Why my wifi button is not working

Similar Questions

• I was offered an upgrade of windows 10 on my laptop that is running windows 7, but my wifi button was not working when I installed 10 windows so I started 7 what can I do?

  Hello

  I was offered an upgrade of windows 10 on my laptop that is running windows 7, but my wifi button was not working when I installed 10 windows so I started 7 what can I do? It is an Acer Aspire 5920 G (old enough)

  Thank you.

  There could be a problem with the wifi driver that comes with Windows 10. I think that you first need to find the right driver for Windows 10 on the Acer site. Otherwise, you may need to install a usb wireless card.

  Thanks for reading.

• Wifi button does not work after upgrade to windows 7 to windows 8

  Hi all

  I use a computer hp laptop pavilion. My wifi button stopped working after the upgrade to Windows 8. I installed the latest drivers wifi but the wifi button does not work on wifi. Help, please

  Concerning

  Wandi

  Hello

  I use a hp pavilion dv6 7030ei.

  I solved the problem of my wireless button not switching not wifi enabled or disabled. My laptops wifi button now works perfectly.

  I have has been Manager of access devices, then selected, network adapters

  -Click with the right button on intel Centrino Wireless - N 2230,

  -then click on uninstall and then uninstall. Restarted my PC.

  Then bang! my wireless button started working! I don't update this driver up to what Microsoft or intel acknowledges this problem caused by the wifi drivers 8 windows and provides an updated driver that is causing the problem I encountered.

  Thank you all for your comments.

  Concerning

  One_D

• HP Elitebook 8560p: Windows 10: Elitebook 8560p; WiFi button is not working, Wifi - and internal 3G modem does not work

  Mobile: HP Elitebook 8560p
  Bios: 68SCF worm. F.6.1
  Modem: AGERA Systems HDA Modem
  HP hs2340 HSPA + Mobile
  Network: Intel (R) (R) Centrino Advanced - N 6205
  Intel (R) 82579LM Gigabit Network Connection

  OS: Windows 10.0 (build 10240)

  I've updated HP Elitebook 8560p of Windows7 (64-bit) for Windows 10. The upgrade process was successful. Later, I noticed, Wifi and 3 G-internal modem does not work. Sametime, I noticed, that old HP Connection Manager has been uninstalled (or lost?).

  The problem is basically this: Wifi - and connections 3G internal modem does not work. I noticed, that wifi-button has "orange" color and the button does not work? I can't change the Wifi status parameters at the level of the OS of Off to On. That's why assume that the wifi module is on "off"-"State. I found the driver SP7107 (driver Wifi for Windows 10 button) package and I tried to install it. The installion failed because InstallDriver_64, location failed. (In Finnish language. Toiminto InstallDriver_64, may c:\...\WirelessbuttonDriver.inf' / installdrv/force). Is there an instruction manual to install the driver?

  I'm very confused and I don't know really, what is the first cause of the wifi - 3 g-modem internal questions and. I guess, this wifi button is not about root work.

  Can someone clarify why there are not more HP Connection Manager on Windows 10 and I tried to install, but install cancelled due to bad BONES. How can I manage wifi - and States of modem 3g without it?

  If anyone can help?

  A big thank you!

  Sip2sip

  Uninstall the access key and button wireless driver

  Reset

  Open Device Manager, run the dirver update

  shouldn't this go

  Download Connection Manager

  FTP://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66235.exe

  Install the program in Compatibility Mode in Windows 7

• Satellite A100-499 - function for the WiFi button does not work

  Hello, I have a Toshiba Satellite A100 - 499 PSAA9E.

  I formatted my laptop and installed XP with SP3. I downloaded and installed the drivers (in the right order) for this OS of the toshiba - Europe.com and everything is going well except Fn + F8. It is assumed that this combination has toggle Wifi & Bluetooth. When I switch side 'off' position and I press the keys, appears a message saying that I should switch to position 'on' but when I switch lateral position 'on' and I press Fn + F8 it does nothing.

  If I want to disable the wi - fi I have to do it with other methods: the function key does not work correctly.

