link above, Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Select Mode safe mode with networking.

  Step 2:

  I suggest you run an antivirus scan using the Microsoft Safety Scanner to confirm that your computer is free from any infection by the virus. Please find the link below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Hope the information is useful.

• When I turn on my computer, I get a blank black screen and must disable it again.

  When I turn on my computer, I get a blank black screen. Then, I turned off the computer and turned it back and a message says turn on in safe mode, safe mode with networking, or safe mode with command prompt.  I turned on in safe mode with network, then I got a message saying check your network settings or material in your control panel, but I don't know what to check. Then I did a system restore to an earlier date. Everything was well computer works well again. Then when I turned on my computer this morning the same thing again. I did the same restore to an earlier date and then was able to use my computer. Someone at - it ideas why this happened? the computer worked fine until two days ago. I use windows xp home addition.

  Hi jantravis,

  ·         There were no significant changes made on the computer before the show?

  ·         Have you installed new software, hardware or Windows updates?

  ·         You get any message on the computer when the problem occurs?

  ·         What is the exact message that you receive in safe mode?

  Check to see if this article helps you.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

• Black screen when I turn on the computer, press F1 and error message: disk hard imminent failure

  Original title: crash is immediate please help

  When I turn on my computer laptop black screen saying I have to press F1 to continue, it says after that... disk failure hard immenent what can I do besides spend more than 200. OO, I don't?

  Hello

  Chances are the hard drive failed, but it could be wiring or other materials.

  Check with the system manufacturer's support, their documentation online and ask in their forums
  (if any). Most have instructions to replace the hard drive.

  You can usually buy a hard drive for alternatives for less than $100,00 and maybe much less. Or the other
  get the same one or the same size.  System manufacturers usually several models if you
  the same can buy cheaper. And there will be others who are of the same size and type which
  can be used. Your local computer store can help select an appropriate player.

  Here is an example of how to replace the hard drive on some HP computers for example. Most
  other manufacturers are similar, and there are many generic examples on the internet.

  HP - replace a laptop hard drive
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=CA&DocName=c00649950

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Black screen with cursor just after turning on the computer in Vista

  When I turn on my computer, it's just a black screen and the cursor. I can move the cursor autour, but I can't go any further. The same thing happens in safe mode. Help, please! :( I tried to repair vista with the installation cd, but it is no problem. I searched around the internet and many people have the same problem, but I can't find a solution to this! Please help me! :(

  Hi SiljeRypern,

  Please see the thread with a similar problem and fix possible:

  http://social.technet.Microsoft.com/forums/en-us/itprovistadesktopui/thread/06881a84-595e-40b0-96CE-87cb7a1874ef/

  I hope this helps!

• Alienware x 51 r3 crashed to the Alienware logo screen when I turn on my computer first time every day.

  My new r3 Alienware x 51 will not start windows when I turn the first time on the computer in daily life.
  When the Alienware logo is displayed on the screen, the computer will not load. (No loading cycle appears under the alienware logo). Then the screen becomes black. Keyboard and mouse lights are turned off. Some time, the screen becomes blue background of windows, then the loading cycle does not work any time more and some, the screen has crashed on the Welcome screen of win 10. However, when I turn off the computer and start again immediately. It works normally. If I switech it off and then start it about 2 hours later, the computer will crash again. Every day the first time to activate it, I have to run it twice.

  I used Dell diagnostic software to search the computer, everything is OK. But it's my second X R3 51 during this period of a month. The last graphics card problem, I switched to this one. But the other also has the same problem. Therefore, in my view, it is that my other hardware problem? I connect a keboard Corsair K95 RGB, G502 mouse, joystick Thrustmaster and a saitek rudder. I used a USB 1 4 adapter to connect some of them. The X 51 system is widows 10. I've also used these materials with a X 51 R2 two years previous. Never encounter this problem.

  Got my X R3 51 in December. All of us have had this problem of gel. I "think" what fixed my X 51 R3 rose dating drivers for Intel hardware. Download and run Iobit Drive Booster or snail Majorgeeks.com driver and see if it helps.

  ATTENTION:

  If you use Iobit Drive Booster, uncheck download AdvancedSystem care before installing the Booster Drive. AdvanceSystem Care blocks every time my hard drive.

  Snail by car is easy and secure.

• When I turn on my computer the top of the search at the top of the screen box disappeared what happened?

  I have no tabs search at the top of my screen when I turn on my computer. I don't know how to fix it. research all at the top of the screen disappeared.

  Hi Martha,

  1 Windows operating system you are using?

  2. in what area of research are you referring? It is on Internet Explorer or any other application?

  3. did you of recent changes on the system?

  If you use Internet Explorer, then what version of IE are you using?

  You can press F11 and check if you are able to get the search options

  If you encounter the problem with Internet Explorer, then you can also consult the following articles and check.

  Search with the address bar in Internet Explorer 9

  Customize the Internet Explorer toolbars

• Acer aspire screen shows nothing when I turn it on

  When I turn on my computer the screen shows nothing except some clear blue... before this happened I was check some flash drive and check out what they had and remove them safely, but on the 3 drive flash the screen started showing the random colors at all goes horizontal like a rainbow... .then I had worries and immediately shut down the computer

  Acer aspire 5742z

  window 7

  

  Hello

  You have the same problem with an external monitor or LCD TV using VGA or HDMI port?

  [Fn] + [F5] - display toggle: switches display output between the screen display, external display (if connected) and both.

• When I turn on my computer, it gets stuck on the ultra-portable gigabyte 3 screen and custom which leave me there 2 hours still no luck the only button that works are TAB rebooting too

  Original title: stuck

  When I turn on my computer, it gets stuck on ultra-portable gigabyte 3 screen and custom wide movement which I gave 2 hours still no luck the only button that works are TAB restart too it can someone help please

  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• When I turn on the computer, it does not show my office. It comes up with a white screen

  Original title: bad start.

  On May 15, 2013, I was prompted to download 8 updates from Microsoft. Since then when I turn on the computer, it does not show my office. It comes with a white screen. The only way to see the desktop is at the stop 'wrong' to turn off the power to the computer. Then I reboot, it just asking if I want to boot up normally, I say Yes and all is well on the office. Seems related to downloads of May 15, 2013. Any ideas?

  Hello

  Method 1:

  I suggest you to select last known good Configuration in Windows Advanced options and check if it works.

  To do this:

  a. restart the computer and press the F8 key for about four to five times.

  b. you will see the that last known good Configuration in the Advanced Windows options.

  c. Select last known good Configuration and press enter.

  Method 2:

  See the article and check if that helps:

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  For more protection, use System Restore backup and restore, which is designed to help save email, photos, documents and other personal files.

  Note: when checking your drive hard for errors, if bad sectors are found, it tries to repair this sector and if all the available data may be lost.

  Let us know if it helps.