Why my tag section for images get repositioned AFTER the image?

Similar Questions

• Why I do not have a button "nearby", after the upgrade to watch OS 2.2

  Why I do not have a button "nearby", after the upgrade to watch OS 2.2

  If you are referring to the card program, I have this button on my screen.

  

• I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do

  I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do?

  Hello

  Your question is beyond the scope of these forums.

  Please use the following links for that matter.

  Network Infrastructure servers Forum:
  http://social.technet.Microsoft.com/forums/EU/winserverNIS/threads

  Category of the Windows Server:
  http://social.technet.Microsoft.com/forums/EU/category/WindowsServer

  Concerning

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED".

  original title: HELP... (seniors not if nobody PC)!

  Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED" and then it lands in the updates page... So I used the Microsoft Fix - it tool and she is 'THE PLACE WHERE WINDOWS STORES DATA has CHANGED AND MUST BE FIXED... CHANGE OF PLACES in UPDATE from WINDOWS to THE SETTINGS by DEFAULT in WINDOWS'... well I think, but I don't know how the making and tool Fix - it didn't tell me how is... Please someone can help me to what is necessary.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2:

  Try to download the update from this link and install the update manually and check if it helps:

  http://www.Microsoft.com/download/en/default.aspx

  It will be useful.

• URGENT::opening multiple files - i have 3 files in my directory... When I run the code I can open a file and read it... but the while loop get blocked after the first iteration... can someone me help or give some indications

  bbmChatDB of public database;

  public static FileConnection fconnRead = null;
  public static String fileReadData = "";
  public static InputStream is = null;
  data Byte [] = null;
  DataInputStream is = null;

  Here is my code...

  I have 3 files in my directory... When I run the code I can open a file and read it... but the while loop get blocked after the first iteration... can someone me help or give some indications

  try {}

  FileConnection fc = Connector.open("file:///store/home/user/documents/BSM/") (FileConnection); "

  If (fc.exists ()) {}

  Enumeration e = fc.list ();

  While (e.hasMoreElements ()) {}

  System.out.println ("files are:" + (String) e.nextElement ());

  play this file
  StringBuffer stringBuff = new StringBuffer();
  try {}
  System.out.println ("opening file")-;
  System.out.println ("file name is:" + (String) e.nextElement ());
  fconnRead = Connector.open("file:///store/home/user/documents/BSM/(String)e.nextElement(),Connector.READ_WRITE) (FileConnection);
  System.out.println ("data length")-;
  If (fconnRead.exists ()) {}
  is = fconnRead.openDataInputStream ();
  data = IOUtilities.streamToBytes (is);
  Ddd = new String string (data);
  fileReadData = ddd.toString ();
  System.out.println ("length of data:" + fileReadData.length ());
  System.out.println ("read data :" + fileReadData);

  }

  } catch (IOException ee) {}
  ee.printStackTrace ();
  System.out.println ("Exception in the read data :")
  + ee.getMessage ());
  }

  }
  }

  } catch (IOException e) {}

  e.printStackTrace ();
  }

  {Finally

  try {}
  If (is! = null) {}
  is. Close();
  }
  System.out.println ("is closed...");
  } catch (IOException e1) {}

  E1. PrintStackTrace();
  }

  If (fconnRead! = null) {}
  try {}
  fconnRead.close ();
  } catch (Exception e) {}
  System.out.println (try ());
  }

  }

  }

  You can recode this treatment so that it uses only:

  e.nextElement ())

  Once a loop iteration.

  Directly at the start saying something like:

  String fileName = e.nextElement ());

  and use fileName everywhere in your loop.

  Also be aware that printStackTrace() will do nothing in your situation, it only works if you catch Throwable.  So make sure you something output all your catches exception and also have a catch (Throwable t) to catch the things you miss, as follows:

  {} catch (Throwable t)

  t.printStackTrace ();

  System.out.println ("Eception exception:" + t.toString ());

  }

  I think your code is thrown an exception and you don't see it.

• Computer hangs for 15-20 minutes after the start of Windows - WinXP SP3

  Whenever I start my computer, once Windows has started (all the desktop icons have appeared), my computer treats something for 15-20 minutes, but I don't know what it is.  It freezes my computer for 15-20 minutes.  I don't have a lot of many software installed and there is no popup windows saying that some updates are being installed.  I have Win XP SP 3.  Can you help me?

  Hi KMForward81,

  ·         Have updates you installed?

  ·         You get the error message?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Run the disk check to check for possible errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  Slow PC? Optimize your computer for peak performance

• Why can I access Indesign is no longer after the update until 2015?

  I am currently charged monthly for a single application, Indesign, and today I've updated to version 2015 and now can't access the program. My account shows no more than my subscription and asks me to sign up again. I was just billed August 21, 2015 and using the program yesterday. After the updated 2015 I seem to have lost my access and membership. I don't wan to register again and be doubly charged monthly.

  I checked my account information. Sent to adobe a note on Facebook after going round in circles trying to get help from cat, who does not see to exist today (tried it on several browsers)

  I'm on an iMAC with Yosemite.

  Hello

  You can refer to the instructions in the links below:

  Connect and disconnect activate Cloud Creative applications

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Activation and deactivation of troubleshooting

  Creating cloud connection errors

  Let us know if that helps.

  Kind regards

  Bani

• What is the grace period for Software Assurance renewal after the expiry

  What is the grace period for Software Assurance renewal after expiry?

  What is the grace period for Software Assurance renewal after expiry?

  Hello

  We cannot help with this question.

  You must contact the dealer who sold you the subscription.

  More information is at the following link.

