Windows Explorer hangs for a long time after the installation of the latest updates from Microsoft

Similar Questions

• After the latest updates from Microsoft, my Internet Backgammon supplied with Windows 7 no longer works. It is a dead link and the game opens same. That's happened?

  I like to play trump stings on Internet and Internet Backgammon that's installed with Windows 7, Home Premium edition.  However, after the automatic updates installed yesterday, I noticed that the link to play the Internet Backgammon is no longer works.  It's just a dead link.  I can click on it, but nothing happens.  Not even an ounce of trying to open.  It's just 'died '.  I can still play trump stings on the Internet and I have no trouble to access the internet, so I wonder if this is just a small problem or do you have Microsoft remove Internet Backgammon as one of its windows games?  Note, this is Internet Backgammon that is installed on the computer, in the folder games - it is NOT the version of backgammon on MSN that you actually go to the internet and to play.  I am referring to the one in the Games folder, which is installed with Windows 7.  I play this game almost every day, so I hope that it will be restored.  I wish there was a way to contact Microsoft about this, but there isn't and they charge, then...

  Hi Kentuckywoman,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are facing problems with the game of Backgammon Internet. I'll be happy to help you in this problem.

  -What are the updates installed recently?

  Method 1: I suggest you to perform system restore and see if it helps.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Method 2: If the problem persists, I suggest to uninstall and reinstall the game, then check if the problem persists.

  Step 1: Uninstall the game:

  (a) go to Start and in the search type' features on or off Windows activate'.»»

  (b) click on "turn Windows features on or off". ""

  (c) develop the games, Internet games and uncheck the brand in front of Backgammon Internet.

  (d) to restart the computer.

  Step 2: Reinstall the game:

  (a) go to Start and in the search type' features on or off Windows activate'.»»

  (b) click on "turn Windows features on or off". ""

  (c) develop the games, games on the Internet andcheck the mark in front ofBackgammon Internet.

  (d) to restart the computer.

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Notifications no longer work after the latest updates.

  As the title suggests, notifications for email, applications, pop etc. is no longer at the top right and no audio playback.  He grew up in another forum, so I'm posting here too.

  And before ask you, yes notifications are turned on and the audio clips are selected in the sound theme.

  Hello

  You are facing problems with notifications on Metro and audio applications after installing the updates.
   
  -Updates you installed recently?
  -You have all updates are installed on your computer?
   
  Method 1: I suggest you run the troubleshooter App from the link and if it helps.
  http://go.Microsoft.com/fwlink/?LinkId=268423
  
  Method 2: I also suggest you to follow the steps from the link and check if the problem persists.
  What to do if you have problems with a soft
  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app
   
  Another reference:

  http://Windows.Microsoft.com/en-us/Windows-8/how-manage-notifications

   
  I hope this helps.

• My computer is completely messed up after installing the latest updates from Microsoft. I need help/ideas to make it work again.

  Vista Business Service Pack 2
  32 bit
  2007-12-office
  Acrobat 9 Pro
  Adobe Design Standard CS4
  Sony Vaio

  I installed the latest vista updates today.  Three "important"; an option.  The optional parameter was an update of bluetooth toshiba.  We were talking about "platforms" that made me uncomfortable so I went to Microsoft and after reading it, I decided - based on little understanding - it was probably necessary.
  Shortly after, Acrobat 9 Pro wasn't working anymore. The computer asked me to restart after installing updates, but I have done a couple of things, including some e-mail.  During the attempt to send e-mail until I turned off the computer, Outlook flash he has been restarted and then the icon to install flash and then I could come back and type until the sequence started.

  I turned off the computer and when I rebooted, it did not start.  I managed to get it started; I run scandisk; now, when it starts to get a series of errors from Adobe for various Adobe programs that I installed on the machine all seem related to the "Automatic Setup" (or boot, I don't remember exactly.  I tried to re - install Acrobat and I get an error message that the 'source' is not available, and to ensure that it is - despite me using the installation disc, so I guess that it refers to the 'source' in Vista.  Outlook does not start.  He told me to use scanpst.exe to analyze the .pst files, but they seem to have disappeared.  I have tried other products of office except Explorer who started without problem.

  I can't use restore because it says that the disc is damaged and needs to be checked.

  Any ideas are appreciated.

  Uninstall the update for bluetooth.  Never use Microsoft device driver updates.  To avoid this does not happen, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/.

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.  Who can release the OS to do a system restore or other recovery options.

