Why not a not running Windows Fix - It helped my computer runs faster?

Similar Questions

• Why not run prinnter canon LBP2900 ON the win.7

  Why not run prinnter canon LBP2900 ON the win.7

  That's like asking ' why not my departure from the car?

  You have not provided enough information.

  HOW TO ASK A QUESTION:
  http://support.Microsoft.com/kb/555375

• Windows Setup could not configure Windows on hardware of this computer Installation error on the new hard drive

  Okay so if please bear with me and be patient.  I'm not tech savvy.  I know enough to be able to remove an old hard drive and put another one, but when there are errors, I don't know what to do.

  Here's the situation.

  I have a Dell Studio XPS with Windows 7 installed.  I started having these notifications that my hard drive could be a failure.  I tried everything that I could find to fix it without having to buy a new HARD drive without success.  The current system has a 1 TB Seagate hard drive.  I installed a memory additional bar thingie right after that I got the computer about 4 years ago.  (If someone tells me how to find the properties of real system, I post them if necessary).  Anyway, I bought a new WD 1 TB black disk hard to install before my old dies and loses all my photos and documents, etc...

  I took the old drive yesterday and installed the new hard drive.  I put back the case and turned on the machine.  I put in my Windows 7 installation disc.  He began installing Windows 7... It's completely past the initial screen where it says it to load it and the other... I had accepted the license agreement, but did not have to make a profile and do the work and the reader.  I hope all this makes sense.  Then it pops up this message "installing Windows could not set up Windows on hardware on this computer."  I couldn't figure out what to do from there.  I got the new drive and put the old one back to and here I am. I tried to find solutions to this problem, but I either don't can't make heads or tails out of the responses on the internet or the solution is not exactly my problem.

  Please help if you can!  And if you have any suggestions, please dumb them down so I can understand what to do.  I CAN do if loaded, you just have to not talk too irritable.  Laughing out loud

  Thank you in advance!

  Maybe not...

  The Windows installation is not happy about something, and since it gets at least started which is a good thing, but your installation problem can not really be with Windows - perhaps something about Dell hardware or your 1 TB HARD drive.

  I looked at your system and found this article that you can read to see if it sounds like your original question:

  Windows Setup could not configure Windows on hardware on this computer.

  http://www.Dell.com/support/article/us/en/19/SLN293812/en

  Since Dell has written an article for help on this subject, it means they've met enough times to take the time to compose the article and put it on their WWW site (but, they say, it is a possible resolution).

  Could you take the issue in the Dell online community where experts hang out (especially your amber light).

  Another good place for support is www.bleepingcomputer.com where there is a similar topic as your question (except Vista) on a Dell and a new disk of 1 TB (also a Seagate) and Dell ideas did not work, but someone else has found a way to fix it:

  http://www.bleepingcomputer.com/forums/t/453378/installation-fails-to-complete-on-new-HDD/

  The bleepingcomputer for your error message search reveals other areas and people who have got things to work in different ways, then it is perhaps another place to look for ideas.

  If the installation still fails it would not hurt to do the BIOS setting and see if things are getting longer, and since you are going to write the current settings before proceeding with the adjustment you can always cancel the adjustment if things get worse.

• I have an Imac - route Safari super, super slow.  Google Chrome fast? - why Safari can't run fast

  I have an Imac - route Safari super, super slow.  Google Chrome fast? - why Safari can't run fast

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• Lost start menu / no. icons on bottom / cannot start in safe mode / can not use windows fix option

  After a restart of my computer I have more a start menu bar or icons on my background.  Things seem to work ok most of the time, but my pc hangs on the blue screen more than before.

  I tried to reset my computer to a previous point of reset but my help and support option does not work and when I use the option in the advanced start-up splash screen it appears that it nothing happens because I find myself with the same State of no start bar or the desktop icons.

  I also tried to start my computer in safe mode, but it hangs and never completes the operation.

