Why my tool pen does?
I recently started editing again, and it happened today.
Gyazo - 3693b60b9b87f381cf27566f1f2bdf96.png
Any suggestions? Thank you very much.
I guess the photo 3 layer is a screen capture mpeg video which took the layer > time > Freeze Frame applied. This could be the source of your problem. If your purge cache does not resolve the problem, try this:
- Apply the freeze frame
- Before dialing move all elements of the new composition
- Draw your mask on the demo
or export the image as a Photoshop file, and then remove the background in Photoshop.
Tags: After Effects
Similar Questions
-
Why the tool pen decided to stop letting shapes on the tour?
I am tracking a series of squares of aerial images of buildings. After I updated my illustrator, the pen tool decided to stop to let me do this in a clean way. For example, I'm doing a sketch for a shopping centre, a floor plan based. I draw a square, my next shape is a rectangle. I hold SHIFT key to allow the tool pen anchor immediately above one of the anchors of the place. Previously, I would, and everything would be fine. Now I'm doing it, and the second that I create my next point, it forces the anchor first outside the anchor of squares. It also leaves not the features overlap each each other. He moves. So instead of having two squares which affect, suddenly 1pt. Where they touch is now 2pt because moving automatically forms without saying me it. So I get my tool of choice to move the points back where I had originally placed. I have no slam on. In fact, it feels almost as if it is anti slam anchors. With glance on this subject makes it even worse. What is going on?
Here's an example, let me remind you that all these places are supposed to be of the same width and with a uniform wall. The stylus moves my anchors in all directions.
Here is an example of how the front worked pen tool I have updated. Each section is an individual shape. But they overlap with ease.
How can it be a bug in Rectangles to live when he said that it is using the pen to create the forms?
Mr Nagoo, I suspect it is because you have "" Align new objects to the grid of pixels"turned on (see the wheel of Transform Panel menu).
-
Why Illustrator change my anchor points and size race randomly when I'm using the tool pen?
Why Illustrator change my anchor points and size race randomly when I'm using the tool pen?
k,
It looks like you might be haunted by the Align attribute to the ghost of the pixel grid.
You can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. It is crucial that the checkbox is disabled completely, not just a - which also count as ticked.
It may be noted that even align with the pixel grid is cleared with all the selected objects, align new objects to the pixel grid is checked as the creation of new objects will result in these new objects being aligned, even when they are created from existing objects that can happen with Pathfinder operations.
You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.
Here is a screenshot of exquisite made per ton in the first post:
-
Well want to can someone help pointing at me - why the tool cuts (for a simple in CS6 path) totally does NOT despite the fact that the layer is NOT locked, OR 'Lock Slices' accidentally on is checked in the menu 'View' Illustrator CS6?
It is the slice tool you are trying. The only wrong.
Use a knife or scissors.
-
Pen tool sometimes does not detect path under cursor for adding a new point
Hi people...
I just create a path with the pen (arrow) tool, but I found when I select a path, select the pen tool and move the mouse on the path to add a point, but the pen tool does not detect the underlying path, and the cursor does not change the pointer with the sign «+» If I click, it will start a new path.
Curiously, in the same example, the tool pen tool changes to the anchor Point tool to remove if I hover over an anchor point on the same path I did not have the Add anchor point tool.
Even more strangely, if I draw an ellipse or draw a path with the pencil tool, select it, select the pen tool, I DO get the Add option anchor when mouseovering path.
Is this a known problem, or am I missing something?
See you soon!
Richard
If Snap to grid is turned on, turn it off.
JET
-
Why any screen recorder does not work on my computer? __
Why any screen recorder does not work on my computer?
Hi I formatted my computer and downloaded all the conditions for this, I downloaded hypercam and installed, I tried to open it in the tool bar and the start menu, it still does not work.