  Do you know when this problem started (probably with updates)?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  If none of these steps work, transfer your question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in updating the questions will be more than happy to solve your problems.  Don't forget to tell them what updates you downloaded and installed, and what steps you have already done to try to solve the problem.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• Problems after the automatic update from Microsoft Outlook

  A

  about having Microsoft automatic update, Outlook on Vista has stopped working properly. I can open the program, write an e-mail or two and may be able to send a mail, then the program freezes. It happened just after a update to day to day. How can I solve this problem without removing the new updates?

  Automatic updates has also changed all of my Web pages. It's very upsetting. Why? Internet Explorer took over. What was wrong with me. I gave permission to the automatic updates program but does not reset my personal settings. How can I avoid this in the future?

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Outlook Help Forums at the link above.

  They will help you with your Outlook questions when repost you in the Office Forums above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows xp freezes for a long time during the installation of Windows Update.

  Original title: xp freeze during an update... what to do

  I turned on my computer for the first time in 10 days. When stop he went in update mode (21 updates) and was 19, since yesterday evening around 20:00 is this normal and if not what is my next step since he says do not close during an update?

  Hi MarcyDowning,

  If the update is blocked for hours, then you can try to restart the computer and check if it starts in normal mode.

  If not, then try to start in safe mode and try to perform a system restore:

  Step 1:

  You can check the article to start in safe mode:

  A description of the options to start in Windows XP Mode

  Step 2:

  If you are able to boot into safe mode, and then try to perform a system restore and check if you are able to boot into normal mode:

  How to restore Windows XP to a previous state

  Note: When safe mode system restore, system restore points are deleted.

  Once you are able to boot into normal mode, you can try to install the updates in batches containing updates 4 or 5 at a time and check if it helps.

  For more information, see the article:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

• Laptop black screens after the latest updates of windows... wil not booting in SafeMode (black screen).

  Windows Vista 64-bit... Black laptop after the latest updates... windows screens will not boot into SafeMode again black screens.

  Hello

  I would suggest trying the following methods and check if it helps.

  
  Method 1:

  Try the steps in the following Microsoft article and check if it helps.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem:

  http://support.Microsoft.com/kb/934540

  Method 2:
  You can refer to the link below and check the drive for errors:
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Warning: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  If the methods mentioned above do not solve the problem, then it would be best to contact the manufacturer of the computer.

  For more information, see the following Microsoft article and check if that helps.

  
  Why my screen is black when I start Windows 7? (Applies to Windows vista)

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista

• Symantec Antivirus Corporate Edition "scan stopped by user" message after you have installed the latest update of Microsoft Security

  I run Symantec AntiVirus Corporate edition 2002 (build version 8.00.9374). The following problem, I discovered yesterday (May 13) when my analysis system and antivirus weekly update is scheduled: from an analysis of the system, the scan box opens and immediately stops, displays the message "scan stopped by user", followed the date & time and all control buttons are grayed out (not functional) with the exception of the close button.

  The only change that took place in my PC has been the download and installation of the most recent update Security for Windows XP (KB978542) which is described as: "critical Microsoft Security Bulletin MS10-030 - vulnerability in Outlook Express and Windows Mail could allow Code execution (978542) remotely.
  (url: http://www.microsoft.com/technet/security/bulletin/MS10-030.mspx)

  I tried to uninstall the security update; uninstall - reboot - reinstall - Live Update of the antivirus application. do a system restore point to return to the previous week - to no. AVAIL.

  I later identified this same, exact problem on 3 other computers running XP with sp 3 which just installed the latest update from security Microsoft.  I would be grateful to any suggestions on how to remedy this situation.  As a newbie to this forum, I would appreciate if others copy this assignment to other sections of the Symantec and Microsoft sites that could give him this attention important issue.

  Thank you

  Bryan Pepper - send me an email to * address email is removed from the privacy *.

  Installation not to run, such as Microsoft Security Essentials Package.

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My card was charged 26,88 books per month for a long time, but I can not use my products from adobe, which is a member ship fee and how can I cancel it?

  My card be charged to 26,88 pounds per month for a long time, but I can't use any adobe products, which is a membership fee and how can I cancel it?

  Your subscription to cloud appears on your account page?

  https://Accounts.adobe.com/ , then click on Plans & products top

  Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday

• Windows 7 Pro 64-bit not start after the first update.

  Integrated system:

  Motherboard: Version of the BIOS Gigabyte GA-X58A-UD3R revision 2.0: FA

  CPU: Intel Core i7-930

  Memory: 6 GB Corsair PC3-12800 DDR3 Triple channel

  HD: Western Digital Black 500 GB SATA 3 Gb/s

  Water cooler: Corsair H50

  The operating system has been installed and running perfect. Readers for the mobo has been installed and and all is well. I can see everything on my computer, network, disks, programs, Device Manager and etc.