  Microsoft - Microsoft Software Assurance Volume Licensing:
  http://www.Microsoft.com/licensing/software-assurance/default.aspx

  Concerning

• Windows Explorer hangs for a long time after the installation of the latest updates from Microsoft

  Hello!

  Yesterday, I downloaded and installed the latest Windows updates on the Web from Microsoft by using Windows Update.

  After that, I see a strange thing from time to time.

  Sometimes when I open Windows Explorer or on a list of logical drives reader app, the hangs of the application for 10-15 minutes (not answer).

  While it hangs, other applications can function normally if they don't read the list of drives, for example, I can use Internet Explorer at the same time.

  The appearance of the problem is unpredictable, it can happen after 10 to 20 minutes of work after the reboot, or even after 1-2 hours of labor.

  My OS is Vista Home Premium x 64, laptop Pavilion dv7 - 1157 cl.

  At the moment I don't have any antivirus software or third party drivers (I configured factory drivers only).

  Event log Windows contains no error messages, all devices are displayed in device in the form of work normally without errors management.

  I ran the test of memory with the memory diagnostic tool, it found no errors.

  Here is the list of the installed Windows updates.

  Do you have any suggestions? There may be a problem already known with some updates?

  Message edited by Gleb on 14/05/2009 08:38

  I'm surprised, there is no answer at all.

  Well, the problem has been successfully resolved by installing Vista SP2 RTM. My test program has been run 20 hours and showed no delay.

• WebCenter content get lost after the redeployment of the application

  Hi all

  We have a portal web Center running application to our company. After it has been deployed in the production environment, a member of the admin team added some content on some pages using the Oracle WebCenter Portal administration Console. Now, there are a few requests of change that we are working on the same application. Every time we complete the change and it is deployed to the integration and Production environment, content published by the administration team is lost. They are having to redo this content on this page on any redeployment of the application. It always happens in integration / prod environment. Is there a way, that when redeploy us the application, we do not replace the content already added to the pages of the application?

  Or do we need to perform the same content in the Jdeveloper environment and produce some deployable for this be packed with deployment files? Please let us how we can resolve this situation. Thank you.

  Kind regards

  Anitha

  Hi all

  We found what was the problem that was causing the above behavior. According to the guidelines of this doc (WebCenter portal deployment: Applications Framework - 11 g Release 1 (11.1.1.6.0)), all content added to the pages, should be retained even after the redeployment. Only changes made to the navigation model must "round-trip on development." Added content on the pages after that initial deployment runtime does not "round-trip on development."

  The question was essentially in the way in which the application has been deployed. Each time, the new version was to be deployed we were not deployment out the version of the application and the deployment of the new version. Now, we have used "Redeploy" option to deploy the release. This fixed our problem. The content is now kept after the new deployment version too. It was also important to use the same MDS and Partition repository for deployment after the addition of the duration of the content to the pages.

  Kind regards

  Anitha

• Popup is get closed after the entity level validation error.

  Hello

  I have a requirement where I am creates a line entity in a popup. In the context menu, I have an attribute which is mandatory under certain conditions. To do this, I said that EO level method validator that checks if filed value is entered or not when it is required.

  This validation happens correctly, I am able to see the error message in the user interface. But the problem is, popup closer, when I click on ' save record ' (this button calls the validation logic for the record) button in the user interface. " Becuse in the logic of the 'save' button, I close the popup (appellant hidePopup) after committing the registration. But it should only occur when the validation is successful. But it happens the same validation is not as successful. I mean, after the validation logic that he goes to the next run of line code. And the error message is displayed only after the execution of all the lines inside the method of the Save"" button.

  How can I limit the logic of hide popup on successful validation.

  Jdev version: 11.1.1.7.0

  Kind regards

  Dietsch.

  Hello

  When you run the validation operation programmatically try to see if there are errors;

  .

  .

  .

  operationBinding.execute ();

  If (operationBinding.getErrors () .isEmpty ()) {}

  Without exception, the operation is success

  } else {}

  Exception is thrown by the method, handle it here

  OperationBinding::getErrors() return list of local

  The list of errorList = operationBinding.getErrors ();

  Alternative route ' on error ' go here

  }

  If there is no error not to close the popup while if there isn't one, then close.

• How to get CC after the installation of CC2014

  Here at work all our workstations have been upgraded to CC when that came out. CC2014 then when THAT came out. Since then, we have added a new workstation and it seems we can only install CC2014 on it and not the first CC version. We work with many versions on a daily basis (all CS3: CC2014), so we have to CC on this workstation as well. But when you go to the creative cloud Panel is simply not available.

  Get off at the Cloud Desktop App Designer. Click the Apps scroll up until you see the filters & Versions (or applications) on the right. In the menu choose the previous Version.

• How can I add tags alt for images in my list of web app?

  I have to add the path to the image?

  Just learned that this will help my SEO...

  Thank you!!

  j.

  But if you use _value aspect to render the tag you can form the image element yourself...

  

  Where the custom text field, you can create to allow people to add the alt text, or have a default one.

• Why isn't Firefox for Mobile is available on the Android Marketplace?

  I can't download it to my AT & T phone because it is blocked.

  On some devices supported, a bug in the software of the market prevents Firefox from appearing. This seems to be fixed in the latest version of market, which began deployment to users this week. For more details, see https://bugzilla.mozilla.org/show_bug.cgi?id=621015

  Or, if you have a compatible phone, you can download the application directly from http://bit.ly/fxbeta3

  (Note: to download the application directly on an AT & T phone, you need to search to get instructions on how to file "sideload" APK, because AT & T disables the option to install from sources non-market.)