I downloaded another program for recording of the screen, it also did not work, I tried 3 programs, they all did not work
by the way my computer: windows vista service pack 2 and the screen recorders have worked before I formatted my laptop
I need a solution pleaseeeeeeI got this error in the three programs
Signature of the problem:
Problem event name: APPCRASH
Application name: ScreenVCR.exe
Application version: 1.5.34.0
Application timestamp: 2a425e19
Fault Module name: StackHash_b4c3
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception code: c0000096
Exception offset: 02e42a3b
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information 1: b4c3
More information 2: d2a8bebd21e0e9bfa99e084d53ece2b6
3 more information: 74a 3
Additional information 4: 0480b6e0a2e7a1df44ee618ae8d0084fRead our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409Please give me a solution... :(my laptop computers Info
Windows is Windows Vista Home Premium
Intel (r) core (TM) 2 Duo CPU 26500 2.10 GHz
3.00 GB RAM
Mobile Intel (r) 4 Series Express Chipset Family=============================================
Just a thought... maybe your video driver or DirectX needs and update?Have you tried the following applications:
(1) Windows Media Encoder 9 Series
http://www.free-codecs.com/download/Windows_Media_Encoder_9_Series.htmDirect Download Link:
http://www.free-codecs.com/download_soft.php?d=571&s=327First steps with screenshot
Using Windows Media Encoder
http://www.Microsoft.com/windows/windowsmedia/HOWTO/articles/ScreenCap.aspx(2) Microsoft Expression Encoder 4
http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=75402be0-C603-4998-A79C-becdd197aa79Expression Encoder training videos
http://expression.Microsoft.com/en-us/cc197144.aspxVolunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Why PL/SQL procedures does not allow users to enter data dynamically at run time?
Dear all,
I tried to do a procedure that will search for a group of approval in our database that matches.
(1) the number of levels
(2) the number of users by each level
(3) the id of users by level
entered by the user.
I tried various methods to receive user input dynamically at run time, but in vain.
Finally finished my procedure allowing the user to enter the parameters and then executes the procedure, to which these parameters are passed as arguments. (1 variable for the number of levels and 2 userdefinedarrays with the number of users by level and level respectively)
Why PL/SQL procedures does not allow users to enter data dynamically at run time?
Thanks in advance,
Séverine Suresh
HEY, Sebastian,
3035408 wrote:
Hello Sir,
My question is that if I'm going to say, the number of levels 5, is there any way by which, at runtime, the procedure prompts me to enter at the start of the number of users per level. Now as soon as I get the number of users per level can I do the procedure ask me to enter the nicknames of the members of each level. I mean, something like a invite.
Thank you
Séverine Suresh
There is no way to do it in SQL or PL/SQL, because not SQL PL/SQL is a way to get user input. User interaction is a job for your front end, like Zlatko tool suggested in response to #5. If your front end tool is SQL * Plus, you can use the substtitution variables, as Jarkko showed in response #6.
-
Help with the tool pen when moving CS5.1 to CC
I never use PS, but still did not used to the tool pen in CC, especially when compared to CS5.1.
I would be eternally grateful if someone could tell me what I'm doing wrong or how do things!
In CS5.1 I could draw a path with the pen tool, then command-drag on the line between two points to change the shape of the path between these two points. In CC when I ordered-drag path of shape changes but made the way across two points, I am working on.
In CS5.1 only the length of the handles Bezier control altered, in CC length and angle of the altered control handles, which affects the path I want to change.
So what I am doing wrong? I use the pen and the path a lot and I'll have to go back to CS5.1 to do any series and complex path works because I can not familiarize themselves with the new CC pen tool. Help!
Post edited by: Tim Atherton
Also, with the Direct Selection tool selected see if checking force path by dragging in the options toolbar makes a difference.
-
Im having a very strange problem with the tool pen when you use it to hide. I click on my first point, then the second, but after that it turns into adds a Summit. He then added my new points to the wrong places. If I do a new it comp sems to work ok but used to work in the computer that I need. Im working with 3d layers and I noticed this happens when Im right with the camera zoomed really far. If I Zoom out, it seems to be ok. Why would it be? I restarted hold SHIFT comm option, but he did not make a difference. What should I do?
If this thread is a year old, I found it all in troubleshooting, adding in case it helps others.
I met the same problem as Arrakis, and I just thought of it: I had the layer I drew the mask akin to another layer that had been set to scale upward, so the value of effective scale of the layer, I was trying to hide was very small (but the largest scale of parenting). AE is obviously the treatment my layer as if it were 2% of full size, so all clicks past the other feather are passed to the tool adds-one Summit, despite the fact that the image is enlarged on the screen.
I am sure that the issue was raised in the scenario the OP because 3D only to have the camera zoom before really far, the layer in question should be put on the really small scale.
This happened to me several times in the past, and I've always been mystified, where this is happening to someone else, that's the problem. For me, the fix was again unparent, draw of the mask, then parent. For 3D, you may wish to hide first, then resize it down.
-
New path-layers of all lines with the tool pen?