  My computer came with an installation disk ever because he has been on a hidden HD (Dell 9200) partition but I can't access it because during startup, it hangs at the same place as my safe mode option blocks so I can't use the windows fix option.

  Can anyone think of anything I can do to fix this?  I got it to work by removing the file Explorer in my window of Task Manager running it again, but this seems to be a symptom of a larger problem because I get the blue screen.

  It is up to you and if you want to wait. You still need a hard disk physically viable well. Maybe you want to just wait and then break the RAID 0, treat readers as being separate and test with the diagnostic utility before installing Win7. You do a clean install anyway.

  I'm really happy with Win7. Just make sure you have the drivers for it. MS - MVP - Elephant Boy computers - don't panic!

• Will not activate Windows Vista on a HP computer.

  The motherboard on my computer went bad and wouldn't even start Windows Vista.  I replaced the motherboard and reinstalled Vista, but when I type the product key for Windows Vista Home Premium OEMAct HP sticker: [redacted key product], I get the message: "the product key you have entered does not seem to be a valid Windows Vista product key.»  Please check your product key, and then type it again.  I'm not able to activate Windows.  Please help me.

  Hello

  Since you have changed your motherboard the system configuration will be different, and this is the reason why you're not able to activate your copy of Windows Vista. I suggest do phone activation and check if you are able to activate your copy of Windows Vista. Click on the link below.

  Check the links below for more information.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activating Windows: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why not run Windows Defender analyzes the calendar?

  I set schedule to run Windows Defender scan at 18:00 on money under standard user account, but I find that there is no digital activity Records.

  Anyone have any suggestions on what evil is?
  Thanks in advance for your suggestions

  Hello Oem,

  Thank you for your response.

  Only security software can run on your computer at a time. Having more than one security software installed at a time and keeping the two race can cause conflicts between them, which can lead to many problems of Windows.

  If you want Windows Defender to run, you must keep one-third of security software disabled. As soon as you turn on the Defender third-party security software Windows by default is disabled automatically.

  Hope that answers your question. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

• Why not arrange window in the logic of distance

  A window arrangement on logical distance would be very useful. Or some way to screenset mac mirrored display selection?

  Why Apple does not have questions we will be asking on Logic Pro?

• My computer says Im running is not genuine windows, but I bought my computer new laptop it was pre installed how I checked it

  I bought this new computer from harvey norman is a sony vaio (I have no idea what anyone else). It came with windows installeded on the computer. now, whenever I start my computer it tells me it is not a genuine copy. How to make this verified as authentic.

  "Tash71" wrote

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Validation caching online Code: N/a, hr 0xc0000022
  Windows product key: *-* - WJ2H8 - R6B6D-7QJB7
  The Windows Product Key hash: ckKNc + BBPDWmo1LUlOkraNjlQ34 =
  Windows product ID: 00359-OEM-8992687-00006
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003

  Other data-->
  SYSTEM >Packard Bellimedia S3810American Megatrends Inc.. P01-A1 20100331000000.000000 + 000

  License data-->
  On a computer running Microsoft Windows non-core, run ' slui.exe 0x2a 0 x 80070426' to display the error text. "
  Error: 0x80070426

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0 x 0001000000000000
  Event timestamp: 3:14:2012 21:25
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered Service: sppsvc

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value

   

  The Service for the Protection of software does not...

  Click Start
  in the search box, type
  SERVICES. MSC
  and press the Enter key - accept the UAC prompt if you get a.
  Look in the console for the Software Protection service, right-click on it and select Properties.
  Make sure that the Startup Type is set to automatic (delayed start) and click on apply.

  Try to start the service now - do you have an error message? It starts? He almost immediately stops again?
  Post back with your results and a new report MGADiag.

  If it doesn't start, then please do the following...
  Please, open an elevated command prompt window (Administrator) and use the following commands...

  net start sppsvc
  sc qc sppsvc
  SC queryex sppsvc
  SC qprivs sppsvc
  SC qsidtype sppsvc
  SC sdshow sppsvc
  
  Copy and paste the results in your response (to copy the results... click the black and white icon in the upper left corner and select Edit... ('Select All' and press the Enter key - and then use Ctrl + V or right click + Paste to paste in your response), and the EXACT error message you get when you try to start the service from the Service Control Panel...