  First update for the system, only the important updates were downloaded and after the reboot, the system will not start. The system to start repairing the system but found no problem and restart again and return to the screen of system repair.

  The operating system has been installed 5 times and I had the same problem after the first update, the system unbootable. I tried to boot from the Windows dvd, but I had the same problem again.

  Can someone help me with this problem?

  Thank you

  M. Vilela

  Hi Danielle,

  In addition to the suggestion of Rock Star, you can try the following steps and check if it helps.

  Step 1

  You can first try to start the computer in safe mode and check if you can boot to the desktop. Access the link below and follow the steps to boot to the desktop. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  If you are able to boot to the desktop in safe mode, you can access to view the history of update on your computer and search for the error code and the updates that failed to install and post it back.

  To view the update history, follow the steps below:

  A. open the control panel (all items view) and click the Windows Update icon.

  B. click on the link to view update history.

  To view the details of a single Windows Update. Select and right-click on a Windows Update list, and then click details.

  Step 3

  I would say also allows you to perform a system restore in safe mode to see if you can restore the computer to an earlier date when it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click on choose a different restore point and then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Access the link below to learn more about how to repair the operating system and how torestore configuring operatingsystem to a point in time earlier in Windows:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Bridge is no longer starts after the last update

  Hello

  After the last update of CC 2015.5 bridge will start is no longer. I get the window that shows that "Adobe Bridge CC unexpectedly quit' almost immediately. Of the window:

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0x000000000000000c

  Note the exception: EXC_CORPSE_NOTIFY

  Have uninstalled and reinstalled. preferences ransacked without success. I am running the latest version of the operating system. CC of other apps that I use (PS, I, ID) seem to work. 5 Bridge works fine.

  Any help would be appreciated.

  Thank you

  Ted

  Hi all

  We published a new version of Adobe Bridge (CC 2015) on July 19, 2016. This update is available via the Adobe Creative Cloud application.

  We addressed some crash bridge issues experienced on the launch of the application. Please try the new version and are looking for the crash problems you encountered.

  If you are not able to locate the bridge (CC 2015) on the creative cloud application, you will need to update the creative cloud application and restart your computer.

  Thank you

  Deepak Gupta

• PunkBuster not working after the latest updates of Windows

  Hello

  Since I installed the latest updates for Vista x 64, I continue to pounce on COD5 with this exception:

  Application CoDWaWmp.exe, version 1.5.1220.0, time stamp 0x4a5241f6, failed module pbcl.dll, version 0.0.0.0, time stamp 0x4a5cb487, exception 0xc0000005, fault offset 0 code x 00026914, 0x5d0, failing application start 0x01ca36117f69c74e process id.

  The problem seems to be related to the Punkbuster client. Before the latest updates, I don't have a problem.
  For Windows XP, a similar problem was introduced with KB917422 (in connection with Kaspersky anti virus I think).

  Any thoughts on this topic?

  Best regards, Wilbert

  SRY, but if PB doesn't work, you don't have to format your PC.
  Just try to reinstall PB.

• Computer freezing after the latest updates of Windows

  Unfortunately the windows restore has no restore points and was not yet active.  AAAAAAHHHHHHH.  I just got this computer last month and it's been great, and now I'm back to being a tech.  Large.

  Hello

  ·         Who were the latest updates installed on the computer?

  ·         The computer hangs or crashes the browser when it is on YouTube?

  You can check the same thing using the link below.

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  You can try to uninstall and reinstall the updates manually and check if this helps solve the problem.

  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  To install the updates:

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Check if there is information in Event Viewer which may help us to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firefox hangs at startup every time after the update. Windows 7.

  Crash ID: 95b523ae-2f5d-4766-8317-9b5092140723

  I've just updated firefox and now it crashes every time I try to open it. Even in safe mode.

  This looks like a problem with the garbage collection (GC).

  • Report of 31.0 Firefox Crash [@ JS::Handle < JSObject * >: operator JSObject * const & ()]

  These questions are usually not easy to diagnose.

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

  Make a check of malware with several malware scanning of programs on the Windows computer.
  Please scan with all programs, because each program detects a different malicious program.
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Computer hangs for 15-20 minutes after the start of Windows - WinXP SP3

  Whenever I start my computer, once Windows has started (all the desktop icons have appeared), my computer treats something for 15-20 minutes, but I don't know what it is.  It freezes my computer for 15-20 minutes.  I don't have a lot of many software installed and there is no popup windows saying that some updates are being installed.  I have Win XP SP 3.  Can you help me?

  Hi KMForward81,

  ·         Have updates you installed?

  ·         You get the error message?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Run the disk check to check for possible errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  Slow PC? Optimize your computer for peak performance