  Any clue?
  Thanks for the advice (and sorry for my English).

  When the WLAN switch is on orange LED is also on?
  You can scan area available networks?
  Have you tried to use the WLAN without using FN + F8?

• Why my second button does not work?

  I have a slide with two bearings of image and two buttons. The two buttons are of choice and we have a correct message and the other has a bad message. Unfortunately, the second button, the incorrect one, will not show the bad message. Is there something about two buttons in the same space that makes this not work?

  The two buttons have no action other than to show the correct or incorrect answer. I have a separate button, with the stop at the end of the slide, allowing users to click to the next slide.

  Call me frustrated.

  I'll add my own questions.

  Is the message of CORRECT feedback given to the first button when you click on just his own correct legend (with the incorrect caption for this button unchecked)?

  And you expect the message INCORRECT feedback appears for the second button by doing the opposite of above (turn off the correct feedback and leaving feedback legend Incorrect running)?

  Or captions that are supposed to appear when you click on these two buttons appear only through advanced Actions attached to the event on the success of the two buttons?

• Why my Start button does not work?

  Hi guys Im new to labView

  Joined my VI

  My Start button seems to work but when I press start there is no change to my waveform.

  I use a box USB-6009

  Thanks a bunch!

  Prash

  Hi, prash4,

  I think you should change "mechanical action" boot non-verrou.

• Why my sound button does not work on my Macbook Air? New

  I stupidly clicked "Questioned solved" on my last thread, I'm sorry. Here's my problem:

  I have a late 2010 13 inch Macbook Air and when I press on my sound button on my keyboard it does not to do (the image is appearing). Also, when I watch a video with my unpredictable sound helmet goes out and hangs my computer for a few seconds. How can I fix?

  Carolyn Samit proposed that:

  "Disconnect the headset and then see if the prohibitive icon disappears when you press F12 icon."

  Also, open System Preferences > Sound , then select the output tab.

  Make sure you have good sale selected device and the mute box is not checked. »

  And I answered:

  "I did what you said and selected the correct output device but curiously he still doesn't seem to work. The icon disappeared when I pressed the F12 key. You have any other suggestions? Thank you very much. »

  

  Thanks if you can help.

  Hello...

  See if the NVRAM reset help > How to reset NVRAM on your Mac.

  In the future, it is easier for everyone if you stick to your original message

• Why my wifi connection does not work correctly?

  I had problems with my computer for a while. The first problem I had was that after I hibernated my computer it would be even not show me internet connections. I discovered that the hibernation of the computer can sometimes cause this problem. A little later that I realized that even when the computer had not been put into hibernation for weeks sometimes started upward with the same problem. He said networks is not available and there is a red cross on a box where my wifi bars should be. I had to reboot my computer up to 5 times to get the bars will appear. When he did not connect to all pilots and equipment I need to connect does not even appear in the control panel. The other times where it worked the drivers were all there. I don't know yet how this can happen. The other computers in my home connect very well and are able to interact with each other at high speed and get internet just fine.

  Recently, I lost any connection even when I rebooted my computer 10 times it doesn't.

  I came across a thread that told me to access prompt as administrator and type in this

  netish int ip reset

  I was able to connect to my network now, but he says no access to the network or Internet. I also tried typing in this...

  ipconfig/flushdns

  now I can access the internet and communicate with other computers. I tried to play Minecraft while my friend was the host through the router, but the connection was so slow that it was as if I was looking at the past in slow motion. I crossed several times and abandoned. The internet is too slow. It's like I'm on dial upward, but it should be high speed, I don't know what the problem is. What else I can watch on my computer to help me solve this problem? Should I restore it to factory settings? Or is something broken?

  Hi Veronica,.

  Thanks for the reply.

  Sorry to hear about the inconvenience caused.

  According to my understanding, you are having trouble with internet connectivity.

  You upgrade windows or what was the first operating system installed on the computer?

  This problem is mainly due to drivers get damaged.