Hello! I am currently using Illustrator CS6 as a test version, and when I use the tool pen to make a beaver (school work), it all end in a single layer. I want to have a new layer-path of each line with the pen tool, so I can remove rows from the layer panel too. For the moment, it's a layer that has a picture of a beaver, and I can't see the individual lines that I drew. When I used CS5 recently I had no such problem.
There is a setting that I can change or does have something to do with the news of CS6?
If you want to see a 'sex' for each object changes the display of the layer panel by choosing Options from the Panel menu in the layer panel. In the lower part of the Panel options window, make sure that groups and objects are both checked. You will then see a 'sex' for each object.
I quote 'sex' here because technically they aren't the layers. They resemble layers and are in the layer panel, but they do not exactly allow options that allow actual layers. You can select and move objects in the Panel this way however.
-
Hello, I drew something. I need to draw a line using the Tool Shed connected to a point I have already made. How can I continue with this point again.
Additionally, sometimes the tool join does not. Why is this?
N ° you cannot connect a closed to an open path path. You can just start at exactly the same point.
-
Question of behaviour tool pen
When I want to draw a line in the vicinity or exactly on a trajectory of filtration the pen tool don't sart a new path access but still the one 'old '.
Read the help:
Disable or temporarily replace the automatic pen tool
You can temporarily replace or disable the automatic change of the addition of anchor or delete Anchor Point tool.
- To ignore temporarily switching, hold SHIFT as you position the tool pen on the selected path or an anchor point. This is useful when you want to start a new path at the top of an existing path. To prevent the shift to compel the pen tool, release shift before you release the mouse button.
- To turn off change, choose the command Edition > Preferences > General (Windows) or Illustrator > Preferences > general (Mac OS), and select Disable Auto Add/Remove.
The pen pointer changes between X and / when I'm at a point nearby, a little further is no problem, but I want to be able to start a new path where I want to start.With or without shift etc. filtration continues by clicking on "new". What I am doing wrong?DanielVersion?
At least through CS3, the pref to remove auto does not affect auto-join infuriating behavior of the Pen, which is what it looks like you're maybe strugging with.
There is an incredibly clumsy substitution for that, too:
Suppose you want to start a new path where a not selected (sheesh! Which is brilliant the idea was that a pen should DESELECTED path editing?) existing path begins or ends. MouseDown beyond a distance of magnetism where you want than to be; Press and hold the SPACEBAR while you drag to the location where you point it to be; then mouseup. The resulting will be the beginning of a new path, instead of auto - join the pre-existing not selected path.
I don't know if this hellish behavior has finally fixed in CS4, or if a toggle preferably was provided, but I seriously doubt.
JET
-
Why my iPhone 4 does not have my last backup?
Why my iPhone 4 does not have my last backup? My 6 has been stolen so I try everything set up on my old iPhone 4. When I tried to restore from iCloud not found my last backup. I backed up my phone stolen defiantly
The backup of the iPhone 6 is not compatible with the iPhone 4. Just a guess.
-
Why my computer is doing every thing appear side dowen?
Why my computer is doing every thing appear side dowen?
If Ctrl + Alt + up or down does not work try:
CTRL + Alty and (F1... F12 keys).
-
Why xbox 360 controller does not work with all pc games
Why xbox 360 controller does not work with all pc games
Ask in an xbox forum.
Maybe you are looking for
-
I don't see my iphoto events account more in the display of the Photo Album
My apologies if this question has already been submitted, but I couldn't find an appropriate solution to this day. Photo app has properly downloaded all my photos from iPhoto and I can see them in Moments - Photos full discovers. However, I used to
-
When I used click the Internet Firefox icon to mount on my home page, the top of the screen gave me directly click on the link my hotmail email a/c. For some reason, which has disappeared. I can always do so via the Internet Explorer icon, but the se
-
Would it not be smarter to cut and edit the OEM for a Macpro 2010 power cable so that it fits in an APC ups on or cut and connect a surge protector power cable so it can fit into an APC out and have all its points of sale back to the UPS?
-
Firefox fully supports 8.1 Windows 64-bit?
On the web, it seems that the Firefox browser does not fully support 8.1 64-bit Windows. Is a version update scheduled which will fully support 64-bit Windows 8.1, and if yes what is the expected output?
-
Unable to download purchased on iPad app
I bought the Stylebook app on my iPhone. But when I try to download same app on my iPad, it shows that it is purchased, but not able to download. Any suggestions? The cloud icon is grey and not usable.