   

   

• Why not all Windows Store applications can be seen?

  Hello!

  I met look an apps on Windows Store.
  For example, on the Windows website, I can see the app Fruit Ninja, but when I click on view in the Windows store, nothing happened, it only shows the House.
  I also tried the Joyride Jetpack which I want to download but I can't download because everytime I open the store, nothing appears, I tried to use the charm of the research, but yet nothing appears.
  Please help me, thanks!

  Hello

  Do you have an error message when you access Windows Store?

  You might be faced with this issue due to a number of reasons such as a corrupt app, apps are not available in your region, change to the date and time, methods of payment etc. I would suggest trying the following steps and check if it helps.

  Method 1: Ensure that the date and time are correct on the computer.

  (a) check the Date/time setting by selecting the tile office and then left click on the time in the corner.

  (b) click on change date and time. And then check that the time zone is correct and the time of the internet tab has the ability to synchronize with the time server Internet.

  Method 2:

  You can consult the following Microsoft article and check if it helps.

  Why can't find or install the application on the Windows Store?

  http://Windows.Microsoft.com/en-in/Windows-8/why-find-install-app-Windows-store

  Method 3:

  If the problem persists , you canfollow the steps to clear the cache to store:

  a. press Win + R on the keyboard

  b. type WSRESET. EXE and click ok

  c. restart the computer

  Please see the following article for more information.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  I hope this helps. If you are facing the issue with downloading the applications from Store or if you face problems with Windows in the future, please let us know and we would be happy to help you

• What is the problem? Why not running successfully?

  I created the project Interact and CoherenceCache class according to the guide tutorial for Oracle coherence (Chapter 7).
  Also, I did the config.XML of cache - according to the tutorial and added to the Run/Debug/Profile the CLASSPATH.
  I added the coherence.jar and the oracle JDBC jar file to the project library.
  
  But when I ran the CoherenceCache class with JDeveloper tool, it displays the following error message:
  

  G:\jdeveloper10\jdk\bin\javaw.exe -client -classpath "G:\jdeveloper10\jdev\mywork\AppInteract\ Interact\classes;G:\jdeveloper10\jdbc\lib\ojdbc14dms.jar;G:\jdeveloper10\jdbc\lib\orai18n.jar;G:\jdeveloper10\jdbc\lib\ocrs12.jar;G:\jdeveloper10\diagnostics\lib\ojdl.jar;G:\jdeveloper10\lib\dms.jar;F:\coherence\coherence\lib\coherence.jar" -Dtangosol.coherence.cacheconfig=G:\jdeveloper10\jdev\mywork\AppInteract\Interact\cache-config.xml com.oracle.coherence.handson.CoherenceCache
  2009-11-02 16:11:44.437/0.437 Oracle Coherence 3.5/459 <Info> (thread=main, member=n/a): Loaded operational configuration from resource "jar:file:/F:/coherence/coherence/lib/coherence.jar!/tangosol-coherence.xml"
  2009-11-02 16:11:44.437/0.437 Oracle Coherence 3.5/459 <Info> (thread=main, member=n/a): Loaded operational overrides from resource "jar:file:/F:/coherence/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
  2009-11-02 16:11:44.453/0.453 Oracle Coherence 3.5/459 <D5> (thread=main, member=n/a): Optional configuration override "/tangosol-coherence-override.xml" is not specified
  2009-11-02 16:11:44.453/0.453 Oracle Coherence 3.5/459 <D5> (thread=main, member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified
  
  Oracle Coherence Version 3.5/459
   Grid Edition: Development mode
  Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
  