  To rectify the problem, you will need to uninstall the current network using Device Manager drivers and install the latest drivers from the computer manufacturer site.

  Please refer to this sub article, which will guide you to uninstall the drivers using the Device Manager:

  https://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553572%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  To download the latest drivers from the computer manufacturer site, see the link below:

  http://www.ASUS.com/in/supportonly/U56E/HelpDesk_Download/

  Hope this information helps, for assistance please answer.

• Why my sound button does not work on my Macbook Air?

  I have a late 2010 13 inch Macbook Air and when I press on my sound button on my keyboard it does not to do (the image is appearing). Also, when I watch a video with my unpredictable sound helmet goes out and hangs my computer for a few seconds. How can I fix?

  Disconnect the headphones and then see if the prohibitive icon disappears when you press F12 icon.

  Also, open System Preferences > Sound , then select the output tab.

  Make sure you have good sale selected device and the mute box is not checked.

• Why my screen button does not work

  I tried to use my button page, since I bought my computer and never got to work. I use prtsc ctrl buttons at the same time and it doesn't work.  Anything else I need to do?

  How to use the print screen button

  http://www.ehow.com/how_4780142_use-print-screen-button.html

• The scan button does not work on Windows XP Media Center edition 2005

  Name of the printer: hp psc 1350 all-in-one

  Hi, this is happened since I reinstalled the operating system with an OEM disc, removing all the hp stuff. I got a new OEM drive that comes from hp (I think... well hp stuff works now) but the scan button does not always work. The old record was kind broken.

  I don't mind, but it will be useful, if it could be repaired. Don't want to do something big, would rather just not fix that to do something does not.

  Note: Scanning works, but I have to look somewhere else (e.g. opening scan in the Panel)

  OK, that explains why the scan button does not work.

  The complete software is required for the scan button to work, it is not a feature of the base software.

  Be sure to follow the steps below in order to get is torted:

  1. Unplug the USB from the printer.
  2. On the start menu, enter the HP folder. and follow the link to uninstall to remove the current software.
  3. If you don't find it there, go into control panel > add or remove programs, and remove any software installed HP PSC 1300 series.
  4. Download and install the full feature below:
     http://ftp.HP.com/pub/softlib/software10/COL8901/MP-23606-3/gc_w01_ENU_NB.exe
  5. You will find the Director of HP under the HP software. If you have problems using it, make sure you install the following hotfix:
     http://ftp.HP.com/pub/softlib/software8/COL17377/OJ-46104-1/CIT207355-HPCOM-patch-V8.exe

  Kind regards

  Shlomi

• I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  < re-titled by host >

  Take it to an Apple Store for repair or replacement.

• Why not Firefox 4.0 back button does not work since the homepage or google search?

  I've just upgraded to firefox 4.0 tonight, and the back button is not working properly of my homepage or certain types of google searches.

  I can reproduce this problem every time by following these steps:

  (1) open a new tab, and I get a blank page.
  (2) select the Home button. I find myself at http://www.google.com/ig
  (3) go to the address bar type in a new URI, and press return

  Now, I leave my home page and go to the new page, but I can't go back to my home page.

  Similar behavior happens if I do a search on google for the address of quick search in the upper right.

  (1) start a new tab.
  (2) enter a search term and press enter
  3) click on one of the links to research and you transition to the new page, but the back button does not work.

  It works fine if I do something like:
  (1) open a new tab.
  (2) enter google.com in the address bar and press to enter.
  (3) do a GOOGLES search arae.
  4) click a search result link.

  This works very well for me.

  In my case, I turn off the Add McAfee SiteAdvisor 3.3.1 and the problem goes away.

• Camileo HD menu button does not work

  This msg is a continuation of a previous thread where my Camileo HD screen does not stay on.
  After connecting the camera to a TV screen where I could see, I discovered that the "menu" button does not work although other functions, such as zoom and replay works OK buttons.
  Do you know how to solve this problem?

  > This msg is a continuation of a previous thread where my Camileo HD screen does not stay on
  Why you open new thread so don t follow your first thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=189575