  Exception in thread "main" (Wrapped: Failed to load the factory) java.lang.reflect.InvocationTargetException
       at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
       at com.tangosol.net.CacheFactory.getConfigurableCacheFactory(CacheFactory.java:607)
       at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:686)
       at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:664)
       at com.oracle.coherence.handson.CoherenceCache.putCache(CoherenceCache.java:11)
       at com.oracle.coherence.handson.CoherenceCache.main(CoherenceCache.java:21)
  Caused by: java.lang.reflect.InvocationTargetException
       at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
       at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
       at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
       at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
       at com.tangosol.util.ClassHelper.newInstance(ClassHelper.java:662)
       at com.tangosol.net.CacheFactory.getConfigurableCacheFactory(CacheFactory.java:602)
       ... 4 more
  Caused by: (Wrapped: Failed to load configuration resource: G:\jdeveloper10\jdev\mywork\AppInteract\Interact\cache-config.xml) java.io.IOException: Configuration is missing: "G:\jdeveloper10\jdev\mywork\AppInteract\Interact\cache-config.xml", loader=null
       at com.tangosol.net.DefaultConfigurableCacheFactory.loadConfigAsResource(DefaultConfigurableCacheFactory.java:392)
       at com.tangosol.net.DefaultConfigurableCacheFactory.loadConfig(DefaultConfigurableCacheFactory.java:343)
       at com.tangosol.net.DefaultConfigurableCacheFactory.loadConfig(DefaultConfigurableCacheFactory.java:315)
       at com.tangosol.net.DefaultConfigurableCacheFactory.<init>(DefaultConfigurableCacheFactory.java:143)
       ... 10 more
  Caused by: java.io.IOException: Configuration is missing: "G:\jdeveloper10\jdev\mywork\AppInteract\Interact\cache-config.xml", loader=null
       at com.tangosol.net.DefaultConfigurableCacheFactory.loadConfigAsResource(DefaultConfigurableCacheFactory.java:376)
       ... 13 more
  Process exited with exit code 1.

  It does not resemble the space was removed from the classpath.
  -Dave

• If I send to my laptop via bluetooth, why not the windows player

  hopeferully that my question has not been censured...

  You can stream media with wmp, as long as it is on a home network and streaming is on.

  Oops and you have win-7.

• Why does not load Windows Millennium Edition on my computer at home via a CD or a floppy disk?

  After loading either one and system messages, drive the top of the screen is white with no icon to START in the lower left corner.

  My Windows ME Edition user verification number is JRCKQ-3BCMR-TQ4D4-7V36J-9FGGJ. 3WDMV Version1.0 firmware is installed on my computer at home.

  Hello

  Windows Millennium Edition is an obsolete product.

  I suggest you follow the link and check.

  Support for Windows Millennium Edition (ME)

  http://support.Microsoft.com/ph/6519

  How to prepare to upgrade from Windows 98 or Windows Millennium Edition to Windows XP

  http://support.Microsoft.com/kb/316639

  I hope that helps!

• computer will not update windows since 2009, help!

  as soon as you attempt to update this Web site or the computer, this last screen flashes for a split second and he goes. She won't allow windows updates.

  If you have not been able to install updates for awhile in 2009, see...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Why is my cpu running fast when starting windows in safe mode?

  I am running windows xp sp3 when I start my computer in safe mode, which looks like it is about to spin out of control. Does anyone know why this is?

  So if I understand correctly, you do not have this problem if you start normally in Windows; It's only when you play online or when you start in safe mode?

  Most likely your disk defragment tool automatically runs it to scan your drive manually, it said: it is not necessary.
  When you say that the noise that's going to turn out of control are you sure it's the hard drive that you hear? Did you open your computer case to check?
  Usually you can hear only the hard disks if they are read or write and it sounds more like a sound of scratching sound of spinning. Most of the modern hard disks is inaudible and is very hard to hear.
  What is strange, is that you say that is happening in mode safe, but don't not after booting normally. In most cases, it is the opposite where it happens normally, but not in safe mode.
  If all goes well, after further clarification, I have more ideas.